Progress during October through December 1974 in research on chemical explosives is reported. The kinetics of the base hydrolysis of TATB has been studied as a function of hydroxide concentration and temperature. The initial rate of hydrolysis expressed as k(OH/sup -/) was determined by extrapolation to zero time. The values of the hydrolysis constant k determined at three temperatures were 3.24 x 10/sup -6/hr/sup -1/ (50 C), 2.22 x 10/sup -5/ hr/sup -1/ (75 C) and 2.05 x 10/sup -4/ hr/sup -1/ (96 C). An activation energy of 15 +- 2 kcal mole/sup -1/ was calculated from an Arrhenius plot. A method for analysis of the residue chloride in TATB is being developed utilizing base hydrolysis as a means of digesting the TATB and releasing the entrapped chloride. The chloride in the hydrolyzed solution is determined by potentiometric titration with standard silver nitrate using a specific ion electrode. The hydrolysis of 1,3,5-trichloro-2,4,6-trinitrobenzene (TCTNB) containing a small amount of 1,3-dinitro-2,4,6-trichlorobenzene (DNTCB) and 1,3-dinitro-2,4,5,6-tetrachlorobenzene (DNT/sub 4/CB) has also been studied to determine the amount of chloride released. (auth)

This document covers: N-type material development (gadolinium selenide; synthesis, analysis, processing, element contacting, compatibility, life testing), TPM-217 P-type characterization (element contacting, compatibility, life and performance testing, partition), and couple development (TPM-217/N-rare earth chalcogenide, TPM-217/3N-PbTe). (DLC)

The experimental results of a deuterium bubble chamber photoproduction study of half a million pictures at 5.5 GeV are presented. This experiment has been performed using a monoenergetic and linearly polarized photon beam facility at SLAC. At 5.5 GeV the beam polarization is greater than 90%, and the average FWHM of the beam energy spectrum is 0.6 GeV. The reaction ..gamma..d ..-->.. ..pi../sup +/..pi../sup -/d has been studied in detail. A clear sample of ..gamma..d ..-->.. rho/sup 0/d channel was obtained and from the rho/sup 0/ decay distribution in terms of an extended density matrix which includes correlation with the beam polarization, nine independent density matrix parameters were determined. The study of rho/sup 0/ production and decay in the reaction channel ..gamma..d ..-->.. rho/sup 0/d was found to proceed almost completely through natural parity exchanges; the contribution from unnatural parity exchanges being only (5.3 +- 4.5)% for momentum transfer absolute value t less than or equal to 0.25 GeV/sup 2/. For the rho/sup 0/ mass and width, the values (766 +- 5) and (139 +- 11) MeV, respectively were obtained. The rho/sup 0/ production cross section in this channel has been determined to be (9.1 +- 0.8) ..mu..b.

It is known that small scale beam instabilities limit the focusable energy that can be achieved from a terawatt laser chain. Spatial filters are currently being used on CYCLOPS to ameliorate this problem. Realizing the full advantage of such a filter, however, may require certain staging modifications. A staging methodology is discussed that should be applicable to the CYCLOPS, 381, and SHIVA systems. Experiments are in progress on CYCLOPS that will address directly the utility of the proposed approach.

Separate abstracts were prepared for the nine appendices included. (WHK)

Tests were performed to determine the structural response of commercially available expansion type anchors for the FFTF when subjected to dynamic loadings similar to machine vibrations and earthquakes. The specimens were subjected to tension, shear, and combined shear-tension loads.

None

None

None

None

The organization and management of a program for designing, ground testing and flight qualification of a radioisotope-fueled Brayton cycle power system for space vehicles are summarized. The conceptual design, and predicted performance and cost of the Brayton power system and the ground demonstration are outlined. The personnel and facilities which will be used in the program are described. (LCL)

The technical program plan for evaluating the performance and safety of a radioisotope-fueled Brayton power system for space vehicles is presented with schedules for evaluating heat source design and safety, for specifying power system requirements, and for the development and operation of a ground demonstration system. (LCL)

A proposal for the demonstration, development and production of the Isotope Brayton Flight System for space vehicles is presented with details on the technical requirements for designing and testing a ground demonstration system and on the program organization and personnel. (LCL)

A program is proposed for the ground demonstration, development, and flight qualification of a radioisotope nuclear heated dynamic power system for use on space missions beginning in the 1980's. This type of electrical power system is based upon and combines two aerospace technologies currently under intense development; namely, the MHW isotope heat source and the closed Brayton cycle gas turbine. This power system represents the next generation of reliable, efficient economic electrical power equipment for space, and will be capable of providing 0.5 to 2.0 kW of electric power to a wide variety of spacecraft for earth orbital and interplanetary missions. The immediate design will be based upon the requirements for the Air Force SURVSATCOM mission. The proposal is presented in three volumes plus an Executive Summary. This volume describes the tasks in the technical program.

Three potential geothermal sites in Alaska are discovered. The history of previous use of the hot springs, the socio-economic factors, energy needs, and total energy utilization plans of selected Alaskan thermal springs are presented. Proposed research programs for the sites and environmental hazards and protection are described. (MHR)

The study comprises Phase 0 of a project for Experimental Geothermal Research Facilities. The study focuses on identification of a representative liquid-dominated geothermal reservoir of moderate temperature and salinity, preliminary engineering design of an appropriate energy conversion system, identification of critical technology, and planning for implementation of experimental facilities. The objectives included development of liaison with the industrial sector, to ensure responsiveness to their views in facility requirements and planning, and incorporation of environmental and socioeconomic factors. This Phase 0 report covers problem definition and systems requirements. Facilities will incorporate capability for research in component, system, and materials technology and a nominal 10 MWe experimental, binary cycle, power generating plant.

Test articles of 1-in. and 28-in. diameter have been assembled, tested in accordance with HWS-2160 and the FAT Plan, Revision 1, and disassembled and evaluated in the presence of a Bechtel representative. Observations and conclusions are presented.

Phase 0 of a project for Experimental Geothermal Research Facilities focuses on identification of a representative liquid-dominated geothermal reservoir of moderate temperature and salinity, preliminary engineering design of an appropriate energy conversion system, identification of critical technology, and planning for implementation of experimental facilities. The objectives included development of liaison with the industrial sector, to ensure responsiveness to their views in facility requirements and planning, and incorporation of environmental and socioeconomic factors. The overall project, of which the six-month Phase 0 is reported herein, is phased in accordance with RANN guidelines. This Phase 0 report covers problem definition and systems requirements. Phase 1 will involve design of the experimental facility, and testing of components. Phase 2 will comprise detailed design and construction of an experimental geothermal electrical powerplant at East Mesa, Imperial County, California. Facilities will incorporate capability for research in component, system, and materials technology and a nominal 10 MWe experimental, binary cycle, power generating plant.

This study focuses on identification of a representative liquid-dominated geothermal reservoir of moderate temperature and salinity, preliminary design of an appropriate energy conversion system, identification of critical technology and planning for the implementation of experimental facilities. Results of Phase O of the project are reported in two volumes. Volume II presents detailed results of studies and analyses arranged in nine appendices including the final report by a subcontractor on the study. The specific appendices are: Appendix A: Geothermal Resources of the Western United States; Appendix B: Site Selection Process and the East Mesa Geothermal Field; Appendix C: East Mesa Geothermal Field Reservoir Characteristics; Appendix D: Advisor's Views and Comments; Appendix E: Thermodynamic Analyses; Appendix F: Material and Corrosion Factors; Appendix G: Preliminary Reliability/Maintainability Analyses; Appendix H: Environmental Impact Analysis Guidelines; and Appendix I: Report to the National Science Foundation/TRW Systems Group by Rogers Engineering Company, Inc., San Francisco, California.

None

None

None

None

None