Dark matter charged under a new gauge sector, as motivated by recent data, suggests a rich GeV-scale 'dark sector' weakly coupled to the Standard Model by gauge kinetic mixing. The new gauge bosons can decay to Standard Model leptons, but this mode is suppressed if decays into lighter 'dark sector' particles are kinematically allowed. These particles in turn typically have macroscopic decay lifetimes that are constrained by two classes of experiments, which we discuss. Lifetimes of 10 cm {approx}< c{tau} {approx}< 10{sup 8} cm are constrained by existing terrestrial beam-dump experiments. If, in addition, dark matter captured in the Sun (or Earth) annihilates into these particles, lifetimes up to {approx} 10{sup 15} cm are constrained by solar observations. These bounds span fourteen orders of magnitude in lifetime, but they are not exhaustive. Accordingly, we identify promising new directions for experiments including searches for displaced di-muons in B-factories, studies at high-energy and -intensity proton beam dumps, precision gamma-ray and electronic measurements of the Sun, and milli-charge searches re-analyzed in this new context.

The evaporator recycle streams of nuclear waste tanks may contain waste in a chemistry and temperature regime that exceeds the current corrosion control program, which imposes temperature limits to mitigate caustic stress corrosion cracking (CSCC). A review of the recent service history found that two of these A537 carbon steel tanks were operated in highly concentrated hydroxide solution at high temperature. Visual inspections, experimental testing, and a review of the tank service history have shown that CSCC has occurred in uncooled/un-stress relieved tanks of similar construction. Therefore, it appears that the efficacy of stress relief of welding residual stress is the primary corrosion-limiting mechanism. The objective of this experimental program is to test A537 carbon steel small scale welded U-bend specimens and large welded plates (30.48 x 30.38 x 2.54 cm) in a caustic solution with upper bound chemistry (12 M hydroxide and 1 M each of nitrate, nitrite, and aluminate) and temperature (125 C). These conditions simulate worst-case situations in these nuclear waste tanks. Both as-welded and stress-relieved specimens have been tested. No evidence of stress corrosion cracking was found in the U-bend specimens after 21 days of testing. The large plate test was completed after 12 weeks of …

We present an empirical model that describes the experimentally observed laser-induced bulk damage and conditioning behavior in deuterated Potassium dihydrogen Phosphate (DKDP) crystals in a self-consistent way. The model expands on an existing nanoabsorber precursor model and the multi-step absorption mechanism to include two populations of absorbing defects, one with linear absorption and another with nonlinear absorption. We show that this model connects previously uncorrelated small-beam damage initiation probability data to large-beam damage density measurements over a range of ns pulse widths relevant to ICF lasers such as the National Ignition Facility (NIF). In addition, this work predicts the damage behavior of laser-conditioned DKDP and explains the upper limit to the laser conditioning effect. The ADM model has been successfully used during the commissioning and early operation of the NIF.

The study of the semileptonic B-meson decays is the most accessible and cleanest way to determine the CKM matrix elements |V{sub cb}| and V{sub ub}. These decays also provide experimental access to study the QCD form-factors, heavy quark masses, and HQE parameters. The theoretical description of semileptonic B-meson decays at the parton level is very simple because there is no interaction between leptonic and hadronic currents. At the hadron level one needs to introduce corrections due to the strong interaction between quarks. Especially in the description of the inclusive B-meson decays the motion of the b-quark inside the B-meson plays a crucial role. All these effects are described in the frameworks of Heavy Quark Effective Theory (HQET) and Lattice QCD (LQCD). We give an overview about results of studies of semileptonic B-meson decays collected with the BABAR and Belle detectors at the PEP-II and the KEKB e{sup +}e{sup -}-storage rings. We present recent results on hadronic moments measured in inclusive B {yields} X{sub c}lv and B {yields} X{sub u}lv decays and extracted heavy quark masses m{sub b} and m{sub c} and dominant non-perturbative Heavy Quark Expansion (HQE) parameters. We also report the measurements of the CKM matrix elements |V{sub cb}| …

We review recent experimental measurements of the Fermi surface of the iron-pnictide superconductor LaFePO using quantum oscillation techniques. These studies show that the Fermi surface topology is close to that predicted by first principles density functional theory calculations, consisting of quasi-twodimensional electron-like and hole-like sheets. The total volume of the two hole sheets is almost equal to that of the two electron sheets, and the hole and electron Fermi surface sheets are close to a nesting condition. No evidence for the predicted three dimensional pocket arising from the Fe d{sub z}{sup 2} band is found. Measurements of the effective mass suggest a renormalisation of around two, close to the value for the overall band renormalisation found in recent angle resolved photoemission measurements.

After several years of planning and workshop meetings, a decision was reached in late 2008 to organize PICMG xTCA for Physics Technical Subcommittees to extend the ATCA and MTCA telecom standards for enhanced system performance, availability and interoperability for physics controls and applications hardware and software. Since formation in May-June 2009, the Hardware Technical Subcommittee has developed a number of ATCA, ARTM, AMC, MTCA and RTM extensions to be completed in mid-to-late 2010. The Software Technical Subcommittee is developing guidelines to promote interoperability of modules designed by industry and laboratories, in particular focusing on middleware and generic application interfaces such as Standard Process Model, Standard Device Model and Standard Hardware API. The paper describes the prototype design work completed by the lab-industry partners to date, the timeline for hardware releases to PICMG for approval, and the status of the software guidelines roadmap. The paper also briefly summarizes the program of the 4th xTCA for Physics Workshop immediately preceding the RT2010 Conference. he case for developing ATCA and MicroTCA (xTCA) specification extensions for physics has been covered in several previous papers. Briefly, ATCA and MicroTCA is the first all-serial communication platform available to the physics community to support both massively complex …

The PEP-II B-Factory collider ended the final phase of operation at nearly twice the design current and 4X the design luminosity. To highlight the evolution from the original conceptual design through to the 1.2E34 final machine we choose one example each from the broadband feedback and from the LLRF system. They illustrate the original design estimation missed some very significant details, and how in the course of PEP-II operation unexpected difficulties led to significant insights and new approaches which allowed higher machine performance. We present valuable 'lessons learned' which are of interest to designers of next generation feedback and impedance controlled LLRF systems.

We study a simple model of a black hole in AdS and obtain a holographic description of the region inside the horizon. A key role is played by the dynamics of the scalar fields in the dual gauge theory. This leads to a proposal for a dual description of D-branes falling through the horizon of any AdS black hole. The proposal uses a field-dependent time reparameterization in the field theory. We relate this reparametrization to various gauge invariances of the theory. Finally, we speculate on information loss and the black hole singularity in this context.

I will review the latest developments in determining the CP-violating phases of the CKM matrix elements from measurements by the BaBar and BELLE experiments at the high-luminosity B factories (PEP-II and KEKB). The emphasis will be on the angle {gamma}/{phi}{sub 3} of the Unitarity Triangle, which is the relative phase arg(-V{sub ud}V*{sub ub}/V{sub cd}V*{sub cb}), or the CP-violating phase of the b {yields} u transition in the commonly used Wolfenstein convention.

We explore for the first time the possibilities to measure an intermediate-mass (m{sub H} = 115-140 GeV/c{sup 2}) Standard-Model Higgs boson in electromagnetic proton-lead (p Pb) interactions at the CERN Large Hadron Collider (LHC) via its b{bar b} decay. Using equivalent Weizsacker-Williams photon fluxes and Higgs effective field theory for the coupling {gamma}{gamma} {yields} H, we obtain a leading-order cross section of the order of 0.3 pb for exclusive Higgs production in elastic (p Pb {yields} {gamma}{gamma} p H Pb) and semielastic (p Pb {yields} {gamma}{gamma} X H Pb) processes at {radical}S{sub NN} = 8.8 TeV. After applying various kinematics cuts to remove the main backgrounds ({gamma}{gamma} {yields} b{bar b} and misidentified {gamma}{gamma} {yields} q{bar q} events), we find that a Higgs boson with m{sub H} = 120 GeV/c{sup 2} could be observed in the b{bar b} channel with a 3{sigma}-significance integrating 300 pb{sup -1} with an upgraded pA luminosity of 10{sup 31} cm{sup -2}s{sup -1}. We also provide for the first time semielastic Higgs cross sections, along with elastic t{bar t} cross sections, for electromagnetic pp, pA and AA collisions at the LHC.

The novel crab waist collision scheme under test at the DA{Phi}NE Frascati {Phi}-factory finds its natural application to the SuperB project, the asymmetric e{sup +}e{sup -} flavour factory at very high luminosity with relatively low beam currents and reduced backgrounds. The SuperB accelerator design requires a careful choice of beam parameters to reach a good trade-off between different effects. We present here simulation results for the Touschek backgrounds and lifetime obtained for both the low and high energy rings for different machine designs. A first set of horizontal collimators has been studied to stop Touschek particles. A study of the distributions of the Touschek particle losses at the interaction region into the detectors for further investigations is underway.

Recent experimental results indicate that the dark matter sector may have a non-minimal structure with a spectrum of states and interactions. Inelastic scattering has received particular attention in light of DAMA's annual modulation signal. Composite inelastic dark matter (CiDM) provides a dynamical origin for the mass splittings in inelastic dark matter models. We show that higher dimensional operators in the CiDM Lagrangian lead to an admixture of inelastic and elastic scattering in the presence of parity violation. This scenario is consistent with direct detection experiments, even when parity violation is nearly maximal. We present an effective field theory description of such models and discuss the constraints from direct detection experiments. The CiDM model with parity violation has non-trivial phenomenology because of the multiple scattering channels that are allowed.

The Standard Model (SM) is one of the most tested and verified physical theories of all time, present experimental observations are consistent with SM expectations. On the other hand SM can not explain many physical observations: the cosmological observations possibly infer the presence of dark matter which is clearly beyond the SM expectations; the SM Higgs model, while explaining the generation of fermion masses, can not explain the hierarchy problem and a non natural fine tuning of SM is needed to cancel out quadratic divergences in the Higgs boson mass. New physics (NP) beyond SM should hence be investigated: rising the energy above NP processes thresholds, and detecting new particles or new effects not predicted by the standard model directly, is one of the possible approaches; another approach is to make precision measurements of well known processes or looking for rare processes which involve higher order contribution from NP processes, this approach need higher luminosities with respect to the previous approach but lower beam energies. Search for Lepton Flavor Violation (LFV) in charged lepton decays is promising: neutrino physics provides indeed a clear and unambiguous evidence of LFV in the neutral lepton sector via mixing processes, which have been observed …

We initiate a holographic model building approach to 'strange metallic' phenomenology. Our model couples a neutral Lifshitz-invariant quantum critical theory, dual to a bulk gravitational background, to a finite density of gapped probe charge carriers, dually described by D-branes. In the physical regime of temperature much lower than the charge density and gap, we exhibit anomalous scalings of the temperature and frequency dependent conductivity. Choosing the dynamical critical exponent z appropriately we can match the non-Fermi liquid scalings, such as linear resistivity, observed in strange metal regimes. As part of our investigation we outline three distinct string theory realizations of Lifshitz geometries: from F theory, from polarized branes, and from a gravitating charged Fermi gas. We also identify general features of renormalization group flow in Lifshitz theories, such as the appearance of relevant charge-charge interactions when z {ge} 2. We outline a program to extend this model building approach to other anomalous observables of interest such as the Hall conductivity.

Crab cavities are proposed for the LHC upgrade to improve the luminosity. There are two possible crab cavity installations for the LHC upgrade: the global scheme at Interaction Region (IR) 4 where the beam-beam separation is about 420-mm, and the local scheme at the IR5 where the beam-beam separation is only 194-mm. One of the design requirements as the result of a recent LHC-Crab cavity workshop is to develop a 400-MHz cavity design that can be utilized for either the global or local schemes at IR4 or IR5. Such a design would offer more flexibility for the final upgrade installation, as the final crabbing scheme is yet to be determined, and save R&amp;D cost. The cavity size of such a design, however, is limited by the beam-beam separation at IR5 which can only accommodate a cavity with a horizontal size of about 145-mm, which is a design challenge for a 400-MHz cavity. To meet the new design requirements, we have developed a compact 400-MHz half-wave spoke resonator (HWSR) crab cavity that can fit into the tight spaces available at either IR4 or IR5. In this paper, we present the optimization of the HWSR cavity shape and the design of HOM, …

Blending, or mixing, processes in 1.3 million gallon nuclear waste tanks are complicated by the fact that miles of serpentine, vertical, cooling coils are installed in the tanks. As a step toward investigating blending interference due to coils in this type of tank, a 1/10.85 scale tank and pump model were constructed for pilot scale testing. A series of tests were performed in this scaled tank by adding blue dye to visualize blending, and by adding acid or base tracers to solution to quantify the time required to effectively blend the tank contents. The acid and base tests were monitored with pH probes, which were located in the pilot scale tank to ensure that representative samples were obtained. Using the probes, the hydronium ion concentration [H{sup +}] was measured to ensure that a uniform concentration was obtained throughout the tank. As a result of pilot scale testing, a significantly improved understanding of mixing, or blending, in nuclear waste tanks has been achieved. Evaluation of test data showed that cooling coils in the waste tank model increased pilot scale blending times by 200% in the recommended operating range, compared to previous theoretical estimates of a 10-50% increase. Below the planned operating …

We have recently completed a detailed scan of the 19-dimensional parameter space of the phenomenological MSSM, i.e., the CP-conserving MSSM [Minimal Supersymmtric Standard Model] assuming Minimal Flavor Violation (MFV) with the first two sfermion generations degenerate. We found a large set of parameter space points that satisfied all of the existing experimental and theoretical constraints. This analysis allows us to examine the general features of the MSSM without reference to any particular SUSY breaking scenario or any other assumptions about physics at higher scales. This study opens up new possibilities for SUSY phenomenology both at colliders and in astrophysical observations.

The Phase II upgrade to the LHC collimation system calls for complementing the 30 high robust Phase I graphite secondary collimators with 30 high Z Phase II collimators. The Phase II collimators must be robust in various operating conditions and accident scenarios. This paper reports on the final construction and testing of the prototype collimator to be installed in the SPS (Super Proton Synchrotron) at CERN. Bench-top measurements will demonstrate that the device is fully operational and has the mechanical and vacuum characteristics acceptable for installation in the SPS.

We report quantum oscillation measurements that enable the direct observation of the Fermi surface of the low temperature ground state of BaFe{sub 2}As{sub 2}. From these measurements we characterize the low energy excitations, revealing that the Fermi surface is reconstructed in the antiferromagnetic state, but leaving itinerant electrons in its wake. The present measurements are consistent with a conventional band folding picture of the antiferromagnetic ground state, placing important limits on the topology and size of the Fermi surface.

A hollow core photonic bandgap (PBG) lattice in a dielectric fiber can provide high gradient acceleration in the optical regime, where the accelerating mode resulting from a defect in the PBG fiber can be excited by high-power lasers. Efficient methods of coupling laser power into the PBG fiber are an area of active research. In this paper, we develop a simulation method using the parallel finite-element electromagnetic suite ACE3P to study the propagation of the accelerating mode in the PBG fiber and determine the radiation pattern into free space at the end of the PBG fiber. The far-field radiation will be calculated and the mechanism of coupling power from an experimental laser setup will be discussed.

This article classifies Little Higgs models that have collective quartic couplings. There are two classes of collective quartics: Special Cosets and Special Quartics. After taking into account dangerous singlets, the smallest Special Coset models are SU(5)/SO(5) and SU(6)/Sp(6). The smallest Special Quartic model is SU(5)/SU(3) x SU(2) x U(1) and has not previously been considered as a candidate Little Higgs model.

The high energy component of the TeV blazar Markarian 421 has been extensively studied since the beginning of the 90s, when the source was first detected at gamma-rays with EGRET and the Whipple Telescope, yet the source is still far from being understood. The high sensitivity, large dynamic range, and excellent time coverage of the Fermi Large Area Telescope (LAT), all representing significant advances over previous gamma-ray observations, will play a key role in the elucidation of the physical processes underlying the high energy emission of this blazar. In this presentation we show the results from almost 6 months (4 August 2008 to 20 January 2009) of observation with LAT. We report significant flux/spectral variability on a range of time scales from weeks to days, and an energy spectrum from 0.1 GeV to 300 GeV, overlapping with the energy ranges covered by the current generation of Cherenkov Telescopes. Results on the observations of the BLLac object Markarian 421 collected in the first months of operation of the Fermi satellite have been presented. Light curves on weekly and daily timescales have been shown, as well as the results of the spectral analysis in the energy range between 100 MeV and 300 …

Suzanne Tegen's presentation about U.S. wind energy manufacturing (presented at WINDPOWER 2010 in Dallas) provides information about challenges to modeling renewables; wind energy's economic "ripple effect"; case studies about wind-related manufacturing in Colorado, Iowa, Ohio, and Indiana; manufacturing maps for the Great Lakes region, Arkansas, and the United States; sample job announcements; and U.S. Treasury Grant 1603 funding.

The LHC Low Level RF system (LLRF) is a complex multi-loop system used to regulate the superconductive cavity gap voltage as well as to reduce the impedance presented by RF stations to the beam. The RF system can have a profound impact on the stability of the beam; a mis-configured RF system has the potential of causing longitudinal instabilities, beam diffusion and beam loss. To configure the RF station for operation, a set of parameters in the LLRF multi-loop system have to be defined. Initial system commissioning as well as ongoing operation requires a consistent method of computer based remote measurement and model-based design of each RF station feedback system. This paper describes the suite of Matlab tools used for configuring the LHC RF system during the start up in Nov2009-Feb2010. We present a brief overview of the tool, examples of commissioning results, and basics of the model-based design algorithms. This work complements our previous presentation, where the algorithms and methodology followed in the tools were described.