This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company's Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NO{sub x} combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NO{sub x} burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as parameters such as particulate characteristics and boiler efficiency.

This research strives to assess the impact of changing land use, nitrate deposition and CO{sub 2} fertilization on soil carbon storage. Our motivation is that this reservoir is the most likely candidate for the so-called missing carbon sink. We are working on several aspects of this problem by measuring carbon content, nitrogen content and radiocarbon ratios in paired soil samples from neighboring sites, to determine the impact of land use on soil carbon inventories and turnover times. We are also gathering information on how the C/N ratios in soils vary with climate and changing land use, in an effort to estimate how much carbon has been sequestered as a result of atmospheric fallout of NH{sub 4}OH and HNO{sub 3}. Finally, we are developing a soil greening model that uses CO{sub 2} growth-enhancement results and bomb radiocarbon-based estimates of soil carbon inventory response times.

Continued interest in high-energy {gamma} rays associated with fusion reactions has motivated an ongoing search for simple, effective measurement techniques. Past experiments have measured 16.7-MeV {gamma} rays with Compton-magnetic spectrometers. Some measurements have been performed with threshold Cherenkov detectors with enhanced sensitivity to high-energy {gamma} rays. The Compton spectrometers work quite well, but they require extensive calibrations and tend to be expensive and cumbersome. The threshold Cherenkov detectors are simpler to calibrate and physically compact, but have poor spectral definition and are vulnerable to background signals. This report is to describe a new type of {gamma}-ray detector, the MOLE, that may retain the simplicity of a threshold Cherenkov detector while still having sufficient energy discrimination to be effective for measuring high-energy {gamma}-rays in the presence of lower-energy {gamma}-ray fluxes.

The objective of this research is to determine the relationship between the size and shape of coal and petroleum macromolecules and their diffusion rates i.e., effective diffusivities, in catalyst pore structures. That is, how do the effective intrapore diffusivities depend on molecule configuration and pore geometry.

The acceptance and growth of Demand-Side Management (DSM) continues to increase in the US. According to latest estimates, total expenditures on electric utility DSM programs now exceed $1.2 billion annually, with these investments ranging from 1 to 5 percent of a utility's gross revenues. In addition, due to increasing environmental concerns and the high cost of new capacity, these expenditure levels are expected to increase. While the vast majority of these DSM programs are directed at the more traditional residential, commercial and industrial market sectors, significant opportunities still exist. One market segment that has not been the focus of attention but a critical sector from an economic development perspective for marry utilities -- is the agricultural and farmstead market. Although the total number of farms in the United States decreased by approximately 5 percent between 1985 and 1989, the land dedicated to farming still accounts for over 995 million acres. Furthermore, the total value of farm output in the United States has been steadily increasing since 1986. The limited penetration of energy efficiency measures in farmsteads provides an excellent opportunity for utilities to expand their DSM programming efforts to capture this non-traditional'' market segment, and at the same time assist …

Research is proposed on two groups of zeolite based catalysts that contain two transition elements. In one group both metals are fully reduced, in the other group one element is left as a positive ion; it can act as a chemical anchor'', or as a catalyst promoter for the reduced metal. The objective is to explore the potential of such materials for designing superior catalysts for synthesis and conversion of hydrocarbons and other energy carriers. ENDOR, EXAFS, CO-FTIR and TPD will be used to identify the interaction of Mn[sup 2+] ions with Rh[sub n] particles in the same zeolite cage. EXAFS at the Kedge of Fe and Pd, FTIR and Moessbauer spectroscopy will be used to characterize Fe ions and alloyed Fe atoms in PdFe/NaHY. The catalysts will be probed with CO hydrogenation and conversion of hydrocarbons. Methods Which proved successful in our study of Y supported bimetal systems will be applied to identify the state of Pt and Cu in ZSM-5, a catalyst system holding large promise for NO abatement, even in the presence of oxygen.

The objective of this study was to investigate the role of oceanic carbon chemistry in modulating the atmospheric levels of CO[sub 2]. It is well known that the oceans are the primary sink of the excess carbon pumped into the atmosphere since the beginning of the industrial period. The suspended particulate and the dissolved organic matters in the deep ocean play important roles as carriers of carbon and other elements critical to the fate of CO[sub 2]. In addition, the suspended particulate matter provides sites for oxidation-reduction reactions and microbial activities. The problem is of an intricate system with complex chemical, physical and biological processes. This report describes a methodology to describe the interconversions of different forms of the organic and inorganic nutrients, that may be incorporated in the ocean circulation models. Our approach includes the driving force behind the transfers in addition to balancing the elements. Such thermodynamic considerations of describing the imbalance in the chemical potentials is a new and unique feature of our approach.

The EMP consists of a Compliance Monitoring Sampling Program and a Supplemental monitoring Sampling Program. The Compliance Monitoring Sampling Program will be conducted during a summer and a winter Baseline periods during the Pre-Construction/Construction phases of the Project and during a summer and a winter period following the successful Startup and Operational phase of the completed Project. compliance monitoring consist of conducting all the sampling and observation programs associated with existing required Federal, State, and Local Regulations, Permits and Orders. These include air, water, and waste monitoring and OSHA and NESHAP monitoring. The Supplemental Monitoring Program will also be conducted during a summer and a winter Baseline periods during the Pre-Construction/Construction phases of the Demonstration Facility and during a summer and a winter period following the successful startup and Operational phase of the completed Facility. Supplemental Monitoring includes sampling of 27 additional streams that are important to measure operational or environmental performance and impacts of the installation of the new COG treatment facilities.

This is the tenth Technical Progress Report, describing work performed under DOE Contract No. DE-FC22-9OPC89663. The work falls under DOE's Clean Coal Technology Program category of Advanced Coal Cleaning.'' The 51-month project will provide the utility industry with a PC expert system to confidently and inexpensively evaluate the potential for coal cleaning, blending, and switching options to reduce emissionswhile producing lowest cost electricity. Specifically, this project will: (1)Enhance the existing Coal Quality Information System (CQIS) database and Coal Quality Impact Model (CQIM) to allow confident assessment of the effects of cleaning on specific boiler cost and performance. (2)Develop and validate a methodology, Coal Quality Expert (CQE) which allows accurate and detailed predictions of coal quality impacts on total power plant capital cost, operating cost, and performance based upon inputs from inexpensive bench-scale tests. The project consists of the following seven tasks: Project Management, Coal Cleanability Characterization, Pilot-Scale Combustion Testing, Utility Boiler Field Testing, CQIM Completion and Development of CQE Specification, Develop CQE and CQE Workstation Testing and Validation.

Two prototype Thermal Cycling Absorption Process (TCAP) columns have been metallurgically examined after retirement, to determine the causes of failure and to evaluate the performance of the column container materials in this application. Leaking of the fluid heating and cooling subsystems caused retirement of both TCAP columns, not leaking of the main hydrogen-containing column. The aluminum block design TCAP column (ABL block TCAP) used in the Advanced Hydride Laboratory, Building 773-A, failed in one nitrogen inlet tube that was crimped during fabrication, which lead to fatigue crack growth in the tube and subsequent leaking of nitrogen from this tube. The Third Generation stainless steel design TCAP column (Third generation TCAP), operated in 773-A room C-061, failed in a braze joint between the freon heating and cooling tubes (made of copper) and the main stainless steel column. In both cases, stresses from thermal cycling and local constraint likely caused the nucleation and growth of fatigue cracks. No materials compatibility problems between palladium coated kieselguhr (the material contained in the TCAP column) and either aluminum or stainless steel column materials were observed. The aluminum-stainless steel transition junction appeared to be unaffected by service in the AHL block TCAP. Also, no evidence of …

I describe an automated approach to partial evaluation based on simplification and implemented by program transformations. The approach emphasizes program algebra and relies on canonical forms and distributive laws to expose instances to which simplifications can be applied. I discuss some of the considerations that led to the design of this approach. This design discussion should be useful both in understanding the structure of the partial evaluation transformations, and as an example of how to approach the design of automated program transformations in general. This approach to partial evaluation has been applied to a number of practical examples of moderate complexity, including: the running example used in this paper, proving an identity for lists, and eliminating a virtual data structure from a specification of practical interest. The chief practical barrier to its wider application is the growth of the intermediate program text during partial evaluation. Despite this limitation, this approach has the virtues of being implemented, automated, and able to partially evaluate specifications containing implicit data, including some specifications of practical interest.

This task evaluated the materials compatibility of LaNi[sub 5-x]Al[sub x] (x= 0.3, 0.75) hydrides and palladium coated kieselguhr with austenitic stainless steel in hydrogen and tritium process environments. Based on observations of retired prototype hydride storage beds and materials exposure testing samples designed for this study, no materials compatibility problem was indicated. Scanning electron microscopy observations of features on stainless steel surfaces after exposure to hydrides are also commonly found on as-received materials before hydriding. These features are caused by either normal heat treating and acid cleaning of stainless steel or reflect the final machining operation.

The objective of this research is to determine the relationship between the size and shape of coal and petroleum macromolecules and their diffusion rates i.e., effective diffusivities, in catalyst pore structures. That is, how do the effective intrapore diffusivities depend on molecule configuration and pore geometry.

This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NO{sub x} combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NO{sub x} burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as parameters such as particulate characteristics and boiler efficiency.

We have modeled gyrotron windows and gyrotron amplifier sever structures for TE modes in the 100--150 GHz range and have computed the reflection and transmission characteristics from the field data. Good agreement with frequency domain codes and analytic analysis have been obtained for some simple geometries. We present results for realistic structures with lossy coatings and describe implementation of microwave diagnostics.

Yellow items used in Radiologically Controlled Areas (RCAs) that could contain hazardous metals were identified. X-ray fluorescence analyses indicated that thirty of the fifty-two items do contain hazardous metals. It is important to minimize the hazardous metals put into the wastes. The authors recommend that the specifications for all yellow items stocked in Stores be changed to specify that they contain no hazardous metals.

The LNCB{trademark} project involves retrofitting the two-nozzle cell burners at Dayton Power & Light`s, 605 HWe J.M. Stuart Unit {number_sign}4 Boiler near Aberdeen, Ohio with LNCB{trademark} (a burner and intregal NOx port). Previous pilot-scale tests have shown such an arrangement to achieve 50% reduction in NOx emission levels. This full-scale project will determine the commercial applicability of this technology. Fabrication and installation of all materials for the burner inversion and impeller change was completed during this quarter. The outage work, which began April 27th and concluded with the unit returning on line May 9th, went very smoothly. The parametric testing phase of the project actually began May 14th after correcting test equipment problems. Preliminary results show that the impeller change and burner inversion were successful. The Low NOx Cell{trademark} burners achieved better than 50% NOx reduction and carbon monoxide (CO) inside the lower furnace is less than 1000 ppm.

In order to rule out the superweak theory for CP violation, future experiments will try to find a difference between the CP-violating asymmetries in the decays B{sup 0} {yields} {psi} K{sub s} and B{sup 0} {yields} {pi}{sup +}{pi}{sup {minus}}. However, Winstein recently noted that, for some acceptable values of the CKM parameters, the standard model would give equal asymmetry parameters for these decays just as the superweak theory does. In this paper we show that, by considering both tree and penguin contributions to the decay amplitudes, the test can still be effective if a third asymmetry is measured with enough precision.

Contamination rates have been estimated for the RTF nitrogen heating and cooling system (NH and CS) due to tritium permeation through the walls of metal hydride vessels. Tritium contamination of the NH and CS will be seen shortly after start-up of the RTF with the majority of it coming from the TCAP units. Contamination rates of the NH and CS are estimated to exceed 400 Ci/year after three years of operation and will elevate tritium concentrations in the NH and CS above 6 {times} 10{sup {minus}3} {mu}Ci/cc. To reduce tritium activity in the NH and CS, a stripper or ``getter`` bed may need to be installed in the NH and CS. Increasing the purge rate of nitrogen from the NH and CS is shown to be an impractical method for reducing tritium activity due to the high purge rates required. Stripping of the NH and CS nitrogen in the glove box stripper system will give a temporary lowering of tritium activity in the NH and CS, but tritium activity will return to its previous level in approximately two weeks.

This paper presents a graphics renderer which incorporates new partitioning methodologies of memory and work for efficient execution on a parallel computer. The Task Adaptive domain decomposition scheme is an image space method involving dynamic partitioning of rectangular pixel area tasks. The author shows that this method requires little overhead, allows coherence within a parallel context, handles worst case scenarios effectively, and executes efficiently with little processor synchronization necessary. Previous research in the area of memory and work decompositions for graphics rendering has been primarily limited to simulation studies and little practical experience. The algorithm presented here has been implemented on a scalable distributed memory multiprocessor and tested on a variety of input scenes. The author presents a theoretical and practical analysis in order to contrast its predicted and actual success. The implementation analysis indicates that load imbalance is the major cause of performance degradation at the higher processor counts. Even so, on a variety of test scenes, an average rendering speedup of 79 was achieved utilizing 96 processors on the BBN TC2000 multiprocessor with a processor efficiency range of 66% to 94%.

This task evaluated the materials compatibility of LaNi{sub 5-x}Al{sub x} (x= 0.3, 0.75) hydrides and palladium coated kieselguhr with austenitic stainless steel in hydrogen and tritium process environments. Based on observations of retired prototype hydride storage beds and materials exposure testing samples designed for this study, no materials compatibility problem was indicated. Scanning electron microscopy observations of features on stainless steel surfaces after exposure to hydrides are also commonly found on as-received materials before hydriding. These features are caused by either normal heat treating and acid cleaning of stainless steel or reflect the final machining operation.

Two prototype Thermal Cycling Absorption Process (TCAP) columns have been metallurgically examined after retirement, to determine the causes of failure and to evaluate the performance of the column container materials in this application. Leaking of the fluid heating and cooling subsystems caused retirement of both TCAP columns, not leaking of the main hydrogen-containing column. The aluminum block design TCAP column (AHL block TCAP) used in the Advanced Hydride Laboratory, Building 773-A, failed in one nitrogen inlet tube that was crimped during fabrication, which lead to fatigue crack growth in the tube and subsequent leaking of nitrogen from this tube. The Third Generation stainless steel design TCAP column (Third generation TCAP), operated in 773-A room C-061, failed in a braze joint between the freon heating and cooling tubes (made of copper) and the main stainless steel column. In both cases, stresses from thermal cycling and local constraint likely caused the nucleation and growth of fatigue cracks. No materials compatibility problems between palladium coated kieselguhr (the material contained in the TCAP column) and either aluminum or stainless steel column materials were observed. The aluminum-stainless steel transition junction appeared to be unaffected by service in the AHL block TCAP. Also, no evidence of …

Most of the initial alloying work has been with the interior of pipe segments. The source electrode, an Inconel 625 rod, was inserted into carbon steel pipe segment cathode. Alloy layers were deposited on the interior surfaces of these segments; maximum thickness (8 [mu]) was obtained for a potential difference of 200 V.

This is the tenth Technical Progress Report, describing work performed under DOE Contract No. DE-FC22-9OPC89663. The work falls under DOE`s Clean Coal Technology Program category of ``Advanced Coal Cleaning.`` The 51-month project will provide the utility industry with a PC expert system to confidently and inexpensively evaluate the potential for coal cleaning, blending, and switching options to reduce emissions while producing lowest cost electricity. Specifically, this project will: (1)Enhance the existing Coal Quality Information System (CQIS) database and Coal Quality Impact Model (CQIM) to allow confident assessment of the effects of cleaning on specific boiler cost and performance. (2)Develop and validate a methodology, Coal Quality Expert (CQE) which allows accurate and detailed predictions of coal quality impacts on total power plant capital cost, operating cost, and performance based upon inputs from inexpensive bench-scale tests. The project consists of the following seven tasks: Project Management, Coal Cleanability Characterization, Pilot-Scale Combustion Testing, Utility Boiler Field Testing, CQIM Completion and Development of CQE Specification, Develop CQE and CQE Workstation Testing and Validation.