Computational methods were employed to investigate catalytic processes. First, DFT calculations predicted the important geometry metrics of a copper–nitrene complex. MCSCF calculations supported the open-shell singlet state as the ground state of a monomeric copper nitrene, which was consistent with the diamagnetic character deduced from experimental observations. The calculations predicted an elusive terminal copper nitrene intermediate. Second, DFT methods were carried out to investigate the mechanism of C–F bond activation by a low-coordinate cobalt(I) complex. The computational models suggested that oxidative addition, which is very rare for 3d metals, was preferred. A π–adduct of PhF was predicted to be a plausible intermediate via calculations. Third, DFT calculations were performed to study ancillary ligand effects on C(sp3)–N bond forming reductive elimination from alkylpalladium(II) amido complexes with different phosphine supporting ligands. The dimerization study of alkylpalladium(II) amido complexes indicated an unique arrangement of dative and covalent Pd-N bonds within the core four-membered ring of bimetallic complexes. In conclusion, computational methods enrich the arsenal of methods available to study catalytic processes in conjunction with experiments.

There is a consistent need in many industries, especially oil and gas, to develop coatings which have higher corrosion resistance and better hardness to extend the lifetime of equipment when it is exposed to hostile environments. Electrodeposition has been a favorable method in the synthesis of metal coatings because of its low cost, convenience, ability to work at low temperatures, and ability to control surface morphology and structure. The inclusion of ceramic nanoparticles in metal matrix composites has previously been investigated as a technique to not only increase the corrosion resistance of the native metal but also to improve the hardness and mechanical properties. Cerium oxide nanoparticles were modified through the grafting of organic groups with increasing hydrophobicity for use in nickel coatings on stainless steel to further improve the corrosion properties while maintaining the hardness of the nanocomposite coatings. The process of modifying the cerium oxide nanoparticles involved the use of aryl diazonium salts and resulted in multilayers forming on the surface of the nanoparticles. Praseodymium oxide nanoparticles were also investigated as additives to nickel coatings, since praseodymium oxide has not yet been studied as a possible corrosion protection enhancement in coatings. These coatings were evaluated for composition and …

Porphyrins offer a very synthetically flexible template which can be modified in numerous ways to synthesize molecules with very useful properties applicable in areas such as non-linear optical properties, photodynamic therapy, dye-sensitized solar cells, chemical sensors and organic electronic devices. β-Substituted π-extended porphyrins offer unique capabilities in tuning the properties of the molecule towards practical applications. Increased π-conjugation allows the HOMO-LUMO gap to decrease and hence to redshift the absorption into the near-IR region. β-Fused benzoporphyrins offer additional benefits in which the benzene ring itself can be further modified using electron donating substituents and electron donating substituents to electronically tune these porphyrins for various uses. The goal of the research pursued in this dissertation was to develop new methods for the development of β-Substituted π-extended porphyrins and to study their optical and electronic properties. To accomplish this goal, we developed new method to synthesize A2B2 type tetrabenzoporphyrins and we studied the electron transfer in such systems. We also studied the effectiveness of such systems in dye sensitized solar cells. A new method to synthesize functionalized naphthalene fused porphyrins was also developed and we were also able to use this method to synthesize a push-pull naphthalene fused porphyrin.

This dissertation focuses on the development, characterization, and analysis of luminescent materials and coatings for sensing applications, including CO2, heavy metals, and silver. Chapter 2 involves the use of a gold(I) pyrazolate trimer that is able to detect silver ions with an AgNP medium. Detection of silver is vital, because there is an influx of silver into our environment caused by the increased use of AgNP. Therefore, having a sensor that is able to differentiate between and detect only Ag ions is an important first step to solving the toxicity mystery of AgNPs. Chapter 3 focuses on the development of sensor coatings containing a Eu(III) based luminescent system for sensing dissolved CO2 without the aid of an absorption-based dye. It is well-known that monitoring CO2 levels in our environment is important since even at low concentrations it can cause adverse health effects to the human body. This work demonstrates a pH-sensitive Eu complex being used directly as a CO2 sensor without the aid of any other absorption-based dye. Chapter 4 explores the idea of developing a heavy metal sensor for lead and its ability to detect lead in wide concentration range upon changing the pH of the medium and the …

This work discusses the C-H bond activation by transition metal complexes using various computational methods. First, we performed a DFT study of oxidative addition of methane to Ta(OC2H4)3A (where A may act as an ancillary ligand) to understand how A may affect the propensity of the complex to undergo oxidative addition. Among the A groups studied, they can be a Lewis acid (B or Al), a saturated, electron-precise moiety (CH or SiH), a σ-donor (N), or a σ-donor/π-acid (P). By varying A, we seek to understand how changing the electronic properties of A can affect the kinetics and thermodynamics of methane C–H activation by these complexes. For all A, the TS with H trans to A is favored kinetically over TS with CH3 trans to A. Upon moving from electron-deficient to electron-rich moieties (P and N), the computed C–H activation barrier for the kinetic product decreases significantly. Thus, changing A greatly influences the barrier for methane C–H oxidative addition by these complexes. Secondly, a computational study of oxidative addition (OA) of methane to M(OC2H4)3A (M = Ta, Re and A = ancillary ligand) was carried out using various computational methods. The purpose of this study was to understand how variation …

This work involves synthesis and characterization of isotropic and anisotropic noble metal nanoparticles for applications ranging from antimicrobial uses to anticancer applications. These nanomaterials are stabilized in genuinely benign biomaterials ranging from polymers to cross linked proteins for targeted cancer treatments. The nanoparticles are found to have tunable optical properties.

Corrosion is one of the most expensive failures in industries that used metal components and other construction materials. In fact, corrosion is responsible for hundreds of billions-dollar loss in the US alone each year. In general, corrosion occurs when metal surfaces are exposed to water, oxygen, acids, bases, or salts. Therefore, metal substrates must be protected by using materials that act as barriers to avoid destructive corrosion attack. Aluminum is one of the most common metals used in the industry; and it is used in many places such as refining and petroleum production equipment, pipelines, and fossil fuel power plants. Aluminum is known to have corrosion resistance due to the forming of an oxide layer that can be reformed rapidly if the surface gets damaged. However, in the long-term the oxide layer cannot protect the aluminum surface from corrosion because it is stable only in neutral mediums and it is soluble in acidic and basic environments. Barrier protection is one of the most effective methods that prevent aluminum surfaces from being exposed to corrosive environments. These barriers can be organic or inorganic coatings that can limit the electron transport or the cathodic and the anodic reactions between aluminum alloys and …

Photophysical properties of an array of various polyaromatic hydrocarbons were benchmarked with B3LYP, M06 and B97D methods coupled with Pople and CEP-31G(d) basis sets. Results from the benchmark show the importance of diffuse basis sets when modeling the electronic properties of highly conjugated systems and provide qualitative reliable accuracy with certain levels of theory. B97D and M06 are applied to modeling pyrene adducts governed by non-covalent interactions in both gaseous and condensed states to reproduce experimental spectra. DFT calculations with both B97D and M06 functionals show qualitatively and quantitatively that pyrene dimer is a stronger π–base as compared to its monomer. Binding energies coupled with MEP, PCA and Qzz results show that the difference in π-basicity of the monomer and dimer impacts the supramolecular chemistry involved in adducts formed with super π-acidic silver cyclometallic trimer (CTC). Non-covalent interactions between coinage metal CTCs and ammonia/phosphine substrates is reported. Interactions between these substrates and the facial plane of the π-rich gold CTC reveal a novel interaction, where the typical Lewis acid/base roles are reversed for the substrates. Adducts formed through this type of interaction define typical Lewis bases like ammonia and phosphine as Lewis acids, wherein the partially positive hydrogens coordinate to …

This dissertation focuses on the computational investigation of gold(I) acyclic diaminocarbene (ADC) complexes and their application in homogeneous gold(I) catalysis. Chapter 2 is an in-depth computational investigation of the σ- and π-bonding interactions that make up the gold-carbene bond. Due to the inherent conformation flexibility of ADC ligands, distortions of the carbene plane can arise that disrupt orbital overlap between the lone pairs on the adjacent nitrogen atoms and the empty p-orbital of the carbene. This study investigated the affect these distortions have on the strength of the σ- and π-bonding interactions. This investigation demonstrated that while these distortions can affect the σ- and π-bonding interactions, the ADC ligand have to become highly distorted before any significant change in energy of either the σ- or π-bonding interactions occurs. Chapter 3 is a collaborative investigation between experimental and computational methods, DFT calculations were employed to support the experimental catalytic results and determine the role that steric effects have in controlling the regioselectivity of a long-standing electronically controlled gold(I)-catalyzed tandem 1,6-enyne cyclization/hydroarylation reaction with indole. This study demonstrated that by sterically hindering nucleophilic attack of indole at the favored position, nucleophilic attack would occur at a secondary position leading to the selective …

Over the last 20 years, there has occurred an increase in the number, scope, and impact of nanomaterials projects. By leveraging the Surface Plasmon Resonance of metallic nanoparticles for labelling, sensing, and treatment, researchers have demonstrated the versatile utility of these nanomaterials in medicine. The literature provides evidence of use of simple, well-known chemistry for nanomaterials synthesis when the focus is new applications of nanomaterials. A case in point, is the synthesis of metallic nanoparticles, whereby HAuCl4, CuCl2, Cu(acac)2, and AgNO3 are typically employed as nanoparticle precursors. Unfortunately, the use of these precursors limits the number of applications available to these materials - particularly for AuNPs in medicine, where the byproducts of nanoparticle synthesis (most often surface-adsorbed reductants, toxic stabilizers, and growth directors) cause nanoparticles to fail clinical trials. Despite the several thousand publications detailing the advancements in nanoparticle therapeutics, as of 2017, there were only 50 FDA-approved nanoparticle formulations. Less than 10 were based on metallic nanoparticles. This is a problem because many of these nanoparticle therapeutics demonstrate potent cell killing ability and labeling of cells. A solution to this problem may be the use of weakly coordinated, monovalent metal complexes, which require only one electron to reduce them …

Gas hydrate formation and corrosion can cause serious safety and flow assurance problems in subsea environments. One aspect that has been given less attention is the corrosion behavior of materials in gas hydrate formation environment (GHFE). This work introduces a new technique/method for corrosion testing of materials exposed to low temperatures GHFEs. This technique allows pH monitoring, and control of test conditions like temperature. In this work, GHFE is defined as an environment that includes water, methanol and its degraded products in the presence of corrosive agents like CO2 and chloride salt at gas hydrate formation temperatures (GHFT). After 20 hrs immersion in CO2-saturated salinity environment at GHFT, as-deposited Ni-Mo alloy coating has the highest corrosion resistance of 33.28 kΩ cm2. The corrosion resistance dropped to 14.36 kΩ cm2 and 11.11 kΩ cm2 in the sweet low-salinity and sweet high-salinity test solutions respectively. The combined results of SEM/EDX showed that the Ni-Mo coating oxide layer broke down quicker in sweet high-salinity environment than sweet low-salinity environment. When carbon steel was immersed in a CO2-saturated high salinity environment at GHFT, there was slight overall change in corrosion rate (CR) as salt concentration increase from 3 wt% to 25 wt%. In degraded …

Corrosion is an unstoppable process that occurs spontaneously in many areas of industry, specially, oil and gas industries. Therefore, the need of developing protective coating to lower the cost of corrosion is very consistent. Among different methods, electrodeposition has been a popular method since it offer many advantages such as low cost, ability to control the surface and thickness of the coating, ability to perform at low temperature and pressure, and very convenience. Ceramic nanoparticles have been widely incorporated into metal coating and used as a protective layer to improve both corrosion and hardness properties. Diazonium synthesis was used to modify cerium oxide nanoparticles by grafting with ferrocene for use in nickel nanocomposite coating. Citric acid and citrate salt were used as stabilizing ligands for yttrium oxide and praseodymium oxide nanoparticles in nickel plating solution to prevent the formation of hydroxide, thus, higher amount of nanoparticles was able to incorporate into nanocomposite coatings. These fabricated coatings were evaluate for the corrosion and mechanical properties using many different instruments and electrochemical techniques. As modified cerium oxide, stabilized yttrium oxide or praseodymium oxide added into nickel coatings. The results showed an increase in hardness and corrosion resistance leading to the overall improvement …