Article studying the influence of microwave signals of different shapes on the magnetoacoustic wave system with a giant nonlinearity in canted antiferromagnet FeBO₃ at room temperature, which is close to its phase transition to the paramagnetic state. Results represent the first observation of the macroscopic quantum statistical phenomenon, Bose-Einstein condensation of magnetoacoustic wave quanta in a wave system with a high level of thermal fluctuations.

This article assembles large, pediatric-sized stents (Ø10 - Ø20 mm) from poly(L-lactide) fibers (DH-BDS) at two thicknesses, 250 µm and 300 µm. DH-BDS exhibiting hoop strength similar to metal stents and demonstrating minimal degradation and strength loss over the first year before completely disappearing within 3 to 4.5 years show promise as a pediatric interventional alternative to current strategies.

Article on the implementation of liquid exfoliation to inkjet-print two-dimensional (2D) black phosphorous (BP) and molybdenum disulfide (MoS₂) p–n heterojunctions on a standard indium tin oxide (ITO) glass substrate in a vertical architecture. The authors also compared the optical and electrical properties of the inkjet-printed BP layer with that of the MoS₂ and the electrical properties of the mechanically exfoliated MoS₂ with that of the inkjet-printed MoS₂.

This article uses PCL to blend into PBHV. Both unfoamed and foamed blends are examined. The results provide a pathway to multifunctional performance in foams of high performance biopolymers such as PBHV through harnessing the CO₂ miscibility of PCL.

Data management plan for the grant, "CAREER: Manufacturing of Mechanically Stable Nanoporous Ceramic Structures Via Selective Infiltration of Polymer Templates." This Faculty Early Career Development (CAREER) grant from the National Science Foundation supports fundamental research to elucidate a new strategy of manufacturing nanoporous ceramic structures with controllable structure and composition and programmable mechanical stability. The specific goal of this research is to discover processing-structure-property relationships in ceramic coatings and heterostructures by providing fundamental insights on the mechanism of liquid phase swelling-based infiltration of spin-coated polymer templates with inorganic precursors and defining the rules that control the resulting structure and, thus, access to various materials surfaces and interfaces.

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

This article combines machine learning (ML), finite element analysis (FEA), and empirical experiments to develop data-driven models that characterize interfacial mechanical properties precisely. It also provides a code package containing trained ML models, allowing other researchers to establish T–S relations for different material interfaces.

Data management plan for the grant "Charge Transport in Two-Dimensional Materials Based Integrated Flexible Energy System."

Article exploring friction stir alloying (FSA) to tune the microstructure and a composition of a TWIP high-entropy alloy by adding Ti, and thus activating site-specific deformation mechanisms that occur concomitantly in a single alloy. This approach presents a novel microstructural architecture to design alloys, an approach that combines and optimizes local compositions such that multiple deformation mechanisms can be activated to enhance engineering properties.

This article studies the corrosion and corrosion fatigue characteristics of LPBF 316L stainless steels (SS) in 3.5 wt.% NaCl solution using an electrochemical method, high cycle fatigue, and fatigue crack propagation testing.

This article identifies a bulk texture effect on elastic anisotropy in laser powder bed fused Ti6Al4V by employing an effective bulk modulus elastography technique coupled with ultrasound shear wave velocity measurement at a frequency of 20 MHz inside the material.

This article highlights that design of Al alloys for laser-powder bed fusion (L-PBF) can lead to fundamental change in the microstructure evolution, proposed alloy design strategies lead to synergy between and printability and performance, hierarchical and heterogeneous microstructures have potential to overcome the strength-ductility tradeoff, and alloy design incorporating the specific attributes of an AM technology is crucial to maximizing its potential.

Article examining Aluminium alloy 5083 subjected to Laser Shock Peening both with (LSP) and without protective coating (LPwC) at multiple pulse densities. A second LPwC treatment was conducted fully submersed under water, in addition to the standard laminar water flow condition. Results show that compressive residual stresses were generated in all cases, although their character varied depending on the peening strategy and method of confinement.

Article applies Laser Shock Peening with (LSP) and without protective coating (LPwC) to sensitized AA5083 followed by electrochemical analysis.

This article uses iron oxide/alumina heterostructures formed by two-step infiltration of polystyrene-block-polyvinyl pyridine block copolymer with iron and aluminum precursors from the solution and vapor-phases, respectively, to show that the phase and morphology of iron oxide nanoparticles dramatically depend on the approach used to remove the polymer. The article extends the boundaries of structure manipulations in multicomponent heterostructures synthesized using polymer infiltration synthesis and their properties.

Data management plan for the research project "Enabling Multi-scale Modeling by Deciphering Fundamental Mechanisms Underlying Phase Stability, Deformation and Oxidation in Refractory Complex Concentrated Alloys (RCCAs) and Intermetallics."

This article varies the surface anchoring strength and achieves a uniform lying helical structure with long-range order as thermodynamically stable state without any external support in Chiral nematic liquid crystals (CLCs).

Erratum to “From mechanics to thermodynamics: A relation between the brittleness and the thermal expansivity for polymers” that provides the Declaration of Interest statement that was missed to be included in the original publication.

Article on the poor mechanical properties of Ti alloys. The study shows that the elastic properties of the ω-phase can be systematically varied as a function of its composition to enhance both the ductility and strength of the Ti-alloy. Furthermore, that ω precipitates are not intrinsically embrittling and detrimental and that Ti-alloys can be created with both good ductility and strength by tailoring ω precipitates' composition instead of completely eliminating them.

This article aims to determine the nucleation and growth mechanisms of PbSO4 nanoparticles in various solutions to potentially reduce or control the buildup of PbSO4 on battery electrodes over time.

This article is a review that categorizes the compositional and microstructural approaches that exhibit potential for a combination of shear induced phase transformation and twinning, thereby expanding beyond the slip based mechanisms.

Article studying material response under dynamic short duration-high temperature oxidation.

Article on the ion-exchange and associated interfacial reaction mechanisms of silicate glasses. This work reports findings that shed light on the complex ion-exchange mechanisms during glass hydration and enables more detailed understanding of the corrosion and glass-water interactions of silicate glasses which has the potential to impact both science and technology.

Article reporting the high-temperature superlubricity phenomenon accomplished in coatings produced by burnishing powders of antimony trioxide (Sb₂O₃) and magnesium silicate hydroxide coated with carbon (MSH/C) onto the nickel superalloy substrate.