Serial/Series Title
Fiscal Year 1997
2
Fiscal Year 2003
2
Fiscal Year 2012
2
Irradiation Processing Department Monthly Record Report
2
Winter Fuels Report
2
ARM Facilities Newsletter
1
Active Cathodes for Super-High Power Density Solid Oxide Fuel Cells Through Space Charge Effects Quarterly Report
1
Airborne, Optical Remote Sensing of Methane and Ethane for Natural Gas Pipline Leak Detection Progress Report
1
Annual Illness and Injury Surveillance Report
1
Electric Power Monthly
1
18 More
Country
States
Counties
Decade
Month
Day
Language
3,495 Matching Results
Results open in a new window/tab.
Numerical simulations of mesoscale precipitation systems. Final progress report, 1 April-30 June 1981
A numerical model designed for the study of mesoscale weather phenomena is presented. It is a three-dimensional, time-dependent model based upon a mesoscale primitive-equation system, and it includes parameterizations of cloud and precipitation processes, boundary-layer transfers, and ground surface energy and moisture budgets. This model was used to simulate the lake-effect convergence over and in the lee of Lake Michigan in late fall and early winter. The lake-effect convergence is created in advected cold air as it moves first from cold land to the warm constant-temperature lake surface, and then on to cold land. A numerical experiment with a prevailing northwesterly wind is conducted for a period of twelve hours. Two local maxima of the total precipitation are observed along the eastern shore of Lake Michigan. The results in this hypothetical case correspond quite well to the observed precipitation produced by a real event in which the hypothetical conditions are approximately fulfilled.
Date:
May 12, 1982
Creator:
Dingle, A. N.
Object Type:
Report
System:
The UNT Digital Library
Radiological design criteria for fusion power test facilities
The quest for fusion power and understanding of plasma physics has resulted in planning, design, and construction of several major fusion power test facilities, based largely on magnetic and inertial confinement concepts. We have considered radiological design aspects of the Joint European Torus (JET), Livermore Mirror and Inertial Fusion projects, and Princeton Tokamak. Our analyses on radiological design criteria cover acceptable exposure levels at the site boundary, man-rem doses for plant personnel and population at large, based upon experience gained for the fission reactors, and on considerations of cost-benefit analyses.
Date:
February 12, 1982
Creator:
Singh, M.S. & Campbell, G.W.
Object Type:
Article
System:
The UNT Digital Library
pH meter probe assembly
An assembly is disclosed for mounting a pH probe in a flowing solution, such as a sanitary sewer line, which prevents the sensitive glass portion of the probe from becoming coated with grease, oil, and other contaminants, whereby the probe gives reliable pH indication over an extended period of time. The pH probe assembly utilizes a special filter media and a timed back-rinse feature for flushing clear surface contaminants of the filter. The flushing liquid is of a known pH and is utilized to check performance of the probe.
Date:
June 12, 1981
Creator:
Hale, C.J.
Object Type:
Patent
System:
The UNT Digital Library
At-sea test validation data needed to verify the NOAA/DOE CWP Analytic Code
Test data requirements are developed in this memorandum for the one-third scale Ocean Thermal Energy Conversion (OTEC) cold water pipe (CWP) at-sea tests. A major goal of the at-sea tests is to collect sufficient data so that the National Oceanic and Atmospheric Administration (NOAA)/Department of Energy (DOE) CWP Analytic Code can be validated. The code is examined to determine the individual responses requiring verification. The wave environment is then considered for prototype survival and the scaled test. The expected response of the OTEC CWP test article in the test environment is used to form a basis of the test plan. Requirements for the tests of standard configurations of the OTEC CWP test system are first planned followed by requirements for tests of alternate configurations and evolutions. The final product is a set of justified NOAA/CWP analytic code validation requirements.
Date:
March 12, 1980
Creator:
Major, R. A.
Object Type:
Report
System:
The UNT Digital Library
Water reuse achieved by zero discharge of aqueous waste
Plans for zero discharge of aqueous waste from ERDA's nuclear weapons plant near Denver are discussed. Two plants - a process waste treatment facility now under construction, and a reverse osmosis desalting plant now under design, will provide total reuse of waste water for boiler feed and cooling tower supply. Seventy million gallons of water per year will be conserved and downstream municipalities will be free of inadvertent pollution hazards.
Date:
January 12, 1976
Creator:
Kelchner, B. L.
Object Type:
Report
System:
The UNT Digital Library
Annual Outlook for US Electric Power, 1985
This report provides a history and projections of US electric utility markets. It includes summary information on the production of electricity, its distribution to end-use sectors, and on electricity, its distribution to end-use sectors, and on electricity costs and prices. Further, this publication describes the ownership structure of the industry and the operations of utility systems and outlines basic electricity generating technologies. The historical information covers the period from 1882 through 1984, while projections extend from 1985 through 1995. 9 figs., 8 tabs.
Date:
August 12, 1985
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Test problems in radiative transfer calculations
Several test problems are presented for evaluating the radiation diffusion equations. For spatial transport schemes, 1-D problems with known analytic solutions are tested on 2-D domains with non-orthogonal meshes. It is shown that a scheme based on the Finite Element Method is insensitive to grid distortions when the diffusion term is dominant. Other test problems deal with Compton scattering, specifically the 1-D Fokker-Planck equation coupled to an equation describing the change in electron temperature. The test problems model the evolution of a Planckian radiation field as it equilibrates with the electrons. In all cases, the numerical results are compared with the analytic ones. 15 refs., 9 figs., 7 tabs.
Date:
January 12, 1989
Creator:
Shestakov, A. I.; Kershaw, D. S. & Zimmerman, G. B.
Object Type:
Article
System:
The UNT Digital Library
Improved mutagen-testing systems in mice. Progress report, 1 June 1976--31 August 1977
Results are reported from studies on the production of chromosomal inversion by chemical treatment or irradiation of sperm in mice and to detect inversions by observing high frequencies of first meiotic anaphase bridges of their sons or by using chromosomal banding techniques to detect inverted segments cytologically. For each new inversion, which is either of considerable length or which has particularly useful experimental properties, we will determine its linkage group, mark it genetically, if possible, or place it with a genetically marked homologous chromosome, and study its cytological, physiological, and anatomical effects. The inversions are being used to construct recessive lethal testing systems for estimating mutational loads in populations exposed to radiation or either proved or potential chemical mutagens, to mark and maintain induced lethals for analysis of their potential dominant effects on fitness, and to study other basic problems in mammalian genetics.
Date:
October 12, 1977
Creator:
Roderick, T.H.
Object Type:
Report
System:
The UNT Digital Library
Solar heating and cooling of buildings, Phase 1 (non-residential). Recommendation for solar heating and cooling demonstrations as an integrated package
Recommendations to ERDA of four solar heating and cooling demonstration projects are presented. Recommendations include (1) the Westchester Work Center Building owned by Bell Telephone Company of Pennsylvania, (2) the Scottsdale County Courts Building in Scottsdale, Arizona, (3) Howard Johnson's Inc. Hotel in North Miami, Florida, and (4) a combination warehouse, manufacturing facility offered by Mr. John I. Ladd of Ladd Brothers, Pueblo, Colorado. A conceptual diagram and a fact sheet is included for each proposed demonstration site. The combined estimated cost for the four projects is $334,586. (WHK)
Date:
February 12, 1976
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Massachusetts State Briefing Book for low-level radioactive waste management
The Massachusetts State Briefing Book is one of a series of State briefing books on low-level radioactive waste management practices. It has been prepared to assist State and Federal agency officials in planning for safe low-level radioactive waste disposal. The report contains a profile of low-level radioactive waste generators in Massachusetts. The profile is the result of a survey of NRC licensees in Massachusetts. The briefing book also contains a comprehensive assessment of low-level radioactive waste management issues and concerns as defined by all major interested parties including industry, government, the media, and interest groups. The assessment was developed through personal communications with representatives of interested parties, and through a review of media sources. Lastly, the briefing book provides demographic and socioeconomic data and a discussion of relevant government agencies and activities, all of which may impact waste management practices in Massachusetts.
Date:
March 12, 1981
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Liquid-phase methanation/shift process development. Final technical report, September 1, 1980-November 30, 1981
This final technical report covers the work performed between September 1, 1980 and November 30, 1981 relating to Chem Systems' Liquid Phase Methanation/Shift Process. A total of 44 runs were completed covering testing of five commercially available catalysts at 900/sup 0/F, 1000 psig and 10,000 h/sup -1/ VHSV. The shifted methanation feed gas consisted of 63% H/sub 2/, 19% CO, 2% CO/sub 2/ and 16% CH/sub 4/. To determine the effects of steam, twenty of the scans had 15% steam injected into the feed gas. Each test ran for 100, 300, 600 or 1200 hours with continuous effluent sampling and temperature profile monitoring. At each of the termination points, a catalyst sample was taken from the hot spot section of the bed for analysis. Carbon was deposited on the catalyst under the methanation conditions studied. The rate of carbon deposition was primarily a function of catalyst properties and not of the thermodynamics of the methanation reaction system. In spite of heavy carbon deposition, the catalytic behavior for these systems generally remains unaffected. Physical plugging of the catalyst bed is the limiting condition of the process and not catalyst deactivation. In this respect, a controlled oxidation of the carbon deposits is …
Date:
May 12, 1982
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Nova: a high energy laser system
This review briefly describes the laser system, spatial filter, computer control system, and the 46 cm disk amplifier. (MOW)
Date:
October 12, 1979
Creator:
Godwin, R. O.
Object Type:
Article
System:
The UNT Digital Library
SCTI chemical leak detection test plan
Tests will be conducted on the CRBRP prototype steam generator at SCTI to determine the effects of steam generator geometry on the response of the CRBRP chemical leak detection system to small water-to-sodium leaks in various regions of the steam generator. Specifically, small injections of hydrogen gas (simulating water leaks) will be made near the two tubesheets, and the effective transport times to the main stream exit and vent line hydrogen meters will be measured. The magnitude and time characteristics of the meters' response will also be measured. This information will be used by the Small Leak Protection Base Program (SG027) for improved predictions of meter response times and leak detection sensitivity.
Date:
October 12, 1981
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Recent results from the PEP4-TPC on quark fragmentation
The physics goals for the PEP-4/PEP-9 experiment concentrate on two areas: the fragmentation properties of quarks and gluons produced in e+e- annihilation, and the investigation of hadron production in 2-photon collisions. Only the first of these topics is addressed. Despite the many successes of QCD in the description of deep inelastic reactions, the basic fragmentation process of quarks and gluons is not very well understood. This lack of knowledge has been shown to jeopardize precise test of QCD, such as the accurate determination of the strong coupling constant. With its ability to disentangle complex hadronic events and to identify most of the final state particles, the TPC allows new and more sensitive tests of fragmentation models. A brief description of the detector is given and particle identification by ionization energy loss is described. Next, the inclusive production of stable hadrons and of resonances is discussed, and limits on the inclusive production of fractional charged particles are given. A new analysis of long-range correlations in e+e- annihilation is given.
Date:
November 12, 1983
Creator:
Hofmann, W.
Object Type:
Article
System:
The UNT Digital Library
Electric Power Monthly, September 1991. [CONTAINS GLOSSARY]
This publication provides monthly statistics at the national, Census division, and state levels for net generation, fuel consumption, fuel stocks, quantity and quality of fuel, cost of fuel, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fuel are also displayed at the North American Electric Reliability Council (NERC) region level. Additionally, statistics at the company and plant level are published in the EPM on capability of new plants, net generation, fuel consumption, fuel stocks, quantity and quality of fuel, and cost of fuel. 4 figs., 63 tabs.
Date:
September 12, 1991
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Further comments on W physics at ISABELLE energies
A partial review of the history of weak interactions and the W boson is given in order to show the trend of the development of this study. 31 references. (JFP)
Date:
October 12, 1977
Creator:
Wang, L. L.
Object Type:
Report
System:
The UNT Digital Library
Unix version of CALOR89 for calorimeter applications
CALOR89 is a system of coupled Monte Carlo particle transport computer codes which has been successfully employed for the estimation of calorimeter parameters in High Energy Physics. In the past CALOR89 has been running on various IBM machines and on CRAY X-MP at Lawrence Livermore Lab. These machines had non-unix operating systems. In this report we present a UNIX version of CALOR89, which is especially suited for the UNIX work stations. Moreover CALOR89 is also been supplemented with two new program packages which makes it more user friendly. CALPREP is a program for the preparation of the input files for CALOR89 in general geometry and ANALYZ is an analysis package to extract the final results from CALOR89 relevant to calorimeters. This report also provides two script files LCALOR and PCALOR. LCALOR runs CALOR89 sequences of programs and EGS4 for a given configuration sequentially on a single processor and PCALOR concurrently on a multiprocessor unix workstation.
Date:
May 12, 1992
Creator:
Handler, T. (Tennessee Univ., Knoxville, TN (United States). Dept. of Physics and Astronomy); Job, P.K.; Price, L.E. (Argonne National Lab., IL (United States). High Energy Physics Div.) & Gabriel, T.A. (Oak Ridge National Lab., TN (United States))
Object Type:
Report
System:
The UNT Digital Library
An Investigation of the Corrosion Resistance of Brazing Alloys for Austenitic Stainless Steel Fuel Elements for Service in 565 F Pressurized Water
Since brazing was the method selected for joining the stainless steel SM- l reactor fuel element, corrosion studies were conducted on various potential brazing alloys to evaluate their resistance under the approximate pressurized- water conditions of the SM-1. The program consisted mainly of testing type 304L stainless steel T'' joints brazed with selected alloys in quiescent, degassed, and deionized autoclaved water at 565 deg F under 1200-psi pressure. In the initial phase of the investigation, tests were limited in duration to l000 hr in order to quickly screen some 18 potential alloys for longer time testing. Based on weight-change data and the metallographic examinations, five of the 18 alloys exhibited sufficient corrosion resistance to warrant further investigation. These alloys were subjected to autoclave tests of 12 and 16 months. In these extended tests, 1 cc O/sub 2/liter and a mixture of 1 cc O/sub 2/liter plus 50 cc H/sub 2/liter, respectively, were added to the water to more closely simulate SM- 1 reactor water conditions and to evaluate the effect of different gaseous additions on the corrosion behavior of the alloys. On the basis of weight-change data and metallographic examination after long-term exposure of the tested stainless steel-base joint; these …
Date:
April 12, 1962
Creator:
Beaver, R. J.; Leitten, C. F. Jr. & English, J. L.
Object Type:
Report
System:
The UNT Digital Library
Test and evaluation of the BBC CQK 200-4 modulator tube for the MFTF sustaining neutral beam power supply system
The BBC CQK 200-4 Tube was tested by Aydin at LLL, to confirm that it would switch 90 kV after conducting 88 amperes for 30 seconds. The CQK 200-4 is a recent modification of the CQK 200-3, an Rf transmitter tube designed for continuous loading, to increase the anode hold-off voltage to 150 kV. During the design life of the tube it will be subjected to 10/sup 5/ to 10/sup 6/ cyclic thermal loads. Two concerns are that (1) during the 30 second high current load, the screen grid may have excessive dissipation causing a loss of control of the tube, and (2) the cyclic temperature-induced stresses in the anode may cause fatigue failures that will reduce the tube's useful life. The first concern was addressed by performing full scale tests at the LLL test facility.
Date:
November 12, 1979
Creator:
Eckard, R.D.; Van Ness, H.W. & Hesselgrave, D.
Object Type:
Article
System:
The UNT Digital Library
Method for cleaning solution used in nuclear-fuel reprocessing.
A nuclear fuel processing solution containing: (1) hydrocarbon diluent; (2) tri-n-butyl phosphate or tri-2-ethylhexyl phosphate; and (3) monobutyl phosphate, dibutyl phosphate, mono-2-ethylhexyl phosphate, di-2-ethylhexyl phosphate, or a complex formed by plutonium, uranium, or a fission product thereof with monobutyl phosphate, dibutyl phosphate, mono-2-ethylhexyl phosphate, or di-2-ethylhexyl phosphate is contacted with silica gel having alkali ions absorbed thereon to remove any degradation products from said solution. The principal impurities removed from TBP solvent by the process of this invention are monobutyl phosphate, dibutyl phosphate, UO/sub 2//sup 2 +/, Pu/sup 4 +/, and fission products of plutonium and uranium complexed with monobutyl phosphate or dibutyl phosphate. Nitric acid is also removed from the TBP solution by the treated silica gel. Conventional adsorption column techniques are applicable for the process of the invention.
Date:
May 12, 1981
Creator:
Tallent, O. K.; Dodson, K. E. & Mailen, J. C.
Object Type:
Patent
System:
The UNT Digital Library
Conductor for a fluid-cooled winding and method for making same
A conductor and method of making the conductor are provided for use in winding electrical coils which are cooled by a fluid communicating with the conductor. The conductor is cold worked through twisting and reshaping steps to form a generally rectangular cross section conductor having a plurality of helical cooling grooves extending axially of the conductor. The conductor configuration makes it suitable for a wide variety of winding applications and permits the use of simple strip insulation between turns and perforated sheet insulation between layers of the winding.
Date:
May 12, 1981
Creator:
Kenney, W. J.
Object Type:
Patent
System:
The UNT Digital Library
Equity Oil Company BX in situ oil shale project, Piceance Basin, Colorado. Environmental quarter report, March 1-May 31, 1981
This report has been organized into three sections for ease of review. Section A - Air Resources covers data collected by the 100-foot tower between September and December 1980. Section B - Water Resources covers data collected since the last Quarterly Report. Section C - Aquatic Biology covers data collected since January 1981. Laboratory analysis results of all water samples show no significant changes from previous sample have occurred. The alluvial wells did exhibit slightly higher concentrations of phenols. Presently no baseline record exists for these wells to establish the normal levels of phenols in the alluvial ground water. Laboratory analysis of all sampling locations are presented in Appendix B. Aquatic biology covers data collected during the initial two aquatic biology field sampling trips of 1981. Benthic invertebrates, periphyton algae, and a fishery survey was conducted. Stream observations indicate that the stream habitat has remained unchanged since the August 1980 field visit. (ATT)
Date:
June 12, 1981
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
ZONE - a finite element mesh generator. [2-D, for CDC 7600]
The ZONE computer program is a finite element mesh generator that produces the nodes and element description of any two-dimensional geometry. The geometry is subdivided into a mesh of quadrilateral and triangular zones arranged sequentially in an ordered march through the geometry. The order of march can be chosen so that the minimum bandwidth is obtained. The node points are defined in terms of the x and y coordinates in a global rectangular coordinate system. The zones generated are quadrilaterals or triangles defined by four node points in a counterclockwise sequence. Node points defining the outside boundary are generated for slide lines and to describe pressure boundary conditions. The mesh that is generated can be used as input to any two dimensional as well as any axisymmetrical structure program. The following points are taken up: program concept and characteristics; regions; layers; meridians (offset, circular arc, ellipse); rays; common characterstics - rays and meridians, ZONE input description; output files; examples; and program availability. Also generated is the input to the program PLOT. 15 figures. (RWR)
Date:
March 12, 1980
Creator:
Burger, M.J.
Object Type:
Report
System:
The UNT Digital Library
NMR measurements in SSC dipole D00001
The first 16.5 m long SSC dipole magnet (D00001) had its field intensity measured as a function of position with a custom made NMR magnetometer. A short description of the probe is presented. The data obtained (most of it near 2 T spaced apart by one inch) shows an average transfer function of 1.02830 T/KA with position dependent values deviating from the average by up to .00130 T/KA revealing contruction inhomogeneities that were measured with a sensitivity of 25 ppM.
Date:
September 12, 1986
Creator:
Kuchnir, M.; Schmidt, E.E.; Hanft, R.W. & Strait, J.B.
Object Type:
Report
System:
The UNT Digital Library