This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping and Instrumentation Control (PIC) skid designed as ''N''. The ATP will be performed after the construction of the PIC skid in the shop.

The PFP operating organization requests that the limit set permitting 150 grams fissile be extended to the Hoods 4 and 5 of Room 187. The request for the limit change is explained in the attached request for analysis.

As part of a study of the effect of particle size on reactivity of hematite to aqueous metal ions, the sorption of Zn(II) on hematite nanoparticles and microparticles was examined over a wide range of Zn(II) concentrations using Zn K-edge EXAFS. When reacted with nanoparticles at pH 5.5 and low Zn(II) sorption densities (0.04 {le} {Lambda} < 2.76 imol/m{sup 2}), Zn(II) formed five-coordinated or a mixture of four- and six-coordinated surface complexes with an average Zn-O distance of 2.04({+-}0.02){angstrom}. At pH 5.5 and high Zn(II) sorption densities (2.76 {ge} {Lambda} {le} 3.70 mol/m{sup 2}), formation of surface precipitates is suggested based on the presence of second-shell Zn and multiple scattering features in the Fourier transform (FT) of the EXAFS spectra. EXAFS fitting of these high {Lambda} samples yielded an average first-shell Zn-O distance of 2.10({+-}0.02){angstrom}, with second-shell Zn-Fe and Zn-Zn distances of 3.23({+-}0.03){angstrom} and 3.31({+-}0.03){angstrom}, respectively. Qualitative comparison between the EXAFS spectra of these sorption samples and that of amorphous zinc hydroxide and Zn-bearing hydrotalcite indicates the development of surface precipitates with increasing {Lambda}. EXAFS spectra of Zn(II) sorbed on hematite microparticles under similar experimental conditions showed no evidence for surface precipitates even at the highest Zn surface coverage ({Lambda} …

Gold is a highly valuable metal that can concentrate in iron-rich exogenetic horizons such as laterites. An improved knowledge of the retention mechanisms of gold onto highly reactive soil components such as iron oxyhydroxides is therefore needed to better understand and predict the geochemical behavior of this element. In this study, we use EXAFS information and titration experiments to provide a realistic thermochemical description of the sorption of trivalent gold onto iron oxy-hydroxides. Analysis of Au L{sub III}-edge XAFS spectra shows that aqueous Au(III) adsorbs from chloride solutions onto goethite surfaces as inner-sphere square-planar complexes (Au(III)(OH,Cl){sub 4}), with dominantly OH ligands at pH > 6 and mixed OH/Cl ligands at lower pH values. In combination with these spectroscopic results, Reverse Monte Carlo simulations were used to constraint the possible sorption sites on the surface of goethite. Based on this structural information, we calculated sorption isotherms of Au(III) on Fe oxy-hydroxides surfaces, using the CD-MUSIC (Charge Distribution--Multi Site Complexation) model. The various Au(III)-sorbed species were identified as a function of pH, and the results of these EXAFS+CD-MUSIC models are compared with titration experiments. The overall good agreement between the predicted and measured structural models shows the potential of this combined approach …

The core purpose of this Phase I STTR was to evaluate the feasibility of a new method of producing a recombinant version of manganese peroxidase (MnP) enzyme. MnP is a potentially valuable enzyme for producing high value lignin products and also for industrial de-coloring operations such as biobleaching of pulp and color removal from textile dye effluents. This lignin-modifying enzyme is produced in small amounts by the native host, a white rot fungus. Previous work by Oregon State University developed a secreted recombinant version of the enzyme in the yeast Pichia pastoris. Unfortunately, the expression is barely moderate and the enzyme is heavily glycosylated, which inhibits purification. In this work, the gene for the enzyme is given a tag which targets production of the enzyme to the peroxisome. This is a promising approach since this location is also where heme and hydrogen peroxide are sequestered, which are both necessary cofactors for MnP. More than ten recombinant strains were constructed, verified, and expressed in the Pichia system. Constitutive (GAP) and methanol-induced promoters (AOX) were tried for peroxisomal targeted, cytosolic, and secreted versions of MnP. Only the secreted strains showed activity. The amount of expression was not significantly changed. The degree of …

Faster, more powerful and dense computing hardware generates significant heat and imposes considerable data center cooling requirements. Traditional computer room air conditioning (CRAC) cooling methods are proving increasingly cost-ineffective and inefficient. Studies show that using the volume of room air as a heat exchange medium is wasteful and allows for substantial mixing of hot and cold air. Further, it limits cabinet/frame/rack density because it cannot effectively cool high heat density equipment that is spaced closely together. A more cost-effective, efficient solution for maximizing heat transfer and enabling higher heat density equipment frames can be accomplished by utilizing properly positioned “phase change” or “two-phase” pumped refrigerant cooling methods. Pumping low pressure, oil-free phase changing refrigerant through microchannel heat exchangers can provide up to 90% less energy consumption for the primary cooling loop within the room. The primary benefits of such a solution include reduced energy requirements, optimized utilization of data center space, and lower OPEX and CAPEX. Alcatel-Lucent recently developed a modular cooling technology based on a pumped two-phase refrigerant that removes heat directly at the shelf level of equipment racks. The key elements that comprise the modular cooling technology consist of the following. A pump delivers liquid refrigerant to finned …

None

Monte Carlo methods for radiation transport typically attempt to solve an integral by directly sampling analog or weighted particles, which are treated as physical entities. Improvements to the methods involve better sampling, probability games or physical intuition about the problem. We show that significant improvements can be achieved by recasting the equations with an analytical transform to solve for new, non-physical entities or fields. This paper looks at one such transform, the difference formulation for thermal photon transport, showing a significant advantage for Monte Carlo solution of the equations for time dependent transport. Other related areas are discussed that may also realize significant benefits from similar analytical transformations.

Lawrence Livermore National Laboratory (LLNL) as part of its Department of Energy (DOE), Energy Efficiency and Renewable Energy (EERE), and Vehicle Technologies Program (VTP) effort has investigated class 8 tractor-trailer aerodynamics for many years. This effort has identified many drag producing flow structures around the heavy vehicles and also has designed and tested many new active and passive drag reduction techniques and concepts for significant on the road fuel economy improvements. As part of this effort a database of experimental, computational, and conceptual design for aerodynamic drag reduction devices has been established. The objective of this report is to provide design guidance for trailer base devices to improve their aerodynamic performance. These devices are commonly referred to as boattails, base flaps, tail devices, and etc. The information provided here is based on past research and our most recent full-scale experimental investigations in collaboration with Navistar Inc. Additional supporting data from LLNL/Navistar wind tunnel, track test, and on the road test will be published soon. The trailer base devices can be identified by 4 flat panels that are attached to the rear edges of the trailer base to form a closed cavity. These devices have been engineered in many different forms …

The selection of the design criteria for evaluation of the structural integrity of the MSG as modified for Na-H/sub 2/O reation testing is presented.

This report was prepared as an account of work sponsored by an agency of the United Staes Government. Neither the Regents of the University of California, the United States Government nor any agency thereof, nor any of their employees make any warranty, express or implied, or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use would not infringe privately owned rights.

In this paper complex adaptive systems are defined by a self- referential loop in which objects encode functions that act back on these objects. A model for this loop is presented. It uses a simple recursive formal language, derived from the lambda-calculus, to provide a semantics that maps character strings into functions that manipulate symbols on strings. The interaction between two functions, or algorithms, is defined naturally within the language through function composition, and results in the production of a new function. An iterated map acting on sets of functions and a corresponding graph representation are defined. Their properties are useful to discuss the behavior of a fixed size ensemble of randomly interacting functions. This function gas'', or Turning gas'', is studied under various conditions, and evolves cooperative interaction patterns of considerable intricacy. These patterns adapt under the influence of perturbations consisting in the addition of new random functions to the system. Different organizations emerge depending on the availability of self-replicators.

Understanding the fate of heavy-metal contaminants in the environment is of fundamental importance in the development and evaluation of effective remediation and sequestration strategies. Among the factors influencing the transport of these contaminants are their chemical speciation and the chemical and physical attributes of the surrounding medium. Bacteria and the extracellular material associated with them are thought to play a key role in determining a contaminant's speciation and thus its mobility in the environment. In addition, the microenvironment at and adjacent to actively metabolizing cell surfaces can be significantly different from the bulk environment. Thus, the spatial distribution and chemical speciation of contaminants and elements that are key to biological processes must be characterized at micron and submicron resolution in order to understand the microscopic physical, geological, chemical, and biological interfaces that determine a contaminant's macroscopic fate. Hard x-ray microimaging is a powerful technique for the element-specific investigation of complex environmental samples at the needed micron and submicron resolution. An important advantage of this technique results from the large penetration depth of hard X-rays in water. This advantage minimizes the requirements for sample preparation and allows the detailed study of hydrated samples. This paper presents results of studies of the …

Analyzing D{sup 0} {yields} K{sup +}{pi}{sup -}{pi}{sup 0} decays, herein are presented the methods and results of a search for D{sup 0}-{bar D}{sup 0} mixing, a measurement of the branching ratio R {equivalent_to} {Lambda}(D{sup 0} {yields} K{sup +}{pi}{sup -}{pi}{sup 0})/{Lambda}(D{sup 0} {yields} K{sup -}{pi}{sup +}{pi}{sup 0}), and measurements of the contributions from D{sup 0} {yields} K{sup +}{rho}{sup -}, K*{sup +}{pi}{sup -}, K*{sup 0}{pi}{sup 0}; 230.4 fb{sup -1} of data collected from the BABAR detector at the PEP-II collider during 2000-2004 (Runs 1-4) are analyzed. An event-level tagging technique is developed, which facilitates the accurate determination of doubly Cabibbo-suppressed resonance contributions by suppressing background from Cabibbo-favored decays. The branching ratio is measured as R = (0.214 {+-} 0.008 (stat) {+-} 0.008 (syst))%, with (46.1 {+-} 3.3 (stat) {+-} 2.9 (syst))% of D{sup 0} {yields} K{sup +}{pi}{sup -}{pi}{sup 0} decays proceeding through the channel D{sup 0} {yields} K*{sup +}{pi}{sup -}. The data are consistent with the null-D-mixing hypothesis at a confidence level of 10%, and the expected value of {+-} {radical}(x{sup 2} + y{sup 2}) is measured as -0.013 {+-} 0.010 (stat), indicating negative interference between mixing and doubly Cabibbo-suppressed decay. The expected value of the integrated mixing rate is (x{sup 2} …

The Transmission Control Protocol (TCP) has been around for around 30 years, and in that time computer networks have increased in speed and reliability many times over. TCP has done very well to maintain stability and avoid collapse from congestion in the Internet with this incredible increase in speed. But as the speed of networks continues to increase, some assumptions about the underlying network that influenced the design of TCP may no longer hold valid. Additionally, modern networks often span many different types of links. For example, one end-to-end transmission may traverse both an optical link (high-bandwidth, low-loss) and a wireless network (low-bandwidth, high loss). TCP does not perform well in these situations. This survey will examine some of the reasons for this, focusing on high-bandwidth networks, and offer some solutions that have been proposed to fix these problems. This paper assumes basic knowledge of the TCP protocol.

This note is intended to document calculations of prompt radiation dose in region exterior to berm which now exists over the Transfer Line between the AGS and the Relativistic Heavy Ion Collider.

In 2005, the National Renewable Energy Laboratory (NREL) completed an assessment of the potential for solar and wind energy development on National Forest System (NFS) public lands managed by the US Department of Agriculture, U.S. Forest Service (USFS). This report provides an update of the analysis in the NREL report, and extends the analysis with additional siting factors for solar and wind energy. It also expands the scope to biomass and geothermal energy resources. Hydropower is acknowledged as another major renewable energy source on NFS lands; however, it was not analyzed in this project primarily because of the substantially different analysis that would be needed to identify suitable locations. Details about each renewable energy production technology included in the study are provided following the report introduction, including how each resource is converted to electrical power, and examples of existing power plants. The analysis approach was to use current and available Geographic Information System (GIS) data to map the distribution of the subject renewable energy resources, major siting factors, and NFS lands. For each major category of renewable energy power production, a set of siting factors were determined, including minimum levels for the renewable energy resources, and details for each of …

This paper illustrates the applicability of a sequential fluid mechanics, multi-zone chemical kinetics model to analyze HCCI experimental data for two combustion chamber geometries with different levels of turbulence: a low turbulence disc geometry (flat top piston), and a high turbulence square geometry (piston with a square bowl). The model uses a fluid mechanics code to determine temperature histories in the engine as a function of crank angle. These temperature histories are then fed into a chemical kinetic solver, which determines combustion characteristics for a relatively small number of zones (40). The model makes the assumption that there is no direct linking between turbulence and combustion. The results show that the multi-zone model yields good results for both the disc and the square geometries. The model makes good predictions of pressure traces and heat release rates. The experimental results indicate that the high turbulence square geometry has longer burn duration than the low turbulence disc geometry. This difference can be explained by the sequential multi-zone model, which indicates that the cylinder with the square bowl has a thicker boundary layer that results in a broader temperature distribution. This broader temperature distribution tends to lengthen the combustion, as cold mass within …

A novel, cost-effective, and environmentally benign process was developed to produce highly efficient carbon-based adsorbents (CBAs) from paper mill sludge. The production process required chemical activation of sludge using zinc chloride and pyrolysis at 750 C in N{sub 2} gas. The produced CBAs were characterized according to their surface area and pore size distribution using N{sub 2}-BET adsorption isotherm data. Further characterization of the surface and pore structure was conducted using a unified exponential/power law approach applied to small angle neutron scattering (SANS) data. The structural features analyzed by SANS revealed the dependence of porosity with zinc chloride concentration. The presence of inaccessible pores was also determined by contrast-match experiments.

At the end of RHIC's 2009 operation a dedicated run for the PP2PP experiment (part of the STAR experiment) took place from Jun 29 to Jul 06 2009. Polarized protons were accelerated to 100 GeV using ramp-file pp100-90pp2pp with a {beta}* = 22 m in IR6. Since only transverse polarization was required no rotator ramp was in use. The PP2PP experiment consists mainly of two Roman Pot detectors (one horizontal and one vertical) on either side of IR6 in the outgoing-beam arms between the Q3 and Q4 magnets. The yellow pots are in sector 5, the blue ones in sector 6. Roman Pot type detectors are installed inside the beampipe causing an accelerator safety concern. To address this concern there is a limit to the allowable total beam current in the machine while Roman Pots are enabled to move closer to the beam. This limit was set to a motion limit of 5 mm from the center of the beampipe and 50 {center_dot} 10{sup 11} beam current per ring. In order to reduce the background in the detectors, beams were scraped using the RHIC collimator system prior to moving the pots closer. This was typically repeated several times throughout a …

This report presents the analyses results for three samples obtained under RPP-PLAN-28509, Sampling and Analysis Plan for Building 241 702-AZ A Train. The sampling and analysis was done in response to problem evaluation request number PER-2004-6139, 702-AZ Filter Rooms Need Radiological Cleanup Efforts.

The double spherical harmonics angular approximation in the lowest order, i.e. double P{sub 0} (DP{sub 0}), is developed for the solution of time-dependent non-equilibrium grey radiative transfer problems in planar geometry. Although the DP{sub 0} diffusion approximation is expected to be less accurate than the P{sub 1} diffusion approximation at and near thermodynamic equilibrium, the DP{sub 0} angular approximation can more accurately capture the complicated angular dependence near a non-equilibrium radiation wave front. In addition, the DP{sub 0} approximation should be more accurate in non-equilibrium optically thin regions where the positive and negative angular domains are largely decoupled. We develop an adaptive angular technique that locally uses either the DP{sub 0} or P{sub 1} flux-limited diffusion approximation depending on the degree to which the radiation and material fields are in thermodynamic equilibrium. Numerical results are presented for two test problems due to Su and Olson and to Ganapol and Pomraning for which semi-analytic transport solutions exist. These numerical results demonstrate that the adaptive P{sub 1}-DP{sub 0} diffusion approximation can yield improvements in accuracy over the standard P{sub 1} diffusion approximation, both without and with flux-limiting, for non-equilibrium grey radiative transfer.

We propose a new, robustly scalable technique for phase locking multiple gain cores in a fiber structure based on antiguiding or radiative coupling, rather than the more commonly pursued method of evanescent wave phase locking. Our focus is on a ribbon-like geometry in which a waveguide region contains multiple gain cores arranged in a periodic array. The distinguishing feature of such antiguiding structures is that refractive index of the gain cores is lower than or equal to that of the surrounding waveguide regions. This is just the opposite of evanescently phase locked structures in which the gain cores have higher refractive index than the surrounding regions. The critical design considerations in the structures proposed within are: first that they strongly favor oscillation in a single transverse mode, and second that this strongly favored mode exhibits good intensity uniformity across the entire array of gain cores. We require single mode operation so that a static phase corrector placed in the near field of the ribbon laser's output can optimize the phase across the aperture to achieve a high Strehl ratio in the far field. The requirement that the strongly favored mode exhibit good uniformity across the entire array of gain cores …

This document serves as a User`s Manual and Reference for the logDaemon and client library. This package provides a general distributed message logging system. A logDaemon may be started anywhere on a subnet. A client which has linked in the client library is provided functions to open a connection to the logDaemon, log messages, and close the connection. The logDaemon maintains one or more log files (in simple ASCII or SDDS format) and an e-mail list based on specifications in a configuration file. Incoming messages are logged to the appropriate file and/or result in e-mail being sent.