A modified, single error-correcting, and double error detecting Hamming code, hereafter referred to as modified SEC-DED Hamming code, is proposed in this research. The code requires fewer logic gates to implement than the SEC-DED Hamming code. Also, unlike the popular Hsiao's code, the proposed code can determine the error in the received word from its syndrome location in the parity check matrix. A detailed analysis of the area and power utilization by the encoder and decoder circuits of the modified SEC-DED Hamming code is also discussed. Results demonstrate that this code is an excellent alternative to Hsiao's code as the area and power values are very similar. In addition, the ability to locate the error in the received word from its syndrome is also of particular interest. Primitive polynomials play a crucial role in the hardware realizations for error-correcting codes. This research describes an implementation of a scalable primitive polynomial circuit with coefficients in GF(2). The standard cell area and power values for various degrees of the circuit are analyzed. The physical design of a degree 6 primitive polynomial computation circuit is also provided. In addition to the codes, a background of the already existing SPX GCD computation algorithm is …

The key requirements of a reliable neural signal recording system include low power to support long-term monitoring, low noise, minimum tissue damage, and wireless transmission. The neural spikes are also detected and sorted on-chip/off-chip to implement closed-loop neuromodulation in a high channel count setup. All these features together constitute an empirical neural recording system for neuroscience research. In this prospectus, we propose to develop a neural signal acquisition system with wireless transmission and feature extraction. We start by designing a prototype entirely built with commercial-off-the-shelf components, which includes recording and wireless transmission of synthetic neural data and feature extraction. We then conduct the CMOS implementation of the low-power multi-channel neural signal recording read-out circuit, which enables the in-vivo recording with a small form factor. Another direction of this thesis is to design a self-powered motion tracking read-out circuit for wearable sensors. As the wearable industry continues to advance, the need for self-powered medical devices is growing significantly. In this line of research, we propose a self-powered motion sensor based on reverse electrowetting-on-dielectric (REWOD) with low-power integrated electronics for remotely monitoring health conditions. We design the low-power read-out circuit for a wide range of input charges, which is generated from the …

Occupancy monitoring is an important research problem with a broad range of applications in security, surveillance, and resource management in smart building environments. As a result, it has immediate solutions to solving some of society's most pressing issues. For example, HVAC and lighting systems in the US consume approximately 45-50% of the total energy a building uses. Smart buildings can reduce wasted energy by incorporating networkable occupancy sensors to obtain real-time occupancy data for the facilities. Therefore, occupancy monitoring systems can enable significant cost savings and carbon reduction. In addition, workplaces have quickly adapted and implemented COVID-19 safety measures by preventing overcrowding using real-time information on people density. While there are many sensors, RGB cameras have proven to be the most accurate. However, cameras create privacy concerns. Hence, our research aims to design an efficient occupancy monitoring system with minimal privacy invasion. We conducted a systematic study on sensor characterization using various low-resolution infrared sensors and proposed a unified processing algorithms pipeline for occupancy estimation. This research also investigates low-resolution thermal imaging sensors with a chessboard reading pattern, focusing on algorithm design issues and proposing solutions when detecting moving objects. Our proposed approach achieves about 99% accuracy in occupancy estimation, …

This dissertation is particularly focused on a novel approach of a wirelessly powered neuromodulation system for chronic patients. The inductively coupled transmitter (TX) and receiver (RX) coils are designed through optimization to achieve maximum efficiency. A power management unit (PMU) consisting of a voltage rectifier, voltage regulator along with a stimulation circuitry is also designed to provide pulse stimulation to genetically modified neurons. For continuous health monitoring purposes, the response from the brain due to stimulation needs to be recorded and transmitted wirelessly outside the brain for analysis. A low-power high-data duty-cycled impulse-radio ultra-wideband (IR-UWB) transmitter is designed and implemented using the standard CMOS process. Another focus of this dissertation is the design of a reverse electrowetting-on-dielectric (REWOD) based energy harvesting circuit for wearable sensor applications which is capable of generating a very low-frequency signal from motion activity such a walking, running, jogging, etc. A commercial off-the-shelf (COTS) based and on-chip based energy harvesting circuit is designed for very low-frequency signals. The experimental results show promising progress towards the advancement in the wirelessly powered neuromodulation system and building the self-powered wearable sensor.

The feedback control system is defined as the sampling of an output signal and feeding it back to the input, resulting in an error signal that drives the overall system. This dissertation focuses on the stabilization and performance of state feedback control systems. Chapters 3 and 4 focus on the feedback control protocol approaching in the multi-agents system. In particular, the global regulation of distributed optimization problems has been considered. Firstly, we propose a distributed optimization algorithm based on the proportional-integral control strategy and the exponential convergence rate has been delivered. Moreover, a decentralized mechanism has been equipped to the proposed optimization algorithm, which enables an arbitrarily chosen agent in the system can compute the value of the optimal solution by only using the successive local states. After this, we consider the cost function follows the restricted secant inequality. A dynamic event-triggered mechanism design has been proposed. By ensuring the global regulation of the distributed proportional-integral optimization algorithm, the dynamic event-triggered mechanism efficiently reduces the communication frequency among agents. Chapter 5 focuses on the feedback control protocol approaching the single-agent system. Specifically, we investigate the truncated predictor feedback control of the regulation of linear input-delayed systems. For the purpose of …

Networked multi-agent systems have attracted lots of researchers to develop algorithms, techniques, and applications.A multi-agent networked system consists of more than one subsystem (agent) to cooperately solve a global problem with only local computations and communications in a fully distributed manner. These networked systems have been investigated in various different areas including signal processing, control system, and machine learning. We can see massive applications using networked systems in reality, for example, persistent surveillance, healthcare, factory manufacturing, data mining, machine learning, power system, transportation system, and many other areas. Considering the nature of those mentioned applications, traditional centralized control and optimization algorithms which require both higher communication and computational capacities are not suitable. Additionally, compared to distributed control and optimization approaches, centralized control, and optimization algorithms cannot be scaled into systems with a large number of agents, or guarantee performance and security. All of the limitations of centralized control and optimization algorithms motivate us to investigate and develop new distributed control and optimization algorithms in networked systems. Moreover, convergence rate and analysis are crucial in control and optimization literature, which motivates us to investigate how to analyze and accerlate the convergence of distributed optimization algorithms.

The survival rate for a suddent cardiac arrest (SCA) is incredibly low, with less than one in ten surviving; most SCAs occur outside of a hospital setting. There is a need to develop an effective and efficient system that can sense, communicate and remediate potential SCA situations on a near real-time basis. This research presents a novel Zeolite-PDMS-based optically unobtrusive flexible dry electrodes for biosignal acquisition from various subjects while at rest and in motion. Two zeolite crystals (4A and 13X) are used to fabricate the electrodes. Three different sizes and two different filler concentrations are compared to identify the better performing electrode suited for electrocardiogram (ECG) data acquisition. A low-power, low-noise amplifier with chopper modulation is designed and implemented using the standard 180nm CMOS process. A commercial off-the-shelf (COTS) based wireless system is designed for transmitting ECG signals. Further, this dissertation provides a framework for Machine Learning Classification algorithms on large, open-source Arrhythmia and SCA datasets. Supervised models with features as the input data and deep learning models with raw ECG as input are compared using different methods. The machine learning tool classifies the datasets within a few minutes, saving time and effort for the physicians. The experimental results …