On August 11, 1990 during an ornithological survey at the True/Mid Pacific Geothermal Venture proposed well site No.2, a Hawaiian hawk (Buteo solitarius) nest with a nestling was found approximately 430 feet from the proposed well pad clearing. The U.S. Fish and Wildlife Service and the State of Hawaii have listed the Hawaiian hawk as an endangered species. Future development in this area could be impacted by the presence of this endangered avian species and its nest in such close proximity to the proposed well site. This report summarizes the results of observations at the nest on August 12, 19 and 25 and September 2, 1990.

By accelerating a gas containing suspended particles or large molecules through a converging nozzle, the suspended species may be focused and therefore used to write fine lines on a surface. Our objective was to study the limits on how narrow this focal region could be as a function of particle size. We find that, for monodisperse particles with masses m{sub p} some 3.6 {times} 10{sup 5} times larger than the molecular mass m of the carrier gas (diameters above some 100{angstrom}), there is no fundamental obstacle to directly write submicron features. However, this conclusion has been verified experimentally only with particles larger than 0.1 {mu}m. Experimental, theoretical and numerical studies on the defocusing role of Brownian motion for very small particles or heavy molecules have shown that high resolution (purely aerodynamic) focusing is impossible with volatile molecules whose masses are typically smaller than 1000 Dalton. For these, the minimal focal diameter after optimization appears to be 5{radical}(m/m{sub p}) times the nozzle diameter d{sub n}. But combinations of focused lasers and aerodynamic focusing appear as promising for direct writing with molecular precursors. Theoretical and numerical schemes capable of predicting the evolution of the focusing beam, including Brownian motion effects, have been …

The International Collaboration on Advanced Neutron Sources was started about a decade ago with the purpose of sharing information throughout the global neutron community. The collaboration has been extremely successful in optimizing the use of resources, and the discussions are open and detailed, with reasons for failure shared as well as reasons for success. Although the meetings have become increasingly oriented toward pulsed neutron sources, many of the neutron instrumentation techniques, such as the development of better monochromators, fast response detectors and various data analysis methods, are highly relevant to the Advanced Neutron Source (ANS). I presented one paper on the ANS, and another on the neutron optical polarizer design work which won a 1989 R D-100 Award. I also gained some valuable design ideas, in particular for the ANS hot source, in discussions with individual researchers from Canada, Western Europe, and Japan.

Radioactive wastes are generated at many DOE laboratories, military facilities, fuel fabrication and enrichment plants, reactors, hospitals, and university research facilities. At all of these sites, wastes must be separated, packaged, categorized, and packed into some sort of container--usually 208-L (55-gal) drums--for shipment to waste-storage sites. Prior to shipment, the containers must be labeled, assayed, and certified; the assay value determines the ultimate disposition of the waste containers. An accurate nondestructive assay (NDA) method would identify all the radioisotopes present and provide a quantitative measurement of their activity in the drum. In this way, waste containers could be routed in the most cost-effective manner and without having to reopen them. Currently, the most common gamma-ray method used to assay nuclear waste drums is segmented gamma-ray scanning (SGS) spectrometer that crudely measures only the amount of {sup 235}U or {sup 239}Pu present in the drum. This method uses a spatially-averaged, integrated, emitted gamma-ray-intensity value. The emitted intensity value is corrected by an assumed constant-attenuation value determined by a spatially-averaged, transmission (or active) measurement. Unfortunately, this typically results in an inaccurate determination of the radioactive activities within a waste drum because this measurement technique is valid only for homogeneous-attenuation or known drum …

This report discusses the following topics: the symmetric toroidal array (STAR) spectrometer facility; investigation of the N {yields} {Delta} transition; Hyperon production in the (e, e{prime}k) reactions; investigation of few-body systems with the (e, e{prime}p) reaction; nuclear structure studies with the (e,e{prime}pp) reaction; Measurement of G{sub Em} in a recoil polarimetry measurement; parity violation measurements; and STAR design and performance.

A novel on-board charge system which utilizes a One-Wire'' system for voltage monitoring is discussed and test results obtained using the system are presented. The system consists of a 20 kHz high frequency charger, an algorithm for charging lead-acid batteries with gelled electrolyte, such that gassing is avoided, the control system to implement this charge algorithm and a one-wire battery monitoring system to provide cell/module voltage information to the battery charge controller. Prototype elements of the system have been tested and the system was installed into an EVA Pacer electric vehicle. Charge tests are performed and data taken with the system installed. All elements of the system functioned properly under user conditions. In particular, the charger demonstrated good efficiency, near unity power factor and full programmability. The charge controller functioned reliably and without flaw. The one-wire monitoring system which permits monitoring of cell/module voltages in a battery pack without an extensive conventional wire harness has proven effective and voltage measurements have taken fast enough for control of charging. It was found that for the purpose of voltage monitoring under driving conditions, the system in its present form is too slow.

We describe WARP, a new particle-in-cell code being developed and optimized for ion beam studies in true geometry. We seek to model transport around bends, axial compression with strong focusing, multiple beamlet interaction, and other inherently 3d processes that affect emittance growth. Constraints imposed by memory and running time are severe. Thus, we employ only two 3d field arrays ({rho} and {phi}), and difference {phi} directly on each particle to get E, rather than interpolating E from three meshes; use of a single 3d array is feasible. A new method for PIC simulation of bent beams follows the beam particles in a family of rotated laboratory frames, thus straightening'' the bends. We are also incorporating an envelope calculation, an (r, z) model, and 1d (axial) model within WARP. The BASIS development and run-time system is used, providing a powerful interactive environment in which the user has access to all variables in the code database. 10 refs., 3 figs.

Accounts are given of the two major international conferences on the physics and chemistry of small particles, commonly referred to as van der Waals particles. Details of special interest to Oak Ridge National Laboratory personnel are cited. Information exchanges at Freiburg and Paris are described.

An aluminum piston tank has been developed for applications requiring lightweight, low cost, low pressure, positive-expulsion liquid storage. The 3 liter (183 in{sup 3}) vessel is made primarily from aluminum sheet, using production forming and joining operations. The development process relied mainly on pressurizing prototype parts and assemblies to failure, as the primary source of decision making information for driving the tank design toward its optimum minimum-mass configuration. Critical issues addressed by development testing included piston operation, strength of thin-walled formed shells, alloy choice, and joining the end cap to the seamless deep drawn can. 9 refs., 8 figs.

Purpose [of travel]: To present findings of the Costa Rica Power Sector Efficiency Study to the Instituto Costarricense de Electridad, and to the Ministry of Energy, Natural Resources and Mining. To discuss the progress and plans for the Central American Rural Electrification Project with US Agency for International Development (USAID)/Regional Office Central American Program (ROCAP). Abstract: I traveled to San Jose, Costa Rica to present the findings of the Costa Rica Power Sector Efficiency Study to our counterparts in the utility and the Ministry of Energy. Discussions were held with line level managers at Instituto Costarricensede Electricidad (ICE) and Ministry of Energy Mines and Natural Resources (MIRENEM), as well as a plan of action set for the final stage of the project. Discussions were held for a one day period with both the bilateral Agency for International Development (AID) and the regional AID mission regarding the need for a similar study in Guatemala and matters directly pertaining to the Central American Rural Electrification Study (CARES) project.

None

Research continued on the synthesis of model compounds for coal liquefaction research. This report covers the actual laboratory investigation performed during the reporting period in order to attain the stated objective of the project, viz, the synthesis of a model compound containing tetrahydronaphthalene, naphthalene and phenyl moieties linked by methylene, ethylene and ether bonds. The overall synthetic approach aimed at obtaining the end product has been broken down into three major steps that involve the synthesis of three key reactive intermediates. These are: (1) 3,5-dimethyl-5-bromobenzyl chloride, (2) 1-chloromethylene-2-hydroxytetralin and (3) 2-chloromethylene-1-hydroxynaphthalene.

The kinetics of the reactions of C{sub 2}H{sub 5} radical with Co(NH{sub 3}){sub 5}X{sup 2+}, Ru(NH{sub 3}){sub 5}X{sup 2+}, and Co(dmgH){sub 2} (X) (Y) (X = Br, Cl, N{sub 3}, SCN; Y = H{sub 2}O, CH{sub 3}CN) complexes were studied using laser flash photolysis of ethylcobalt complexes. The kinetics were obtained by the kinetic probe method. Some relative rate constants were also determined by a competition method based on ethyl halide product ratios. The kinetics of colligation reactions of a series of alkyl radicals with {beta}-Ni(cyclam){sup 2+} were studied using flaser flash photolysis of alkylcobalt complexes. Again, the kinetics were obtained by employing the kinetic probe competition method. The kinetics of the unimolecular homolysis of a series of RNi(cyclam)H{sub 2}O{sup 2+} were studied. Activation parameters were obtained for the unimolecular homolysis of C{sub 2}H{sub 5}Ni(cyclam)H{sub 2}O{sup 2+}. Kinetic and thermodynamic data obtained from these reactions were compared with those for the {sigma}-bonded organometallic complexes. The kinetics of the unimolecular homolysis of a series of RNi(cyclam)H{sub 2}O{sup 2+} complexes were studied by monitoring the formation of the oxygen insertion product RO{sub 2}Ni(cyclam)H{sub 2}O{sup 2+}. The higher rate constants for the reactions of alkyl radicals with oxygen in solution, as compared with …

We used computer simulations and experiment to study the penetration of tungsten-alloy projectiles into a thick, armored steel target. These projectiles, with length-to-diameter ratios of 4, strike the target with severe yaws, up to 90{degree}(side-on-impact), such as might be induced in an originally longer projectile by a multiple-spaced plate array. In this study, we focus on the terminal ballistics of these projectiles and ignore how the yaw was induced. We found that the minimum penetration depth occurs at 90{degree}yaw. This case is well approximated by the two-dimensional plane-strain penetration of a side-on cylinder. The ratio of penetration depth to diameter, P:D, for this case is larger than that for a sphere because the plane-strain geometry lacks hoop stress, which is activated in axisymmetric geometry. A more surprising result of work is that the penetration at 60{degree} yaw is only slightly deeper than that of the side-on impact. 8 refs., 15 figs., 3 tabs.

Ultrasonic techniques have recently been applied to the texture characterization in polycrystalline aggregates of hexagonal crystals. The basis of this application lies in the relations between the elastic constants {bar C}{sub ij} of the aggregates, which can be inferred from ultrasonic wave velocity measurements, and the orientation distribution coefficients. This communication present such relations for aggregates which possess orthotopic material symmetry and hexagonal crystal symmetry for Voigt, Reuss, and Hill averaging methods in a unified and concise representation.

A series of tests have been conducted using the 2.2 ft{sup 2} Norton filter to solve the fouling problems observed with the ETF Norton system. The objective of these tests was to determine filter efficiency as a function of backpulse strength and feed velocity. Based on experimental results, it is recommend that the filters should be operated at the following conditions: (1) Backpulse Transmembrane Pressure/FeedTransmembrane Pressure (BP/FP) > 1.5, preferably 2 or 3. (2) Feed crossflow velocity = 6--8 f/s. It is expected that operation at these conditions should improve performance by 30--60%.

Following the installation of modules, cables and other equipment into the DO central cryostat (CC cryostat) the small clearance between the cryostat head and internal equipment caused concern that the head would make contact with the equipment when the cryostat was put under vacuum for leak checking. This finite element analysis was requested by George Mulholland to determine the amount of deflection in the head due to vacuum loads.

This paper is a transcript of testimony by Alvin W. Trivelpiece, director of ORNL, before Congressional Subcommittee on Science, Technology, and Space. Dr. Trivelpiece discusses the importance of training scientist and engineers for the year 2000. (FSD)

The paper describes the design and analysis of Radioisotope Thermoelectric Generators Integrated with JPL's CRAF and Cassini spacecraft. The principal purpose of the CRAF mission is the study of asteroids and comets, and the principal purpose of the Cassini mission is the study of asteroids, Saturn, and its moons (particularly Titan). Both missions will employ the Mariner/Mark-2 spacecraft, and each will be powered by two GPHS-RTGs. JPL's spacecraft designers wish to locate the two RTGs in close proximity to each other, resulting in mutual and unsymmetrical obstruction of their heat rejection paths. To support JPL's design studies, the U.S. Department of Energy asked Fairchild to determine the effect of the RTGs' proximity on their power output. As described in the paper, this required the development of novel analysis methods and computer codes for the coupled thermal and electrical analysis of obstructed RTGs with axial and circumferential temperature, voltage, and current variations. The code was validated against measured data of unobstructed RTG tests, and was used for the detailed analysis of the obstructed CRAF and Cassini RTGs. Also described is a new method for predicting the combined effect of fuel decay and thermoelectric degradation on the output of obstructed RTGs, which …

At the Savannah River Site, liquid, low-level nuclear waste will be disposed of by incorporating the waste in concrete, a wasteform called saltstone. Saltstone monoliths will then be buried in the earth. To study the potential uptake of radionuclides by trees and other plants growing in the soil in the area containing buried saltstone, a lysimeter study has been in progress since 1984. Thirty two lysimeters were designed, constructed, and filled with soil. Saltstone samples, containing the liquid, low-level supernate from the tank 50 in-tank precipitation demonstration, were buried in some of the lysimeters. Other lysimeters, not containing saltstone, were used as controls. Crops, grass, and trees were planted in the lysimeters and sampled periodically to determine radionuclide concentrations. Water samples were also collected from the lysimeter sumps and analyzed for radionuclide content. This report documents the results of vegetative and lysimeter sump water measurements from the beginning of the project in November of 1984 through September of 1989. 6 refs., 22 figs., 6 tabs.

The search by E-735 for QGP evidence in centrally produced particles in {bar p}p collisions has revealed several interesting results in the behavior with variation of dN{sub c}/d{eta} in the measured interval from 2--18. In {l angle}P{sub t}{r angle} we see a decrease in slope for all particles near dN{sub c}/d{eta} {approx equal} 9 corresponding to a Bjorken initial energy density of 2.2 GeV/{sub fm}{sup 3}. Above dN{sub c}/d{eta} = 10, the increase of {l angle}P{sub t}{r angle} is small except for {bar p}'s where the data suggest a 25% increase in the region 13--18. In the particle ratios, normalizing to {pi}'s, they (K, {bar p}, {Lambda}{sup 0}, {gamma}) are all independent of dN{sub c}/d{eta} within errors of {plus minus} 15% except for K{sup {plus minus}}/{pi}{sup {plus minus}} which increases by 30% in the interval 7 to 18. Based on the E-735 data analyzed to data, one can conclude that QGP is not manifest in {bar p}p collisions at 1.8 TeV. Nonetheless, there are the two effects mentioned above, which can be explored with much improved sensitivity using the high-statistics data of the '88--'89 run.

A stack of lead and scintillator was placed in a neutral beam obtained from targeting 800 GeV protons. Small pieces of film containing radiochromic dye were placed adjacent to the layers of scintillator for the purpose of measuring the radiation dose to the scintillator. Our motivation was to calibrate the radiation dose obtainable in this manner for future tests of scintillator for SSC experiments and to relate dose to flux to check absolute normalization for calculations. We also observed several other radiation effects which should be considered for both damage and compensation in a calorimeter.

This is the ninth quarterly report. Objective is to extend and optimize UOP`s single-stage slurry-catalyzed co-processing scheme. Emphasis is given to defining and improving catalyst utilization and costs, evaluating alternative and disposable slurry-catalyst systems, and improving catalyst recycle and recovery. During this quarter, a temperature survey was completed with the reference V catalyst and liquid recycle. Objective of this study was to determine whether the improved high-severity performance observed for the Mo catalyst with liquid recycle was also possible with the reference V catalyst. In Run 5, a temperature-space velocity study was performed with the V catalyst but without liquid recycle. In that run, plant operability dropped dramatically above 425 C. Recycle was added in Run 21, but the temperature was kept constant at the reference 426 C. This report covers results of bench-scale Run 29, which examined combined effects of liquid recycle and increased temperature.

This report describes the progress in the Georgetown University research, development and demonstration project of a fuel cell/battery powered bus system. The topics addressed in the report include vehicle design and application analysis, technology transfer activities, coordination and monitoring of system design and integration contractor, current problems, work planned, and manpower, cost and schedule reports.