Microseismicity was monitored in the Chaveroo oil field in southeastern New Mexico during, and for 5 weeks following, a pressurized stimulation of a well being prepared as an injector for a water flood operation. Three-thousand barrels of water were injected into the reservoir over a 5.5-hour period. Little seismicity was detected during the stimulation. Intermittent monitoring over a 5-week period following the injection indicated detectable seismicity occurring with activity levels varying in time. The most active period recorded occurred just after production resumed in the immediate area of the monitor well. Mapping the microearthquakes using the hodogram technique indicates the events occur along linear trends which corroborate known structural trends of the field. Seismicity trends were defined both parallel and perpendicular to the regionally defined maximum horizontal stress direction. Seventy-three good quality events were recorded, in a cumulative 24 hour period, from which structures were mapped up to 3000 ft from the monitor well. 13 refs., 9 figs.

Slagging combustors with injected lime or limestone are being considered as replacements for conventional coal burners. They have advantages in that they can be stages to reduce NO{sub x} and SO{sub x} emissions. Iron oxide, as an alternative to lime or-limestone may be effective not only as a desulfurizing agent, but, under the right conditions of oxygen potential, it can act as a flux to produce a glassy slag This glassy slag should be dense and environmentally inert. In this reporting period, the thermodynamic conditions for the operation of the first stage of a combustor operating on a Illinois No. 2 Coal have been examined with respect to the formation of the four phase equilibrium:FeO(wustite)/Fe/liquid/gas over the temperature 950{degree} to 1300{degree}C. The minimum dosages of iron oxide which are required at equilibrium and the calculated maximum percent sulfur removal are reported. Also given are the expected pounds of S per million Btu of heat SO{sub 2} evolution calculated for complete combustion. These preliminary results indicate that higher temperatures, in the range studied, give better results approaching 96 percent sulfur removal from a coal containing (on a dry basis) 3.29% by weight sulfur. A comparison is made between iron oxide and …

The objective of this project is to demonstrate on a commercial scale several innovative applications of cost-reducing technology to the Chiyoda Thoroughbred-121 (CT-121) process. CT-121 is a second generation flue gas desulfurization (FGD) process which is considered by the Electric Power Research Institute (EPRI) and Southern Company Services (SCS) to be one of the most reliable and lowest cost FGD options for high-sulfur coal-fired utility boiler applications. Demonstrations of the innovative design approaches will further reduce the cost and provide a clear advantage to CT121 relative to competing technology.

This invention consists of an electrical safety device for use in power tools that is designed to automatically discontinue operation of the power tool upon physical contact of the tool with a concealed conductive material. A step down transformer is used to supply the operating power for a disconnect relay and reset delay. When physical contact is made between the power tool and the conductive material, an electrical circuit through the disconnect relay is completed and the operation of the power tool is automatically interrupted. Once the contact between the tool and conductive material is broken, the power tool can be quickly and easily reactivated by a reset push button activating the reset relay. A remote reset is provided for convenience and efficiency of operation.

To forecast the ecological impact of global change, research initiatives are needed on the explicit role of humans in ecological systems, and on how ecological processes functioning at different spatial and temporal scales are coupled. Furthermore, to synthesize the results of ecological research for Congress, policymakers, and the general public, a new agency, called the United States Ecological Survey (USES) is urgently required. Also, a national commitment to environmental health, as exemplified by establishing a National Institutes of the Environment (NIE), should be a goal.

An improvement over prior compositions wherein the ductility of Ni-Si alloys are improved with minor alloying additions of hafnium or zirconium.

Slagging combustors with injected lime or limestone are being considered as replacements for conventional coal burners. They have advantages in that they can be staged to reduce NO{sub x} and SO{sub X} emissions. Iron oxide, as an alternative to lime or limestone may be effective not only as a desulfurizing agent, but, under the right conditions of oxygen potential, it can act as a flux to produce a glassy slag. This glassy slag should be dense and environmentally inert. In this reporting period, the thermodynamic conditions for the operation of the first stage of a combustor operating on a Illinois No. 2 Coal have been examined with respect to the formation of the four phase equilibrium: FeO(wustite)/Fe/liquid/gas over the temperature 950{degrees} to 1300{degrees}C. The minimum dosages of iron oxide which are required at equilibrium and the calculated maximum percent sulfur removal are reported. Also given are the expected pounds of So, per million Btu of heat evolution calculated for complete combustion. These preliminary results indicate that higher temperatures, in the range studied, give better results approaching 96 percent sulfur removal from a coal containing (on a dry basis) 3.29% by weight sulfur. A comparison is made between iron oxide and …

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

A report is given on progress made during the second year of a three year contract studying the feasibility of nuclear pumping the atomic iodine laser. Experimental results are presented showing efficiencies of 25--38% at converting neutron-induced nuclear reaction energy in the excimer XeBr into UV photons which can be used to pump the laser. Parametric studies were done utilizing the {sup 10}B(n,{alpha}){sup 7}Li reaction, with three bromine donor chemicals, over a range of pressures and mix ratios, to optimize the fluorescence efficiency.

The effective design and operation of processes for conversion of coal to fluid fuels requires accurate knowledge of the phase behavior of the fluid mixtures encountered in the conversion process. Multiple phases are present in essentially all stages of feed preparation, conversion reactions and product separation; thus, knowledge of the behavior of these multiple phases is important in each step. The overall objective of the author`s work is to develop accurate predictive methods for representation of vapor-liquid equilibria in systems encountered in coal conversion processes. 59 refs., 6 figs., 7 tabs.

The traveler participated in an International Symposium on Trends in Biological Dosimetry and presented an invited paper entitled, Adducts in sperm protamine and DNA vs mutation frequency.'' The purpose of the Symposium was to examine the applicability of new methods to study quantitatively the effects of xenobiotic agents (radiation and chemicals) on molecular, cellular and organ systems, with special emphasis on human biological dosimetry. The general areas covered at the meeting included studies on parent compounds and metabolites; protein adducts; DNA adducts; gene mutations; cytogenetic end-points and reproductive methods.

Research continued on coal combustion. The project objectives are (1) to measure the effect of devolatilization temperature and time on the properties of the char and (2) characterize and quantify the effect of thermal annealing on char reactivity during char burnout under conditions of pulverized combustion. Work done during this reporting period includes: coal devolatilization/char generation; char oxidation in the thermogravimetric analyzer (TGA). Oxidation was conducted at 500{degree}C in a 5% O{sub 2}-N{sub 2} mixture at 150 cm{sup 3}/min flowrate. Under these conditions external and intraparticle diffusional limitations were negligible. Three chars obtained from the Pittsburgh No. 8 coal were used in the experiments; oxidation of single char particles in the electrodynamic balance. Experiments were carried out with particles from the Pittsburgh No. 8 char and a spherocarb'' synthetic char obtained from a vendor. The spherocarb char was used because the particles are nearly spherical thus avoiding the complications of irregular particle shape. 15 figs., 1 tab.

To forecast the ecological impact of global change, research initiatives are needed on the explicit role of humans in ecological systems, and on how ecological processes functioning at different spatial and temporal scales are coupled. Furthermore, to synthesize the results of ecological research for Congress, policymakers, and the general public, a new agency, called the United States Ecological Survey (USES) is urgently required. Also, a national commitment to environmental health, as exemplified by establishing a National Institutes of the Environment (NIE), should be a goal.

We have recently been trying to accumulate all of the information necessary to decide on the layout of the regular curved arcs of the Low Energy Ring (LER) and there have been several ABC Notes published on different aspects of the problem. This note will describe the layout that has been derived from these considerations.

With a new generation of high performance computers appearing around us on a time scale of months, a new challenge for developers of simulation codes is to write and maintain production codes that are both highly portable and maximally efficient. My contention is that C is the language that is both best suited to that goal and is widely available today. GLF is a new code written mainly in C which is intended to have all of the XRASER physics and run on any platform of interest. It demonstrates the power of the C paradigm for code developers and flexibility and ease of use for the users. Three fundamental problems are discussed: the C/UNIX development environment; the supporting tools and libraries which handle data and graphics portability issues; and the advantages of C in numerical simulation code development.

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and state and local governments on the following topics: distillate fuel oil net production, imports and stocks for all PADD's and product supplied on a US level; propane net production, imports and stocks for Petroleum Administration for Defense Districts (PADD) I, II, and III; natural gas supply and disposition and underground storage for the United States and consumption for all PADD's; residential and wholesale pricing data for propane and heating oil for those states participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the United States and selected cites; and US total heating degree-days by city. This report will be published weekly by the EIA starting the first week in October 1990 and will continue until the first week in April 1991. 27 figs., 12 tabs.

In the first part of this talk I have reviewed the history of the OZI rule. I then have shown how it is a unique selector glueballs and new quarks in hadron spectroscopy. In particular the only glueball candidates which cannot be explained by other hypotheses within QCD are the I{sup G}J{sup PC} = 0{sup +}2{sup ++} g{sub T}(2010), g{sub T},(2300) and g{sub T{double prime}}(2340) observed in the OZI suppressed reaction {pi}{sup {minus}} p {yields} {phi}{phi}n. The narrowness of the J/{psi} and T can only be explained by OZI suppression. I then reminisced about the 1954 Rochester Conference in which our work on {pi}{sup {plus minus}}p total cross sections and {pi}{sup {plus minus}} production combined gave convincing evidence for the delta being the first resonance. Described how the 1964 Dubna Conference results on small angle {pi}{sup {plus minus}}p elastic scattering led to the first critical experimental check of the pion-nucleon forward dispersion relations which showed that the basic axions of modern field theory worked on strong interactions at high energies. I finally reminisced about glueballs in the 1982 and 1988 Rochester Conferences. 52 refs., 17 figs., 3 tabs.

A self-consistent design strategy for induction linacs is presented which addresses the issues of brightness preservation against space charge induced emittance growth, minimization of the beam breakup instability and the suppression of beam centroid motion due to chromatic effects (corkscrew) and misaligned focusing elements. A simple steering algorithm is described that widens the effective energy bandwidth of the transport system.

Superplastic forming of Ti-6Al-4V was investigated with three heats of material to examine the effects of extrinsic and intrinsic variables on strain rate sensitivity and flow stress. Tension tests with strain rate jumps and step strain rate tests were used to determine the effects of strain rate, strain, and temperature on strain rate sensitivity of Ti-6Al-4V. Superplastic forming of Ti-6Al-4V is strongly influenced by deformation temperature. The uniform elongation and the strain rate sensitivity were maximized at 900{degree}C in the temperature range tested. In the strain rate range tested, strain rate sensitivity increased slightly as the strain rate decreased. In examining the results, it was apparent that at high strains, grain growth decreased strain rate sensitivity. This decrease was a strong function of temperature, which minimized at 875{degree}C. The strong dependence of superplastic behavior on temperature can be related to relative amounts of alpha and beta in the microstructure, as shown in the model for superplastic deformation of Ti-6Al-4V.

This paper specifies the usage of structural bolts in terms of their design, selection and application, in accordance with the American Institute of Steel Construction (AISC) Ninth Edition. Manual of Steel Construction.''

We compare angular distributions calculated by folding nucleon- nucleon scattering kernels, using the theory of Feshbach, Kerman and Koonin, and the systematics of Kalbach, with a wide range of data. The data range from (n,xn) at 14 MeV incident energy to (p,xn) at 160 MeV incident energy. The FKK theory works well with one adjustable parameter, the depth of the nucleon-nucleon interaction potential. The systematics work well when normalized to the hybrid model single differential cross section prediction. The nucleon- nucleon scattering approach seems inadequate. 9 refs., 10 figs.

Fe substitution for Cu in YBa{sub 2}Cu{sub 3}O{sub y} can give information about the local environment on the two crystallographic Cu sites through Mossbauer effect measurements. In this paper, we explore the possibility of forcing larger amounts of Fe onto the Cu (2) site which represents the CuO planes. At values near y = 6, the chain Cu (1) site is characteristic for Cu{sup +} in its linear 0 coordination and should preclude Fe occupation. We therefore prepared materials at elevated temperatures under N{sub 2} where y {approximately}6. Oxygenation to y {approximately}7 was achieved at temperatures where metal diffusion is minimized. We used Mossbauer spectroscopy to determine the Fe site occupancy. Site preference can be expressed in terms of a distribution ratio r = MCul/ MCu2. Creating materials with low r allows studying the effects of spatially constrained Fe on T{sub c}, separating influences from the spatially more complex Cu (1) site.

The drought of 1988 caused the operations group to become concerned about the rate of evaporation from the Main Ring cooling ponds. They needed a way to data-log windspeed and direction. They had an old broken Heathkit weather station. The anemometer and windvane were salvaged and repaired. An interface to two MADC channels on the PBAR CAMAC link was built on an old piece of CAMAC card with salvaged parts. The project cost nothing. It has been in service since January 1989.

Development of the All Particle Method, a project to simulate the transport of particles via the Monte Carlo method, has proceeded on two fronts: data collection and algorithm development. In this paper we report on the status of the data libraries. The data collection is nearly complete with the addition of electron, photon, and atomic data libraries to the existing neutron, gamma ray, and charged particle libraries. The contents of these libraries are summarized.