Advancing heat transfer technologies is a critical factor in power electronics equipment. NREL aims to characterize and develop advanced heat transfer technologies.

This paper will discuss the evolution of an operations-based organization to a project-based organization to facilitate successful deactivation of a major nuclear facility. It will describe the plan used for scope definition, staff reorganization, method estimation, baseline schedule development, project management training, and results of this transformation. It is a story of leadership and teamwork, pride and success. Workers at the Savannah River Site's (SRS) F Canyon Complex (FCC) started with a challenge--take all the hazardous byproducts from nearly 50 years of operations in a major, first-of-its-kind nuclear complex and safely get rid of them, leaving the facility cold, dark, dry and ready for whatever end state is ultimately determined by the United States Department of Energy (DOE). And do it in four years, with a constantly changing workforce and steadily declining funding. The goal was to reduce the overall operating staff by 93% and budget by 94%. The facilities, F Canyon and its adjoined sister, FB Line, are located at SRS, a 310-square-mile nuclear reservation near Aiken, S.C., owned by DOE and managed by Washington Group International subsidiary Washington Savannah River Company (WSRC). These facilities were supported by more than 50 surrounding buildings, whose purpose was to provide support …

We present simple string models which dynamically break supersymmetry without non-Abelian gauge dynamics. The Fayet model, the Polonyi model, and the O'Raifeartaigh model each arise from D-branes at a specific type of singularity. D-brane instanton effects generate the requisite exponentially small scale of supersymmetry breaking.

The Supersymmetry Les Houches Accord (SLHA) [1] provides a universal set of conventions for conveying spectral and decay information for supersymmetry analysis problems in high energy physics. Here, we propose extensions of the conventions of the first SLHA to include various generalizations: the minimal supersymmetric standard model with violation of CP, R-parity, and flavor, as well as the simplest next-to-minimal model.

The Supersymmetry Les Houches Accord (SLHA) provides a universal set of conventions for conveying spectral and decay information for supersymmetry analysis problems in high energy physics. Here, we propose extensions of the conventions of the first SLHA to include various generalizations: the minimal supersymmetric standard model with violation of CP, R-parity, and flavor, as well as the simplest next-to-minimal model.

The lack of an acceptable intrusion monitoring solution limits the deployment of 10GE (10 Gigabit-per-second Ethernet) technology across the LLNL's unclassified network infrastructure. The desire to operate at 10GE motivates us to evaluate the functionality and performance of a 10GE intrusion monitoring solution, the Force10 P10.

A new version of a Constricted Plasma Source is described,characterized by all metal-ceramic construction, a linear slit exit of180 mm length, and cw-operation (typically 50 kHz) at an average power of1.5 kW. The plasma source is here operated with oxygen gas, producingstreaming plasma that contains mainly positive molecular and atomic ions,and to a much lesser degree, negative ions. The maximum total ion currentobtained was about 0.5 A. The fraction of atomic ions reached more than10 percent of all ions when the flow rate was less then 10 sccm O2,corresponding to a chamber pressure of about 0.5 Pa for the selectedpumping speed. The energy distribution functions of the different ionspecies were measured with a combinedmass spectrometer and energyanalyzer. The time-averaged distribution functions were broad and rangedfrom about 30eV to 90 eV at 200 kHz and higher frequencies, while theywere only several eV broad at 50 kHz and lower frequencies, with themaximum located at about 40 eV for the grounded anode case. This maximumwas shifted down to about 7 eV when the anode was floating, indicatingthe important role of the plasma potential for the ion energy for a givensubstrate potential. The source could be scaled to greater length and maybe useful for …

None

Technical Design Report (TDR) describes the preliminary design of the NOvA accelerator upgrades, NOvA detectors, detector halls and detector sites. Compared to the March 2006 and November 2006 NOvA Conceptual Design Reports (CDR), critical value engineering studies have been completed and the alternatives still active in the CDR have been narrowed to achieve a preliminary technical design ready for a Critical Decision 2 review. Many aspects of NOvA described this TDR are complete to a level far beyond a preliminary design. In particular, the access road to the NOvA Far Detector site in Minnesota has an advanced technical design at a level appropriate for a Critical Decision 3a review. Several components of the accelerator upgrade and new neutrino detectors also have advanced technical designs appropriate for a Critical Decision 3a review. Chapter 1 is an Executive Summary with a short description of the NOvA project. Chapter 2 describes how the Fermilab NuMI beam will provide a narrow band beam of neutrinos for NOvA. Chapter 3 gives an updated overview of the scientific basis for the NOvA experiment, focusing on the primary goal to extend the search for {nu}{sub {mu}} {yields} {nu}{sub e} oscillations and measure the sin{sup 2}(2{theta}{sub 13}) parameter. …

Models of late-time neutrino mass generation contain new interactions of the cosmic background neutrinos with supernova relic neutrinos (SRNs). Exchange of an on-shell light scalar may lead to significant modification of the differential SRN flux observed at earth. We consider an Abelian U(1) model for generating neutrino masses at low scales, and show that there are cases for which the changes induced in the flux allow one to distinguish the Majorana or Dirac nature of neutrinos, as well as the type of neutrino mass hierarchy (normal or inverted or quasi-degenerate). In some region of parameter space the determination of the absolute values of the neutrino masses is also conceivable. Measurements of the presence of these effects may be possible at the next-generation water Cerenkov detectors enriched with Gadolinium, or a 100 kton liquid argon detector.

We discuss how the fission Q values for {sup 235}U, {sup 238}U and {sup 239}Pu depend on the energy of the incident neutron. We then describe how these values have been implemented in mcfgen etc. This paper describes the calculation of energy-dependent fission Q values by Madland [1] and explains how it has been implemented in the ENDL database for use in the LLNL codes.

None

In July 2004, LLNL adopted the International Standard ISO 14001 as a Work Smart Standard in lieu of DOE Order 450.1. In support of this new requirement the Director issued a new environmental policy that was documented in Section 3.0 of Document 1.2, ''ES&H Policies of LLNL'', in the ES&H Manual. In recent years the Environmental Management System (EMS) process has become formalized as LLNL adopted ISO 14001 as part of the contract under which the laboratory is operated for the Department of Energy (DOE). On May 9, 2005, LLNL revised its Integrated Safety Management System Description to enhance existing environmental requirements to meet ISO 14001. Effective October 1, 2005, each new project or activity is required to be evaluated from an environmental aspect, particularly if a potential exists for significant environmental impacts. Authorizing organizations are required to consider the management of all environmental aspects, the applicable regulatory requirements, and reasonable actions that can be taken to reduce negative environmental impacts. During 2006, LLNL has worked to implement the corrective actions addressing the deficiencies identified in the DOE/LSO audit. LLNL has begun to update the present EMS to meet the requirements of ISO 14001:2004. The EMS commits LLNL--and each employee--to …

The kinetic nonlinear dispersion relation, and frequency shift {delta}{omega}{sub srs}, of a plasma wave driven by stimulated Raman scattering (SRS) are presented. Our theoretical calculations are fully electromagnetic, and use an adiabatic expression for the electron susceptibility which accounts for the change in phase velocity as the wave grows. When k{lambda}{sub D} {approx}> 0.35 (k being the plasma wave number and {lambda}{sub D} the Debye length), {delta}{omega}{sub srs} is significantly larger than could be inferred by assuming that the wave is freely propagating. Our theory is in excellent agreement with 1-D Eulerian Vlasov-Maxwell simulations when 0.3 {le} k{lambda}{sub D} {le} 0.58, and allows discussion of previously proposed mechanisms for Raman saturation. In particular, we find that no 'loss of resonance' of the plasma wave would limit the Raman growth rate, and that saturation through a phase detuning between the plasma wave and the laser drive is mitigated by wave number shifts.

Thermal control is a critical factor in power electronics equipment. NREL aims to integrate and improve thermal system performance in power electronics.

The study of dislocation nucleation in closed-packed metals by nanoindentation has recently attracted much interest. Here, we address the peculiarities of the incipient plasticity in body centered cubic (bcc) metals using low index Ta single-crystals as a model system. The combination of nanoindentation with high-resolution atomic force microscopy provides us with experimental atomic-scale information on the process of dislocation nucleation and multiplication. Our results reveal a unique deformation behavior of bcc Ta at the onset of plasticity which is distinctly different from that of closed-packed metals. Most noticeable, we observe only one rather than a sequence of discontinuities in the load-displacement curves. This and other differences are discussed in context of the characteristic plastic deformation behavior of bcc metals.

This report is on Arts in Education: Background and Legislation.

The objective of this project was to define the scope and cost of a technology research and development program that will demonstrate the feasibility of using an off-the-shelf, unmodified, large bore diesel powered generator in a grid-connected application, utilizing various blends of BioDiesel as fuel. Furthermore, the objective of project was to develop an emissions control device that uses a catalytic process and BioDiesel (without the presence of Ammonia or Urea)to reduce NOx and other pollutants present in a reciprocating engine exhaust stream with the goal of redefining the highest emission reduction efficiencies possible for a diesel reciprocating generator. Process: Caterpillar Power Generation adapted an off-the-shelf Diesel Generator to run on BioDiesel and various Petroleum Diesel/BioDiesel blends. EmeraChem developed and installed an exhaust gas cleanup system to reduce NOx, SOx, volatile organics, and particulates. The system design and function was optimized for emissions reduction with results in the 90-95% range;

The purpose of this paper is to report on processing of raw waveform data from 4547 events recorded at 12 stations between 2001 and 2005 by the Salton Sea Geothermal Field (SSGF) seismic network. We identified a central region of the network where vertically elongated distributions of hypocenters have previously been located from regional network analysis. We process the data from the local network by first autopicking first P and S arrivals; second, improving these with hand picks when necessary; then, using cross-correlation to provide very precise P and S relative arrival times. We used the HypoDD earthquake location algorithm to locate the events. We found that the originally elongated distributions of hypocenters became more tightly clustered and extend down the extent of the study volume at 10 Km. However, we found the shapes to depend on choices of location parameters. We speculate that these narrow elongated zones of seismicity may be due to stress release caused by fluid flow.

The Geochemical Rate/RNA Integration Study (GRIST) project sought to correlate biogeochemical flux rates with measurements of gene expression and mRNA abundance to demonstrate the application of molecular approaches to estimate the presence and magnitude of a suite of biogeochemical processes. The study was headed by Lee Kerkhoff of Rutgers University. In this component of the GRIST study, we characterized ambient nutrient concentrations and measured uptake rates for dissolved inorganic nitrogen (DIN, ammonium, nitrate and nitrite) and dissolved organic nitrogen (urea and dissolved free amino acids) during two diel studies at the Long-Term Ecosystem Observatory (LEO-15) on the New Jersey continental shelf.

This report contains all the geochemical and selected physical characterization data collected on vadose zone sediment recovered from 5 direct push characterization holes emplaced to investigate vadose zone contamination associated with leaks from tanks 241-TY-105 (UPR-200-W-152) and 241-TY-106 (UPR-200-W-153). Tank 241-TY-105 is estimated to have leaked 35,000 gal of tributyl phosphate (TBP) waste from the uranium recovery process to the vadose zone in 1960. Tank 241-TY-106 is estimated to have leaked 20,000 gal of TBP-uranium recovery waste to the vadose zone in 1959. Although several drywells in the vicinity of tank 241-TY-106 contain measurable quantities of cesium-137 and/or cobalt-60, their relatively low concentrations indicate that the contaminant inventory in the vadose zone around tank 241-TY-106 is quite small. Additionally, this report contains all the geochemical and selected physical characterization data collected on vadose zone sediment recovered from 7 direct push characterization holes emplaced to investigate vadose zone contamination associated with an overfill event and leak from tank 241-T-101.

Large-eddy simulation of passive scalar mixing by a fully three-dimensional round incompressible turbulent jet is evaluated using the Inertial LES methodology with multifractal subgrid-scale modeling. The Inertial LES approach involves the direct calculation of the inertial term {ovr u{sub i} u{sub j}} in the filtered incompressible Navier-Stokes equation and the scalar flux term {ovr u{sub j} {phi}} in the filtered advection-diffusion equation, using models for the subgrid velocity field u{sup sgs} and the subgrid scalar-concentration field {phi}{sup sgs}. In this work, the models are based on the multifractal structure of the subgrid enstrophy 2Q{sup sgs}(x,t) {triple_bond} {omega}{sup sgs} {center_dot} {omega}{sup sgs} and scalar-dissipation {chi}{sup sgs} (x,t) {triple_bond} D{del}{phi}{sup sgs} {center_dot} {del}{phi}{sup sgs} fields, respectively. No artificial viscosity or diffusivity constructs are applied and no explicit dealiasing is performed. Numerical errors are controlled by the application of an adaptive backscatter limiter. The present work summarizes the initial evaluation of the Inertial LES approach in the context of the round turbulent jet, including examinations of jet self-similarity and the scale-to-scale distribution of kinetic and scalar energy in the jet far field. These inquiries confirm that the Inertial LES method accurately recovers the large scale structure of this complex turbulent shear flow.

The Optic Assembly Building (OAB) is a facility where large optical mirror units are assembled and installed into Line Replaceable Units (LRUs) for deployment into the National Ignition Facility (NIF) laser system. The New Optics Insertion Device (NOID) is a powered jib crane specially designed to handle large optical assemblies. The NOID arm has three degrees of freedom. it can rotate about the vertical boom, travel up and down the boom, and extend away from and retract in towards the boom. The NOID is used to assist in the assembly of five types of Laser Mirror (LM) LRUs. These five LMs have been creatively named, LM4, LM5, LM6, LM7, and LM8. The LM4 and LM5 LRUs each contain four Mirror Sub-Assemblies (MSAs). The LM6, LM7, and LM8 LRUs each contain 2 MSAs. The MSAs are assembled apart from the LRU and are then installed in the LRU at the LM4-8 workstations. An MSA NOID End-Effector is required to interface with the MSAs and install them into the LRUs. The End-Effector must attach to the robo-hand on the end of the NOID arm. At the time the MSA NOID End-Effector was being designed the NOID, the LM4-5 workstation, and the LM6-8 …

We analyze data from the Lawrence Livermore National Lab (LLNL) Electron Beam Ion Trap (EBIT) that simulates a CIE plasma by sweeping the electron beam to approximate a Maxwellian velocity distribution. These results are compared to spectra of confirmed astronomical CIE plasmas (e.g. outer regions of x-ray clusters) observed by XMM/RGS. We utilize the Photon Clean Method (PCM) to quantify these spectra (EBIT and XMM/RGS) in the form of ratios of Fe L lines in the emission complex near 1 keV. The variances of line fluxes are measured with bootstrap methods (Efron 1979). Both of these observations are further compared with theoretical predictions of Fe L line fluxes from APED and similar atomic databases.