We consider backgrounds to the detection of the two-body hadronic decay modes of neutral B mesons and baryons. The largest background is due to the correlated production of pairs of high-p/sub T/ hadrons in the target, but this can be adequately rejected provided the experimental apparatus has sufficient resolution in mass and decay vertex. Another possible source of background arises from the production and decay of charmed and strange particles. Since these particles can travel considerable distances before decaying, they can give rise to backgrounds which may not be rejectable by means of vertex cut. We have simulated several backgrounds from charm, and we find them to be small compared to the expected level of signal. 8 refs., 1 fig., 2 tabs

Identifying the symmetry of the superconducting order parameter in the recently-discovered ferrooxypnictide family of superconductors, RFeAsO{sub 1-x}F{sub y}, where R is a rare earth, is a high priority. Many of the proposed order parameters have internal {pi} phase shifts, like the d-wave order found in the cuprates, which would result in direction-dependent phase shifts in tunneling. In dense polycrystalline samples, these phase shifts in turn would result in spontaneous orbital currents and magnetization in the superconducting state. We perform scanning SQUID microscopy on a dense polycrystalline sample of NdFeAsO{sub 0.94}F{sub 0.06} with T{sub c} = 48K and find no such spontaneous currents, ruling out many of the proposed order parameters.

The authors report a measurement of the branching fractions for {bar B} {yields} D{sup (*)}{pi}{ell}{sup -}{bar {nu}}{sub {ell}} decays based on 341.1 fb{sup -1} of data collected at the {Upsilon}(4S) resonance with the BABAR detector at the PEP-II e{sup +}e{sup -} storage rings. Events are tagged by fully reconstructing one of the B mesons in a hadronic decay mode. The obtain {Beta}(B{sup -} {yields} D{sup 0}{ell}{sup -}{bar {nu}}{sub {ell}}) = (2.33 {+-} 0.09{sub stat.} {+-} 0.09{sub syst.})%, {Beta}(B{sup -} {yields} D*{sup 0}{ell}{sup -}{bar {nu}}{sub {ell}}) = 5.83 {+-} 0.15{sub stat.} {+-} 0.30{sub syst.}%, {Beta}({bar B}{sup 0} {yields} D{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) = (2.21 {+-} 0.11{sub stat.} {+-} 0.12{sub syst.})% {Beta}({bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) = 5.49 {+-} 0.16{sub stat.} {+-} 0.25{sub syst.}%, {Beta}(B{sup -} {yields} D{sup +}{pi}{sup -}{ell}{sup -}{bar {nu}}{sub {ell}}) = (0.42 {+-} 0.06{sub stat.} {+-} 0.03{sub syst.})%, {Beta}(B{sup -} {yields} D*{sup +} {pi}{sup -}{ell}{sup -}{bar {nu}}{sub {ell}}) = (0.59 {+-} 0.05{sub stat.} {+-} 0.04{sub syst.})%, {Beta}({bar B}{sup 0} {yields} D{sup 0}{pi}{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) = (0.43 {+-} 0.08{sub stat.} {+-} 0.03{sub syst.})% and {Beta}({bar B}{sup 0} {yields} D*{sup 0} {pi}{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) = (0.48 {+-} 0.08{sub stat.} {+-} 0.04{sub syst.})%.

The order parameter of the recently-discovered ferric arsenide family of superconductors remains uncertain. Some early experiments on polycrystalline samples suggested line nodes in the order parameter, however later experiments on single crystals have strongly supported fully-gapped superconductivity. An absence of nodes does not rule out unconventional order: {pi} phase shifts between the separate Fermi sheets and time-reversal symmetry-breaking components in the order parameter remain possibilities. One test for unconventional order is scanning magnetic microscopy on well-coupled polycrystalline samples: d- or p-wave order would result in orbital frustration, leading to spontaneous currents and magnetization in the superconducting state. We have performed scanning SQUID microscopy on SmFeAsO{sub 0.85} and NdFeAsO{sub 0.94}F{sub 0.06}, and in neither material do we find spontaneous orbital currents, ruling out p- or d-wave order.

Several new and updated BABAR measurements of sin 2{beta} are presented, together with the latest constraints on the Unitarity Triangle angles {alpha} and {gamma}. The higher statistics now available allow more sophisticated analysis techniques, such as time-dependent Dalitz plot fitting. Combined world-average results place tight constraints on the Unitarity Triangle. There is good agreement among the measurements and with the unitarity of the CKM matrix. This represents an impressive verification of the Standard Model description of the quark-flavor sector and of CP violation.

Large-scale water injection at The Geysers, California, hasgenerated substantial benefits in terms of sustaining reservoir pressuresand production rates, as well as improving steam composition by reducingthe content of non-condensible gases (NCGs). Two effects have beenrecognized and discussed in the literature as contributing to improvedsteam composition, (1) boiling of injectate provides a source of "clean"steam to production wells, and (2) pressurization effects induced byboiling of injected water reduce upflow of native steam with large NCGconcentrations from depth. In this paper we focus on a possibleadditional effect that could reduce NCGs in produced steam by dissolutionin a condensed aqueous phase.Boiling of injectate causes pressurizationeffects that will fairly rapidly migrate outward, away from the injectionpoint. Pressure increases will cause an increase in the saturation ofcondensed phase due to vapor adsorption on mineral surfaces, andcapillary condensation in small pores. NCGs will dissolve in theadditional condensed phase which, depending upon their solubility, mayreduce NCG concentrations in residual steam.We have analyzed thepartitioning of HCl between vapor and aqueous phases, and have performednumerical simulations of injection into superheated vapor zones. Oursimulations provide evidence that dissolution in the condensed phase canindeed reduce NCG concentrations in produced steam.

None

The Heavy Duty Truck Engine Program at Cummins embodied three significant development phases. All phases of work strove to demonstrate a high level of diesel engine efficiency in the face of increasingly stringent emission requirements. Concurrently, aftertreatment system development and refinement was pursued in support of these efficiency demonstrations. The program's first phase focused on the demonstration in-vehicle of a high level of heavy duty diesel engine efficiency (45% Brake Thermal Efficiency) at a typical cruise condition while achieving composite emissions results which met the 2004 U.S. EPA legislated standards. With a combination of engine combustion calibration tuning and the development and application of Urea-based SCR and particulate aftertreatment, these demonstrations were successfully performed by Q4 of 2002. The second phase of the program directed efforts towards an in-vehicle demonstration of an engine system capable of meeting 2007 U.S. EPA legislated emissions requirements while achieving 45% Brake Thermal Efficiency at cruise conditions. Through further combustion optimization, the refinement of Cummins Cooled EGR architecture, the application of a high pressure common rail fuel system and the incorporation of optimized engine parasitics, Cummins Inc. successfully demonstrated these deliverables in Q2 of 2004. The program's final phase set a stretch goal of demonstrating …

Over the past few years, our group has gained expertise at developing low-temperature solution-based synthetic pathways to complex nanoscale solids, with particular emphasis on nanocrystalline intermetallic compounds. Our synthetic capabilities are providing tools to reproducibly generate intermetallic nanostructures with simultaneous control over crystal structure, composition, and morphology. This DOE-funded project aims to expand these capabilities to intermetallic superconductors. This could represent an important addition to the tools that are available for the synthesis and processing of intermetallic superconductors, which traditionally utilize high-temperature, high-pressure, thin film, or gas-phase vacuum deposition methods. Our current knowledge of intermetallic superconductors suggests that significant enhancements could result from the inherent benefits of low-temperature solution synthesis, e.g. metastable phase formation, control over nanoscale morphology to facilitate size-dependent property studies, robust and inexpensive processability, low-temperature annealing and consolidation, and impurity incorporation (for doping, stoichiometry control, flux pinning, and improving the critical fields). Our focus is on understanding the superconducting properties as a function of synthetic route, crystal structure, crystallite size, and morphology, and developing the synthetic tools necessary to accomplish this. This research program can currently be divided into two classes of superconducting materials: intermetallics (transition metal/post transition metal) and metal carbides/borides. Both involve the development and …

Stoneley guided waves in a fluid-filled fracture generally have larger amplitudes than other waves, and therefore, their properties need to be incorporated in more realistic models. In this study, a fracture is modeled as an infinite layer of viscous fluid bounded by two elastic half-spaces with identical parameters. For small fracture thickness, I obtain a simple dispersion equation for wave-propagation velocity. This velocity is much smaller than the velocity of a fluid wave in a Biot-type solution, in which fracture walls are assumed to be rigid. At seismic prospecting frequencies and realistic fracture thicknesses, the Stoneley guided wave has wavelengths on the order of several meters and an attenuation Q factor exceeding 10, which indicates the possibility of resonance excitation in fluid-bearing rocks. The velocity and attenuation of Stoneley guided waves are distinctly different at low frequencies for water and oil. The predominant role of fractures in fluid flow at field scales is supported by permeability data showing an increase of several orders of magnitude when compared to values obtained at laboratory scales. These data suggest that Stoneley guided waves should be taken into account in theories describing seismic wave propagation in fluid-saturated rocks.

These proceedings are based on lectures given at the Helmholtz International Summer School Heavy Quark Physics at the Bogoliubov Laboratory of Theoretical Physics, Dubna, Russia, during August 2008. I review the current status of CP violation in B meson decays from the B factories. These results can be used, along with measurements of the sides of the Unitarity Triangle, to test the CKM mechanism. In addition I discuss experimental studies of B decays to final states with 'spin-one' particles.

Composite Analyses (CA's) are required per DOE Order 435.1 [1], in order to provide a reasonable expectation that DOE low-level waste (LLW) disposal, high-level waste tank closure, and transuranic (TRU) waste disposal in combination with Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), Resource Conservation and Recovery Act (RCRA), and deactivation and decommissioning (D&D) actions, will not result in the need for future remedial actions in order to ensure radiological protection of the public and environment. This Order requires that an accounting of all sources of DOE man-made radionuclides and DOE enhanced natural radionuclides that are projected to remain on the site after all DOE site operations have ceased. This CA updates the previous CA that was developed in 1997. As part of this CA, an inventory of expected radionuclide residuals was conducted, exposure pathways were screened and a model was developed such that a dose to the MOP at the selected points of exposure might be evaluated.

The authors present a measurement of D{sup 0}-{bar D}{sup 0} mixing parameters using the ratios of lifetimes extracted from a sample of D{sup 0} mesons produced through the process D*{sup +} {yields} D{sup 0}{pi}{sup +}, that decay to K{sup -}{pi}{sup +}, I{sup -}K{sup +}, or {pi}{sup -}{pi}{sup +}. the Cabibbo-suppressed modes K{sup -}K{sup +} and {pi}{sup -}{pi}{sup +} are compared to the Cabibbo-favored mode K{sup -}{pi}{sup +} to obtain a measurement of ycp, which in the limit of CP conservation corresponds to the mixing parameter y. The analysis is based on a data sample of 384 fb{sup -1} collected by the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} collider. They obtain ycp = [1.24 {+-} 0.39(stat) {+-} 0.13(syst)]%, which is evidence of D{sup 0}-{bar D}{sup 0} mixing at the 3{sigma} level, and {Delta}Y = [-0.26 {+-} 0.36(stat) {+-} 0.08(syst)]%, where {Delta}Y constrains possible CP violation. Combining this result with a previous BABAR measurement of ycp obtained from a separate sample of D{sup 0} {yields} K{sup -}K{sup +} events, they obtain ycp = [1.03 {+-} 0.33(stat) {+-} 0.19(syst)]%.

Along with methane, methanol and methylated amines representimportant biogenic atmospheric constituents, thus not only methanotrophs,but also non-methanotrophic methylotrophs play a significant role inglobal carbon cycling. The complete genome of a model obligate methanoland methylamine utilizer, Methylobacillus flagellatus (strain KT) wassequenced. The genome is represented by a single circular chromosome ofapproximately 3 Mb pairs, potentially encoding a total of 2,766 proteins.Based on genome analysis as well as the results from previous genetic andmutational analyses, methylotrophy is enabled by methanol- andmethylamine dehydrogenases, the tetrahydromethanopterin-linkedformaldehyde oxidation pathway, the assimilatory and dissimilatorybranches of the ribulose monophosphate cycle, and by formatedehydrogenases. Some of the methylotrophy genes are present in more thanone (identical or non-identical) copy. The obligate dependence on singlecarbon compounds appears to be due to the incomplete tricarboxylic acidcycle, as no genes potentially encoding alpha ketoglutarate, malate orsuccinate dehydrogenases are identifiable. The genome of M. flagellatuswas compared, in terms of methylotrophy functions, to the previouslysequenced genomes of three methylotrophs: Methylobacterium extorquens(Alphaproteobacterium, 7 Mbp), Methylibium petroleophilum(Betaproteobacterium, 4 Mbp), and Methylococcus capsulatus(Gammaproteobacterium, 3.3 Mbp). Strikingly, metabolically and/orphylogenetically, methylotrophy functions in M. flagellatus were moresimilar to the ones in M. capsulatus and M. extorquens than to the onesin the more closely related M. petroleophilum, providing the firstgenomic …

The Geochemical Rate/RNA Integration Study (GRIST) project sought to correlate biogeochemical flux rates with measurements of gene expression and mRNA abundance to demonstrate the application of molecular approaches to estimate the presence and magnitude of a suite of biogeochemical processes. The study was headed by Lee Kerkhoff of Rutgers University. In this component of the GRIST study, we characterized ambient nutrient concentrations and measured uptake rates for dissolved inorganic nitrogen (DIN, ammonium, nitrate and nitrite) and dissolved organic nitrogen (urea and dissolved free amino acids) during two diel studies at the Long-Term Ecosystem Observatory (LEO-15) on the New Jersey continental shelf.

The Expert Panel Oversight Committee (EPOC) on Double-Shell Tank Corrosion Monitoring and Testing has been overseeing the Fiscal Year FY 2008 experimental program being performed at CC Technologies (CCT) to optimize the chemistry control for corrosion limits in Double-Shell Tanks (DSTs). The EPOC met at the M & D Professional Services Conference Facility on August 4 and 5, 2008 to discuss various aspects of that responsibility including FY 2009 planning. Formal presentations were made to update the EPOC on the these subjects.

We describe an approach for characterizing selective binding between oppositely charged ionic functional groups under biologically relevant conditions. Relative shifts in K-shell x-ray absorption spectra of aqueous cations and carboxylate anions indicate the corresponding binding strengths via perturbations of carbonyl antibonding orbitals. XAS spectra measured for aqueous formate and acetate solutions containing lithium, sodium, and potassium cations reveal monotonically stronger binding of the lighter metals, supporting recent results from simulations and other experiments. The carbon K-edge spectra of the acetate carbonyl feature centered near 290 eV clearly indicate a preferential interaction of sodium versus potassium, which was less apparent with formate. These results are in accord with the Law of Matching Water Affinities, relating relative hydration strengths of ions to their respective tendencies to form contact ion pairs. Density functional theory calculations of K-shell spectra support the experimental findings.

In this paper, we study the single bunch transverse beam dynamics in the presence of random displacements of resistive wall segments and focusing elements. Analytical formulas are obtained for long-range resistive wall wake, together with numerical results for short-range resistive wall wake. The results are applied to the LCLS project and some other proposed accelerators.

In widely distributed systems generally, and in science-oriented Grids in particular, software, CPU time, storage, etc., are treated as"services" -- they can be allocated and used with service guarantees that allows them to be integrated into systems that perform complex tasks. Network communication is currently not a service -- it is provided, in general, as a"best effort" capability with no guarantees and only statistical predictability. In order for Grids (and most types of systems with widely distributed components) to be successful in performing the sustained, complex tasks of large-scale science -- e.g., the multi-disciplinary simulation of next generation climate modeling and management and analysis of the petabytes of data that will come from the next generation of scientific instrument (which is very soon for the LHC at CERN) -- networks must provide communication capability that is service-oriented: That is it must be configurable, schedulable, predictable, and reliable. In order to accomplish this, the research and education network community is undertaking a strategy that involves changes in network architecture to support multiple classes of service; development and deployment of service-oriented communication services, and; monitoring and reporting in a form that is directly useful to the application-oriented system so that it may …

It has been more than twenty years since theorists started discussing supersymmetric model building/phenomenology. We review mechanisms of supersymmetry breaking/mediation and problems in each scenario. We propose a simple model to address those problems and discuss its phenomenology.

For accelerator designs with ultra short electron beams, beam dynamics study has to invoke the short-range wakefields. In this paper, we first obtain the short-range dipole mode resistive wall wakefield. Analytical approach is then developed to study the single bunch transverse beam dynamics due to this short-range resistive wall wake. The results are applied to the LCLS undulator.

The Upgraded Coal Interest Group (UCIG) is an EPRI 'users group' that focuses on clean, low-cost options for coal-based power generation. The UCIG covers topics that involve (1) pre-combustion processes, (2) co-firing systems and fuels, and (3) reburn using coal-derived or biomass-derived fuels. The UCIG mission is to preserve and expand the economic use of coal for energy. By reducing the fuel costs and environmental impacts of coal-fired power generation, existing units become more cost effective and thus new units utilizing advanced combustion technologies are more likely to be coal-fired.

In this paper we report on the results of a self-consistent calculation of CSR effects on a particle bunch moving through the benchmark Zeuthen bunch compressors. The theoretical framework is based on a 4D Vlasov-Maxwell approach including shielding from the vacuum chamber. We calculate the fields in the lab frame, where time is the independent variable, and evolve the phase space density/points in the beam frame, where arc length, s, along a reference orbit, is the independent variable. Some details are given in [2], where we also discuss three approaches, the unperturbed source model (UPS), the self consistent Monte Carlo (SCMC) method and the method of local characteristics. Results for the UPS have been presented for 5 GeV before [3], here we compare them with our new results from the SCMC and study the 500MeV case. Our work using the method of characteristics is in progress. The SCMC algorithm begins by randomly generating an initial ensemble of beam frame phase space points according to a given initial phase space density. The algorithm then reduces to laying out one arc length step. Assume that at arc length s we know the location of the phase space points and the history of …

The wetting of low melting point metals and Si-Ca-Al-Ti-O glasses on molybdenum has been investigated. The selected metals (Au, Cu, Ag) form a simple eutectic with Mo. Metal spreading occurs under nonreactive conditions without interdiffusion or ridge formation. The metals exhibit low (non-zero) contact angles on Mo but this requires temperatures higher than 1100 C in reducing atmospheres in order to eliminate a layer of adsorbed impurities on the molybdenum surface. By controlling the oxygen activity in the furnace, glass spreading can take place under reactive or nonreactive conditions. We have found that in the glass/Mo system the contact angle does not decrease under reactive conditions. In all cases, adsorption from the liquid seems to accelerate the diffusivity on the free molybdenum surface.