Pendeo-epitaxy has been applied to nonpolar a-plane GaN layers in order to observe if such process will lead to defect reduction in comparison with direct growth on this plane. Uncoalesced and coalesced a-plane GaN layers with thicknesses 2{micro}m and 12{micro}m, respectively have been studied by conventional and high resolution electron microscopy. The following structural defects have been observed in pendeo-epitaxial layers: (1) basal stacking faults, (2) threading dislocations and (3) prismatic stacking faults. Drastic decrease of threading dislocation density and stacking faults have been observed in 'wing' areas with respect to 'seed' areas. Cross-section images reveal cracks and voids at the areas where two coalesced wings meet each other. High resolution electron microscopy shows that the majority of stacking faults are low-energy planar defects of the types I{sub 1}, I{sub 2} and I{sub 3}. The I{sub 3} type basal stacking fault, predicted theoretically, has been observed experimentally for the first time.

This paper extends previous results on nonlinear Schwarz preconditioning ([4]) to unstructured finite element elliptic problems exploiting now nonlocal (but small) subspaces. The non-local finite element subspaces are associated with subdomains obtained from a non-overlapping element partitioning of the original set of elements and are coarse outside the prescribed element subdomain. The coarsening is based on a modification of the agglomeration based AMGe method proposed in [8]. Then, the algebraic construction from [9] of the corresponding non-linear finite element subproblems is applied to generate the subspace based nonlinear preconditioner. The overall nonlinearly preconditioned problem is solved by an inexact Newton method. Numerical illustration is also provided.

Worldwide data on terrorist incidents between 1968 and 2004 gathered by the RAND corporation and the Oklahoma City National Memorial Institute for the Prevention of Terrorism (MIPT) were assessed for patterns and trends in morbidity/mortality. Adjusted data analyzed involve a total of 19,828 events, 7,401 ''adverse'' events (each causing {ge}1 victim), and 86,568 ''casualties'' (injuries) of which 25,408 were fatal. Most terror-related adverse events, casualties and deaths involved bombs and guns. Weapon-specific patterns and terror-related risk levels in Israel (IS) have differed markedly from those of all other regions combined (OR). IS had a fatal fraction of casualties about half that of OR, but has experienced relatively constant lifetime terror-related casualty risks on the order of 0.5%--a level 2 to 3 orders of magnitude more than those experienced in OR that increased {approx}100-fold over the same period. Individual event fatality has increased steadily, the median increasing from 14 to 50%. Lorenz curves obtained indicate substantial dispersion among victim/event rates: about half of all victims were caused by the top 2.5% (or 10%) of harm-ranked events in OR (or IS). Extreme values of victim/event rates were approximated fairly well by generalized Pareto models (typically used to fit to data on forest …

The energy systems we have enjoyed for the last 100 years has resulted in the advanced standard of living in the developed world and a major emerging problem with climate change. Now we face a simultaneous realization that our reliance on fossil fuels is a source of conflict and economic disruption as well as causing potentially catastrophic global climate change. It is time to give serious thought to how to collectively solve this problem. Collective action is critical since individual effort by one or only a few nations cannot adequately address the issue.

The Homeland-Defense Operational Planning System (HOPS), is a new operational planning tool leveraging Lawrence Livermore National Laboratory's expertise in weapons systems and in sparse information analysis to support the defense of the U.S. homeland. HOPS provides planners with a basis to make decisions to protect against acts of terrorism, focusing on the defense of facilities critical to U.S. infrastructure. Criticality of facilities, structures, and systems is evaluated on a composite matrix of specific projected casualty, economic, and sociopolitical impact bins. Based on these criteria, significant unidentified vulnerabilities are identified and secured. To provide insight into potential successes by malevolent actors, HOPS analysts strive to base their efforts mainly on unclassified open-source data. However, more cooperation is needed between HOPS analysts and facility representatives to provide an advantage to those whose task is to defend these facilities. Evaluated facilities include: refineries, major ports, nuclear power plants and other nuclear licensees, dams, government installations, convention centers, sports stadiums, tourist venues, and public and freight transportation systems. A generalized summary of analyses of U.S. infrastructure facilities will be presented.

None

None

Breakout (wall failure) of boreholes within the earth can take several forms depending upon physical properties of the surrounding rock and the stress and flow conditions. Three distinctive modes of breakout are (I) extensile breakout observed in brittle rocks (e.g., Haimson and Herrick, 1986), (II) shear breakout in soft and clastic rocks (Zoback et al., 1985), and (III) fracture-like, slot-shaped breakout within highly porous granular rocks (Bessinger et al., 1997; Haimson and Song, 1998). During fluid production and injection within weakly cemented high-porosity rocks, the third type of failure could result in sustained and excessive sand production (disintegration of the rock's granular matrix and debris production). An objective of this research is to investigate the physical conditions that result in the formation of slot-shaped borehole breakout, via laboratory experiments. Our laboratory borehole breakout experiment was conducted using synthetic high-porosity sandstone with controlled porosity and strength. Block samples containing a single through-goring borehole were subjected to anisotropic stresses within a specially designed tri-axial loading cell. A series of studies was conducted to examine the impact of (1) stress anisotropy around the borehole, (2) rock strength, and (3) fluid flow rate within the borehole on the formation of slot-shaped borehole breakout. The …

The coefficients of the KL mix model were set by Dimonte to match RT and RM instabilities as measured on the Linear Electric Motor (LEM). The KL mix model has been applied to directly-driven capsule implosions with a variety of laser energies, ablator materials, ablator thicknesses and convergence ratios. The KL calculations nearly match the observed Y{sub DD}, Y{sub DT}, Y{sub P}, T{sub ion} and implosion times for many (but not all) capsules.

None

Adoption of hydrogen (H{sub 2}) vehicles has been advocated for decades as an ecological ideal, capable of eliminating petroleum consumption as well as tail-pipe air pollution and carbon dioxide (CO{sub 2}) from automobiles. Storing sufficient hydrogen fuel onboard still remains a great technological challenge, despite recent advances in lightweight automotive materials, hybrid-electric drivetrains and fuel cells enabling 60-100 mpg equivalent H{sub 2}-fueled automobiles. Future onboard hydrogen storage choices will be pivotal, with lasting strategic consequences for the eventual scale, shape, security, investment requirements, and energy intensity of the H{sub 2} refueling infrastructure, in addition to impacts on automotive design, cost, range, performance, and safety. Multiple hydrogen storage approaches have been examined and deployed onboard prototype automobiles since the 1970's. These include storing H{sub 2} as a cryogenic liquid (LH{sub 2}) at temperatures of 20-25 Kelvin, compressing room temperature H{sub 2} gas to pressures as high as 10,000 psi, and reversible chemical absorption storage within powdered metal hydrides (e.g. LaNi{sub 5}H{sub 6}, TiFeH{sub 2}, MgH{sub 2}, NaAlH{sub 4}) which evolve H{sub 2} when warmed. Each of these approaches face well-known fundamental physical limits (thermal endurance, volume, and weight, respectively). This report details preliminary experiments investigating the potential of a new approach …

This project aimed to establish feasibility of using experimental techniques based on direct measurements of interaction forces on the single molecule scale to characterize equilibrium interaction potentials between individual biological molecules. Such capability will impact several research areas, ranging from rapid interaction screening capabilities to providing verifiable inputs for computational models. It should be one of the enabling technologies for modern proteomics research. This study used a combination of Monte-Carlo simulations, theoretical considerations, and direct experimental measurements to investigate two model systems that represented typical experimental situations: force-induced melting of DNA rigidly attached to the tip, and force-induced unbinding of a protein-antibody pair connected to flexible tethers. Our results establish that for both systems researchers can use force spectroscopy measurements to extract reliable information about equilibrium interaction potentials. However, the approaches necessary to extract these potentials in each case--Jarzynski reconstruction and Dynamic Force Spectroscopy--are very different. We also show how the thermodynamics and kinetics of unbinding process dictates the choice between in each case.

It is shown that, in a finite beta plasma, there may exist sheath driven modes whose amplitude decreases exponentially with the distance from the divertor plate. The modes are sensitive to the radial tilt of the divertor plate. The short-wavelength branch of the instability, with the cross-field wavelength Dof order of a few ion gyroradii, is present in the case of a ''positive'' tilt of the divertor plate, whereas the long-wavelength branch, with D of order of 10 or so gyroradii is unstable for the opposite sign of the tilt. The parallel e-folding length becomes less than the distance from the plate to the X point (thereby making the mode insensitive to the processes near the X-point and the upper scrape-off layer) at the plasma betas exceeding (2-3) {center_dot} 10{sup -4}. A detailed analysis of the dispersion relations is provided. The features of the modes that can be used for their experimental identification are discussed. It is pointed out that the analog of these modes may also exist in linear plasma devices with shaped end electrodes.

The combination of high-brightness electron sources and high-current SRF Energy Recovery Linacs (ERL) leads to a new emerging technology: High-power, high-brightness electron beams. This technology enables extremely high average power Free-Electron Lasers, a new generation of extreme brightness light sources, electron coolers of high-energy hadron storage rings, polarized electron-hadron colliders of very high luminosity, compact Thomson scattering X-ray sources, terahertz radiation generators and much more. What is typical for many of these applications is the need for very high current, defined here as over 100 mA average current, and high brightness, which is charge dependant, but needs to be in the range of between sub micron up to perhaps 50 microns, usually the lower--the better. Suffice it to say that while there are a number of projects aiming at this level of performance, none is anywhere near it. This work will review the problems associated with the achievement of such performance and the various approaches taken in a number of laboratories around the world to address the issues.

(1,2-naphtho)(1,8-naphtho)thioindigo (PNT) has been synthesized following a simple Friedel-Crafts route and its photochemical properties in toluene and PMMA characterized. PNT is a photochromic molecule capable of reversible photoisomerization between a yellow form (cis-PNT, {lambda}{sub max} = 484 nm) and a purple form (trans-PNT, {lambda}{sub max} = 595 nm). The stable purple form converts to the yellow form with a trans-PNT to cis-PNT conversion quantum yield of 0.027 in toluene and 0.062 in PMMA. The unstable yellow form exhibits a cis-PNT to trans-PNT quantum efficiency of conversion of 0.27-0.85 in toluene and 0.17-0.68 PMMA, with highest conversion efficiency occurring in the vicinity of its {lambda}{sub max} of 484 nm. Trans-PNT has a strong fluorescence quantum yield, 0.14 (toluene) and 0.16 (PMMA). For samples prepared photochemically in the cis-PNT form, slow thermal relaxation to the trans form occurs in the dark, with a half life of about 17 hours in toluene (25 C) and even slower, 168 hours, in PMMA. The property of photoswitching between fluorescent and non-fluorescent forms makes this material a candidate for many applications in imaging and data storage. An anomalous excitation profile for the fluorescence from trans-PNT, showing a dip at {approx}600 nm, is an agreement with the …

Using the dielectric wall accelerator technology, they are developing a compact induction accelerator system primarily intended for pulsed radiography. Unlike the typical induction accelerator cell that is long compared with its accelerating gap width, the proposed dielectric wall induction accelerator cell is short and its accelerating gap width is comparable with the cell length. In this geometry, the RF modes may be coupled from one cell to the next. They will present recent results of RF modeling of the cells and a prediction of the transverse beam instability on a 2-kA, 8-MeV beam.

The primary purposes of this project were to (1) improve and validate the LLNL/IMPACT atmospheric chemistry and aerosol transport model, (2) experimentally analyze size- and time-resolved aerosol measurements taken during spring 2001 in Northern California, and (3) understand the origin of dust impacting Northern California. Under this project, we (1) more than doubled the resolution of the LLNL-IMPACT global atmospheric chemistry and aerosol model (to 1 x 1 degree), (2) added an interactive dust emission algorithm to the IMPACT model in order to simulate observed events, (3) added detailed microphysics to the IMPACT model to calculate the size-distribution of aerosols in terms of mass, (4) analyzed the aerosol mass and elemental composition of the size- and time-resolved aerosol measurements made by our UC Davis collaborators, and (5) determined that the majority of the observed soil dust is from intercontinental transport across the Pacific. A detailed report on this project is in the attached document ''Impact of Long-Range Dust Transport on Northern California in Spring 2002'' (UCRL-TR-209597), except for the addition of aerosol microphysics, which is covered in the attached document ''Implementation of the Missing Aerosol Physics into LLNL IMPACT'' (UCRL-TR-209568). In addition to the technical results, this project has (1) …

We present the Multi-Array Galactic Plane Imaging Survey (MAGPIS), which maps portions of the first Galactic quadrant with an angular resolution, sensitivity and dynamic range that surpasses existing radio images of the Milky Way by more than an order of magnitude. The source detection threshold at 20 cm is in the range 1-2 mJy over the 85% of the survey region (5{sup o} < l < 32{sup o}, |b| < 0.8{sup o}) not covered by bright extended emission; the angular resolution is {approx} 6''. We catalog over 3000 discrete sources (diameters mostly < 30'') and present an atlas of {approx} 400 diffuse emission regions. New and archival data at 90 cm for the whole survey area are also presented. Comparison of our catalogs and images with the MSX mid-infrared data allow us to provide preliminary discrimination between thermal and non-thermal sources. We identify 49 high-probability supernova remnant candidates, increasing by a factor of seven the number of known remnants with diameters smaller than 50 in the survey region; several are pulsar wind nebula candidates and/or very small diameter remnants (D < 45''). We report the tentative identification of several hundred H II regions based on a comparison with the mid-IR …

Microarrays of single macrophage cell based sensors weredeveloped and demonstrated for real time bacterium detection bysynchrotron FTIR microscopy. The cells were patterned on gold-SiO2substrates via a surface engineering technique by which the goldelectrodes were immobilized with fibronectin to mediate cell adhesion andthe silicon oxide background were passivated with PEG to resist proteinadsorption and cell adhesion. Cellular morphology and IR spectra ofsingle, double, and triple cells on gold electrodes exposed tolipopolysaccharide (LPS) of different concentrations were compared toreveal the detection capabilities of these biosensors. The single-cellbased sensors were found to generate the most significant IR wave numbervariation and thus provide the highest detection sensitivity. Changes inmorphology and IR spectrum for single cells exposed to LPS were found tobe time- and concentration-dependent and correlated with each other verywell. FTIR spectra from single cell arrays of gold electrodes withsurface area of 25 mu-m2, 100 mu-m2, and 400 mu-m2 were acquired usingboth synchrotron and conventional FTIR spectromicroscopes to study thesensitivity of detection. The results indicated that the developedsingle-cell platform can be used with conventional FTIRspectromicroscopy. This technique provides real-time, label-free, andrapid bacterial detection, and may allow for statistic and highthroughput analyses, and portability.

We designed and fabricated mixing devices that will help us elucidate the mechanisms of protein folding through measurements of folding reaction rates. These devices can be used in studying of other biological systems and are compatible with various spectroscopic observation methods. The project involved development of fabrication processes and setup of a laboratory for assembly and characterization of microfluidic devices, as well as measurements of protein folding kinetics. We produced three variants of the mixer: (1) The ultra fast mixer for Foerster Resonance Energy Transfer measurements (described by Anal. Chem. Article UCRL-JRNL-206676) and MicroTAS Conference Proceedings article (UCRL-JC-153057 ) included in the report; (2) The ultra fast mixer for UV measurements (described by the poster presented at MicroTAS conference (UCRL-POST-207476) included in the report); and (3) The mixer for single molecule measurements (described by the Science article UCRL-JC-153057) included in the report. In these mixers, the channels are narrow, ranging from a few to hundreds of {micro}m, so that the flow is laminar and all of the mixing is achieved through diffusion. Our goal is to develop robust microfluidic mixer with at least 100 times lower consumption rate, shorter dead time and time resolution than commercially available mixers that would …

We have combined a sample of 44 984 quasars, selected from the Sloan Digital Sky Survey (SDSS) Data Release 3, with the FIRST radio survey. Using a novel technique where the optical quasar position is matched to the complete radio environment within 450'', we are able to characterize the radio morphological make-up of what is essentially an optically selected quasar sample, regardless of whether the quasar (nucleus) itself has been detected in the radio. About 10% of the quasar population have radio cores brighter than 0.75 mJy at 1.4 GHz, and 1.7% have double lobed FR2-like radio morphologies. About 75% of the FR2 sources have a radio core (> 0.75mJy). A significant fraction ({approx}40%) of the FR2 quasars are bent by more than 10 degrees, indicating either interactions of the radio plasma with the ICM or IGM. We found no evidence for correlations with redshift among our FR2 quasars: radio lobe flux densities and radio source diameters of the quasars have similar distributions at low (mean 0.77) and high (mean 2.09) redshifts. Using a smaller high reliability FR2 sample of 422 quasars and two comparison samples of radio-quiet and non-FR2 radio-loud quasars, matched in their redshift distributions, we constructed composite …

The Savannah River National Laboratory (SRNL) plays a key role in emergency response scenarios in which there may be a release of atmospheric chemical or radiological contamination at the DOE's Savannah River Site (SRS). Meteorologists at SRNL use a variety of tools to predict the path of the plume and levels of contamination along the path. These predictions are used to guide field teams that take sample measurements for verification. Integration of these predicted plumes as well as field measurements into existing Geographic Information System (GIS) interactive maps provides key additional information for decision makers during an emergency. In addition, having this information in GIS format facilitates sharing the information with other agencies that use GIS. In order to be useful during an emergency, an application for converting predictions or measurements into GIS format must be automated and simple to use. Thus, a key design goal in developing such applications is ease of use. Simple menu selections and intuitive forms with graphical user interfaces are used to accomplish this goal. Applications have been written to convert two different predictive code results into ArcView GIS. Meteorologists at SRNL use the Puff/Plume code, which is tied to real-time wind data, to predict …

Because glueballs are SU(3){sub Flavor} singlets, they are expected to couple equally to u,d, and s quarks, so that equal coupling strengths to {pi}{sup +}{pi}{sup -} and K{sup +}K{sup -} are predicted. However, we show that chiral symmetry implies the scalar glueball amplitude for G{sub 0} {yields} {bar q}q is proportional to the quark mass, so that mixing with {bar s}s mesons is enhanced and decays to K{sup +}K{sup -} are favored over {pi}{sup +}{pi}{sup -}. Together with evidence from lattice calculations and from experiment, this supports the hypothesis that f{sub 0}(1710) is the ground state scalar glueball.

The U.S. and Russian Federation continue to make substantive progress in the arms control and nonproliferation transparency regimes. We are moving toward an implementation choice for creating radiation measurement systems that are transparent in both their design and in their implementation. In particular, the choice of a programming language to write software for such regimes can decrease or significantly increase the costs of authentication. In this paper, we compare procedural languages with object-oriented languages. In particular, we examine the C and C++ languages; we compare language features, code generation, implementation details, and executable size and demonstrate how these attributes aid or hinder authentication and backdoor threats. We show that programs in lower level, procedural languages are more easily authenticated than are object-oriented ones. Potential tools and methods for authentication are covered. Possible mitigations are suggested for using object-oriented programming languages.