Novel tissue mimicking materials have been developed for cancer treatment research. In the present research work, the tissue mimicking material is printed using 3D bioprinting technology. The nanoparticles are homogeneously mixed with tissue mimicking materials to enhance the heating capacity. The thermal conductivity of tissue mimicking materials is measured using a micropipette thermal sensor (MTS). Further, the optimal value is identified based on optimization technique and incorporated into a theoretical model to predict the surface temperature of microsphere. The heat conduction governing equation with Lambert law is numerically solved using COMSOL Multiphysics software. To validate the present simulation results, the experiments are conducted using a continuous laser system.

This thesis project investigates the configuration of an enclosed evaporation chamber with the intention of converting seawater into potable freshwater. The evaporation chamber's sole heat source is provided by a Fresnel lens, located above the chamber, which concentrates sunlight onto a 3-inch diameter focal plate built into the core of the chamber. The design of the evaporation chamber is modeled after a solar still and is coupled with a heat exchanger to boost efficiency of the system. The chamber was designed with the objectives of being portable, lightweight, low cost, corrosion resistant, interchangeable, and size convenient with the goal of producing 1 Liter of freshwater per hour of operation. The evaporation chamber consists of two primary components, a core and an attached arrangement of fins, all of which are heated via the Fresnel lens. A consistent intake of 2 grams/second of saltwater enters from the top of the chamber and is then gravity fed across the fins. Fin orientation has been designed to inhibit the flow rate of water within the chamber, maximizing the surface area of contact with the heated fins. The evaporation chamber was modeled through SOLIDWORKS and underwent a physical optimization study to reduce material usage while …

The recipes of optical radiative properties manipulation are their materials chemistry, nano/microscale geometry, and transport properties of quasiparticle carriers such as photons, phonons, and electrons. The important technical element in optical properties is the dielectric function of materials, which is different for metals, dielectrics, 2D materials, and phase transition materials. Graphene has a unique electrical conductivity profile which have metallic nature depending on the frequency, but also has a negative thermal expansion coefficient that makes graphene unique. Hence, graphene creates wrinkles when deposited on the substrate as temperature decreases to room temperature from high substrate temperature. We also study phase transition material, particularly vanadium dioxide that transitions from insulating to metallic phase based on temperature change; we investigate its role in far-field thermal radiation. Other transition metal oxides are studied as a thermally and electrically tunable plasmonic gratings: Transition metal oxides include vanadium dioxide, tungsten trioxide, and molybdenum trioxide. The work demonstrates plasmonic phenomena and absorptance/emittance tunability. First, surface plasmon polariton along the graphene (SPPG) when wrinkles are formed above the plasmonic grating is studied. The resonance peak shift is modeled for both magnetic polariton (MP) with inductor-capacitor (LC) circuit and SPPG with Fabry-Perot phase change model. Second, the self-adaptive …

Recent advances in manufacturing and growing concerns on the sustainability of aviation environment have led to a remarkable interest in electrical unmanned aerial systems (UASs) in the past decade. Among various UAS types, the newly designed quadrotor biplane tailsitter class is capable of delivering a wide range of civilian and military tasks, relying on its Vertical Take-Off and Landing (VTOL) capability as well as great maneuverability. Nevertheless, as such UASs employ rotors to generate thrust, and wings to generate lift, and operate at less-understood low to mid-Reynolds flow regime, they experience complicated flight aerodynamics with a noise generation mechanism which is different from common aircrafts. The present work aims at addressing this knowledge gap by studying the aerodynamics and aeroacoustics of a UAS of this type designed by the Army Research Lab. High-fidelity computational fluid dynamics (CFD) simulations are carried out for a wide range of operating conditions to understand the physics involved in the UAS aerodynamics and characterize its performance. Relying on the CFD results, a physics-informed reduced order model (ROM) is developed based on machine learning algorithms, to predict the propellers effects on the wings and calculate the dominant loads. The results of this study indicate that the …

An enhanced thermal imaging concept made possible through the development of a gradient-indexed metamaterial infrared detector that offers broadband transmission and reflection in THz waves. This thesis proposes a proof of feasibility for a metamaterial infrared detector containing an anti-reflective coating with various geometrically varying periodic metasurfaces, a gradient-indexed dielectric multilayer for near-perfect longpass filtering, and a gradient index of refraction (GRIN) metalens for enhanced focal plane thermal imaging. 2D Rigorous Coupled-Wave Analysis (RCWA) is used for understanding the photonic gratings performance based on material selection and varying geometric structure. Finite Difference Time Domain (FDTD) is used to characterize performance for a diffractive metalens by optimizing the radius and arrangement of cylindrical nanorods to create a desired phase profile that can achieve a desired focal distance for projections on a detector for near- to far-infrared thermal imaging. Through combining a micromachined anti-reflective coating, a near-perfect longpass filter, and metamaterial GRIN metalens, infrared/THz focal plane thermal imaging can obtain faster photo-response and image quality at targeted wavelengths, which allows for scientific advancements in electro-optical devices for the Department of Defense, aerospace, and biochemical detection applications.

Additively manufactured (AM) 316L and 17-4PH stainless steel parts, concretely made by laser powder bed fusion (L-PBF), are characterized and micro-mechanical properties of those steels are analyzed. This study also explored and extended to proton irradiation and small-scale mechanical testing of those materials, to investigate how irradiation affects microstructural evolution and thus mechanical properties at the surface level, which could be detrimental in the long term in nuclear applications. In-depth anisotropy analysis of L-PBF 316L stainless steel parts with the variations of volumetric energy density, a combined study of nanoindentation with EBSD (electron backscatter diffraction) mapping is shown to be an alternative methodology for enriching qualification protocols. Each grain with a different crystallographic orientation was mapped successfully by proper indentation properties. <122> and <111> oriented grains displayed higher than average indentation modulus and hardness whereas, <001>, <101>, and <210> oriented grains were found to be weaker in terms of indentation properties. Based on an extensive nanoindentation study, L-PBF 17-4 PH stainless steels are found to be very sensitive to high load rates and irradiation further escalates that sensitivity, especially after a 0.25 s-1 strain rate. 3D porosity measurement via X-ray microscope ensures L-PBF stainless steel parts are of more than …

Immersed boundary (IB) methods are attractive due to their ability to simulate flow over complex geometries on a simple Cartesian mesh. Unlike conformal grid formulation, the mesh does not need to conform to the shape and orientation of the boundary. This eliminates the need for complex mesh and/or re-meshing in simulations with moving/morphing boundaries, which can be cumbersome and computationally expensive. However, the imposition of boundary conditions in IB methods is not straightforward and numerous modifications and refinements have been proposed and a number of variants of this approach now exist. In a nutshell, IB methods in the literature often suffer from numerical oscillations, implementation complexity, time-step restriction, burred interface, and lack of generality. This limits their ability to mimic conformal grid results and enforce Neumann boundary conditions. In addition, there is no generic IB capable of solving flow with multiple potentials, closely/loosely packed structures as well as IBs of infinitesimal thickness. This dissertation describes a novel 2$ ^{\text{nd}} $ order direct forcing immersed boundary method designed for simulation of two- and three-dimensional incompressible flow problems with complex immersed boundaries. In this formulation, each cell cut by the IB is reshaped to conform to the shape of the IB. IBs …

Machine learning is fast growing field as it can be applied to solve a large amount of problems. One large subsection of machine learning are artificial neural networks (ANN), these work on pattern recognition and can be trained with data sets of known solutions. The objective of this thesis is to discuss the creation of an ANN capable of classifying differences in propylene glycol concentrations, up to 10%. Utilizing a micro pipette thermal sensor (MTS) it is possible to measure the heat propagation of a liquid from a laser pulse. The ANN can then be trained beforehand with simulated data and be tested in real time with temperature data from the MTS. This method could be applied to find the thermal conductivity of unknown fluids and biological samples, such as cells and tissues.

The present study investigates vortex phase separator (VPS) technology as a new approach for a liquid amine CO2 removal system. Experimental results obtained using a 99.99% pure CO2 stream and liquid amine with varying concentrations demonstrate the VPS' ability to decrease CO2 volume at its gas outlet. Operating parameters such as CO2 flow rate, relative humidity (RH), and temperature were systematically varied during experimental procedure, as well as working fluid temperature, volume, and flow rate. The subscale design for a VPS with a 3" inner diameter, 3.5" outer diameter, and 3.63" height removed a maximum of 84% of CO2 from a CO2 stream at 3.7 SCFH flow rate, 14°C temperature, and 82% RH, using 100 mL of 100% amine circulated at 1.52 LPM flow rate. The designed VPS also showed to be effective in removing relative humidity of the CO2 stream by up to 26% for the stated parameters. Regeneration of liquid amine in the VPS system is also proposed to allow for continuous CO2 removal. The results obtained in this work characterize the VPS system for CO2 removal in terms of various operating parameters for the gas (CO2) and liquid (liquid amine) phases, as well as provide initial insights …

This thesis is focused on understanding the correct method to simulate atomistic models to calculate coefficient of diffusion of water through the membrane. It also aims to fix the method previously used in molecular modelling in which the simulation results did not match the experimental results. These membranes will be used in air dehumidification systems. The four types of membranes namely, polyurethane, polyurethane with silica nano particles, polyurethane with silica nano particles and amine surface modifier, and polyurethane with silica nano particles and aniline surface modifier. These membranes were also simulated to understand the effects of temperatures and pressure using molecular dynamics. The software packages used are MAPS 4.3, Avogadro, EMC, OVITO, and LAMMPS. MAPS, Avogadro and EMC were used to model the membrane at an atomistic level while LAMMPS is used to simulate the model generated. OVITO is used to analyze the simulation visually. The movement of water vapor molecules were tracked through the membrane in the simulation and diffusion coefficient was calculated using Mean square displacement equation. To create a realistic model, silica was dispersed in the Polyurethane matrix, simulated under standard atmospheric conditions. These results will help in further optimizing the membrane for air dehumidification. This will …

Although the capability of computational fluid dynamics (CFD) in modeling ship hydrodynamics is well explored in many studies, they still have two main limitations. First, those studies ignore the effect of non-uniform shear current which exists in realistic situation. Second, the focus of most studies was laid more on the seakeeping/maneuvering performance and less attention was paid to survivability of ships due to extreme ship response events in waves, which are considered rare events but influential. In this thesis, we explore the capability of CFD in those two areas. In the first part of the thesis, the hydrodynamic performance of KCS in the presence of a non-uniform shear current is investigated for the first time using high-fidelity CFD simulations. Various shear current conditions with different directions were considered and results were compared with the ones with no shear current. The second part of the thesis focuses on study of rare events of ship responses by development of extreme response conditioning techniques to design the wave trail. Two conditioned techniques based on Gaussian and non-Gaussian processes are considered.

In this thesis, friction stir channeling (FSC) and its process parameters influence on geometry, surface quality and productivity are explored. The probe of the friction stir processing (FSP) tool used to perform these tests was a modified submerged bobbin tool made of MP 159 Co-Ni alloy. The body was made from H13 tool steel. To find the optimal channel conditions for a targeted range of process parameters, multiple 6061 aluminum samples were prepared with a U shape guide to test the effects of different spindle speeds and feed rates. Using a gantry-type computer numerical control (CNC) friction stir welding (FSW) machine, the aluminum coupons were subjected to calibration experiments, force control tests, and an increased production rate to test these effects. It was found through experimentation that the programmed feed rates, spindle speeds and forces produced by the machine had an impact on the channel geometry. It was determined from the force-controlled setup that 8.46 mm/s at 750 RPM was the best combination of results for the four conditions tested on a CNC friction stir processing-machine. It was then tested at 10.58 mm/s at 800 RPM, which had comparable results with the best combination of input parameters from the force-controlled …

This thesis details the creation and application of a generalized process plan for the hybrid manufacturing of AISI 316L stainless steel, using direct energy deposition (DED) and ball-nose end-mill machining, that includes the inspection and measurement of objects created by that hybrid manufacturing process plan. The proposed process plan progresses through the selection of substrate thickness, single-track, multi-track, and multi-layer depositions, then on to machining processing. A manufacturers' recommended set and range of DED parameters were used to create a designed experiment that aided in the analysis of objects created in each of the DED process planning steps; those objects were then machined in the same enclosure using a set of machining parameters screened from industry recommendations for ball-nose milling of stainless steel, after which measurements were taken for surface roughness, some material characteristics, and for tool deterioration. The results, analyses, and discussions collected herein show that the proposed process plan can provide models for geometrical outputs for each step in the plan, some improvements in substrate stability, surface roughness, tool deterioration, and material porosity due to voids. Current research in hybrid manufacturing does not show generalized process planning influences. The process plan as demonstrated by the work in this …