Serial/Series Title
Habitat Evaluation Procedures Report
5
Proceedings of the Workshop on Geothermal Reservoir Engineering
4
Analysis of Devonian Black Shales in Kentucky for Potential Carbon Dioxide Sequestration and Enhanced Natural Gas Production Quarterly Report
3
Development of More-Efficient Gas Flooding Applicable to Shallow Reservoirs Progress Report
3
Petroleum Supply Monthly
3
Annual Illness and Injury Surveillance Report
2
Establishment of an Industry-Driven Consortium Focused on Improving the Production Performance of Domestic Stripper Wells Quarterly Report
2
Fiscal Year 2001
2
Fiscal Year 2002
2
Fiscal Year 2003
2
28 More
Country
Decade
Month
Day
Language
3,813 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
3,813
next
2.1 Pan-WCRP Monsoon Modelling Workshop Summary
Ken Sperber led a discussion of the outcome of the Pan-WCRP Monsoon Modelling Workshop that was held at the University of California at Irvine from 15-17 June 2005. At the workshop presentations from key CLIVAR and GEWEX panels were presented to highlight the outstanding problems in modelling the Earth's monsoons. Additionally, presentations from invited experts were given to highlight important aspects of monsoon phenomena and processes, such as low-level jets, air-sea interaction, predictability, observational networks/studies, and model test beds etc. Since all persons attending the CLIVAR AAMP meeting were present for all, or most, of the monsoon workshop, a detailed description of the workshop presentations was not given. Rather, the discussion was focused on the recommendations of the workshop breakout groups and their relevance to CLIVAR AAMP. CLIVAR AAMP endorsed the near-term workshop recommendation of investigating the diurnal cycle using a hierarchy of models a key way forward for promoting CLIVAR/GEWEX interactions. In GCM studies CLIVAR researchers have identified the diurnal cycle as a forced ''mode'' of variability that is poorly represented in terms of amplitude and phase, especially in the case of precipitation. Typical phase errors of 6-12 hours are noted over both land and ocean in GCMs. CLIVAR …
Date:
June 28, 2005
Creator:
Sperber, K R
Object Type:
Report
System:
The UNT Digital Library
04 nuclear safety: pressure piping crack monitoring detection of metal overstress by acoustic emission. Progress report, July-September 1966
The three main areas of effort have been: (1) definition of the general acoustic response pattern related to the gross aspects of forming and extending a crack in various materials, (2) development of a monitor system prototype concept exclusive of transducers and (3) development of a suitable, high temperature transducer. Tests using double cantilever beam (DCB) specimens of various materials to establish conditions of crack formation and growth have indicated that material ductility is a major controlling factor in the acoustic response pattern. It appears to effect both acoustic emission intensity and the point in the crack formation-growth sequence at which the main emission occurs. A concept has been developed for the prototype of a full scale monitor system. Hardware development is being limited to the analyzer portion of the system at this time because it is the part most significant to demonstrating feasibility of the intended application. Signal level and signal rate are both being investigated as possible parameters for evaluating acoustic emission data. Of the various transducers for potential high temperature application, the capacitive or electrostatic transducer now looks most promising. A significant improvement in sensitivity has been achieved and a trial model used during recent tests produced …
Date:
October 28, 1966
Creator:
Hutton, P H
Object Type:
Report
System:
The UNT Digital Library
5.2 mW Single-Mode Power from a Coupled-Resonator Vertical-Cavity Laser
None
Date:
November 28, 2000
Creator:
Fischer, A. J.; Choquette, K. D.; Chow, W. W.; Allerman, A. A. & Geib, K. M.
Object Type:
Article
System:
The UNT Digital Library
5/10-MVA high temperature superconducting power transformer. Progress report for the period May 1998 - June 1999
None
Date:
July 28, 1999
Creator:
Intermagnetics General Corporation
Object Type:
Report
System:
The UNT Digital Library
8-(Hydroxymethyl)-3,N4-etheno-C, a potential carcinogenic glycidaldehyde product, miscodes in vitro using mammalian DNA polymerases
None
Date:
January 28, 2002
Creator:
Singer, B.; Medina, Michael; Zhang, Yanbin; Wang, Zhigang; Guliaev, Anton B. & Hang, Bo
Object Type:
Article
System:
The UNT Digital Library
10-30 Bev/c ELASTIC SCATTERING OF $pi$$sup +-$+ p, p + p, /anti p/ + p AND K$sup +-$ + p OVER THE /t/ RANGE 0.0005 TO 1 (Bev/c)$sup 2$
None
Date:
July 28, 1964
Creator:
Foley, K. J.; Gilmore, R. S.; Jones, R. S.; Lindenbaum, S. J.; Love, W. A.; Ozaki, S. et al.
Object Type:
Report
System:
The UNT Digital Library
25 content of initial lots of Hanford UO{sub 3}
At the time the first UO{sub 3} from so-called ``full-level`` Redox runs was shipped from 224U, the % U{sub 235} as determined in 222-S appeared high when compared with theoretical values from the burn-out curve. Close agreement between the 222-S results and % U{sub 235} determined by K-25 on lots 007, 008, and 009, however, indicated that a considerable heel of cold uranium in Redox had been blended with the first ``full level`` material. This explanation has been verified by data collected over the past weeks and provided this report. It has also been verified by the % U{sub 235} found in lots later than 010* (after most of cold uranium flushed out of Redox) which ranged from 0.66% to 0.64%.
Date:
May 28, 1952
Creator:
Work, J. B.
Object Type:
Report
System:
The UNT Digital Library
45-Day safety screening results for tank 241-U-102, push mode cores 143 and 144
This document is the 45-day report deliverable for tank 241-U-102 push mode core segments collected between April 16, 1996 and May 6, 1996 and received by the 222-S Laboratory between April 17, 1996 and May 8, 1996. The segments were subsampled and analyzed in accordance, with the Tank 241-U-102 Push Mode Core Sampling and analysis Plan (TSAP) (Hu, 1996) and the Safety Screening Data Quality Objective (DQO) (Dukelow, et al., 1995). The analytical results are included in Table 1. Attachment I is a cross reference to relate the tank farm identification numbers to the 222-S Laboratory LabCore sample numbers. The subsamples generated in the laboratory for analysis are identified in these diagrams with their sources shown. The diagram identifying the hydrostatic head fluid (HHF) blank is also included, Primary safety screening results and the raw data from Differential Scanning Calorimetry (DSC) and thermogravimetric analysis (TGA) analyses are included in this report. Two of the samples submitted for DSC analysis exceeded notification limits as stated in the Safety Screening DQO (Dukelow, et al., 1995). Cyanide analysis was requested on these samples and a Reactive System Screening Tool analysis was requested for the sample exhibiting the highest exothenn in accordance with the …
Date:
June 28, 1996
Creator:
Steen, F. H.
Object Type:
Report
System:
The UNT Digital Library
100 Areas technical activities report -- Engineering, May, 1950
This report discusses progress made by the Physical Chemistry Group and Pile Engineering Groups. Topics covered are as follows: x-ray studies--tube bore mining; physical expansion of capsule exposures; special capsule exposures; pile annealing; thermal conductivity and pile annealing; total stored energy; Sykes stored energy method; slug corrosion rate; effect of pressure drop on slug corrosion; exposure of P-10 fuel slugs; slug corrosion weight loss variables; vertical safety rod thimble corrosion; front tube corrosion; magnesium corrosion program; thimble corrosion program; horizontal thimble removal; metal exposure production tests; special pile measurements; carbon dioxide; H pile power level increase; vertical thimble temperature; graphite core samples; nine tube mock-up; and required header pressure.
Date:
June 28, 1950
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
100-B unit purge May 20, 1945
None
Date:
May 28, 1945
Creator:
Dahlen, P. A.
Object Type:
Report
System:
The UNT Digital Library
100-DR-1 radiological surveys
This report summarizes and documents the results of the radiological surveys conducted over the surface of the 100-DR-1 Operable Unit, Hanford Site, Richland, Washington. In addition, this report explains the survey methodology using the Ultrasonic Ranging and Data System (USRADS). The 100-DR-1 radiological survey field task consisted of two activities: characterization of the operable unit-specific background conditions and the radiological survey of the operable unit surface area. The survey methodology was based on utilization of USRADS for automated recording of the gross gamma radiation levels at or near 6 in. and at 3 ft from the surface soil. The purpose of the survey is to identify the location of unidentified subsurface radioactive material areas and any surface contamination associated with these areas. The radiological surveys were conducted using both a digital count rate meter with a NaI detector reporting in counts per minute (CPM) and a dose rate meter reporting micro-Roentgen per hour (uR) connected to a CHEMRAD Tennessee Corp. Series 2000 USRADS. The count rate meter was set for gross counting, i.e., Window ``out``. The window setting allows detection of low, intermediate, and high energy photons. The USRADS equipment is used to record the detector readings verses the location …
Date:
January 28, 1994
Creator:
Naiknimbalkar, N. M.
Object Type:
Report
System:
The UNT Digital Library
100-Mw Nuclear Power Plant Utilizing a Sodium Cooled, Graphite Moderated Reactor
The conceptual design of a 100 Mw(e) nuclear power plant is described. The plant utilized a sodium-cooled graphite-moderated reactor with stainless- steel clad. slightiy enriched UO/sub 2/ fuel. The reactor is provided with three main coolant circuits, and the steam cycle has three stages of regenerative heating. The plant control system allows automatic operation over the range of 20 to 100% load, or manual operation at all loads. The site, reactor, sodium systems, reactor auxiliaries, fuel handling, instrumentation, turbine-generator, buildings. and safety measures are described. Engineering drawings are included. (W.D.M.)
Date:
February 28, 1958
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
AN-102 Simulant Sr/TRU Precipitation and Ultrafiltration
The objective of these tests was to gather data on performance of the single-tube crossflow ultrafilter unit to de-water the simulant precipitate derived from a project approved tank 241-AN-102 simulant. Upon completion of the objectives with the approved R1 simulant, the simulant specification was changed and additional work at modified precipitation conditions was requested.
Date:
April 28, 2003
Creator:
Zamecnik, J. R.
Object Type:
Report
System:
The UNT Digital Library
200 Area Deactivation Project Facilities Authorization Envelope Document
Project facilities as required by HNF-PRO-2701, Authorization Envelope and Authorization Agreement. The Authorization Agreements (AA's) do not identify the specific set of environmental safety and health requirements that are applicable to the facility. Therefore, the facility Authorization Envelopes are defined here to identify the applicable requirements. This document identifies the authorization envelopes for the 200 Area Deactivation.
Date:
March 28, 2000
Creator:
Dodd, E. N.
Object Type:
Report
System:
The UNT Digital Library
200 area weekly report
None
Date:
July 28, 1955
Creator:
Christl, R. J.
Object Type:
Report
System:
The UNT Digital Library
A 200 MHz 35 MW Multiple Beam Klystron for Accelerator Applications Final Report
Calabazas Creek Research, Inc. (CCR) performed initial development of a compact and reliable 35 MW, multiple beam klystron (MBK) at 200 MHz with a pulse length of 0.125 ms and a 30 Hz repetition rate. The device was targeted for acceleration and ionization cooling of a muon collider, but there are several other potential applications in this frequency range. The klystron uses multiple beams propagating in individual beam tunnels to reduce space charge and allow reduction in the accelerating voltage. This allows a significant reduction in length over a single beam source. More importantly this allows more efficient and less expensive power supplies. At 200 MHz, the interaction circuit for a single beam klystron would be more than six meters long to obtain 50% efficiency and 50 dB gain. This would require a beam voltage of approximately 400 kV and current of 251 A for a microperveance of 1.0. For an eight beam MBK with the same beam perveance, a three meter long interaction circuit achieves the same power and gain. Each beam operates at 142 kV and 70A. The Phase I demonstrated that this device could be fabricated with funding available in a Phase II program and could achieve …
Date:
November 28, 2011
Creator:
Ives, R. Lawrence; Read, Michael; Ferguson, Patrick & Marsden, David
Object Type:
Report
System:
The UNT Digital Library
221-U Facility concrete and reinforcing steel evaluations specification for the canyon disposition initiative (CDI)
This describes a test program to establish the in-situ material properties of the reinforced concrete in Building 221-U for comparison to the original design specifications. Field sampling and laboratory testing of concrete and reinforcing steel structural materials in Building 221-U for design verification will be undertaken. Forty seven samples are to be taken from radiologically clean exterior walls of the canyon. Laboratory testing program includes unconfined compressive strength of concrete cores, tensile strength of reinforcing steel, and petrographic examinations of concrete cores taken from walls below existing grade.
Date:
May 28, 1998
Creator:
Baxter, J. T.
Object Type:
Report
System:
The UNT Digital Library
241-SY-101 DACS instrument problem screen (SCR 448) acceptance test procedure
The operability of the 241-SY-101 Data Acquisition and Control System (DACS) to provide proper control and monitoring of the mitigation mixer pump and instrumentation installed in the 241-SY-101 underground storage tank utilizing the [INSTPROB] screen will be systematically evaluated by the performance of this procedure.
Date:
June 28, 1999
Creator:
Ermi, A. M.
Object Type:
Report
System:
The UNT Digital Library
242-A evaporator vacuum condenser system
This document is written for the 242-A evaporator vacuum condenser system (VCS), describing its purpose and operation within the evaporator. The document establishes the operating parameters specifying pressure, temperature, flow rates, interlock safety features and interfacing sub-systems to support its operation.
Date:
September 28, 1994
Creator:
Smith, V. A.
Object Type:
Report
System:
The UNT Digital Library
300 AREA PACIFIC NORTHWEST NATIONAL LABORATORY FACILITY RADIONUCLIDE EMISSION POINTS AND SAMPLING SYSTEMS
Radionuclide emission points for 300 Area and Battelle Private facilities are presented herein. The sampling systems and associated emission specifics are detailed.
Date:
August 28, 2006
Creator:
Barfuss, Brad C.; Barnett, J. M. & Harbinson, L Jill
Object Type:
Report
System:
The UNT Digital Library
300 Area Treated Effluent Disposal Facility computer software release cover sheet and revision record
This supporting document contains the computer software release cover sheet and revision records for the 300 Area Treated Effluent Disposal Facility (TEDF). The previous revision was controlled by CH2M Hill which developed the software. A 7-page listing of the contents of directory C:{backslash}TEDF is contained in this report.
Date:
November 28, 1994
Creator:
McCarthy, R. J.
Object Type:
Report
System:
The UNT Digital Library
327 Building liquid waste handling options modification project plan
This report evaluates the modification options for handling radiological liquid waste (RLW) generated during decontamination and cleanout of the 327 Building. The overall objective of the 327 Facility Stabilization Project is to establish a passively safe and environmentally secure configuration of the 327 Facility. The issue of handling of RLW from the 327 Facility (assuming the 34O Facility is not available to accept the RLW) has been conceptually examined in at least two earlier engineering studies (Parsons 1997a and Hobart l997). Each study identified a similar preferred alternative that included modifying the 327 Facility RLWS handling systems to provide a truck load-out station, either within the confines of the facility or exterior to the facility. The alternatives also maximized the use of existing piping, tanks, instrumentation, controls and other features to minimize costs and physical changes. An issue discussed in each study involved the anticipated volume of the RLW stream. Estimates ranged between 113,550 and 387,500 liters in the earlier studies. During the development of the 324/327 Building Stabilization/Deactivation Project Management Plan, the lower estimate of approximately 113,550 liters was confirmed and has been adopted as the baseline for the 327 Facility RLW stream. The goal of this engineering study …
Date:
March 28, 1998
Creator:
Ham, J.E.
Object Type:
Report
System:
The UNT Digital Library
EEN-333, revised getter flash procedure
EWR No. VTE-188--Tubes processed by flashing getters immediately prior to seal-off from vacuum systems are compared for total residual gas pressure to tubes processed by flashing getters after tubes were sealed off vacuum systems. Comparisons of residual pressures determined from current flows in the cold cathode ion gauge.
Date:
June 28, 1960
Creator:
Brown, W.C.
Object Type:
Report
System:
The UNT Digital Library
A 350 MHz, 200 kW CW, Multiple Beam Inductive Output Tube - Final Report
This program developed a 200 kW CW, 350 MHz, multiple beam inductive output tube (MBIOT) for driving accelerator cavities. The MBIOT operates at 30 kV with a gain of 23 dB. The estimated efficiency is 70%. The device uses seven electron beams, each transmitting 1.4 A of current. The tube is approximately six feet long and weighs approximately 400 lbs. The prototype device will be evaluated as a potential RF source for the Advanced Photon Source at Argonne National Laboratory (ANL). Because of issues related to delivery of the electron guns, it was not possible to complete assembly and test of the MBIOT during the Phase II program. The device is being completed with support from Calabazas Creek Research, Inc., Communications & Power Industries, LLC. and the Naval Surface Weapons Center (NSWC) in Dahlgren, VA. The MBIOT will be initially tested at NSWC before delivery to ANL. The testing at NSWC is scheduled for February 2013.
Date:
November 28, 2012
Creator:
Ives, R. Lawrece; Collins, George; Read, David Marsden Michael; Eisen, Edward & Takuchi Kamura, Philipp Borchard
Object Type:
Report
System:
The UNT Digital Library