Resource Type
Partner
Degree Department
Materials Science and Engineering
19
Computer Science and Engineering
11
Electrical Engineering
7
Mechanical and Energy Engineering
5
Biomedical Engineering
4
Engineering Technology
4
PACCAR Technology Institute
4
Center for Advanced Research and Technology
2
Jim McNatt Institute for Logistics Research
2
Physics
2
3 More
46 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
46
next
Simultaneous Direct Holographic Fabrication of Photonic Cavity and Graded Photonic Lattice With Dual Periodicity, Dual Basis, and Dual Symmetry
This article demonstrates the digital, holographic fabrication of graded, super-basis photonic lattices with dual periodicity, dual basis, and dual symmetry.
Date:
June 15, 2017
Creator:
Lowell, David; Lutkenhaus, Jeffrey; George, David; Philipose, Usha; Chen, Banglin & Lin, Yuankun
Object Type:
Article
System:
The UNT Digital Library
Synthesis of uniform single layer tungsten disulfides for tunable photoluminescence
This article explores single-layer tungsten disulfides (WS₂) because of their unique tunable bandgap. The authors report the scalable synthesis of uniform single-layer WS2 film by a two-step chemical vapor deposition (CVD) method followed by a laser thinning process.
Date:
November 23, 2017
Creator:
Park, Juhong; Kim, Min Su; Cha, Eunho; Kim, Jeongyong & Choi, Wonbong
Object Type:
Article
System:
The UNT Digital Library
Enhancing elevated temperature strength of copper containing aluminum alloys by forming L1₂ Al₃Zr precipitates and nucleating θ" precipitates on them
This article presents a new approach in designing an Al-based alloy through solid state precipitation route.
Date:
March 16, 2017
Creator:
Makineni, S. K.; Sugathan, Sandeep; Meher, Subhashish; Kumar, Subodh & Chattopadhyay, K.
Object Type:
Article
System:
The UNT Digital Library
An experimental design to study decommitment in a collaborative multi-agent system in a scheduling domain
This article describes the theoretical background and experimental design of new research based on previous multi-agent research on collaborative agents. The research extends the concept of agent decommitment into a resource scheduling domain. The problem is no longer time constrained, however, the number of agents is increased dramatically. The actual experimentation is yet to be performed. The authors state that results of the experimentation will be reported in a future article.
Date:
October 4, 2017
Creator:
Van Dyne, Michele & Tsatsoulis, Costas
Object Type:
Article
System:
The UNT Digital Library
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
This article presents the development of wood flour (WF)-filled polylactic acid (PLA) composite filaments for a fused deposition modeling (FDM) process with the aim of application to 3D printing.
Date:
March 24, 2017
Creator:
Tao, Yubo; Wang, Honglei; Li, Zelong; Li, Peng & Shi, Sheldon Q.
Object Type:
Article
System:
The UNT Digital Library
Metabolic Syndrome, Inflammation, and Cancer
Article introducing a special issue discussing the link between the metabolic syndrome and the development and progression of cancer. The role of inflammation in these diseases and identification of new therapeutic targets are of great significance. This special issue contributes original research papers and review articles that motivate the continuous efforts to comprehend the mechanisms, production, and management related to cancers associated with the metabolic syndrome.
Date:
July 6, 2017
Creator:
Wu, Yong; Dong, Yunzhou; Duan, Shengzhong; Zhu, Donghui & Deng, Lin
Object Type:
Article
System:
The UNT Digital Library
Corrigendum to “Metabolic Syndrome, Inflammation, and Cancer”
Corrigendum to the article titled “Metabolic Syndrome, Inflammation, and Cancer”.
Date:
December 21, 2017
Creator:
Wu, Yong; Dong, Yunzhou; Duan, Shengzhong; Zhu, Donghui & Deng, Lin
Object Type:
Article
System:
The UNT Digital Library
Recent Development of Two-Dimensional Transition Metal Dichalcogenides and Their Applications
This article reviews the recent progress in 2D materials beyond graphene and includes mainly transition metal dichalcogenides.
Date:
January 9, 2017
Creator:
Choi, Wonbong; Choudhary, Nitin; Han, Gang Hee; Park, Juhong; Akinwande, Deji & Lee, Young Hee
Object Type:
Article
System:
The UNT Digital Library
Permeability Study of Austenitic Stainless Steel Surfaces Produced by Selective Laser Melting
In this article, permeability properties and surface roughness of stainless steel (SS316L) surfaces were evaluated through experimentation with three different laser scanning patterns (chessboard, meander, and stripe), and different sloping angles between the fabricated surface and the laser beam incident on the process. Results showed that for each scanning pattern, the roughness decreased as the sloping angle increased consistently in all experimental trials.
Date:
November 24, 2017
Creator:
Segura-Cardenas, Emmanuel; Ramírez-Cedillo, Erick; Sandoval-Robles, Jesús Alejandro; Ruiz-Huerta, Leopoldo; Caballero-Ruiz, Alberto & Siller Carrillo, Héctor Rafael
Object Type:
Article
System:
The UNT Digital Library
Effect of Ni-Content on the Transformation Temperatures in NiTi-20 at. % Zr High Temperature Shape Memory Alloys
This article investigates the effect of Ni-content on phase transformation behavior of NiTi-20 at. % Zr high temperature shape memory alloy.
Date:
October 18, 2017
Creator:
Carl, Matthew; Smith, Jesse D.; Van Doren, Brian & Young, Marcus L.
Object Type:
Article
System:
The UNT Digital Library
Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging
This article demonstrates that low-temperature aging (LTA) treatments for short time periods can in fact enhance the yield strength while preserving substantial elongation-to-failure in ω containing β titanium alloys.
Date:
July 13, 2017
Creator:
Sun, F.; Zhang, J.Y.; Vermaut, P.; Choudhuri, Deep; Alam, Talukder; Mantri, Srinivas Aditya et al.
Object Type:
Article
System:
The UNT Digital Library
Rapid Fabrication of Disposable Micromixing Arrays Using Xurography and Laser Ablation
This article presents a novel split-and-recombine (SAR) array design adapted for interfacing standardized dispensing (handheld micropipette) and sampling (microplate reader) equipment.
Date:
February 28, 2017
Creator:
Martínez-López, J. Israel; Betancourt, H. A.; García-López, Erika; Rodríguez, Ciro A. & Siller Carrillo, Héctor Rafael
Object Type:
Article
System:
The UNT Digital Library
Experimental Study of Back Wall Dross and Surface Roughness in Fiber Laser Microcutting of 316L Miniature Tubes
This article uses extensive experimentation to evaluate the effect of fiber laser micro-cutting parameters over average surface roughness and back wall dross in AISI 316L stainless steel mixture tubes.
Date:
December 26, 2017
Creator:
García-López, Erika; Medrano-Tellez, Alexis G.; Ibarra-Medina, Juansethi R.; Siller Carrillo, Héctor Rafael & Rodríguez, Ciro A.
Object Type:
Article
System:
The UNT Digital Library
Technology Development of Glycosyl Resins for Wood Composites
This article reviews synthesis methods for renewable and eco-friendly glycosyl adhesives.
Date:
September 15, 2017
Creator:
Gan, Wei-Xing; Yang, Hai-Bing; Zhang, Yi-Fu; Zhang, Yi-Fu & Shi, Sheldon Q.
Object Type:
Article
System:
The UNT Digital Library
Effect of Cr Addition on γ-γ' Cobalt-Based Co-Mo-Al-Ta Class of Superalloys: A Combined Experimental and Computational Study
This article deals with effect of Cr addition (10 at.%) on the partitioning behavior and the consequent effect on mechanical properties for tungsten-free γ-γ' cobalt-based superalloys with base alloy compositions of Co–30Ni–10Al–5Mo–2Ta (2Ta) and Co–30Ni–10Al–5Mo–2Ta–2Ti (2Ta2Ti).
Date:
June 12, 2017
Creator:
Nithin, B.; Samanta, A.; Makineni, S. K.; Alam, Talukder; Pandey, P.; Singh, Abhishek K. et al.
Object Type:
Article
System:
The UNT Digital Library
Out of School and into STEM: Supporting Girls of Color Through Culturally Relevant Enrichment
This article explains how teachers can adapt traditional STEM enrichment activities to support girls of color through culturally relevant institutional practices.
Date:
2017
Creator:
Young, Jemimah L.; Young, Jamaal & Paufler, Noelle A.
Object Type:
Article
System:
The UNT Digital Library
Inkjet printing of liquid-exfoliated, highly conducting graphene/poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) nanosheets for organic electronics
In this article, highly dispersive graphene inks are demonstrated by liquid-phase exfoliation of the bulk graphite crystal in the solvent N-methyl-2-pyrrolidone (NMP).
Date:
May 4, 2017
Creator:
Desai, Jay A.; Biswas, Chandan & Kaul, Anupama
Object Type:
Article
System:
The UNT Digital Library
Investigation of structural morphology and electrical properties of graphene-C₆₀ hybrids
This article reports on the electrophoretic deposition of C₆₀ on graphene. The results suggest that graphene based C₆₀ structures are attractive as flexible transparent electrodes and are excellent electron accepting/charge transport materials for the construction of efficient photovoltaic devices.
Date:
May 2, 2017
Creator:
Chugh, Srishti; Biswas, Chandan; Echegoyen, Luis & Kaul, Anupama
Object Type:
Article
System:
The UNT Digital Library
Polydimethylsiloxane and polyisoprene-based graphene composites for strain-sensing
In this article, different composite materials have been developed and characterized for different applications in the health science field and as optoelectromechanical sensors.
Date:
March 31, 2017
Creator:
Catalan Gonzalez, Jorge Alfredo & Kaul, Anupama
Object Type:
Article
System:
The UNT Digital Library
Multi-Objective Response to Co-Resident Attacks in Cloud Environment
This article introduces a novel multi-objective attack response system.
Date:
September 17, 2017
Creator:
Abazari, Farzaneh; Analoui, Morteza & Takabi, Hassan
Object Type:
Article
System:
The UNT Digital Library
Modelling HIV Intervention among Most-at-Risk/Key Population: Case Study of FWSS in Nigeria
This article discusses a novel risk equation for estimating new infections among Females who Sell Sex (FWSS), their clients, and communities.
Date:
September 28, 2017
Creator:
Akwafuo, Sampson; Shattock, Andrew & Mikler, Armin R.
Object Type:
Article
System:
The UNT Digital Library
Additive Manufacturing of Metals: A Brief Review of the Characteristic Microstructures and Properties of Steels, Ti-6al-4v and High-Entropy Alloys
This article presents a brief review of the microstructures and mechanical properties of selected metallic alloys processed by additive manufacturing (AM).
Date:
March 30, 2017
Creator:
Gorsse, Stéphane; Hutchinson, Christopher; Gouné, Mohamed & Banerjee, Rajarshi
Object Type:
Article
System:
The UNT Digital Library
Molecular Dynamic Simulation of Nanocrystal Formation and Tensile Deformation of TiAl Alloy
This article provides fundamental understanding of the nanocrystalline formation of undercooling TiAl melt and the deformation mechanisms in the nanocrystalline TiAl at the atomic scale.
Date:
September 8, 2017
Creator:
Li, Peng-tao; Yang, Yanqing; Xia, Zhenhai; Luo, Xian; Jin, Na; Gao, Yong et al.
Object Type:
Article
System:
The UNT Digital Library
Interfacial Properties of Bamboo Fiber-Reinforced High-Density Polyethylene Composites by Different Methods for Adding Nano Calcium Carbonate
This article describes a study observing the effect of nano calcium carbonate (CaCO₃) modification methods on bamboo fiber (BF) used in BF-reinforced high-density polyethylene composites manufactured by extrusion molding.
Date:
October 11, 2017
Creator:
Wang, Cuicui; Xian, Yu; Smith, Lee M.; Wang, Ge; Cheng, Haitao & Zhang, Shuangbao
Object Type:
Article
System:
The UNT Digital Library