A letter report issued by the Government Accountability Office with an abstract that begins "Between 1981 and 2010, the time it took the Department of Labor’s Occupational Safety and Health Administration (OSHA) to develop and issue safety and health standards ranged widely, from 15 months to 19 years, and averaged more than 7 years. Experts and agency officials cited increased procedural requirements, shifting priorities, and a rigorous standard of judicial review as contributing to lengthy time frames for developing and issuing standards. For example, they said that a shift in OSHA’s priorities toward one standard took attention away from several other standards that previously had been a priority."

A letter report issued by the Government Accountability Office with an abstract that begins "Under criteria for evaluating a tax credit design, both the performance-based and cost-based credits have advantages and disadvantages with neither design being unambiguously the better option based on current information. Both a cost-based and a performance-based credit are designed to reduce energy use and CO2 emissions by providing incentives for energy conservation investment. However, they differ in their relative effectiveness and costs. In general, a performance-based credit is more likely to effectively reduce energy use and CO2 emissions because it rewards energy savings from the investment rather than the cost-based credit’s rewarding of spending regardless of whether this spending results in energy savings. However, the performance-based credit may have significant up-front costs for energy audits, not required by the cost-based credit, which could reduce its effectiveness by discouraging investment. In addition, for taxpayers who do invest, these up-front costs may mean that a performance-based credit may have significantly higher taxpayer compliance and IRS administrative costs than a cost-based credit. A credit’s fairness depends on subjective judgments of how a credit varies with a taxpayer’s income level."

Secondary Ion Mass Spectrometry (SIMS) is used for elemental and isotopic analysis of solid samples. The greatest strength of SIMS is the ability to analyze very small areas (as small as 50 nm using the CAMECA NanoSIMS, for example) and to generate high-spatial resolution maps of the distribution of elements and isotopes within the sample. The measurement of the isotopic composition of sample is usually straightforward, only requiring the analysis of the sample and that of an isotopic reference material for determination of the mass bias of the instrument. Quantification of elements, however, involves the analysis of matrix matched standards for the determination of the relative sensitivity factor (a function of both the element to be analyzed and the matrix). SIMS is commonly used in nuclear forensics for exploring the heterogeneity of the material on fine spatial scale.

Developing a sophisticated theory to understand the electronic structure of 5f-metals is a great challenge to solid state physics. Complicated electronic structures of 5f-metals make their properties strongly sensitive to small energy changes produced by the addition of a small amount of alloy, impurities, or crystal structure defects caused by irradiation. A theoretical material science technique applicable to investigate these effects is atomistic simulation using Classical Molecular Dynamics (CMD). In contrast to ab initio techniques, CMD may include several million particles, so that there is a possibility of direct simulation of very low concentration impurities and defects (as well as phenomena such as plasticity and polymorphous transitions) under given conditions. The goal is to develop theoretical models to understand and predict changes in materials properties of actinides caused by self-irradiation.

The aim of our proposal is to apply interface engineering approach to improve charge extraction, guide active layer morphology, improve materials compatibility, and ultimately allow the fabrication of high efficiency tandem cells. Specifically, we aim at developing: i. Interfacial engineering using small molecule self-assembled monolayers ii. Nanostructure engineering in OPVs using polymer brushes iii. Development of efficient light harvesting and high mobility materials for OPVs iv. Physical characterization of the nanostructured systems using electrostatic force microscopy, and conducting atomic force microscopy v. All-solution processed organic-based tandem cells using interfacial engineering to optimize the recombination layer currents vi. Theoretical modeling of charge transport in the active semiconducting layer The material development effort is guided by advanced computer modeling and surface/ interface engineering tools to allow us to obtain better understanding of the effect of electrode modifications on OPV performance for the investigation of more elaborate device structures. The materials and devices developed within this program represent a major conceptual advancement using an integrated approach combining rational molecular design, material, interface, process, and device engineering to achieve solar cells with high efficiency, stability, and the potential to be used for large-area roll-to-roll printing. This may create significant impact in lowering manufacturing cost …

A series of tests were performed to examine the sorption of stable Sr versus the sorption of {sup 85}Sr by monosodium titanate (MST) and modified monosodium titanate (mMST) from simulated waste solutions. Earlier testing indicated a discrepancy between the decontamination factors (DFs) obtained by measuring the stable Sr concentrations by inductively coupled plasma - mass spectroscopy (ICP-MS) and the {sup 85}Sr activities by gamma spectroscopy. One hypothesis to explain this discrepancy was that the stable Sr and {sup 85}Sr were in different chemical forms in the simulated solutions. Several simulants were prepared using different methods for adding the Sr and performance tests were carried out using MST and mMST to determine the Sr and {sup 85}Sr DFs with the various simulants. Testing indicated no discrepancy between the Sr and {sup 85}Sr DFs in tests with these simulants.

This thesis presents a two-grid algorithm based on Smoothed Aggregation Spectral Element Agglomeration Algebraic Multigrid (SA-{rho}AMGe) combined with adaptation. The aim is to build an efficient solver for the linear systems arising from discretization of second-order elliptic partial differential equations (PDEs) with stochastic coefficients. Examples include PDEs that model subsurface flow with random permeability field. During a Markov Chain Monte Carlo (MCMC) simulation process, that draws PDE coefficient samples from a certain distribution, the PDE coefficients change, hence the resulting linear systems to be solved change. At every such step the system (discretized PDE) needs to be solved and the computed solution used to evaluate some functional(s) of interest that then determine if the coefficient sample is acceptable or not. The MCMC process is hence computationally intensive and requires the solvers used to be efficient and fast. This fact that at every step of MCMC the resulting linear system changes, makes an already existing solver built for the old problem perhaps not as efficient for the problem corresponding to the new sampled coefficient. This motivates the main goal of our study, namely, to adapt an already existing solver to handle the problem (with changed coefficient) with the objective to achieve …

In this project, we focused on applications of the new warm-rain and ice microphysics schemes to simulate various cloud systems. The overall goal was either to evaluate and improve specific aspects of the schemes (through comparisons with ARM/ASR observations) or to understand the coupling between aerosols, cloud microphysics and cloud dynamics in variety of situations. These studies are relevant to the indirect impact of atmospheric aerosols on climate. Below we report on selected key aspects of the research and then list all peer-reviewed papers that acknowledge support from this grant. Overall, studies partially supported by this grant resulted in 30 peer-reviewed publications (listed below), several dozens of conference presentations (including posters and oral presentations at the ASR Science Team Meetings), and two PhD dissertations. More detailed summaries of our accomplishments are included in yearly reports. Here we summarize only major efforts.

In our study, a series of lab-scale crucible tests were performed on designed glasses of different compositions to further investigate and simulate the effect of Cr, Ni, Fe, Al, Li, and RuO2 on the accumulation rate of spinel crystals in the glass discharge riser of the HLW melter. The experimental data were used to expand the compositional region covered by an empirical model developed previously (Matyáš et al. 2010b), improving its predictive performance. We also investigated the mechanism for agglomeration of particles and impact of agglomerates on accumulation rate. In addition, the TL was measured as a function of temperature and composition.

As supercomputers become larger and more powerful, they are growing increasingly complex. This is reflected both in the exponentially increasing numbers of components in HPC systems (LLNL is currently installing the 1.6 million core Sequoia system) as well as the wide variety of software and hardware components that a typical system includes. At this scale it becomes infeasible to make each component sufficiently reliable to prevent regular faults somewhere in the system or to account for all possible cross-component interactions. The resulting faults and instability cause HPC applications to crash, perform sub-optimally or even produce erroneous results. As supercomputers continue to approach Exascale performance and full system reliability becomes prohibitively expensive, we will require novel techniques to bridge the gap between the lower reliability provided by hardware systems and users unchanging need for consistent performance and reliable results. Previous research on HPC system reliability has developed various techniques for tolerating and detecting various types of faults. However, these techniques have seen very limited real applicability because of our poor understanding of how real systems are affected by complex faults such as soft fault-induced bit flips or performance degradations. Prior work on such techniques has had very limited practical utility because …

None

The report discusses the Food Security Act of 1985 that included a number of significant conservation provisions designed to reduce production and conserve soil and water resources. It points out Conservation Compliance Today and Issues for the Next Farm Bill.

This report provides background information and oversight issues for Congress on the Virginia class nuclear-powered attack submarine (SSN) program. The two Virginia-class boats requested for procurement in FY2013 are the final two in a group of eight covered by a multiyear procurement (MYP) arrangement for the period FY2009-FY2013. Issues for Congress include whether or not to approve the MYP arrangement request, whether to restore procurement of a second Virginia-class boat in FY2014, and the Virginia-class procurement rate in general.

This report discusses the continuing conservatorship of Fannie Mae and Freddie Mac at a time of uncertainty in the housing, mortgage, and financial markets has raised doubts about the future of these enterprises, which are chartered by Congress as government-sponsored enterprises (GSEs) and whose debts are widely believed to be implicitly guaranteed by the federal government.

When civil unrest, violence, or natural disasters erupt in spots around the world, concerns arise over the safety of foreign nationals residing in the United States who are from these troubled places. Provisions exist in the Immigration and Nationality Act (INA) to offer temporary protected status (TPS) or relief from removal under specified circumstances. A foreign national who is granted TPS receives a registration document and an employment authorization for the duration of TPS. The United States currently provides TPS or deferred enforced departure (DED) to over 300,000 foreign nationals from a total of eight countries: El Salvador, Haiti, Honduras, Nicaragua, Somalia, Sudan, and most recently Southern Sudan and Syria.

A criminal prosecution involving classified information may cause tension between the government's interest in protecting classified information and the criminal defendant's right to a constitutionally valid trial. In some cases, a defendant may threaten to disclose classified information in an effort to gain leverage. Concerns about this practice, referred to as "graymail," led the 96th Congress to enact the Classified Information Procedures Act to provide uniform procedures for prosecutions involving classified information.

The massive Tohoku earthquake and tsunami of March 11, 2011, caused extensive damage in northeastern Japan, including damage to the Fukushima Dai-ichi nuclear power installation, which resulted in the release of radiation. Concerns arose about the potential effects of this released radiation on the U.S. marine environment and resources.

This report provides brief descriptions of the budget volumes and related documents, together with Internet addresses, Government Printing Office (GPO) stock numbers, and prices for obtaining print copies of these publications. It also explains how to find the locations of government depository libraries, which can provide both printed copies for reference use and Internet access to the online versions.

This report looks at the history, purpose, and current status of the Strategic Petroleum Reserve.