Absolute line emission cross sections are presented for 1 keV/amu charge exchange collisions of multiply charged solar wind ions with H{sub 2}O, H, O, CO{sub 2}, and CO cometary targets. The present calculations are contrasted with available laboratory data. A parameter-free model is used to successfully predict the recently observed x-ray spectra of comet C/LINEAR 1999 S4. We show that the resulting spectrum is extremely sensitive to the time variations of the solar wind composition. Our results suggest that orbiting x-ray satellites may be a viable way to predict the solar wind intensities and composition on the Earth many hours before the ions reach the earth.

None

The project proposal was approved for only the phase I period. The goal for this Phase I project was to develop an industrial model that can perform continuous and efficient dewatering of fine coal slurries of the previous flotation process to fine coal cake of {approx}15% water content from 50-70%. The feasibility of this model should be demonstrated experimentally using a lab scale setup. The Phase I project was originally for one year, from May 2005 to May 2006. With DOE approval, the project was extended to Dec. 2006 without additional cost from DOE to accomplish the work. Water has been used in mining for a number of purposes such as a carrier, washing liquid, dust-catching media, fire-retardation media, temperature-control media, and solvent. When coal is cleaned in wet-processing circuits, waste streams containing water, fine coal, and noncombustible particles (ash-forming minerals) are produced. In many coal preparation plants, the fine waste stream is fed into a series of selection processes where fine coal particles are recovered from the mixture to form diluted coal fine slurries. A dewatering process is then needed to reduce the water content to about 15%-20% so that the product is marketable. However, in the dewatering process …

We report on recent developments with the Purgatorio code, a new implementation of Liberman's Inferno model. This fully relativistic average atom code uses phase shift tracking and an efficient refinement scheme to provide an accurate description of continuum states. The resulting equations of state accurately represent the atomic shell-related features which are absent in Thomas-Fermi-based approaches. We discuss various representations of the exchange potential and some of the ambiguities in the choice of the effective charge Z* in average atom models, both of which affect predictions of electrical conductivities and radiative properties.

Fluidized Bed Steam Reforming (FBSR) is being considered as an alternative technology for the immobilization of a wide variety of aqueous high sodium containing radioactive wastes at various DOE facilities in the United States. The addition of clay, charcoal, and a catalyst as co-reactants converts aqueous Low Activity Wastes (LAW) to a granular or ''mineralized'' waste form while converting organic components to CO{sub 2} and steam, and nitrate/nitrite components, if any, to N{sub 2}. The waste form produced is a multiphase mineral assemblage of Na-Al-Si (NAS) feldspathoid minerals with cage-like structures that atomically bond radionuclides like Tc-99 and anions such as SO{sub 4}, I, F, and Cl. The granular product has been shown to be as durable as LAW glass. Shallow land burial requires that the mineralized waste form be able to sustain the weight of soil overburden and potential intrusion by future generations. The strength requirement necessitates binding the granular product into a monolith. FBSR mineral products were formulated into a variety of monoliths including various cements, Ceramicrete, and hydroceramics. All but one of the nine monoliths tested met the <2g/m{sup 2} durability specification for Na and Re (simulant for Tc-99) when tested using the Product Consistency Test (PCT; …

The non-equilibrium dynamics of mixing, oscillations and equilibration is studied in a field theory of flavored neutral mesons that effectively models two flavors of mixed neutrinos, in interaction with other mesons that represent a thermal bath of hadrons or quarks and charged leptons. This model describes the general features of neutrino mixing and relaxation via charged currents in a medium. The reduced density matrix and the non-equilibrium effective action that describes the propagation of neutrinos is obtained by integrating out the bath degrees of freedom. We obtain the dispersion relations, mixing angles and relaxation rates of ``neutrino'' quasiparticles. The dispersion relations and mixing angles are of the same form as those of neutrinos in the medium, and the relaxation rates are given by $\Gamma_1(k) = \Gamma_{ee}(k) \cos^2\theta_m(k)+\Gamma_{\mu\mu}(k)\sin^2\theta_m(k); \Gamma_2(k)= \Gamma_{\mu\mu}(k) \cos^2\theta_m(k)+\Gamma_{ee}(k)\sin^2\theta_m(k) $ where $\Gamma_{\alpha\alpha}(k)$ are the relaxation rates of the flavor fields in \emph{absence} of mixing, and $\theta_m(k)$ is the mixing angle in the medium. A Weisskopf-Wigner approximation that describes the asymptotic time evolution in terms of a non-hermitian Hamiltonian is derived. At long time $>>\Gamma^{-1}_{1,2}$ ``neutrinos'' equilibrate with the bath. The equilibrium density matrix is nearly diagonal in the basis of eigenstates of an \emph{effective Hamiltonian that includes self-energy corrections …

Ablative targets for the National Ignition Campaign (NIC) have been fabricated by sputter coating spherical mandrels made of glow discharge polymer (GDP) with graded copper doped beryllium (Be) layers. The inner mandrel must be completely removed to meet specific ignition design requirements. The process of removing the mandrel requires elevated temperature in the presence of oxygen. However, elevating the temperature in air also oxidizes the Be and can cause blistering on the inner surface of the Be shell. This paper will discuss a refined technique, which removes the GDP mandrel without compromising the integrity of the inner Be surface. The oxygen gradient that develops during the mandrel removal and the impact of its presence will also be discussed.

This report summarizes the study of the tolerance limits on the assembly of the cathode and the Pierce electrode for the DARHT-II diode (2.5 MV, 2 kA case), performed through a series of computer simulations using the PIC code WARP [1]. We have considered sources of beam quality degradation like the errors in axial and transverse positioning, and the size of the radial gap between the cathode and the Pierce electrode (shroud). The figure of merit was chosen to be the RMS beam (edge) emittance at a distance of 1 meter from the cathode, as defined by {var_epsilon}{sub x} = 4 {beta}{gamma} {radical}(<x{sup 2}><x{prime}{sup 2}>-<xx{prime}>{sup 2}) {center_dot}. The analysis shows that to position the cathode at the correct axial and transverse location is more important than the size of the radial gap.

Uranium-lead ratios (commonly represented as {sup 238}U/{sup 204}Pb = {mu}) calculated for the sources of martian basalts preserve a record of petrogenetic processes that operated during early planetary differentiation and formation of martian geochemical reservoirs. To better define the range of {mu} values represented by the source regions of martian basalts, we completed U-Pb elemental and isotopic analyses on whole rock, mineral and leachate fractions from the martian meteorite Queen Alexandra Range 94201 (QUE 94201). The whole rock and silicate mineral fractions have unradiogenic Pb isotopic compositions that define a narrow range ({sup 206}Pb/{sup 204}Pb = 11.16-11.61). In contrast, the Pb isotopic compositions of weak HCl leachates are more variable and radiogenic. The intersection of the QUE 94201 data array with terrestrial Pb in {sup 206}Pb/{sup 204}Pb-{sup 207}Pb/{sup 204}Pb-{sup 208}Pb/{sup 204}Pb compositional space is consistent with varying amounts of terrestrial contamination in these fractions. We calculate that only 1-7% contamination is present in the purified silicate mineral and whole rock fractions, whereas the HCl leachates contain up to 86% terrestrial contamination. Despite the contamination, we are able to use the U-Pb data to determine the initial {sup 206}Pb/{sup 204}Pb of QUE 94201 (11.086 {+-} 0.008) and calculate the {mu} value …

We performed a computational and experimental analysis of fast cookoff of LX-10 (94.7% HMX, 5.3% Viton A) confined in a 2 kbar steel tube with reinforced end caps. A Scaled-Thermal-Explosion-eXperiment (STEX) was completed in which three radiant heaters were used to heat the vessel until ignition, resulting in a moderately violent explosion after 20.4 minutes. Thermocouple measurements showed tube temperatures as high as 340 C at ignition and LX-10 surface temperatures as high as 279 C, which is near the melting point of HMX. Three micro-power radar systems were used to measure mean fragment velocities of 840 m/s. Photonics Doppler Velocimeters (PDVs) showed a rapid acceleration of fragments over 80 {micro}s. A one-dimensional ALE3D cookoff model at the vessel midplane was used to simulate the heating, thermal expansion, LX-10 decomposition composition, and closing of the gap between the HE (High Explosive) and vessel wall. Although the ALE3D simulation terminated before ignition, the model provided a good representation of heat transfer through the case and across the dynamic gap to the explosive.

The 'Computational Crystallography Toolbox' (cctbx, http://cctbx.sourceforge.net/) is the open-source component of the Phenix project (http://www.phenix-online.org/). Most recent cctbx developments are geared towards supporting new features of the phenix.refine application. Thus, the open-source mmtbx (macromolecular toolbox) module is currently being most rapidly developed. In this article we give an overview of some of the recent developments. However, the main theme of this article is the presentation of a light-weight example command-line application that was specifically developed for this newsletter: sequence alignment and superposition of two molecules read from files in PDB format. This involves parameter input based on the Phil module presented in Newsletter No. 5, fast reading of the PDB files with the new iotbx.pdb.input class, simple sequence alignment using the new mmtbx.alignment module, and use of the Kearsley (1989) superposition algorithm to find the least-squares solution for superposing C-alpha positions. The major steps are introduced individually, followed by a presentation of the complete application. The example application is deliberately limited in functionality to make it concise enough for this article. The main goal is to show how the open-source components are typically combined into an application. Even though the example is quite specific to macromolecular crystallography, we believe it …

The goal of this proposal was to test the hypothesis that mice heterozygous for the Nijmegen Breakage Syndrome (NBS1) gene are genetically susceptible to low doses of ionizing radiation. The rationale for this is that patients with NBS are radiation sensitive, because of defects in cellular responses to radiation induced genetic damage and haploinsufficiency at this genetic locus provides the potential for genetic susceptibility to low doses of ionizing radiation. Wild type and heterozygous NBS1 mice were irradiated and followed over their lifetime for radiation induced genomic instability, carcinogenesis and non-specific life shortening. No differences in cytogenetic damage, cancer induction or life span were observed between the hypomorphic mice indicating that genetic imbalance at the NBS1 loci does not modulate low dose radiation sensitivity.

Hydrothermally self-advancing hybrid coatings were prepared by blending two starting materials, water-borne styrene acrylic latex (SAL) as the matrix and calcium aluminate cement (CAC) as the hydraulic filler, and then their usefulness was evaluated as the room temperature curable anti-corrosion coatings for carbon steel in CO{sub 2}-laden geothermal environments at 250 C. The following two major factors supported the self-improving mechanisms of the coating during its exposure in an autoclave: First was the formation of a high temperature stable polymer structure of Ca-complexed carboxylate groups containing SAL (Ca-CCG-SAL) due to hydrothermal reactions between SAL and CAC; second was the growth with continuing exposure time of crystalline calcite and boehmite phases coexisting with Ca-CCG-SAL. These two factors promoted the conversion of the porous microstructure in the non-autoclaved coating into a densified one after 7 days exposure. The densified microstructure not only considerably reduced the conductivity of corrosive ionic electrolytes through the coatings' layers, but also contributed to the excellent adherence of the coating to underlying steel' s surface that, in turn, retarded the cathodic oxygen reduction reaction at the corrosion site of steel. Such characteristics including the minimum uptake of corrosive electrolytes by the coating and the retardation of the cathodic …

MicrobeWorld is a 90-second feature broadcast daily on more than 90 public radio stations and available from several sources as a podcast, including www.microbeworld.org. The feature has a strong focus on the use and adapatbility of microbes as alternative sources of energy, in bioremediation, their role in climate, and especially the many benefits and scientific advances that have resulting from decoding microbial genomes. These audio features are permanantly archived on an educational outreach site, microbeworld.org, where they are linked to the National Science Education Standards. They are also being used by instructors at all levels to introduce students to the multiple roles and potential of microbes, including a pilot curriculum program for middle-school students in New York.

Ge nanocrystals are formed in silica by ion beam synthesis and are subsequently exposed by selective HF etching of the silica. Under ambient conditions, the exposed nanocrystals are stable after formation of a protective native oxide shell of no more than a few monolayers. However, under visible laser illumination at room temperature and in the presence of O{sub 2}, the nanocrystals rapidly oxidize. The oxidation rate was monitored by measuring the Raman spectra of the Ge nanocrystals in-situ. The intensity ratio of the anti-Stokes to the Stokes line indicated that no significant laser-induced heating of illuminated nanocrystals occurs. Therefore, the oxidation reaction rate enhancement is due to a photo-chemical process. The oxidation rate varies nearly linearly with the logarithm of the laser intensity, and at constant laser intensity the rate increases with increasing photon energy. These kinetic measurements, along with the power dependencies, are described quantitatively by an electron active oxidation mechanism involving tunneling of optically excited electrons through the forming oxide skin and subsequent transport of oxygen ions to the Ge nanocrystal surface.

This document provides specifications for selected system components of the Transportation, Aging and Disposal (TAD) canister-based system. A list of system specified components and ancillary components are included in Section 1.2. The TAD canister, in conjunction with specialized overpacks will accomplish a number of functions in the management and disposal of spent nuclear fuel. Some of these functions will be accomplished at purchaser sites where commercial spent nuclear fuel (CSNF) is stored, and some will be performed within the Office of Civilian Radioactive Waste Management (OCRWM) transportation and disposal system. This document contains only those requirements unique to applications within Department of Energy's (DOE's) system. DOE recognizes that TAD canisters may have to perform similar functions at purchaser sites. Requirements to meet reactor functions, such as on-site dry storage, handling, and loading for transportation, are expected to be similar to commercially available canister-based systems. This document is intended to be referenced in the license application for the Monitored Geologic Repository (MGR). As such, the requirements cited herein are needed for TAD system use in OCRWM's disposal system. This document contains specifications for the TAD canister, transportation overpack and aging overpack. The remaining components and equipment that are unique to the …

Bromide and resting-cell bacteria tracer tests carried out in a sand and gravel aquifer at the USGS Cape Cod site in 1987 were reinterpreted using a three-dimensional stochastic approach and Lagrangian particle tracking numerical methods. Bacteria transport was strongly coupled to colloid filtration through functional dependence of local-scale colloid transport parameters on hydraulic conductivity and seepage velocity in a stochastic advection-dispersion/attachment-detachment model. Information on geostatistical characterization of the hydraulic conductivity (K) field from a nearby plot was utilized as input that was unavailable when the original analysis was carried out. A finite difference model for groundwater flow and a particle-tracking model of conservative solute transport was calibrated to the bromide-tracer breakthrough data using the aforementioned geostatistical parameters. An optimization routine was utilized to adjust the mean and variance of the lnK field over 100 realizations such that a best fit of a simulated, average bromide breakthrough curve is achieved. Once the optimal bromide fit was accomplished (based on adjusting the lnK statistical parameters in unconditional simulations), a stochastic particle-tracking model for the bacteria was run without adjustments to the local-scale colloid transport parameters. Good predictions of the mean bacteria breakthrough data were achieved using several approaches for modeling components of …

This conference's focus was the peaceful uses of the atom and their implications for nuclear science, energy security, nuclear medicine and national security. The conference also provided the setting for the presentation of the prestigious Enrico Fermi Prize, a Presidential Award which recognizes the contributions of distinguished members of the scientific community for a lifetime of exceptional achievement in the science and technology of nuclear, atomic, molecular, and particle interactions and effects. An impressive group of distinguished speakers addressed various issues that included: the impact and legacy of the Eisenhower Administration’s “Atoms for Peace” concept, the current and future role of nuclear power as an energy source, the challenges of controlling and accounting for existing fissile material, and the horizons of discovery for particle or high-energy physics. The basic goal of the conference was to examine what has been accomplished over the past fifty years as well as to peer into the future to gain insights into what may occur in the fields of nuclear energy, nuclear science, nuclear medicine, and the control of nuclear materials.

Recent years have seen an explosion of interest in the narrow band gap end of the InGaN alloy system, particularly in InN. The existence of surface electron accumulation and a tendency for n-type conductivity have been well-established and are explained by an extremely large electron affinity and the location of the Fermi level stabilization energy (E{sub FS}) high in the conduction band [1]. These characteristics pose significant challenges to the integration of In-rich InGaN into devices and demonstrate the need for a better understanding of the relationship between native defects and electronic transport in the alloy system. It has been previously shown that high-energy particle irradiation can predictably control the electronic properties of In-rich InGaN [1]. With increasing irradiation dose, the electron concentration (n) increases and the electron mobility ({mu}) decreases until the Fermi level reaches E{sub FS}, which is the saturation point. The value of n at saturation decreases with decreasing In fraction, due to the raising of the conduction band edge with respect to E{sub FS}.

For the fourth quarter ARM metric we will make use of new liquid water data that has become available, and called the 'Microbase' value added product (referred to as OBS, within the text) at three sites: the North Slope of Alaska (NSA), Tropical West Pacific (TWP) and the Southern Great Plains (SGP) and compare these observations to model forecast data. Two time periods will be analyzed March 2000 for the SGP and October 2004 for both TWP and NSA. The Microbase data have been averaged to 35 pressure levels (e.g., from 1000hPa to 100hPa at 25hPa increments) and time averaged to 3hourly data for direct comparison to our model output.

It is important to recognize the presence of Non-Aqueous Phase Liquids (NAPLs) in soils at a waste site in order to design and construct a successful remediation system. NAPLs often manifest as a complex, multi-component mixture of organic compounds that can occur in environmental media, such as vadose zone soil, where the mixture will partition and equilibrate with soil particles, pore vapor, and pore water. Complex organic mixtures can greatly complicate the determination and quantification of NAPL in soil due to inter-media transfer. NAPL thresholds can also change because of mixture physical properties and can disguise the presence of NAPL. A unique analytical method and copyrighted software have been developed at the Department of Energy's Savannah River Site that facilitates solution of this problem. The analytical method uses a classic chemistry approach and applies the principals of solubility limit theory, Raoult's Law, and equilibrium chemistry to derive an accurate estimation of NAPL presence and quantity. The method is unique because it calculates an exact result that is mass balanced for each physical state, chemical mixture component, and mixture characteristics. The method is also unique because the solution can be calculated on both a wet weight and dry weight basis--a factor …

The U.S. Department of Energy’s Pacific Northwest National Laboratory just completed a multi-year project to develop a fully tested and documented atmospheric dispersion modeling system (DUST TRANsport or DUSTRAN) to assist the U.S. Department of Defense in addressing particulate air quality issues at military training and testing ranges. This manual documents the DUSTRAN modeling system and includes installation instructions, a user’s guide, and detailed example tutorials.

None

Recently Ciuchini, Pierini and Silvestrini proposed a method for constraining CKM parameters in B {yields} K{pi}{pi} and B{sub s} {yields} K{pi}{pi} through phase measurements of amplitudes involving I = 3/2 K*{pi} final states. We show that complementary information on CKM parameters may be obtained by studying the phases of {Delta}I = 1 B {yields} (K*{pi}){sub I = 1/2}, B{sub s} {yields} (K* {bar K}){sub l=1} and B{sub s} {yields} ({bar K}* K){sub I=1} amplitudes. Hadronic uncertainties in these constraints from electroweak penguin operators O{sub 9} and O{sub 10}, studied using flavor SU(3), are shown to be very small in B {yields} K{pi}{pi} and B{sub s} {yields} K{pi}{pi} and somewhat larger in B{sub s} {yields} K{bar K}{pi}. The first processes imply a precise linear relation between {bar {rho}} and {bar {eta}}, with a measurable slope and an intercept at {bar {eta}} = 0 involving a theoretical error of 0.03. The decays B{sub s} {yields} K{pi}{pi} permit a measurement of involving a theoretical error below a degree. We note that while time-dependence is required when studying B{sup 0} decays at the {Upsilon}(4S), it is not needed when studying B{sub s} decays at hadronic colliders.