This report discusses the effects of the possible entry of Japan to the Trans-Pacific Partnership (TPP) negotiations. The TPP issue presents both risks and opportunities for the United States and Japan. On the one hand, it could reinvigorate an economic relationship that has remained steady but stagnant, by forcing the two countries to address long-standing, difficult issues, and allowing them to raise their relationship to a higher level. On the other hand, failure to do so could indicate that the underlying problems are too fundamental to overcome and could set back the relationship.

This document represents a proposed outline for conducting a Before and After Study of the DART Green Line, a major extension of DART's light rail transit (LRT) system. Such studies track the costs and impacts of the extension of Red Line service into the North Central Corridor and analyze the accuracy of forecasts made during project planning. As the Green Line initially began as two separate planning corridors, the Northwest Corridor and the Southeast Corridor, this planned study replaced original planned studies of the two corridors.

This work is motivated by the growing demand for auxiliary heating on small and large machines worldwide. Numerous present and planned RF experiments (EBW, Lower Hybrid, ICRF, and ECH) are increasingly complex systems. The operational challenges are indicative of a need for components of real-time control that can be implemented with a moderate amount of effort in a time- and cost-effective fashion. Such a system will improve experimental efficiency, enhance experimental quality, and expedite technological advancements. The modular architecture of this control-suite serves multiple purposes. It facilitates construction on various scales from single to multiple controller systems. It enables expandability of control from basic to complex via the addition of modules with varying functionalities. It simplifies the control implementation process by reducing layers of software and electronic development. While conceived with fusion applications in mind, this suite has the potential to serve a broad range of scientific and industrial applications. During the Phase-I research effort we established the overall feasibility of this modular control-suite concept. We developed the fundamental modules needed to implement open-loop active-control and demonstrated their use on a microwave power deposition experiment.

This report discusses World Trade Organization (WTO) safeguards provisions contained in Article XIX of the General Agreement on Tariffs and Trade (GATT) and the Agreement on Safeguards; the WTO China-specific safeguard and how it differs from preexisting WTO provisions; authorities and procedures set out in Section 421 of the Trade Act of 1974; the International Trade Commission (ITC) determination and the President's decision to provide relief in the 2009 China tires case; and China's WTO case against the U.S. tire safeguard.

This report provides Congress with official, unclassified, background data from U.S. government sources on transfers of conventional arms to developing nations by major suppliers for the period 2004 through 2011. All agreement and delivery data in this report for the United States are government-to-government Foreign Military Sales (FMS) transactions. Similar data are provided on worldwide conventional arms transfers by all suppliers, but the principal focus is the level of arms transfers by major weapons suppliers to nations in the developing world.

None

Report that provides information on the levels of deficit reduction if the Budget Control Act's (BCA) automatic cuts are implemented as under current law and contrasts that with the alternative proposals offered by some Members of Congress and President Obama. It also discusses specific determinations made by the Office of Management and Budget regarding the exempt/non-exempt status of certain programs, as well as a discussion of information to be disclosed regarding the FY2013 BCA sequester impact.

As the amount of electricity generated by renewable energy sources continues to increase, the current method of power transmission will not serve as an adequate method for transmitting power over very long distances. A new method for transmitting power is proposed using particle beams in a storage ring. Particle beams offer an incredibly energy efficient alternative to transmission lines in transmitting power over very long distances. A thorough investigation of the magnet lattice design for this storage ring is presented. The design demonstrates the ability to design a ring with stable orbits over a 381.733 km circumference. Double bend achromats and FODO cells are implemented to achieve appropriate {beta} functions and dispersion functions for 9-11 GeV electron beams.

The current method for measuring profiles of proton bunches in accelerators is severely lacking. One must dedicate a great deal of time and expensive equipment to achieve meaningful results. A new method to complete this task uses a rotating mask with slots of three different orientations to collect this data. By scanning over the beam in three different directions, a complete profile for each bunch is built in just seconds, compared to the hours necessary for the previous method. This design was successfully tested using synchrotron radiation emitted by SPEAR3. The profile of the beam was measured in each of the three desired directions. Due to scheduled beam maintenance, only one set of data was completed and more are necessary to solve any remaining issues. The data collected was processed and all of the RMS sizes along the major and minor axes, as well as the tilt of the beam ellipse were measured.

When is a dark matter halo 'relaxed'? In our efforts to understand the structure of the universe, dark matter simulations have provided essential grounds for theoretical predictions. These simulations provide a wealth of ways of parameterizing and measuring the features of astronomical objects. It is these measurements on which we base comparisons of our world and our attempts to re-create it. One of the essential questions dark matter simulations help address is how dark matter halos evolve. How does one characterize different states of that evolution? The focus of this project is identifying cluster relaxedness and how it relates to the internal structure of the halo. A dark matter simulation consists of an N-body simulation which takes an initial set of positions and velocities of the dark matter particles and evolves them under the influence of gravity [6]. Though scientists have so far not been able to detect dark matter particles, the information from these simulations is still valuable especially given the relationship between dark matter halos and galaxy clusters. Galaxies sit within dark matter halos and recent evidence points to filaments of dark matter forming the framework on which galaxy clusters grow [7]. A dark matter halo is a …

The redshift of a galaxy can be determined by one of two methods; photometric or spectroscopic. Photometric is a term for any redshift determination made using the magnitudes of light in different filters. Spectroscopic redshifts are determined by measuring the absorption spectra of the object then determining the difference in wavelength between the 'standard' absorption lines and the measured ones, making it the most accurate of the two methods. The data for this research was collected from SDSS DR8 and then separated into blended and non-blended galaxy sets; the definition of 'blended' is discussed in the Introduction section. The current SDSS photometric redshift determination method does not discriminate between blended and non-blended data when it determines the photometric redshift of a given galaxy. The focus of this research was to utilize machine learning techniques to determine if a considerably more accurate photometric redshift determination method could be found, for the case of the blended and non-blended data being treated separately. The results show a reduction of 0.00496 in the RMS error of photometric redshift determinations for blended galaxies and a more significant reduction of 0.00827 for non-blended galaxies, illustrated in Table 2.

Thin film applications are of great interest to the semiconductor industry due to the important role they play in cutting edge technology such as thin film solar cells. X-Ray Reflectivity (XRR) characterizes thin films in a non-destructive and efficient manner yet complications exist in extracting these characteristics from raw XRR data. This study developed and tested two different algorithms to extract quantity of layers and thickness information on the nanometer scale from XRR data. It was concluded that an algorithm involving a local averaging technique revealed this information clearly in Fourier space.

This report contains tables that provide names and contact information for CRS experts on major issues associated with hydraulic fracturing and unconventional oil and gas resource development.

The Southern Regional Center for Lightweight Innovative Design (SRCLID) has developed an experimentally validated cradle-to-grave modeling and simulation effort to optimize automotive components in order to decrease weight and cost, yet increase performance and safety in crash scenarios. In summary, the three major objectives of this project are accomplished: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantify microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios. In this final report, we divided the content into two parts: the first part contains the development of building blocks for the project, including materials and process models, process-structure-property (PSP) relationship, and experimental validation capabilities; the second part presents the demonstration task for Mg front-end work associated with USAMP projects.