A letter report issued by the Government Accountability Office with an abstract that begins "During a hearing in 2004 on the financial services industry, congressional members and witnesses expressed concern about the industry's lack of workforce diversity, particularly in key management-level positions. Witnesses stated that financial services firms (e.g., banks and securities firms) had not made sufficient progress in recruiting and promoting minority and women candidates for management-level positions. Concerns were also raised about the ability of minority-owned businesses to raise capital (i.e., debt or equity capital). GAO was asked to provide an overview on the status of diversity in the financial services industry. This report discusses (1) what available data show regarding diversity at the management level in the financial services industry from 1993 through 2004, (2) the types of initiatives that financial firms and related organizations have taken to promote workforce diversity and the challenges involved, and (3) the ability of minority- and women-owned businesses to obtain access to capital in financial markets and initiatives financial institutions have taken to make capital available to these businesses."

Correspondence issued by the Government Accountability Office with an abstract that begins "On April 6, 2006, we testified before Congress on the Department of Defense's (DOD) space acquisitions. In fiscal year 2007, DOD expects to spend nearly $7 billion to acquire space-based capabilities to support current military and other government operations as well as to enable DOD to transform the way it collects and disseminates information, gathers data on its adversaries, and attacks targets. Despite its growing investment in space, however, DOD's space system acquisitions have experienced problems over the past several decades that have driven up costs by hundreds of millions, even billions, of dollars; stretched schedules by years; and increased performance risks. In some cases, capabilities have not been delivered to the warfighter after decades of development. Within this context, Congress requested that we provide additional comments regarding the need for better program management, space acquisition policy, and DOD's Space Radar and Transformational Satellite Communications System acquisitions."

Guidance issued by the Government Accountability Office with an abstract that begins "This publication has been superseded by GAO-07-162GG, Government Auditing Standards: January 2007 Revision. This is the Exposure Draft of the Government Auditing Standards 2006 revision. This document outlines standards that contain requirements for auditor reporting on internal control. The revision supersedes the 2003 revision."

In 2004, the US DOE established the LHC Accelerator Research Program (LARP) with the goal of developing a technology base for future upgrades of the LHC. The focus of the magnet program, which is a collaboration of three US laboratories, BNL, FNAL and LBNL, is on development of high gradient quadrupoles using Nb{sub 3}Sn superconductor. Other program components address issues regarding magnet design, radiation-hard materials, long magnet scale-up, quench protection, fabrication techniques and conductor and cable R&D. This paper presents an overall view of the program with emphasis on the current quadrupole project and outlines the long-term goals of the program.

Three-dimensional two-fluid simulations of heat transport due to resonant magnetic perturbations of tokamaks have been computed by coupling the TRIP3D field line tracing code to the E3D edge transport code. The predicted electron temperature contours follow the new separatrix represented by the perturbed invariant manifold structure of the X-point in qualitative agreement with X-point TV observations. However, preliminary modeling predicts that the resulting stochastic heat transport is greater than that measured in low-collisionality ELM suppression experiments in DIII-D H-mode plasmas. While improved determination of transport coefficients is definitely required, possible explanations include plasma screening of resonant perturbations, invalid treatment of the edge as a fluid, or insufficient understanding of stochastic heat transport.

Qualification of microsystems for weapon applications is critically dependent on our ability to build confidence in their performance, by predicting the evolution of their behavior over time in the stockpile. The objective of this work was to accelerate aging mechanisms operative in surface micromachined silicon microelectromechanical systems (MEMS) with contacting surfaces that are stored for many years prior to use, to determine the effects of aging on reliability, and relate those effects to changes in the behavior of interfaces. Hence the main focus was on 'dormant' storage effects on the reliability of devices having mechanical contacts, the first time they must move. A large number ({approx}1000) of modules containing prototype devices and diagnostic structures were packaged using the best available processes for simple electromechanical devices. The packaging processes evolved during the project to better protect surfaces from exposure to contaminants and water vapor. Packages were subjected to accelerated aging and stress tests to explore dormancy and operational environment effects on reliability and performance. Functional tests and quantitative measurements of adhesion and friction demonstrated that the main failure mechanism during dormant storage is change in adhesion and friction, precipitated by loss of the fluorinated monolayer applied after fabrication. The data indicate …

Experiments are described which examine the transport and deposition of carbon entering the main plasma scrape-off layer in DIII-D. {sup 13}CH{sub 4} was injected from a toroidally symmetric source into the crown of lower single-null detached ELMy H-mode plasmas. {sup 13}C deposition, mapped by nuclear reaction analysis of tiles, was high at the inner divertor but absent at the outer divertor, as found previously for low density L-mode plasmas. This asymmetry indicates that ionized carbon is swept towards the inner divertor by a fast flow in the scrape-off layer. In the private flux region between inner and outer strike points, carbon deposition was low for L-mode but high for the H-mode plasmas. OEDGE modeling reproduces observed deposition patterns and indicates that neutral carbon dominates deposition in the divertor from detached H-mode plasmas.

There is a growing acceptance that the environmentalbenefits of forests extend beyond traditional ecological benefits andinclude the mitigation of climate change. Interest in forestry mitigationactivities has led to the inclusion of forestry practices at the projectlevel in international agreements. Climate change activities place newdemands on participating institutions to set baselines, establishadditionality, determine leakage, ensure permanence, and monitor andverify a project's greenhouse gas benefits. These issues are common toboth forestry and other types of mitigation projects. They demandempirical evidence to establish conditions under which such projects canprovide sustained long term global benefits. This Special Issue reportson papers that experiment with a range of approaches based on empiricalevidence for the setting of baselines and estimation of leakage inprojects in developing Asia and Latin America.

The Berkeley UXO discriminator (BUD) (Figure 1) is a portable Active Electromagnetic (AEM) system for UXO detection and characterization that quickly determines the location, size, and symmetry properties of a suspected UXO. The BUD comprises of three orthogonal transmitters that 'illuminate' a target with fields in three independent directions in order to stimulate the three polarization modes that, in general, characterize the target EM response. In addition, the BUD uses eight pairs of differenced receivers for response recording. Eight receiver coils are placed horizontally along the two diagonals of the upper and lower planes of the two horizontal transmitter loops. These receiver coil pairs are located on symmetry lines through the center of the system and each pair sees identical fields during the on-time of the pulse in all of the transmitter coils. They are wired in opposition to produce zero output during the on-time of the pulses in three orthogonal transmitters. Moreover, this configuration dramatically reduces noise in the measurements by canceling the background electromagnetic fields (these fields are uniform over the scale of the receiver array and are consequently nulled by the differencing operation), and by canceling the noise contributed by the tilt of the receivers in the …

Use of carbon in tokamaks leads to a serious tritium retention issue due to co-deposition. To further investigate the processes involved, a detached ELMy H-mode (6.5 MW NBI) experiment was performed on DIII-D in which {sup 13}CH{sub 4} was puffed into the main vessel through the toroidally symmetric pumping plenum at the top of lower single-null discharges. Subsequently, the {sup 13}C content of tiles taken from the vessel wall was measured. The interpretive OEDGE code was used to model the results. The {sup 13}C deposition pattern could be reproduced, in general shape and magnitude, by assuming in the code the existence of a parallel flow and a radial pinch in the scrape-off layer. Parallel flows of Mach {approx} 0.3 toward the inner divertor and a radial pinch {approx}10 to 20 m/s (+ R-direction) were found to yield {sup 13}C deposition comparable to the experiment.

Utilizing load, price, and survey data for 119 largecustomers that paid competitively determined hourly electricity pricesannounced the previous day between 2000 and 2004, this study providesinsight into the factors that determine the intensity of price response.Peak and off-peak electricity can be: perfect complements, substitutes,or substitutes where high peak prices cause temporary disconnection fromthe grid, as for some firms with on-site generation. The averageelasticity of substitution is 0.11. Thirty percent of the customers usepeak and off-peak electricity in fixed proportions. The 18 percent withelasticities greater than 0.10 provide 75 percent of the aggregate priceresponse. In contrast to Industrial customers, Commercial/Retail andGovernment/Education customers are more price responsive on hot days andwhen the ratio of peak to off-peak prices is high. Price responsivenessis not substantially reduced when customers operate near peak usage.Diversity of customer circumstances and price response suggest dynamicpricing is suited for some, but not all customers.

A prototype active electromagnetic system has been developedfor detecting and characterizing UXO. The system employs two orthogonalvertical loop transmitters and a pair of horizontal loop transmittersspaced apart vertically by 0.7 m. Eight vertical field detectors aredeployed in the plane of each of the horizontal loops and are arranged tomeasure offset vertical gradients of the fields. The location andorientation of the three principal polarizabilities of a target can berecovered from a single position of the transmitter-receiver system.Further characterization of the target is obtained from the broadbandresponse. The system employs a bipolar half sine pulse train currentwaveform and the detectors are dB/dt induction coils designed to minimizethe transient response of the primary field pulse. The target transientis recovered in a 40 mu-sec to 1.0 msec window. The ground responseimposes an early time limit on the time window and system/ambient noiselimits the late time response. Nevertheless for practical transmittermoments and optimum receivers the size and the ratio of conductivity topermeability canbe accurately recovered. The prototype system hassuccessfully recovered the depths and polarizabilities of ellipsoidaltest targets.

The U.S. Dept. of Energy funded Frio Brine Pilot provided an opportunity to test borehole seismic monitoring techniques in a saline formation in southeast Texas. A relatively small amount of CO{sub 2} was injected (about 1600 tons) into a thin injection interval (about 6 m thick at 1500 m depth). Designed tests included time-lapse vertical seismic profile (VSP) and crosswell surveys which investigated the detectability of CO{sub 2} with surface-to-borehole and borehole-to-borehole measurement.

The radial particle flux in the scrape-off-layer (SOL) during ELMing H-mode is examined in DIII-D as a function of density. The global radial particle flux in the outboard far SOL is determined by a window frame technique. Between ELMs the outboard far SOL particle flux increases strongly with density but remains similar to the particle flux across the separatrix as estimated by the pedestal density and temperature gradients. At low density the steep density gradient of the pedestal extends up to 2 cm outside the separatrix. At high density the density gradient flattens just outside the separatrix making this region critical for assessment of the far SOL particle flux. During ELMs the far SOL particle flux becomes localized to the outboard midplane and the assumptions for the window frame analysis break down. Implications for scaling of main chamber wall particle flux and pedestal fueling are explored.

An accurate modeling of the beam-beam interaction is essential to maximizing the luminosity in existing and future colliders. BeamBeam3D was the first parallel code that can be used to study this interaction fully self-consistently on high-performance computing platforms. Various all-to-all personalized communication (AAPC) algorithms dominate its communication patterns, for which we developed a sequence of performance models using a series of micro-benchmarks. We find that for SMP based systems the most important performance constraint is node-adapter contention, while for 3D-Torus topologies good performance models are not possible without considering link contention. The best average model prediction error is very low on SMP based systems with of 3% to 7%. On torus based systems errors of 29% are higher but optimized performance can again be predicted within 8% in some cases. These excellent results across five different systems indicate that this methodology for performance modeling can be applied to a large class of algorithms.

The Nevada Test Site (NTS) is operated by the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). From 1951 through 1992, the NTS was operated as the nation’s site for nuclear weapons testing. The release of man-made radionuclides from the NTS as a result of testing activities has been monitored since the first decade of atmospheric testing. After 1962, when nuclear tests were conducted only underground, the radiation exposure to the public surrounding the NTS was greatly reduced. After the 1992 moratorium on nuclear testing, radiation monitoring on the NTS focused on detecting airborne radionuclides that are resuspended into the air (e.g., by winds, dust-devils) along with historically-contaminated soils on the NTS. To protect the public from harmful levels of man-made radiation, the Clean Air Act, National Emission Standards for Hazardous Air Pollutants (NESHAP) (40 Code of Federal Regulations 61 Subpart H) limits the release of radioactivity from a U. S. Department of Energy (DOE) facility (e.g., the NTS) to 10 millirem per year (mrem/yr) effective dose equivalent (EDE) to any member of the public. This is the dose limit established for someone living off of the NTS for inhaling radioactive particles that may be carried …

The authors developed a Same-Side Kaon Tagging algorithm to determine the production flavor of B{sub s}{sup 0} mesons. Until the B{sub s}{sup 0} mixing frequency is clearly observed the performance of the Same-Side Kaon Tagging algorithm can not be measured on data but has to be determined on Monte Carlo simulation. Data and Monte Carlo agreement has been evaluated for both the B{sub s}{sup 0} and the high statistics B{sup +} and B{sup 0} modes. Extensive systematic studies were performed to quantify potential discrepancies between data and Monte Carlo. The final optimized tagging algorithm exploits the particle identification capability of the CDF II detector. it achieves a tagging performance of {epsilon}D{sup 2} = 4.0{sub -1.2}{sup +0.9} on the B{sub s}{sup 0} {yields} D{sub s}{sup -} {pi}{sup +} sample. The Same-Side Kaon Tagging algorithm presented here has been applied to the ongoing B{sub s}{sup 0} mixing analysis, and has provided a factor of 3-4 increase in the effective statistical size of the sample. This improvement results in the first direct measurement of the B{sub s}{sup 0} mixing frequency.

Between 1955 and 1973, an estimated 750,000 kg of carbon tetrachloride were discharged to the soil in the 200 West Area of the Hanford Site as part of the plutonium production process. Of this amount, some carbon tetrachloride reached the groundwater more than 70 m below the ground surface and formed a plume of 10 km2. Recent information has shown that the carbon tetrachloride plume extends to a depth of at least 60 m below the water table. Some carbon tetrachloride has been degraded either by the original process or subsequent transformations in the subsurface to form a co-existing chloroform plume. Although current characterization efforts are improving the conceptual model of the source area, more information is needed to effectively assess the fate and transport of carbon tetrachloride and chloroform to support upcoming remediation decisions for the plume. As noted in a simulation study by Truex et al. (2001), parameters describing porosity, sorption, and abiotic degradation have the largest influence on predicted plume behavior. The work proposed herein will improve the ability to predict future plume movement by better quantifying abiotic degradation mechanisms and rates. This effort will help define how much active remediation may be needed and estimate where …

The equilibrium of an infinitely long, strongly magnetized, non-neutral plasma confined in a Penning-Malmberg trap with an additional mirror coil has been solved analytically [J. Fajans, Phys. Plasmas 10, 1209 (2003)] and shown to exhibit unusual features. Particles not only reflect near the mirror in the low field region, but also may be weakly trapped in part of in the high field region. The plasma satisfies a Boltzmann distribution along field lines; however, the density and the potential vary along field lines. Some other simplifying assumptions were employed in order to analytically characterize the equilibrium; for example the interface region between the low and high field regions was not considered. The earlier results are confirmed in the present study, where two-dimensional particle-in-cell simulations are performed with the Warp code in a more realistic configuration with an arbitrary (but physical) density profile, realistic trap geometry and magnetic field. A range of temperatures and radial plasma sizes are considered. Particle tracking is used to identify populations of trapped and untrapped particles. The present study also shows that it is possible to obtain local equilibria of non-neutral plasmas using a collisionless PIC code, by a scheme that uses the inherent numerical collisionality as …

The U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office manages two low-level Radioactive Waste Management Sites at the Nevada Test Site. The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste. This report summarizes characterization and monitoring work pertinent to the 92-Acre Area in the southeast part of the Area 5 Radioactive Waste Management Sites. The decades of characterization and assessment work at the Area 5 RWMS indicate that the access controls, waste operation practices, site design, final cover design, site setting, and arid natural environment contribute to a containment system that meets regulatory requirements and performance objectives for the short- and long-term protection of the environment and public. The available characterization and Performance Assessment information is adequate to support design of the final cover and development of closure plans. No further characterization is warranted to demonstrate regulatory compliance. U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office is proceeding with the development of closure plans for the six closure units of the 92-Acre Area.

In this paper we examine the impacts of building new coal, gas, or wind plants in three states: Colorado, Michigan, and Virginia. Our findings indicate that local/state economic impacts are directly related to the availability and utilization of local industries and services to build and operate the power plant. For gas and coal plants, the economic benefit depends significantly on whether the fuel is obtained from within the state, out of state, or some combination. We also find that the taxes generated by power plants can have a significant impact on local economies via increased expenditures on public goods.

The U.S. Department of Energy (DOE) Building Technologies Program and the DOE research laboratories conduct a great deal of research on building technologies. However, differences in models and simulation tools used by various research groups make it difficult to compare results among studies. The authors have developed a set of 22 hypothetical benchmark buildings and weighting factors for nine locations across the country, for a total of 198 buildings.

After the fabrication and test of HD1, a 16 T Nb{sub 3}Sn dipole magnet based on flat racetrack coil configuration, the Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) is developing the Nb{sub 3}Sn dipole HD2. With a dipole field above 15 T, a 35 mm clear bore, and nominal field harmonics within a fraction of one unit, HD2 represents a further step towards the application of block-type coils to high-field accelerator magnets. The design features tilted racetrack-type ends, to avoid obstructing the beam path, and a 4 mm thick stainless steel tube, to support the coil during the preloading operation. The mechanical structure, similar to the one used for HD1, is based on an external aluminum shell pretensioned with pressurized bladders. Axial rods and stainless steel plates provide longitudinal support to the coil ends during magnet excitation. A 3D finite element analysis has been performed to evaluate stresses and deformations from assembly to excitation, with particular emphasis on conductor displacements due to Lorentz forces. Numerical results are presented and discussed.

The Transportation Energy Data Book: Edition 25 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of Planning, Budget Formulation, and Analysis, under the Energy Efficiency and Renewable Energy (EERE) program in the Department of Energy (DOE). Designed for use as a desk-top reference, the data book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. The latest editions of the Data Book are available to a larger audience via the Internet (cta.ornl.gov/data). This edition of the Data Book has 12 chapters which focus on various aspects of the transportation industry. Chapter 1 focuses on petroleum; Chapter 2 - energy; Chapter 3 - highway vehicles; Chapter 4 - light vehicles; Chapter 5 - heavy vehicles; Chapter 6 - alternative fuel vehicles; Chapter 7 - fleet vehicles; Chapter 8 - household vehicles; and Chapter 9- nonhighway modes; Chapter 10 - transportation and the economy; Chapter 11 - greenhouse gas emissions; and Chapter 12 - criteria pollutant emissions. The sources …