This presentation discusses the Web-at-Risk project and the issues related to capturing and preserving web resources. It introduces collection development issues, organization and metadata issues, and the findings that support the needs for a web archiving service.

We describe a domain decomposition algorithm for use in several variants of the parallel adaptive meshing paradigm of Bank and Holst. This algorithm has low communication, makes extensive use of existing sequential solvers, and exploits in several important ways data generated as part of the adaptive meshing paradigm. We show that for an idealized version of the algorithm, the rate of convergence is independent of both the global problem size N and the number of subdomains p used in the domain decomposition partition. Numerical examples illustrate the effectiveness of the procedure.

As the world moves into the 21st century, the possibility of greater reliance on nuclear energy will impose additional technical requirements to prevent proliferation. In addition to proliferation resistant reactors, a careful examination of the various possible fuel cycles from cradle to grave will provide additional technical and nonproliferation challenges in the areas of conversion, enrichment, transportation, recycling and waste disposal. Radiation detection technology and information management have a prominent role in any future global regime for nonproliferation. As nuclear energy and hence nuclear materials become an increasingly global phenomenon, using local technologies and capabilities facilitate incorporation of enhanced monitoring and detection on the regional level. Radiation detection technologies are an important tool in the prevention of proliferation and countering radiological/nuclear terrorism. A variety of new developments have enabled enhanced performance in terms of energy resolution, spatial resolution, passive detection, predictive modeling and simulation, active interrogation, and ease of operation and deployment in the field. For example, various gamma ray imaging approaches are being explored to combine spatial resolution with background suppression in order to enhance sensitivity many-fold at reasonable standoff distances and acquisition times. New materials and approaches are being developed in order to provide adequate energy resolution in …

Ge Blocked Impurity Band (BIB) photoconductors have the potential to replace stressed Ge:Ga photoconductors for far-infrared astronomical observations. A novel planar BIB device has been fabricated in which ion-implanted boron is used to form the blocking and absorbing layers of necessary purity and compensation. The effect of doping in the infrared active layer on the far-infrared photoconductive response has been studied, and the optimum doping concentration is found to be {approx} 4 x 10{sup 16} cm{sup -3}. Devices doped near this concentration show good blocking characteristics with low dark currents. The spectral response extends to {approx} 45 cm{sup -1}, clearly showing the formation of an impurity band. Under low background testing conditions these devices attain a responsivity of 0.12 A/W and NEP of 5.23 x 10{sup -15} W/Hz{sup -1/2}.

The accurate detection and removal of insect clutter from millimeter wavelength cloud radar (MMCR) returns is of high importance to boundary layer cloud research (e.g., Geerts et al., 2005). When only radar Doppler moments are available, it is difficult to produce a reliable screening of insect clutter from cloud returns because their distributions overlap. Hence, screening of MMCR insect clutter has historically involved a laborious manual process of cross-referencing radar moments against measurements from other collocated instruments, such as lidar. Our study looks beyond traditional radar moments to ask whether analysis of recorded Doppler spectra can serve as the basis for reliable, automatic insect clutter screening. We focus on the MMCR operated by the Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) program at its Southern Great Plains (SGP) facility in Oklahoma. Here, archiving of full Doppler spectra began in September 2003, and during the warmer months, a pronounced insect presence regularly introduces clutter into boundary layer returns.

We present an arbitrary Lagrangian-Eulerian (ALE) discretization of the equations of resistive magnetohydrodynamics (MHD) on unstructured hexahedral grids. The method is formulated using an operator-split approach with three distinct phases: electromagnetic diffusion, Lagrangian motion, and Eulerian advection. The resistive magnetic dynamo equation is discretized using a compatible mixed finite element method with a 2nd order accurate implicit time differencing scheme which preserves the divergence-free nature of the magnetic field. At each discrete time step, electromagnetic force and heat terms are calculated and coupled to the hydrodynamic equations to compute the Lagrangian motion of the conducting materials. By virtue of the compatible discretization method used, the invariants of Lagrangian MHD motion are preserved in a discrete sense. When the Lagrangian motion of the mesh causes significant distortion, that distortion is corrected with a relaxation of the mesh, followed by a 2nd order monotonic remap of the electromagnetic state variables. The remap is equivalent to Eulerian advection of the magnetic flux density with a fictitious mesh relaxation velocity. The magnetic advection is performed using a novel variant of constrained transport (CT) that is valid for unstructured hexahedral grids with arbitrary mesh velocities. The advection method maintains the divergence free nature of the …

Email from Betty J. Brown in support of hiring Sherry Ringler to be the executive director of the WASP organization.

When generating a mesh for the initial conditions for a computer simulation, you want the mesh to be as smooth as possible. A common practice is to use equipotential mesh relaxation to smooth out a distorted computational mesh. Typically a Laplace-like equation is set up for the mesh coordinates and then one or more Jacobi iterations are performed to relax the mesh. As the zone count gets really large, the Jacobi iteration becomes less and less effective and we are stuck with our original unrelaxed mesh. This type of iteration can only damp high frequency errors and the smooth errors remain. When the zone count is large, almost everything looks smooth so relaxation cannot solve the problem. In this paper we examine a multigrid technique which effectively smooths out the mesh, independent of the number of zones.

The first experimental campaign for ignition, beginning in 2010 after NIF construction and commissioning are completed, will include experiments to measure and optimize key laser and target conditions necessary for ignition. These ''tuning campaigns'' will precede the first ignition shots. Ignition requires acceptable target performance in several key areas: Energetics, Symmetry, Shock timing, and Capsule Hydrodynamics. Detailed planning and simulations for ''tuning campaigns'' in each of these areas is currently underway, as part of the National Ignition Campaign (NIC) Program. Tuning and diagnostic methods are being developed and tested on present facilities, including the Omega laser at the Laboratory for Energetics (LLE), the Z facility at Sandia National Laboratories (SNL), and the Trident laser at Los Alamos National Laboratory (LANL).

The coordination chemistry of plutonium remains relatively unexplored. Thus, the fundamental coordination chemistry of plutonium is being studied using simple multi-dentate ligands with the intention that the information gleaned from these studies may be used in the future to develop plutonium-specific sequestering agents. Towards this goal, hard Lewis-base donors are used as model ligands. Maltol, an inexpensive natural product used in the commercial food industry, is an ideal ligand because it is an all-oxygen bidentate donor, has a rigid structure, and is of small enough size to impose little steric strain, allowing the coordination preferences of plutonium to be the deciding geometric factor. Additionally, maltol is the synthetic precursor of 3,4-HOPO, a siderophore-inspired bidentate moiety tested by us previously as a possible sequestering agent for plutonium under acidic conditions. As comparisons to the plutonium structure, Ce(IV) complexes of the same and related ligands were examined as well. Cerium(IV) complexes serve as good models for plutonium(IV) structures because Ce(IV) has the same ionic radius as Pu(IV) (0.94 {angstrom}). Plutonium(IV) maltol crystals were grown out of a methanol/water solution by slow evaporation to afford red crystals that were evaluated at the Advanced Light Source at Lawrence Berkeley National Laboratory using single crystal …

The National Compact Stellarator Experiment (NCSX) is a three-field period compact stellarator presently in the construction phase at Princeton, NJ. The design parameters of the device are major radius R=1.4m, average minor radius <a> = 0.32m, 1.2 {le} toroidal field (B{sub t}) {le} 1.7 T, and auxiliary input power up to 12 MW with neutral beams and radio-frequency heating. The NCSX average aspect ratio <R/a> of 4.4 lies well below present stellarator experiments and designs, enabling the investigation of high {beta} physics in a compact stellarator geometry. Also the NCSX design choice for a quasi-axisymmetric configuration aims toward the achievement of tokamak-like transport. In this paper, we report on the magnetic field line tracing calculations used to evaluate conceptual plasma facing component (PFC) designs. In contrast to tokamaks, axisymmetric target plates are not required to intercept the majority of the heat flux in stellarators, owing to the nature of the 3-D magnetic field footprint. The divertor plate design investigated in this study covers approximately one half of the toroidal extent in each period. Typical Poincare plots in Figure 1 illustrate the plasma cross-section at several toroidal angles for a computed NCSX high-beta equilibrium. The plates used for these calculations are …

The ILC Marx Modulator Development Program at SLAC is working towards developing a full-scale ILC Marx ''Reference Design'' modulator prototype, with the goal of significantly reducing the size and cost of the ILC modulator while improving overall modulator efficiency and availability. The ILC Reference Design prototype will provide a proof-of-concept model to industry in advance of Phase II SBIR funding, and also allow operation of the new 10MW L-Band Klystron prototypes immediately upon their arrival at SLAC.

Weighted essentially non-oscillatory (WENO) simulations of the reshocked two-dimensional single-mode Richtmyer-Meshkov instability using third-, fifth- and ninth-order spatial flux reconstruction and uniform grid resolutions corresponding to 128, 256 and 512 points per initial perturbation wavelength are presented. The dependence of the density, vorticity, simulated density Schlieren and baroclinic production fields, mixing layer width, circulation deposition, mixing profiles, production and mixing fractions, energy spectra, statistics, probability distribution functions, numerical turbulent kinetic energy and enstrophy production/dissipation rates, numerical Reynolds numbers, and numerical viscosity on the order and resolution is investigated to long evolution times. The results are interpreted using the implicit numerical dissipation in the characteristic projection-based, finite-difference WENO method. It is shown that higher order higher resolution simulations have lower numerical dissipation. The sensitivity of the quantities considered to the order and resolution is further amplified following reshock, when the energy deposition by the second shock-interface interaction induces the formation of small-scale structures. Lower-order lower-resolution simulations preserve large-scale structures and flow symmetry to late times, while higher-order higher-resolution simulations exhibit fragmentation of the structures, symmetry breaking and increased mixing. Similar flow features are qualitatively and quantitatively captured by either approximately doubling the order or the resolution. Additionally, the computational scaling shows …

None

This report provides a summary on implementing the Clean Water Act. This report replaces CRS Issue Brief IB89102, "Water Quality: Implementing the Clean Water Act," by Claudia Copeland.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

None

This report provides an overview of the Clean Water Act issues in the 109th Congress.

None

This report overviews about several federal programs and initiatives that have been created to address the problems of children who witness domestic violence, and several new initiatives have been enacted in the 109th congress.

This report analysis Brazil's political, economic, and social conditions, and how those conditions affect its role in the world and its relationship with the United States.

None

None

The National Museum of the Pacific War presents an interview with Ollie Schaetter. Schaetter shares some of his family history of their funeral home in Fredericksburg, Texas. He joined the Navy in December of 1943. In California he worked in the Chief Master at Arms office on the US Navy Hospital staff. Beginning in December of 1944 he served as Pharmacist’s Mate 3rd Class aboard the USS Goshen (APA-108). They traveled to the Marshall Islands, Okinawa and Guadalcanal. He worked for 6 months in the surgery department in the Philippines. He was discharged in April of 1945.