A discussion is given of a figure of merit indicative of the stability of high intensity beam transport systems. A table is provided giving this quantity under various conditions, and the limits for solenoidal focusing systems are obtained. (PMA)

Because there is no limit to the energy or power that can be delivered by a neutral-beam injector, its use will be restricted by either its cost, size, or reliability. Studies show that these factors can be improved by the injector design, and several examples, taken from mirror reactor studies, are given.

Efforts were concentrated on plant operating modes. The Heber plant, which was previously designed for consistant brine temperature, was reviewed and changes necessary to accomodate declining brine temperature were determined. Resultant required modifications to the computer code GEOTHM were made. The engineering, in terms of sketches and equipment lists, needed to support the capital cost estimate was determined. Attempts to use the computer program GEOTHM to develop the heat and mass balances for plants with declining geothermal fluid temperature disclosed that this code alone cannot be used for this purpose because it does not include turbine stage pressure-drop equations. It was determined that the most expedient method for obtaining the data needed for this study would be to develop a separate small computer program containing these turbine equations. With the assistance of a turbine consultant, the detailed methodology for the program was developed, and coding was started. (MHR)

Temperature and salinity are two of the key properties of ocean water masses. The distribution of these two independent but related characteristics reflects the interplay of incoming solar radiation (insolation) and the uneven distribution of heat loss and gain by the ocean, with that of precipitation, evaporation, and the freezing and melting of ice. Temperature and salinity to a large extent, determine the density of a parcel of water. Small differences in temperature and salinity can increase or decrease the density of a water parcel, which can lead to convection. Once removed from the surface of the ocean where 'local' changes in temperature and salinity can occur, the water parcel retains its distinct relationship between (potential) temperature and salinity. We can take advantage of this 'conservative' behavior where changes only occur as a result of mixing processes, to track the movement of water in the deep ocean (Figure 1). The distribution of density in the ocean is directly related to horizontal pressure gradients and thus (geostrophic) ocean currents. During the Quaternary when we have had systematic growth and decay of large land based ice sheets, salinity has had to change. A quick scaling argument following that of Broecker and Peng …

Several factors limit the energy savings potential and increase the costs of energy-efficient technologies to consumers. These factors may usefully be placed into two categories; one category is what economists would define as market failures and the other is related to consumer preferences. This paper provides a conceptual framework for understanding the roles of these factors, and develops a methodology to quantify their effects on costs and potentials of two energy efficient end uses - residential lighting and clothes washers. It notes the significant roles played by the high implicit cost of obtaining information about the benefits of the two technologies and the apparent inability to process and utilize information. For compact fluorescent lamps, this report finds a conservative estimate of the cost of conserved energy of 3.1 cents per kWh. For clothes washers, including water savings reduces the cost of conserved energy from 13.6 cents to 4.3 cents per equivalent kWh. Despite these benefits, market share remains low. About 18 million tons of CO2 could be saved cost effectively from 2005 sales of these two technologies alone. The paper also notes that trading of carbon emissions will incur transaction costs that will range from less than 10 cents per …

We use a test particle simulation code to investigate electron cyclotron heating in a magnetic mirror well. A comparison is made between heating with one frequency and heating with two closely spaced frequencies. The code follows electron orbits in the presence of one or two monochromatic ECRH waves using guiding center equations and an equation for the electron gyrophase. Coulomb collisions with electrons and ions are simulated as a Monte Carlo scattering process. We find for the parameters of SM-1 that at the fundamental resonance the heating rate, or velocity rf diffusion coefficient, begins to decrease significantly from the quasilinear value for epsilon/sub e/ greater than or equal to 10 keV due to superadiabatic effects. As suggested by Howard et al., using multiple frequencies pushes the superadiabatic boundary to higher energies. For a given energy, the optimum frequency separations for two frequencies are those which cause the axial bounce resonances to interlace; i.e., odd multiples of the bounce frequency, ..omega../sub b/. This interlacing increases the chance of resonance overlap and thus stochasticity. If the frequency difference is equal to an even multiple of ..omega../sub b/, the diffusion coefficient returns to near its one frequency value. More generally, for more than …

Rainout commonly denotes the aggregate of phenomena associated with precipitation scavenging of radioactivity from a cloud of nuclear debris that is within a natural rain cloud. (In contrast, the term, washout, is applicable when the nuclear cloud is below the rain cloud and the term, fallout, commonly denotes the direct gravitational settling of contaminated solid material from a nuclear cloud.) Nuclear debris aerosols may be scavenged within natural clouds by a variety of different physical processes which may involve diffusion, convection, impaction, nucleation, phoresis, turbulence, and/or electricity among others. Processes which involve electrical aspects are scrutinized for their susceptibility to the intimate presence of the radioactive-cloud environment. This particular choice of electrical processes is not accidental. Nearly all of the listed processes were examined earlier by Williams. His rough estimates suggested that electrical effects, and to a lesser extent turbulence, could enhance the scavenging of those submicron aerosols which reside in the size-range that bridges the minimum in the scavenging rate coefficient which is commonly called the Greenfield gap. This minimum in the scavenging-rate coefficient is created by the simultaneous reduction of scavenging via diffusion and the reduction of scavenging via inertial impaction. However, Williams omitted the specific influence of …

Most neutral beamlines contain an iron-core ion-bending magnet that requires shielding between the end of the neutralizer and this magnet. This shielding allows the gas pressure to drop prior to the beam entering the magnet and therefore reduces beam losses in this drift region. We have found that the beam losses can be reduced even further by eliminating the iron-core magnet and the magnetic shielding altogether. The required bending field can be supplied by current coils without the iron poles. In addition, placement of the baffles and apertures can affect the cold gas entering the plasma region and the losses in the neutral beam due to re-ionization. In our study we varied the placement of the baffles, which determine the amount of pumping in each chamber, and the apertures, which determine the beam loss. Our results indicate that a baffle/aperture configuration can be set for either minimum cold gas into the plasma region or minimum beam losses, but not both.

The bronze matrix/niobium filament process has become established as a commercially viable method for producing multifilamentary Nb/sub 3/Sn superconductors. This paper describes a new method, the Modified Jelly-Roll (MJR) approach, which can produce a structure similar to that in a conventionally fabricated multifilamentary Nb/sub 3/Sn conductor. This approach utilizes alternate sheets of niobium expanded metal and bronze, which are rolled into a jelly-roll configuration and then extruded. During extrusion and subsequent drawing, the junctures in the niobium are elongated and the material develops a filamentary structure. This method may offer significant advantages in terms of reduced fabrication time and cost over the conventional approach. Results of a manufacturing development program will be presented in which two lengths of conductor were made to High-Field Test Facility conductor specifications. In addition, critical current and transition temperature measurements of the sub-elements used to construct the HFTF-type lengths will be reported.

High Efficiency Mist Eliminators (HEME) and High Efficiency Particulate Airfilters (HEPA) are to be used in the Defense Waste Processing Facility (DWPF) at the Savannah River Plant to remove volatile and semi-volatile effluents from the off-gases generated during the vitrification process. When removed, these filters are likely to contain radioactive contaminants, organics, and hazardous materials, which make their disposal by normal methods impractical. Hence, an alternative disposal method is needed. The alternative disposal method evaluated in this study is dissolution of the filters with caustic and acid solutions. Dissolution converts the waste into an aqueous stream, which can be transferred to the Tank Farm and disposed of by normal means. This process was shown to be effective on a small scale in earlier studies, but the results were not well documented and the studies were not performed on fouled filters.

During the period 7/9/92-10/8/92 a total of 80 samples (30 DOE Sample Bank samples and 50 other Penn State samples) of various sizes, not including DECS-17, were distributed. Fifteen of these samples were provided to DOE contractors. Six orders for a total of 80 30-gram bags of DECS-17 have been filled. All of these bags have been distributed to DOE dispersed catalyst contractors or those approved by DOE to receive the samples. A total of 188 data printouts were distributed. In addition, 15 special data requests were fulfilled by either search/sort and printout or creation of a data disk, resulting in distribution of limited information on over 1089 samples. Several preliminary requests for Sample Bank and Data Base information and price quotations have also been handled.

During the period 7/9/92-10/8/92 a total of 80 samples (30 DOE Sample Bank samples and 50 other Penn State samples) of various sizes, not including DECS-17, were distributed. Fifteen of these samples were provided to DOE contractors. Six orders for a total of 80 30-gram bags of DECS-17 have been filled. All of these bags have been distributed to DOE dispersed catalyst contractors or those approved by DOE to receive the samples. A total of 188 data printouts were distributed. In addition, 15 special data requests were fulfilled by either search/sort and printout or creation of a data disk, resulting in distribution of limited information on over 1089 samples. Several preliminary requests for Sample Bank and Data Base information and price quotations have also been handled.

Purpose of this study was to determine the {sup 237}Np input to the Purex process. The {sup 237}Np content of 639 g Pu/ton U irradiated fuel was found to be 1.78 {plus_minus} .09 g/ton of uranium at the 95% confidence level. Standard recovery for the chemical method was 96.7%, 98.0% for the sampling.

The Purex Processing Measurements Quality Control Program was designed to provide for orderly accumulation of measurements data suitable for statistical evaluation and to identify those elements of a measurement which, if improved, would result in significant reduction in overall measurement variation. This report gives an analysis of the audit data obtained at four transfer stations: L9 plutonium product loadout, K6 uranium product to storage, F15 salt waste to F16 and D5 dissolved feed to process. Estimates of variation caused by analytical, sampling and volume or weight instrumentation were computed and combined to give variation associated with a single batch transfer. Procedures for collection of future data that are more suitable for statistical evaluation are suggested. Methods used to compute random and fixed variation estimates are discussed.

Three fuel element assemblies, each containing U-Mo fuel plates, will be irradiated in a side test hole at KE-Reactor. This document presents efforts made to determine the heat generation rate of the fuel plates from data from a capsule mockup irradiation in HTR.

This article addresses the Ginzburg-Landau (GL) model for high-temperature superconductivity in thin films (two-dimensional periodic domains). A new gauge is defined to reduce the coupling between the equations for the nonzero components of the vector potential. The GL equations are written in a novel form by means of continuous link variables; this form is symmetric and has particular advantages for numerical analysis. The continuous GL model is approximated by a discrete model, which is shown to be second-order accurate. Two methods are used for the numerical solution of the discrete model - a modified Newton`s method, in combination with a sweeping algorithm for the solution of the linear system, and a time-like integration method based on gradient flow. Numerical experiments demonstrate that the discrete GL model leads to asymmetric solutions in the plane; symmetry is recovered only in the limit as the mesh size goes to zero. The results of computational experiments to find the upper critical field and establish an empirical power law for vortex interactions are given.

Experimental investigations were undertaken at Columbia University to determine the heat transfer and fluid flow characteristics of fuel elements for the Savannah River reactors. Primarily the tests simulated quatrefoil operation, but a number of tests directly applicable to the operation of extended surface fuel elements were performed. Data books were published in which the experimental data are tabulated.

Deep C Wind, a consortium headed by the University of Maine will test the first U.S. offshore wind platforms in 2012. In advance of final siting and permitting of the test turbines off Monhegan Island, residents of the island off Maine require reassurance that the noise levels from the test turbines will not disturb them. Pacific Northwest National Laboratory, at the request of the University of Maine, and with the support of the U.S. Department of Energy Wind Program, modeled the acoustic output of the planned test turbines.

I discuss recent results in radiative B decays from the Belle and BaBar collaborations. I report new measurements of the decay rate and CP asymmetries in b {yields} s{gamma} and b {yields} d{gamma} decays, and measurements of the photon spectrum in b {yields} s{gamma}. Radiative penguin decays are flavour changing neutral currents which do not occur at tree level in the standard model (SM), but must proceed via one loop or higher order diagrams. These transitions are therefore suppressed in the SM, but offer access to poorlyknown SM parameters and are also a sensitive probe of new physics. In the SM, the rate is dominated by the top quark contribution to the loop, but non-SM particles could also contribute with a size comparable to leading SM contributions. The new physics effects are potentially large which makes them theoretically very interesting, but due to their small branching fractions they are typically experimentally challenging.

None

Silicon is a promising anode material for Li-ion batteries in regarding of high capacity, low cost and safety, but it suffers poor cycling stability due to the pulverization induced by severe volume expansion/shrinkage (297%) during lithium insertion/extraction. In our previous investigation on aluminum nanorods anodes, it is found the selection of substrates in which Al nanorods grown plays the role in prevention of pulverization resulting in the increase of cycling life. Adapting this knowledge, we investigated the Si based nanorods anodes by tuning its composition and element distribution. Our results show that although the Si nanorods demonstrated higher initial anodic capacity of 1500 mAh/g, it diminished after 50 cycles due to morphology change and pulverization. By codepositing Cu, the Si-Cu composite nanorods demonstrated sustainable capacity of 500 mAh/g in 100 cycles attributing to its flexible and less brittle nature.

None

A baseline H{sup -} ion source and low energy beam transport system (LEBT) have been identified for Project X. The filament-discharge H{sup -} ion source has been fabricated by D-Pace, Inc. and is now in operation at LBNL. The source is capable of delivering over 10mA of H{sup -} beam in cw operation with normalized 4rms emittances less than 0.7 {pi} mm mrad. A two-solenoid magnetic lens LEBT system has been design. The design has been validated with simulations of beam transport for 5 mA 30 keV H- beams using various simulation codes.

Four series of glass compositions were selected, fabricated, and characterized as part of a study to determine the impacts of the addition of Crystalline Silicotitanate (CST) and Monosodium Titanate (MST) from the Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) glass waste form and the applicability of the DWPF process control models. All of the glasses studied were considerably more durable than the benchmark Environmental Assessment (EA) glass. The measured Product Consistency Test (PCT) responses were compared with the predicted values from the current DWPF durability model. One of the KT01-series and two of the KT03-series glasses had measured PCT responses that were outside the lower bound of the durability model. All of the KT04 glasses had durabilities that were predictable regardless of heat treatment or compositional view. In general, the measured viscosity values of the KT01, KT03, and KT04-series glasses are well predicted by the current DWPF viscosity model. The results of liquidus temperature (T{sub L}) measurements for the KT01-series glasses were mixed with regard to the predictability of the T{sub L} for each glass. All of the measured T{sub L} values were higher than the model predicted values, although most fell within the …