Optical emission spectra from high-purity Pu-242 were generated with a glovebox-enclosed inductively coupled plasma (ICP) source. Spectra covering the 2280 to 7008 Angstrom wavelength range are presented along with general commentary on ICP-Pu spectroscopy.

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, information gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.

Regular changes in solution composition were observed experimentally during granite reaction with dilute NaCl (+CaCl/sub 2/) solutions; these changes closely follow the empirical Na-K-Ca geothermometer relationship. Initial minerals forming the granite (quartz, plagioclase, K-feldspar, and biotite) were etched by the reactions. Alteration phases formed include calcium-zeolite at <300/sup 0/C, feldspar overgrowths at >300/sup 0/C, and minor amounts of clay and calcsilicate at all temperatures. Amphibole overgrowths were also found at 340/sup 0/C. Quartz is near saturation in all experiments, and preliminary calculations of aqueous species distributions and mineral affinities indicate that the solutions achieve super-saturation with feldspars as the temperature increase. A consistent variation attributable to pH differences was observed in the empirical geothermometer relationship for all experimental data. At 340/sup 0/C, the experimental solutions appear to have deviated slightly from the empirical Na-K-Ca relationship. Such deviations may also be found in natural systems that attain such temperatures.

Although there are many publications pertaining to gas hydrates, their formation and stability in various geological conditions are poorly known. Therefore, for the same reasons and because of the very broad scope of our research, limited amount and extremely dispersed information, the study regions are very large. Moreover, almost without exception the geological environments controlling gas hydrates formation and stability of the studied regions are very complex. The regions studied (completed and partially completed - total 17 locations) during the reporting period, particularly the Gulf of Mexico and the Middle America Trench, are the most important in this entire research project. In the past, both of these regions have been extensively studied, the presence of gas hydrates confirmed and samples recovered. In our investigation it was necessary not only to review all previous data and interpretations, but to do a thorough analysis of the basins, and a critical evaluation of an previously reported and publicly available but not published information.

A diver reconnaissance of the intertidal and subtidal zones of Back Island, Southeast Alaska, was performed May 20-22, 1986. The specific objectives were to catalog potentially vulnerable shellfish, other invertebrates, and plant resources, and to identify potential herring spawning sites. This effort was designed to supplement the existing ecological data base for Back Island that would be used during the National Environmental Policy Act (NEPA) documentation process. A NEPA document will be prepared that describes the site environment and assesses impacts from the proposed construction and operation of the Southeast Alaska Acoustic Measurement Facility (SEAFAC). Nine diver transects were established around Back Island. Particular attention was devoted to proposed locations for the pier and float facilities and range-operations and shore-power cable run-ups.

The purpose of this report is to update and reorganize our recent review on homogeneous catalysis of the water-gas shift reaction (WGSR) based on recent literature publications and patents. This updated version will serve as a means of selecting 10 candidate catalyst systems for use in developing effective, sulfur-tolerant, low temperature WGSR catalysts. This report discusses the variations possible in the basic chemistry associated with WGSR catalytic cycles, including basic, acidic, and neutral conditions. Then individual mechanism for specific WGSR catalyst systems are discussed. Finally, on the basis of the literature reports, a list is presented of candidate catalysts and basic systems we have chosen for study in Task 3.

The objective of the proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

Concentration ratios (CR's) used for modeling the uptake and food chain transport of radionuclides in fish have usually been conservative; that is, at the high end of reported values. This practice ensures that the dose to the consumer of contaminated fish will not be underestimated. In many models, however, conservative values have been used for all variables that have any uncertainty associated with them. As a result the dose to the consumer is overestimated. Realistic CR values need to be developed to establish model parameters that will accurately reflect tissue burdens in fish and resulting dose rates to consumers. This report reviews and summarizes published literature on the uptake and distribution of stable and radioactive isotopes of 26 elements. Based on this review, we have made recommendations on CR values to be used for modeling the accumulation of radionuclides in fish. Our recommendations are compared with CR values reported in other publications. A generic discussion of abiotic and biotic factors that influence CR values is provided so that CR values may be adjusted based on site-specific characteristics of the fishes habitat. Recommended CR values for freshwater fish and for marine fish are listed. Although this report emphasizes radionuclides, it is …

Laser photodetachment of the excess electron to neutralize relativistic ions offers many advantages over the more conventional collisional methods using gases or thin foils as the neutralization agents. Probably the two most important advantages of laser photodetachment are the generation of a compact and low divergence beam, and the production of intense neutral beams at very high efficiency (approximately 90%). The high intensities or high current densities of the neutral beam result from the fixed maximum divergence that can be added to the beam by photodetachment of the charge using laser intensity of fixed wavelength and incident angle. The high neutralization efficiency is possible because there is no theoretical maximum to the neutralization efficiency, although higher efficiencies require higher laser powers and, therefore, costs. Additional advantages include focusability of the laser light onto the ion beam to maximize its efficacy. There certainly is no residual gas left in the particle beam path as is typical with gas neutralizers. The photodetachment process leaves the neutral atoms in the ground state so there is no excited state fluorescence to interfere with the subsequent beam sensing. Finally, since the beams to be neutralized are very high powered, for a large range of neutralization …

The pattern known as churn flow is a highly unsteady pattern with stochastic features and is extremely complex. However, calculations show that for many geothermal wells the condition of churn flow consists over much of the length of the two phase zone. Furthermore, it frequently exists at the surface so that design of separation equipment and surface piping depends on the accurate modelling of this type of flow. It has been the long term purpose of this project to develop physically based models for churn flow which can be used as a basis for predicting holdup, frictional loss and heat transfer rates for this flow pattern in geothermal systems. To achieve this end, it was necessary to develop new methods for measuring the time dependent characteristics of the flow and thus be able to uncover the basic physics of the flow. Models can then be developed based on this understanding which characterizes the flow and equations for holdup, friction and heat transfer evolved.

This report presents work for the feasibility study of central processing of contact-handled TRU waste. Discussion of scenarios, transportation options, summary of cost estimates, and institutional issues are a few of the subjects discussed. (JDL)

ATM-11 glass is designed to be representative of defense high-level waste glasses that will be produced by the Defense Waste Processing Facility at the Savannah River Plant in Aiken, South Carolina. It is representative of a 300-year-old nuclear waste glass and was intended as a conservative compromise between 10-year-old waste and 1000-year-old waste. The feedstock material for this glass was supplied by Savannah River Laboratory, Aiken, SC, as SRL-165 black frit to which was added Ba, Cs, Mo, Nd, Ni, Pd, Rb, Ru, Sr, Te, Y, and Zr, as well as /sup 241/Am, /sup 237/Np, /sup 239+240/Pu, /sup 151/Sm, /sup 99/Tc, and depleted U. The glass was melted under the reducing conditions that resulted from the addition of 0.7 wt% graphite during the final melting process. Nearly 3 kg of ATM-11 glass were produced from a feedstock melted in a nitrogen-atmosphere glove box at 1250/sup 0/C in Denver Fire Clay crucibles. After final melting, the glass was formed into stress-annealed rectangular bars 1.9 x 1.9 x 10 cm nominal size. Twenty-six bars were cast with a nominal weight of about 100 g each. The analyzed composition of ATM-11 glass is tabulated. Examination of a single transverse section from one bar …

There are two categories of waste considered in this report. The first is the spent fuel disassembly (SFD) hardware. This consists of the hardware remaining after the fuel pins have been removed from the fuel assembly. This includes end fittings, spacer grids, water rods (BWR) or guide tubes (PWR) as appropriate, and assorted springs, fasteners, etc. The second category is other non-fuel-bearing (NFB) components the DOE has agreed to accept for disposal, such as control rods, fuel channels, etc., under Appendix E of the standard utiltiy contract (10 CFR 961). It is estimated that there will be approximately 150 kg of SFD and NFB waste per average metric ton of uranium (MTU) of spent uranium. PWR fuel accounts for approximately two-thirds of the average spent-fuel mass but only 50 kg of the SFD and NFB waste, with most of that being spent fuel disassembly hardware. BWR fuel accounts for one-third of the average spent-fuel mass and the remaining 100 kg of the waste. The relatively large contribution of waste hardware in BWR fuel, will be non-fuel-bearing components, primarily consisting of the fuel channels. Chapters are devoted to a description of spent fuel disassembly hardware and non-fuel assembly components, characterization of …

The objective of this study is to determine the optimum electrolyte composition for molten carbonate fuel cells. To accomplish this, the contractor will provide: (1) Comprehensive reports of on-going efforts to optimize carbonate composition. (2) A list of characteristics affected by electrolyte composition variations (e.g. ionic conductivity, vapor pressure, melting range, gas solubility, exchange current densities on NiO, corrosion and cathode dissolution effects). (3) Assessment of the overall effects that these characteristics have on state-of-the-art cell voltage and lifetime.

This study was performed to help identify a preferred TRU waste treatment alternative for reprocessing wastes with respect to waste form performance in a geologic repository, near-term waste management system risks, and minimum waste management system costs. The results were intended for use in developing TRU waste acceptance requirements that may be needed to meet regulatory requirements for disposal of TRU wastes in a geologic repository. The waste management system components included in this analysis are waste treatment and packaging, transportation, and disposal. The major features of the TRU waste treatment alternatives examined here include: (1) packaging (as-produced) without treatment (PWOT); (2) compaction of hulls and other compactable wastes; (3) incineration of combustibles with cementation of the ash plus compaction of hulls and filters; (4) melting of hulls and failed equipment plus incineration of combustibles with vitrification of the ash along with the HLW; (5a) decontamination of hulls and failed equipment to produce LLW plus incineration and incorporation of ash and other inert wastes into HLW glass; and (5b) variation of this fifth treatment alternative in which the incineration ash is incorporated into a separate TRU waste glass. The six alternative processing system concepts provide progressively increasing levels of TRU …

The objectives of this study are to identify data sources that provide information on current and future levels of commercial buildings retrofit activity in the US, and to evaluate the coverage these data sources provide the commercial retrofit industry. Data sources evaluated include reports, magazines, computerized data bases, and surveys. Relevant data sources were identified through a literature review and by telephone and mail contacts with building industry experts and trade associations. A brief summary of each of the data sources is provided and recommendations are made for gathering additional data to supplement the existing data source.

Activities are reported in these areas: Bevatron operations (including a list of major experimental runs), user support at the Bevalac, modifications to the local injector, accelerator improvements at the Super HILAC, and general Bevalac upgrading. Modifications are reported for six individual beam lines. (LEW)

For the purpose of providing recommended design assumptions for TRUPACT-2, gas generation within the TRU waste containers and the potential effects resulting from the absence of continuous venting of the TRUPACT-2 are considered in this report. The recommended assumptions are based on the best current state of knowledge to conservatively represent the potential gas generation loads for the TRUPACT-2.

The following five chapters in this report have been processed separately for inclusion in the Energy Data Base: (1) theoretical model of convective diffusion of motile and non-motile bacteria toward solid surfaces; (2) interfacial electrochemistry of oxide surfaces in oil-bearing sands and sandstones; (3) effects of sodium pyrophosphate additive on the ''huff and puff''/nutrient flooding MEOR process; (4) interaction of Escherichia coli B, B/4, and bacteriophage T4D with Berea sandstone rock in relation to enhanced oil recovery; and (5) transport of bacteria in porous media and its significance in microbial enhanced oil recovery.

In 1984, the dichromatic train was installed for an initial set of tests. Along with these tests of train performance, measurements of muon rates at various depths in the berm were taken in order to check Monte Carlo predictions. Data were taken at a range of train momentum settings, and from a bare target. The results of those studies are presented here and compared to predictions. In 1985, the quadrupole triplet train was installed for a wide band neutrino run. During this run, 5.5 m of 1.8 m diameter lead was installed at the request of the experimenters to harden the shield. Data obtained during this triplet run under a variety of conditions are also presented, and compared to Monte Carlo predictions. Finally, these results are used to determine how much additional shielding is needed for higher energy operation.

In July 1985, we benchmarked the Convex C-1 computer at the Convex plant in Richardson, Texas. The machine is marketed as a mini-supercomputer executing a UNIX operating system. The architecture includes vector functional units, 16-million 64-bit words of physical memory and 64 kbytes of set-associative cache between main memory and the CPU. The standard one-processor Los Alamos benchmarks were executed and timed in both single-precision (32-bit) and double-precision (64-bit) floating-point mode. Subsequent to the July benchmark, the machine architecture was changed to expand the cache bypass for vector memory accesses. The benchmarks were redone in October 1985 to include the significant architecture modification. The results in this paper are from the latest benchmark.

The Schroedinger Integral Equation is derived for an N-body system, and solutions for required Green's functions are obtained. The initial method of numerical solution has yielded the correct ground states and lower excited states of He (test case) and dt..mu... Steps are being taken to improve the numerical accuracy.

There are various beam line components between the interaction point (IP) of the SLC and the beam dumps which will intercept enough beam to warrant calculating the radiation levels inside the final focus alcoves. The three types of devices which are of concern are the main dump, tune-up dumps, and adjustable collimators. Fluences of and doses from neutrons and photons in the alcoves are calculated. It is concluded that if the beam losses do occur as expected, many of the electronic components in the alcoves will begin to fail after a very short running period. The final focus is seen to be a hostile environment for sensitive electronics, and some combination of local shielding around the beam intercepting devices and shielding of the alcoves themselves is recommended if electronics are to remain in the tunnels. Annual doses in the alcoves are tabulated, followed by types, locations of devices and beam losses. (LEW)

The horizontally scanning, multiangle charge-exchange analyzers on the Princeton Large Torus (PLT) and the Poloidal Divertor Experiment (PDX) were used to study the effects of MHD activity on the background ion distribution function and on the beam ion slowing-down process during high-power neutral injection. Sawtooth oscillations were observed in the fast ion flux on PLT and PDX, and measurements with neutral beams providing local neutral density enhancement indicate that ions are transported radially when these events occur. With near-perpendicular injection in PDX, at the lower toroidal fields necessary to maximize beta, rapid, repetitive bursts of greatly enhanced charge-exchange flux were observed. These are associated with the ''fishbone'' MHD instability, and a substantial depletion of the perpendicular slowing-down spectrum below the injection energy was seen. A simple phenomenological model for this loss mechanism was developed, and its use in simulation codes has been successful in providing good agreement with the data. The behavior and characteristics of this model are well matched by the direct theoretical calculations.