A letter report issued by the Government Accountability Office with an abstract that begins "Improvised explosive devices (IED) have been and continue to be a significant threat to U.S. forces. The Department of Defense (DOD) expanded efforts to defeat IEDs with the establishment of the Joint Improvised Explosive Device Defeat Organization (JIEDDO) in January 2006. GAO was asked to review JIEDDO's management and operations. For this second report in its series, GAO determined (1) the extent to which JIEDDO's management processes provide adequate assurances that its financial information is accurate and provides transparency over its operations and (2) the extent to which JIEDDO identifies, records, tracks, and reports numbers of all personnel, including contractors. GAO analyzed data for the first half of fiscal year 2007, which included 47 funding transactions totaling $1.34 billion for 24 initiatives to address these objectives."

A letter report issued by the Government Accountability Office with an abstract that begins "In January 2007 the President announced an initiative, referred to as Grow the Force, to increase the end strength in the Army by more than 74,000 by 2013 and the Marine Corps by 27,000 personnel by 2011 to enhance U.S. forces, reduce stress on deployable personnel, and provide necessary forces for success in the Global War on Terrorism. The Department of Defense (DOD) estimates that it will need more than $17 billion for facilities to accommodate the planned personnel increases. GAO was asked to review (1) the process the Army and Marine Corps used to develop construction projects associated with Grow the Force, (2) the extent to which the projects submitted in DOD's budget requests for fiscal years 2007 and 2008 support the initiative, and (3) whether the Army and Marine Corps plan to use temporary facilities while construction projects are completed. GAO reviewed the construction projects associated with Grow the Force in DOD's budget requests for fiscal years 2007 and 2008, reviewed stationing documents, and interviewed officials at Army and Marine Corps headquarters and six installations on the process used to develop projects. In comments …

A letter report issued by the Government Accountability Office with an abstract that begins "Surface transportation programs need to be reexamined in the context of the nation's current unsustainable fiscal path. Surface transportation programs are particularly ready for review as the Highway Trust Fund faces a fiscal imbalance at a time when both congestion and travel demand are growing. As you requested, this report (1) provides an overview of the federal role in surface transportation and the goals and structures of federal programs, (2) summarizes GAO's conclusions about the structure and performance of these programs, and (3) provides principles to assess options for focusing future surface transportation programs. GAO's study is based on prior GAO reports, stakeholder reports and interviews, Department of Transportation documents, and the views of transportation experts."

A letter report issued by the Government Accountability Office with an abstract that begins "The Immigration and Nationality Act requires that most visitors and immigrants to the United States obtain a visa. Aliens unable to obtain a visa, and with a compelling humanitarian need, may apply to the Department of Homeland Security (DHS) to be granted humanitarian parole. This permits an alien to enter the United States on a temporary basis. Parole responsibility rests with DHS's Humanitarian Assistance Branch (HAB), which was transferred to the U.S. Citizenship and Immigration Services (USCIS) in August 2007. In response to congressional requesters, GAO examined (1) the characteristics of those who applied for humanitarian parole since October 1, 2001, and (2) internal controls HAB designed to adjudicate applications along with the extent to which HAB adhered to them. To conduct this work, GAO analyzed HAB documents and data, such as its protocols and database of all parole applications since October 1, 2001; interviewed HAB officials about adjudication processes; and interviewed attorneys who had helped individuals file for parole."

A letter report issued by the Government Accountability Office with an abstract that begins "In September 1999, the government of Colombia announced a strategy, known as "Plan Colombia," to (1) reduce the production of illicit drugs (primarily cocaine) by 50 percent in 6 years and (2) improve security in Colombia by re-claiming control of areas held by illegal armed groups. Since fiscal year 2000, the United States has provided over $6 billion to support Plan Colombia. The Departments of State, Defense, and Justice and the U.S. Agency for International Development (USAID) manage the assistance. GAO examined (1) the progress made toward Plan Colombia's drug reduction and enhanced security objectives, (2) the results of U.S. aid for the military and police, (3) the results of U.S. aid for non-military programs, and (4) the status of efforts to "nationalize" or transfer operations and funding responsibilities for U.S.-supported programs to Colombia."

The objectives of the confirmatory survey activities were to provide independent contractor field data reviews and to generate independent radiological data for use by the Nuclear Regulatory Commission (NRC) in evaluating the adequacy and accuracy of the licensee’s procedures and final status survey (FSS) results.

This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2007. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow'. Engineering's mission is carried out through research and technology. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. The technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice'. This report combines the work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation.

The Upper Skagit Indian Tribe was honored with a grant through the DOE's Tribal Energy Program - Golden Field Office to develop a Strategic Energy Plan for the Tribal Lands.

The concept of this project is to develop a process that improves the kinetics of the hydrous carbonate formation reaction enabling steelmakers to directly remove CO2 from their furnace exhaust gas. It is proposed to bring the furnace exhaust stream containing CO2 in contact with reclaimed steelmaking slag in a reactor that has an environment near the unit activity of water resulting in the production of carbonates. The CO2 emissions from the plant would be reduced by the amount sequestered in the formation of carbonates. The main raw materials for the process are furnace exhaust gases and specially prepared slag.

The Pre-Amplifier Modules (PAMs) are the heart of the National Ignition Facility (NIF), providing most of the energy gain for the most energetic laser in the world. Upon completion, NIF will be the only laboratory in which scientists can examine the fusion processes that occur inside stars, supernovae, and exploding nuclear weapons and that may someday serve as a virtually inexhaustible energy source for electricity. Consider that in a fusion power plant 50 cups of water could provide the energy comparable to 2 tons of coal. Of paramount importance for achieving laser-driven fusion ignition with the least energy input is the synchronous and symmetric compression of the target fuel--a condition known as laser power balance. NIF's 48 PAMs thus must provide energy gain in an exquisitely stable and consistent manner. While building one module that meets performance requirements is challenging enough, our design has already enabled the construction and fielding of 48 PAMs that are stable, uniform, and interchangeable. PAM systems are being tested at the University of Rochester's Laboratory for Laser Energetics, and the Atomic Weapons Enterprise of Great Britain has purchased the PAM power system.

This is the Final Report for LDRD 04-ERD-086, 'Electro-Thermal-Mechanical Simulation Capability'. The accomplishments are well documented in five peer-reviewed publications and six conference presentations and hence will not be detailed here. The purpose of this LDRD was to research and develop numerical algorithms for three-dimensional (3D) Electro-Thermal-Mechanical simulations. LLNL has long been a world leader in the area of computational mechanics, and recently several mechanics codes have become 'multiphysics' codes with the addition of fluid dynamics, heat transfer, and chemistry. However, these multiphysics codes do not incorporate the electromagnetics that is required for a coupled Electro-Thermal-Mechanical (ETM) simulation. There are numerous applications for an ETM simulation capability, such as explosively-driven magnetic flux compressors, electromagnetic launchers, inductive heating and mixing of metals, and MEMS. A robust ETM simulation capability will enable LLNL physicists and engineers to better support current DOE programs, and will prepare LLNL for some very exciting long-term DoD opportunities. We define a coupled Electro-Thermal-Mechanical (ETM) simulation as a simulation that solves, in a self-consistent manner, the equations of electromagnetics (primarily statics and diffusion), heat transfer (primarily conduction), and non-linear mechanics (elastic-plastic deformation, and contact with friction). There is no existing parallel 3D code for simulating ETM systems at …

Two-dimensional fully kinetic simulations are performed using global boundary conditions relevant to model the Magnetic Reconnection Experiment (MRX) [M. Yamada et al., Phys Plasmas 4, 1936 (1997)]. The geometry is scaled in terms of the ion kinetic scales in the experiment, and a reconnection layer is created by reducing the toroidal current in the flux cores in a manner similar to the actual experiment. The ion-scale features in these kinetic simulations are in remarkable agreement with those observed in MRX, including the reconnection inflow rate and quadrupole field structure. In contrast, there are significant discrepancies in the simulated structure of the electron layer that remain unexplained. In particular, the measured thickness of the electron layers is 3�5 times thicker in MRX than in the kinetic simulations. The layer length is highly sensitive to downstream boundary conditions as well as the time over which the simulation is driven. However, for a fixed set of chosen boundary conditions, an extrapolation of the scaling with the ion to electron mass ratio implies that at realistic mass ratio both the length and width will be too small compared to the experiment. This discrepancy implies that the basic electron layer physics may differ significantly between …

None

In September 2005, periodic sampling of groundwater was initiated by the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) in the vicinity of a grain storage facility formerly operated by the CCC/USDA at Centralia, Kansas. The sampling at Centralia is being performed on behalf of the CCC/USDA by Argonne National Laboratory, in accord with a monitoring program approved by the Kansas Department of Health and Environment (KDHE). The objective is to monitor levels of carbon tetrachloride contamination identified in the groundwater at Centralia (Argonne 2003, 2004, 2005a). Under the KDHE-approved monitoring plan (Argonne 2005b), the groundwater is being sampled twice yearly (for a recommended period of two years) for analyses for volatile organic compounds (VOCs), as well as measurement of selected geochemical parameters to aid in the evaluation of possible natural contaminant degradation (reductive dechlorination) processes in the subsurface environment. The sampling is presently conducted in a network of 10 monitoring wells and 6 piezometers (Figure 1.1), at locations approved by the KDHE (Argonne 2006a). The results of groundwater sampling and VOCs analyses in September-October 2005, March 2006, September 2006, March 2007, and September 2007 were documented previously (Argonne 2006a,b, 2007a, 2008). The results have demonstrated the presence …

None

The Head Observation Organizer, HObO, is a computer program that stores and manages measured ground-water levels. HObO was developed to help ground-water modelers compile, manage, and document water-level data needed to calibrate ground-water models. Well-construction and water-level data from the U.S. Geological Survey National Water Database (NWIS) easily can be imported into HObO from the NWIS web site (NWISWeb). The water-level data can be flagged to determine which data will be included in the calibration data set. The utility program HObO_NWISWeb was developed to simplify the down loading of well and water-level data from NWISWeb. An ArcGIS NWISWeb Extension was developed to retrieve site information from NWISWeb. A tutorial is presented showing the basic elements of HObO.

A plasma-based resonant backward Raman amplifier/compressor for high power amplification of short laser pulses might, under ideal conditions, convert as much as 90% of the pump energy to the seed pulse. While the theoretical highest possible efficiency of this scheme has not yet been achieved, larger efficiencies than ever before obtained experimentally (6.4%) are now being reported, and these efficiencies are accompanied by strong pulse compression. Based on these recent extensive experiments, it is now possible to deduce that the experimentally realized efficiency of the amplifier is likely constrained by two factors, namely the pump chirp and the plasma wavebreaking, and that these experimental observations may likely involve favorable compensation between the chirp of the laser and the density variation of the mediating plasma. Several methods for further improvement of the amplifier e�ciency in current experiments are suggested.

This project represented a joint effort between Florida State University (FSU), Rutgers University (RU), and the University of Illinois (U of I). FSU served as the lead institution and Dr. J.E. Kostka was responsible for project coordination, integration, and deliverables. This project was designed to elucidate the microbial ecology and geochemistry of metal reduction in subsurface environments at the U.S. DOE-NABIR Field Research Center at Oak Ridge, Tennessee (ORFRC). Our objectives were to: 1) characterize the dominant iron minerals and related geochemical parameters likely to limit U(VI) speciation, 2) directly quantify reaction rates and pathways of microbial respiration (terminal-electron-accepting) processes which control subsurface sediment chemistry, and 3) identify and enumerate the organisms mediating U(VI) transformation. A total of 31 publications and 47 seminars or meeting presentations were completed under this project. One M.S. thesis (by Nadia North) and a Ph.D. dissertation (by Lainie Petrie-Edwards) were completed at FSU during fall of 2003 and spring of 2005, respectively. Ph.D. students, Denise Akob and Thomas Gihring have continued the student involvement in this research since fall of 2004. All of the above FSU graduate students were heavily involved in the research, as evidenced by their regular attendance at PI meetings and ORFRC …

This scoping study describes the underlying data resources and an analysis tool for a demand response assessment specifically tailored toward the needs of the Modern Grid Initiatives Demonstration Field Test in Phase II in Morgantown, WV. To develop demand response strategies as part of more general distribution automation, automated islanding and feeder reconfiguration schemes, an assessment of the demand response resource potential is required. This report provides the data for the resource assessment for residential customers and describes a tool that allows the analyst to estimate demand response in kW for each hour of the day, by end-use, season, day type (weekday versus weekend) with specific saturation rates of residential appliances valid for the Morgantown, WV area.

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of illness and injury surveillance activities that provide an early warning system to detect health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence, occupational injuries and illnesses, and disabilities and deaths among current workers.

If there is a single word that both characterized 2007 and dominated the thoughts and actions of many Laboratory employees throughout the year, it is transition. Transition refers to the major shift that took place on October 1, when the University of California relinquished management responsibility for Lawrence Livermore National Laboratory (LLNL), and Lawrence Livermore National Security, LLC (LLNS), became the new Laboratory management contractor for the Department of Energy's (DOE's) National Nuclear Security Administration (NNSA). In the 55 years under the University of California, LLNL amassed an extraordinary record of significant accomplishments, clever inventions, and momentous contributions in the service of protecting the nation. This legacy provides the new organization with a built-in history, a tradition of excellence, and a solid set of core competencies from which to build the future. I am proud to note that in the nearly seven years I have had the privilege of leading the Computation Directorate, our talented and dedicated staff has made far-reaching contributions to the legacy and tradition we passed on to LLNS. Our place among the world's leaders in high-performance computing, algorithmic research and development, applications, and information technology (IT) services and support is solid. I am especially gratified to …

AVA Solar has developed a very low cost solar photovoltaic (PV) manufacturing process and has demonstrated the significant economic and commercial potential of this technology. This I & I Category 3 project provided significant assistance toward accomplishing these milestones. The original goals of this project were to design, construct and test a production prototype system, fabricate PV modules and test the module performance. The original module manufacturing costs in the proposal were estimated at $2/Watt. The objectives of this project have been exceeded. An advanced processing line was designed, fabricated and installed. Using this automated, high throughput system, high efficiency devices and fully encapsulated modules were manufactured. AVA Solar has obtained 2 rounds of private equity funding, expand to 50 people and initiated the development of a large scale factory for 100+ megawatts of annual production. Modules will be manufactured at an industry leading cost which will enable AVA Solar's modules to produce power that is cost-competitive with traditional energy resources. With low manufacturing costs and the ability to scale manufacturing, AVA Solar has been contacted by some of the largest customers in the PV industry to negotiate long-term supply contracts. The current market for PV has continued to grow …

This research focused on efforts to prepare and characterize the first copper-indium-boron-diselenide (CIBS) photovoltaic materials. Attempts to fabricate CIBS in thin-film form followed a three-step process: 1) RF sputtering of copper, indium, and boron to form a copper-indium-boron (CIB) alloy; 2) ex-situ selenization of CIB via physical vapor deposition; 3) annealing the final product. No CIBS materials were produced with this method due to the formation of an unstable boron diselenide species that formed in step 2. Detailed investigations of the CIB alloy formation revealed that boron does not adequately mix with the copper and indium in step 1. In the last year, a nanoscience-based method has shown greater promise for successful CIBS preparation. In this two-step method, sources of copper, indium, boron, and selenium are combined and heated in a high-boiling amine solvent. The isolated product is then annealed at temperatures between 400-500 deg. C. Currently, purified CIBS has not been isolated and characterized but further study and development of this nanoscience-based method is in progress through the support of two grants from the DOE Office of Energy Renewability and Efficiency and the State of Nebraska’s Nebraska Research Initiative program. The research described in this report resulted in four …

This report assesses the potential for future precipitation of expansive phases that could cause fracturing in saltstone. It examines the equilibrium case using The Geochemist's Workbench{reg_sign} reaction path model. The scenarios simulated examine the effects of different possible infiltrating fluids, different saltstone formulations, and different amounts of minerals available for reaction. Mineralogy of the vault cement and saltstone were estimated using reported chemical compositions of each. The infiltrating fluid was assumed to be either rainwater equilibrated with vault cement or rainwater itself. The simulations assumed that minerals were homogeneously distributed in saltstone and that each pore volume of infiltration reached equilibrium with the mineral assemblage. Fracturing that initiates in pores by expansive phase precipitation is unlikely to occur in saltstone because the maximum amount of porosity filled is 34%. If less than 100% of the saltstone minerals are available for reaction, less porosity will be lost to expansive phases. Likewise, the formulation of saltstone used will affect the amount of porosity filled by expansive phases.