A letter report issued by the Government Accountability Office with an abstract that begins "The Trilogy project--initiated in 2001--is the Federal Bureau of Investigation's (FBI) largest information technology (IT) upgrade to date. While ultimately successful in providing updated IT infrastructure and systems, Trilogy was not a success with regard to upgrading FBI's investigative applications. Further, the project was plagued with missed milestones and escalating costs, which eventually totaled nearly $537 million. In light of these events, Congress asked GAO to determine whether (1) internal controls provided reasonable assurance that improper payment of unallowable contractor costs would not be made or would be detected in the normal course of business, (2) payments to contractors were properly supported as a valid use of government funds, and (3) FBI maintained proper accountability for assets purchased with Trilogy project funds."

A letter report issued by the Government Accountability Office with an abstract that begins "Under its Hospital Mortgage Insurance Program, the Department of Housing and Urban Development's (HUD) Federal Housing Administration (FHA) insures nearly $5 billion in mortgage loans for the renovation or construction of hospitals that would otherwise have difficulty accessing capital. In response to a requirement in the 2005 Consolidated Appropriations Conference Report, GAO examined (1) the design and management of the program, as compared with private insurance, (2) the nature and management of the relationship between HUD and the Department of Health and Human Services (HHS) in implementing the program, (3) the financial implications of the program to the General Insurance/Special Risk Insurance (GI/SRI) fund, including risk posed by program and market trends, and (4) how HUD estimates the annual credit subsidy for the program, including the factors and assumptions used."

A letter report issued by the Government Accountability Office with an abstract that begins "Among federal efforts to address the HIV/AIDS epidemic are the CARE Act of 1990 and the Housing Opportunities for Persons with AIDS program (HOPWA) administered by the Departments of Health and Human Services (HHS) and Housing and Urban Development (HUD), respectively. Both use formulas based upon a grantee's number of AIDS cases, rather than HIV and AIDS cases, to distribute funds to metropolitan areas, states, and territories. HIV cases must be incorporated with AIDS cases in CARE Act formulas not later than fiscal year 2007. GAO was asked to examine (1) how CARE Act and HOPWA funds are allocated among types of services, (2) the extent of funding distribution differences among CARE Act and HOPWA grantees, and how funding formula provisions contribute to these differences, and (3) what distribution differences could result from incorporating HIV case counts in CARE Act and HOPWA funding formulas."

A letter report issued by the Government Accountability Office with an abstract that begins "For fiscal years 1999 through 2005, the Health Resources and Services Administration (HRSA), an agency within the Department of Health and Human Services (HHS), spent about $2.7 billion to fund the more than 40 health professions education programs authorized under title VII and title VIII of the Public Health Service Act. These programs include those providing grants to institutions, direct assistance to students, and funding for health workforce analyses. Title VII includes programs related to the education of providers, such as primary care physicians. Title VIII includes programs related to nursing education. Most of these programs were last reauthorized in 1998. GAO reviewed changes in funding and in the number of these programs since 1998, HRSA's goals and assessment of the programs, and HRSA's national health professions workforce projections. GAO reviewed relevant laws and agency documents and data, and interviewed HRSA officials and representatives of health professions education associations."

Testimony issued by the Government Accountability Office with an abstract that begins "After the 2001 attack on the World Trade Center (WTC), nearly 3,000 people died and an estimated 250,000 to 400,000 people in the vicinity were affected. An estimated 40,000 people who responded to the disaster--including New York City Fire Department (FDNY) personnel and other government and private-sector workers and volunteers--were exposed to physical and mental health hazards. Concerns remain about the long-term health effects of the attack and about the nation's capacity to plan for and respond to health effects resulting from future disasters. Several federally funded programs have monitored the physical and mental health effects of the WTC attack. These monitoring programs include one-time screening programs and programs that also conduct follow-up monitoring. GAO was asked to assess the progress of these programs and examined (1) federally funded programs implemented by state and local government agencies or private institutions, (2) federally administered programs to monitor the health of federal workers who responded to the disaster in an official capacity, and (3) lessons learned from WTC monitoring programs. GAO reviewed program documents and interviewed federal, state, and local officials and others involved in WTC monitoring programs. This statement …

Variations in groundwater redox chemistry in the saturated zone near Yucca Mountain could have significant repository to the accessible environment. This study examines geochemical data relevant to the distribution of redox impacts on processes associated with the potential transport of redox-sensitive radionuclides from the proposed conditions in the saturated zone, the relationships between redox state and solubility and sorption coefficients for technetium and neptunium, and sensitivity in transport model simulations. Results indicate evidence for a zone of reducing conditions in the volcanic rocks of the saturated zone located to the east and south of the repository and along the inferred flow paths from the repository. A working hypothesis is that these reducing conditions are related to the presence of minor pyrite in the matrix of some volcanic units. Chemical equilibrium modeling of technetium solubility using EQ3/6 software codes is used to estimate the value of solubility limits as a function of Eh. Surface complexation modeling with the EQ3 code is used to estimate neptunium sorption coefficient values as a function of Eh. A general analytical approach, one-dimensional reactive transport modeling, and the three-dimensional saturated zone site-scale transport model using the FEHM software code are used to evaluate the impacts of …

Energy use of rooftop and other unitary air-conditioners in commercial applications accounts for about 1 quad (10{sup 15} Btu) of primary energy use annually in the U.S. [Reference 7]. The realization that this cooling equipment accounts for the majority of commercial building cooled floorspace and the majority also of commercial building energy use has spurred development of improved-efficiency equipment as well as development of stricter standards addressing efficiency levels. Another key market driver affecting design of rooftop air-conditioning equipment has been concern regarding comfort and the control of humidity. Trends for increases in outdoor air ventilation rates in certain applications, and the increasing concern about indoor air quality problems associated with humidity levels and moisture in buildings points to a need for improved dehumidification capability in air-conditioning equipment of all types. In many cases addressing this issue exacerbates energy efficiency, and vice versa. The integrated dedicated outdoor air system configuration developed in this project addresses both energy and comfort/humidity issues.

An international interlaboratory study (ILS) was conducted to evaluate the precision with which single-pass flow-through (SPFT) tests can be conducted by following a method to be standardized by the American Society for Testing and Materials - International. Tests for the ILS were conducted with the low-activity reference material (LRM) glass developed previously for use as a glass test standard. Tests were conducted at 70 {+-} 2 C using a LiCl/LiOH solution as the leachant to impose an initial pH of about 10 (at 70 C). Participants were provided with LRM glass that had been crushed and sieved to isolate the -100 +200 mesh size fraction, and then washed to remove fines. Participants were asked to conduct a series of tests using different solution flow rate-to-sample mass ratios to generate a range of steady-state Si concentrations. The glass dissolution rate under each test condition was calculated using the steady-state Si concentration and solution flow rate that were measured in the test. The glass surface area was estimated from the mass of glass used in the test and the Si content of LRM glass was known. A linear relationship between the rate and the steady-state Si concentration (at Si concentrations less than …

This paper investigates the impact of proposed repositorythermal-loading on mountain-scale flow and heat transfer in theunsaturated fractured rock of Yucca Mountain, Nevada. In this context, amodel has been developed to study the coupled thermal-hydrological (TH)processes at the scale of the entire Yucca Mountain. This mountain-scaleTH model implements the current geological framework and hydrogeologicalconceptual models, and incorporates the latest rock thermal andhydrological properties. The TH model consists of a two-dimensionalnorth-south vertical cross section across the entire unsaturated zonemodel domain and uses refined meshes near and around the proposedrepository block, based on the current repository design, drift layout,thermal loading scenario, and estimated current and future climaticconditions. The model simulations provide insights into thermallyaffected liquid saturation, gas- and liquid-phase fluxes, and elevatedwater and rock temperature, which in turn allow modelers to predict thechanges in water flux driven by evaporation/condensation processes, anddrainage between drifts.

Cadmium (Cd{sup 2+}), nickel (Ni{sup 2+}) and cobalt (Co{sup 2+}) are human and/or animal carcinogens. Zinc (Zn{sup 2+}) is not categorized as a carcinogen, and rather an essential element to humans. Metals were recently shown to inhibit DNA repair proteins that use metals for their function and/or structure. Here we report that the divalent ions Cd{sup 2+}, Ni{sup 2+}, and Zn{sup 2+} can inhibit the activity of a recombinant human N-methylpurine-DNA glycosylase (MPG) toward a deoxyoligonucleotide with ethenoadenine (var epsilonA). MPG removes a variety of toxic/mutagenic alkylated bases and does not require metal for its catalytic activity or structural integrity. At concentrations starting from 50 to 1000 {micro}M, both Cd{sup 2+} and Zn{sup 2+} showed metal-dependent inhibition of the MPG catalytic activity. Ni{sup 2+} also inhibited MPG, but to a lesser extent. Such an effect can be reversed with EDTA addition. In contrast, Co{sup 2+} and Mg{sup 2+} did not inhibit the MPG activity in the same dose range. Experiments using HeLa cell-free extracts demonstrated similar patterns of inactivation of the var epsilonA excision activity by the same metals. Binding of MPG to the substrate was not significantly affected by Cd{sup 2+}, Zn{sup 2+}, and Ni{sup 2+} at concentrations that …

In early 2005, Argonne National Laboratory conducted an Engineering Evaluation/Cost Analysis (EE/CA; Argonne 2005b) to address carbon tetrachloride contamination identified in groundwater and surface water at Murdock, Nebraska, approximately 22 mi east-northeast of Lincoln (Figure 1.1). The EE/CA study was performed for the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA), as the technical basis for a proposed removal action for the Murdock site. The EE/CA was conducted in compliance with an Administrative Order on Consent issued for Murdock by the U.S. Environmental Protection Agency (EPA 1991). Three removal action alternatives were examined through the use of site-specific data and predictive simulations of groundwater flow and contaminant transport performed with calibrated numerical models. The alternatives were evaluated individually and compared against performance criteria established under the National Oil and Hazardous Substances Pollution Contingency Plan and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). On the basis of these evaluations, an alternative employing phytoremediation in conjunction with seasonal groundwater extraction and treatment by spray irrigation was recommended by the CCC/USDA to permanently reduce the carbon tetrachloride contaminant levels in groundwater and surface water at the site. The proposed alternative is being implemented in cooperation with the EPA. Under …

The injection and storage of anthropogenic CO2 in deepgeologic formations is a potentially feasible strategy to reduce CO2emissions and atmospheric concentrations. While the purpose of geologiccarbon storage is to trap CO2 underground, CO2 could migrate away fromthe storage site into the shallow subsurface and atmosphere if permeablepathways such as well bores or faults are present. Large-magnitudereleases of CO2 have occurred naturally from geologic reservoirs innumerous volcanic, geothermal, and sedimentary basin settings. Carbondioxide and natural gas have also been released from geologic CO2reservoirs and natural gas storage facilities, respectively, due toinfluences such as well defects and injection/withdrawal processes. Thesesystems serve as natural and industrial analogues for the potentialrelease of CO2 from geologic storage reservoirs and provide importantinformation about the key features, events, and processes (FEPs) that areassociated with releases, as well as the health, safety, andenvironmental consequences of releases and mitigation efforts that can beapplied. We describe a range of natural releases of CO2 and industrialreleases of CO2 and natural gas in the context of these characteristics.Based on this analysis, several key conclusions can be drawn, and lessonscan be learned for geologic carbon storage. First, CO2 can bothaccumulate beneath, and be released from, primary and secondaryreservoirs with capping units located at …

Free weekly newspaper that includes business and classified advertising.

Daily student newspaper from the University of North Texas in Denton, Texas that includes local, state and campus news along with advertising.

None

Magnetic reconnection in the spheromak changes magnetic topology by conversion of injected toroidal flux into poloidal flux and by magnetic surface closure (or opening) in a slowly decaying spheromak. Results from the Sustained Spheromak Physics Experiment, SSPX, are compared with resistive MHD simulations using the NIMROD code. Voltage spikes on the SSPX gun during spheromak formation are interpreted as reconnection across a negative-current layer close to the mean-field x-point. Field lines are chaotic during these events, resulting in rapid electron energy loss to the walls and the low T{sub e} < 50 eV seen in experiment and simulation during strong helicity injection. Closure of flux surfaces (and high T{sub e}) can occur between voltage spikes if they are sufficiently far apart in time; these topology changes are not reflected in the impedance of the axisymmetric gun. Possible future experimental scenarios in SSPX are examined in the presence of the constraints imposed by reconnection physics.

Starting from an accurate inter-atomic potential we develop a simple scheme of generating an ''on-lattice'' molecular potential of short range, which is then incorporated into a lattice Monte Carlo code for simulating size and shape evolution of nanocrystallites. As a specific example, we test such a procedure on the morphological evolution of a molecular crystal of interest to us, e.g., Pentaerythritol Tetranitrate, or PETN, and obtain realistic facetted structures in excellent agreement with experimental morphologies. We investigate several interesting effects including, the evolution of the initial shape of a ''seed'' to an equilibrium configuration, and the variation of growth morphology as a function of the rate of particle addition relative to diffusion.

In this contribution we will describe a technology path to very high quality coatings fabricated in the vacuum of space. To accomplish the ambitious goals set out in NASA's Lunar-Mars proposal, advanced thin-film deposition technology will be required. The ability to deposit thin-film coatings in the vacuum of lunar-space could be extremely valuable for executing this new space mission. Developing lightweight space-based deposition technology (goal:<300 g, including power supply) will enable the future fabrication and repair of flexible large-area space antennae and fixed telescope mirrors for lunar-station observatories. Filtered Cathodic Arc (FCA) is a proven terrestrial energetic thin-film deposition technology that does not need any processing gas but is well suited for ultra-high vacuum operation. Recently, miniaturized cathodic arcs have already been developed and considered for space propulsion. It is proposed to combine miniaturized pulsed FCA technology and robotics to create a robust, enabling space-based deposition system for the fabrication, improvement, and repair of thin films, especially of silver and aluminum, on telescope mirrors and eventually on large area flexible substrates. Using miniature power supplies with inductive storage, the typical low-voltage supply systems used in space are adequate. It is shown that high-value, small area coatings are within the reach …

ConocoPhillips, in conjunction with Nexant Inc., Penn State University, and Cummins Engine Co., joined with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) in a cooperative agreement to perform a comprehensive study of new ultra clean fuels (UCFs) produced from remote sources of natural gas. The project study consists of three primary tasks: an environmental Life Cycle Assessment (LCA), a Market Study, and a series of Engine Tests to evaluate the potential markets for Ultra Clean Fuels. The overall objective of DOE's Ultra Clean Transportation Fuels Initiative is to develop and deploy technologies that will produce ultra-clean burning transportation fuels for the 21st century from both petroleum and non-petroleum resources. These fuels will: (1) Enable vehicles to comply with future emission requirements; (2) Be compatible with the existing liquid fuels infrastructure; (3) Enable vehicle efficiencies to be significantly increased, with concomitantly reduced CO{sub 2} emissions; (4) Be obtainable from a fossil resource, alone or in combination with other hydrocarbon materials such as refinery wastes, municipal wastes, biomass, and coal; and (5) Be competitive with current petroleum fuels. The objectives of the ConocoPhillips Ultra Clean Fuels Project are to perform a comprehensive life cycle analysis and to conduct …

The Electricore/Delphi team continues to leverage the electrochemical planar sensor technology that has produced stoichiometric planar and wide range oxygen sensors as the basis for development of a NOx sensor. Zirconia cell technology with an integrated heater will provide the foundation for the sensor structure. Proven materials and packaging technology will help to ensure a cost-effective approach to the manufacture of this sensor. The electronics technique and interface is considered to be an area where new strategies need to be employed to produce higher S/N ratios of the NOx signal with emphasis on signal stability over time for robustness and durability Both continuous mode and pulse mode control techniques are being evaluated. Packaging the electronics requires careful design and circuit partitioning so that only the necessary signal conditioning electronics are coupled directly in the wiring harness, while the remainder is situated within the ECM for durability and costs reasons. This task continues to be on hold due to the limitation that the definition of the interface electronics was unavailable until very late in the project. The sense element is based on the amperometric method utilizing integrated alumina and zirconia ceramics. Precious metal electrodes are used to form the integrated heater, …

None

A three-dimensional site-scale numerical model has been developed to simulate water and gas flow, heat transfer, and radionuclide transport in the unsaturated zone of Yucca Mountain, Nevada, the American underground repository site for high level radioactive waste. The modeling approach is based on a mathematical formulation of coupled multiphase fluid and heat flow and tracer transport through porous and fractured rock. This model is intended for use in predicting current and future conditions in the unsaturated zone, so as to aid in assessing the system performance of the repository. In particular, an integrated modeling methodology is discussed for integrating a wide variety of moisture, pneumatic, thermal, and isotopic geochemical data into comprehensive modeling analyses. The reliability and accuracy of the model predictions were the subject of a comprehensive model calibration study, in which the model was calibrated against measured data, including liquid saturation, water potential, and temperature. This study indicates that the model is able to reproduce the overall system behavior at Yucca Mountain with respect to moisture profiles, pneumatic pressure and chloride concentration variations in different geological units, and ambient geothermal conditions.

A simple replication of developed country applianceefficiency labels and standards is unlikely to be feasible in Ghana andmany other countries in Africa. Yet by creatively modifying the developedcountry appliance efficiency market transformation model, it should bepossible to achieve dramatic energy use reductions. As was true indeveloped countries in the previous two decades, refrigeration efficiencyimprovements provide the greatest energy savings potential in theresidential electricity sector in Ghana. Although Ghana, like manyAfrican countries may impose standards on imports since Ghana does nothave manufacturing facilities for appliances in country. This approachmay hurt some consumers who patronize a very diverse market of usedappliances imported from Europe. We discuss how meeting the challenges ofthe Ghanaian market will require modification of the usual energyefficiency labeling and standards paradigm. But once a refrigeratormarket transformation is accomplished in Ghana, we estimate an averageenergy savings potential of 550 kWh/refrigerator/year, and a monetarysavings of more than $35/refrigerator/year. We discuss how this modifiedrefrigerator efficiency market transformation may occur in the Ghanaiancontext. If successful, this market transformation is likely to be anexample for many other African countries.

This Nuclear Energy Research Initiative (NERI) project was tasked with exploring, adapting, developing and demonstrating innovative nondestructive test methods to automate nuclear coated particle fuel inspection so as to provide the United States (US) with necessary improved and economical Quality Assurance and Control (QA/QC) that is needed for the fuels for several reactor concepts being proposed for both near term deployment [DOE NE & NERAC, 2001] and Generation IV nuclear systems. Replacing present day QA/QC methods, done manually and in many cases destructively, with higher speed automated nondestructive methods will make fuel production for advanced reactors economically feasible. For successful deployment of next generation reactors that employ particle fuels, or fuels in the form of pebbles based on particles, extremely large numbers of fuel particles will require inspection at throughput rates that do not significantly impact the proposed manufacturing processes. The focus of the project is nondestructive examination (NDE) technologies that can be automated for production speeds and make either: (I) On Process Measurements or (II) In Line Measurements. The inspection technologies selected will enable particle “quality” qualification as a particle or group of particles passes a sensor. A multiple attribute dependent signature will be measured and used for qualification …