At the request of the Defense Logistics Agency, the Oak Ridge Institute for Science and Education conducted radiological scoping surveys of the Scotia Depot during the period of September 24 through 27, 2007. The scoping survey included visual inspections and limited radiological surveys performed in accordance with area classification that included surface scans, total and removable activity measurements, and soil sampling.

An electronic transition of iron in magnesiowuestite has been studied with synchrotron Moessbauer and X-ray emission spectroscopies under high pressures. Synchrotron Moessbauer studies show that the quadrupole splitting disappears and the isomer shift drops significantly across the spin-paring transition of iron in (Mg{sub 0.75},Fe{sub 0.25})O between 62 and 70 GPa, whereas X-ray emission spectroscopy of the Fe-K{sub {beta}} fluorescence lines in dilute (Mg{sub 0.95},Fe{sub 0.05})O also confirms that a high-spin to low-spin transition occurs between 46 GPa and 55 GPa. Based upon current results and percolation theory, we reexamine the high-pressure phase diagram of (Mg,Fe)O and find that iron-iron exchange interaction plays an important role in stabilizing the high-spin state of iron in FeO-rich (Mg,Fe)O.

None

The accumulator ring of the Spallation Neutron Source (SNS) at ORNL employs in its straight sections closely packed quadrupole doublemagnets with large aperture of R=15.1 cm an relatively short iron-to-iron distance of 51.4 cm. These quads have much extended fringe field, and magnetic interferences among them in the doublet assemblies is not avoidable. Though each magnet in the assemblies has been individually mapped to high accuracy of lower than 0.01 percent level, the experimental data including the magnetic interference effect will not be available. We have performed 3D computing simulations on a quadrupole doublet model in order to assess the degree of the interference and to obtain relevant data for the SNS commissioning and operation.

None

None

None

Nuclear technologies have important distinctions and potential advantages for large-scale generation of hydrogen for U.S. energy services. Nuclear hydrogen requires no imported fossil fuels, results in lower greenhouse-gas emissions and other pollutants, lends itself to large-scale production, and is sustainable. The technical uncertainties in nuclear hydrogen processes and the reactor technologies needed to enable these processes, as well waste, proliferation, and economic issues must be successfully addressed before nuclear energy can be a major contributor to the nation's energy future. In order to address technical issues in the time frame needed to provide optimized hydrogen production choices, the Nuclear Hydrogen Initiative (NHI) must examine a wide range of new technologies, make the best use of research funding, and make early decisions on which technology options to pursue. For these reasons, it is important that system integration studies be performed to help guide the decisions made in the NHI. In framing the scope of system integration analyses, there is a hierarchy of questions that should be addressed: What hydrogen markets will exist and what are their characteristics? Which markets are most consistent with nuclear hydrogen? What nuclear power and production process configurations are optimal? What requirements are placed on the nuclear …

U.S. industry consumes approximately 37 percent of thenation's energy to produce 24 percent of the nation's GDP. Increasingly,society is confronted with the challenge of moving toward a cleaner, moresustainable path of production and consumption, while increasing globalcompetitiveness. Technology is essential in achieving these challenges.We report on a recent analysis of emerging energy-efficient technologiesfor industry, focusing on over 50 selected technologies. The technologiesare characterized with respect to energy efficiency, economics andenvironmental performance. This paper provides an overview of theresults, demonstrating that we are not running out of technologies toimprove energy efficiency, economic and environmental performance, andneither will we in the future. The study shows that many of thetechnologies have important non-energy benefits, ranging from reducedenvironmental impact to improved productivity, and reduced capital costscompared to current technologies.

Staff of the King County Wastewater Treatment Division (WTD) have concern about the aftermath of a radiological dispersion event (RDE) leading to the introduction of significant quantities of radioactive material into the combined sanitary and storm sewer system in King County, Washington. Radioactive material could come from the use of a radiological dispersion device (RDD). RDDs include "dirty bombs" that are not nuclear detonations but are explosives designed to spread radioactive material (National Council on Radiation Protection and Measurements (NCRP) 2001). Radioactive material also could come from deliberate introduction or dispersion of radioactive material into the environment, including waterways and water supply systems. This document develops plausible and/or likely scenarios, including the identification of likely radioactive materials and quantities of those radioactive materials to be involved. These include 60Co, 90Sr, 137Cs, 192Ir, 226Ra, plutonium, and 241Am. Two broad categories of scenarios are considered. The first category includes events that may be suspected from the outset, such as an explosion of a "dirty bomb" in downtown Seattle. The explosion would most likely be heard, but the type of explosion (e.g., sewer methane gas or RDD) may not be immediately known. Emergency first responders must be able to quickly detect the radioisotopes …

For about two decades, a population of relative small and nearby molecular clouds has been known to exist at high Galactic latitudes. Lying more than 10{sup o} from the Galactic plane, these clouds have typical distances of {approx}150 pc, angular sizes of {approx}1{sup o}, and masses of order tens of solar masses. These objects are passive sources of high-energy {gamma}-rays through cosmic ray-gas interactions. Using a new wide-angle CO survey of the northern sky, we show that typical high-latitude clouds are not bright enough in {gamma}-rays to have been detected by EGRET, but that of order 100 of them will be detectable by the Large Area Telescope (LAT) on GLAST. Thus, we predict a new steady population of {gamma}-ray sources at high Galactic latitudes, perhaps the most numerous after active galactic nuclei.

The non-scaling Fixed Field Alternating Gradient (FFAG-from now on) accelerator provides few advantages with respect to the other fixed field accelerators like CYCLOTRONS or scaling-FFAG's. One of the advantages is smaller required aperture due to small orbit offsets during acceleration. The large and heavy magnets are avoided. The beam is very well controlled in a strong focusing regime. This concept has been extensively investigated during the last eight FFAG workshops in Japan, USA, Canada, and CERN in Europe.

The ASTM standard B 575 provides the requirements for the chemical composition of Nickel-Chromium-Molybdenum (Ni-Cr-Mo) alloys such as Alloy 22 (N06022) and Alloy 686 (N06686). The compositions of each element are given in a range. For example, the content of Mo is specified from 12.5 to 14.5 weight percent for Alloy 22 and from 15.0 to 17.0 weight percent for Alloy 686. It was important to determine how the corrosion rate of welded plates of Alloy 22 using Alloy 686 weld filler metal would change if heats of these alloys were prepared using several variations in the composition of the elements even though still in the range specified in B 575. All the material used in this report were especially prepared at Allegheny Ludlum Co. Seven heats of plate were welded with seven heats of wire. Immersion corrosion tests were conducted in a boiling solution of sulfuric acid plus ferric sulfate (ASTM G 28 A) using both as-welded (ASW) coupons and solution heat-treated (SHT) coupons. Results show that the corrosion rate was not affected by the chemistry of the materials within the range of the standards.

Dust grains control the chemistry and cooling, and thus the gravitational collapse of interstellar clouds. Energetic particles, shocks and ionizing radiation can have a profound influence on the structure, lifetime and chemical reactivity of the dust, and therefore on the star formation efficiency. This would be especially important in forming galaxies, which exhibit powerful starburst (supernovae) and AGN (active galactic nucleus) activity. How dust properties are affected in such environments may be crucial for a proper understanding of galaxy formation and evolution. The authors present the results of experiments at LLNL which show that irradiation of the interstellar medium (ISM) dust analog forsterite (Mg{sub 2}SiO{sub 4}) with swift heavy ions (10 MeV Xe) and a large electronic energy deposition amorphizes its crystalline structure, without changing its chemical composition. From the data they predict that silicate grains in the ISM, even in dense and cold giant molecular clouds, can be amorphized by heavy cosmic rays (CR's). This might provide an explanation for the observed absence of crystalline dust in the ISM clouds of the Milky Way galaxy. This processing of dust by CR's would be even more important in forming galaxies and galaxies with active black holes.

In this report I will give an experimental overview on nuclear stopping in hadron collisions, and relate observations to understanding of baryon transport. Baryon number transport is not only evidenced via net-proton distributions but also by the enhancement of strange baryons near mid-rapidity. Although the focus is on high-energy data obtained from pp and heavy ions from RHIC, relevant data from SPS and ISR will be considered. A discussion how the available data at higher energy relates and gives information on baryon junction, quark-diquark breaking will be made.

The W-band Atmospheric Radiation Measurement (ARM) Program Cloud Radar (WACR) systems are zenith pointing Doppler radars that probe the extent and composition of clouds at 95.04 GHz. The main purpose of this radar is to determine cloud boundaries (e.g., cloud bottoms and tops). This radar reports estimates for the first three spectra moments for each range gate up to 15 km. The 0th moment is reflectivity, the 1st moment is radial velocity, and the 2nd moment is spectral width. Also available are the raw spectra files. Unlike the millimeter wavelength cloud radar (MMCR), the WACR does not use pulse coding and operates in only copolarization and cross-polarization modes.

On March 9, 2001, representatives of the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) and Argonne National Laboratory met with representatives from a number of federal and Nebraska state agencies (the wetlands agencies; see Table 1.1) to discuss the CCC/USDA's proposed aquifer remediation and wetlands restoration project at Utica, Nebraska. As part of those discussions, Argonne outlined preliminary recommendations for a long-term monitoring program to verify and document (1) the performance of the spray irrigation treatment process for the removal of carbon tetrachloride from extracted groundwater, (2) the geochemical quality of the extracted and treated groundwater delivered to the wetlands, and (3) the hydrogeologic and inorganic geochemical impacts of the groundwater delivery. General activities recommended included the following: (1) Periodic sampling and analysis for volatile organic compounds (VOCs) in groundwater extracted at each pumping well and in water discharged from the spray irrigation treatment units. (2) Periodic sampling of groundwater from each pumping well and directly from the sprinkler discharge, for analysis for selected inorganic water quality parameters. The CCC/USDA and Argonne also requested at the March 2001 meeting that the wetlands agencies accept responsibility for developing the ecological and biological monitoring programs needed to meet environmental …

The objective of this report is to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity. Oil based drilling fluids can have an adverse effect on NMR well logging if it alters the wettability of the formation. The effect of various surfactants on wettability and surface relaxivity are evaluated for silica sand. The relation between the relaxation time and diffusivity distinguishes the response of brine, oil, and gas in a NMR well log. A new NMR pulse sequence in the presence of a field gradient and a new inversion technique enables the T{sub 2} and diffusivity distributions to be displayed as a two-dimensional map. The objectives of pore morphology and rock characterization are to identify vug connectivity by using X-ray CT scan, and to improve NMR permeability correlation. Improved estimation of permeability from NMR response is possible by using estimated tortuosity as a parameter to interpolate between two existing permeability models.

This benchmarking review has been developed to support benchmarking planning and tool development under discussion by the California Energy Commission (CEC), Lawrence Berkeley National Laboratory (LBNL) and others in response to the Governor's Executive Order S-20-04 (2004). The Executive Order sets a goal of benchmarking and improving the energy efficiency of California's existing commercial building stock. The Executive Order requires the CEC to propose ''a simple building efficiency benchmarking system for all commercial buildings in the state''. This report summarizes and compares two currently available commercial building energy-benchmarking tools. One tool is the U.S. Environmental Protection Agency's Energy Star National Energy Performance Rating System, which is a national regression-based benchmarking model (referred to in this report as Energy Star). The second is Lawrence Berkeley National Laboratory's Cal-Arch, which is a California-based distributional model (referred to as Cal-Arch). Prior to the time Cal-Arch was developed in 2002, there were several other benchmarking tools available to California consumers but none that were based solely on California data. The Energy Star and Cal-Arch benchmarking tools both provide California with unique and useful methods to benchmark the energy performance of California's buildings. Rather than determine which model is ''better'', the purpose of this report …

We present non-equilibrium molecular dynamics (MD) simulations of wave propagation in nanocrystals. We find that the width of the traveling wave front increases with grain size, d, as d{sup 1/2}. This width also decreases with the pressure behind the front. We extrapolate our results to micro-crystals and obtain reasonable agreement with experimental data. In addition, our extrapolation agrees with models that only take into account the various velocities of propagation along different crystalline orientations, without including grain boundary effects. Our results indicate that, even at the nanoscale, the role of grain boundaries as scattering centers or as sources of plasticity does not increase significantly the width of the traveling wave.

Solar energy has become a major alternative for supplying a substantial fraction of the nation's future energy needs. The U.S. Department of Energy (DOE) supports activities ranging from the demonstration of existing technology to research on future possibilities. At Lawrence Berkeley Laboratory (LBL), projects are in progress that span a wide range of activities, with the emphasis on research to extend the scientific basis for solar energy applications, and on preliminary development of new approaches to solar energy conversion. To assess various solar applications, it is important to quantify the solar resource. Special instruments have been developed and are now in use to measure both direct solar radiation and circum-solar radiation, i.e., the radiation from near the sun resulting from the scattering of sunlight by small particles in the atmosphere. These measurements serve to predict the performance of solar designs that use focusing collectors employing mirrors or lenses to concentrate the sunlight. Efforts have continued at a low level to assist DOE in demonstrating existing solar technology by providing the San Francisco Operations Office (SAN) with technical support for its management of commercial-building solar demonstration projects. Also, a hot water and space-heating system has been installed on an LBL building …

High-precision analyses of supersymmetry parameters aim atreconstructing the fundamental supersymmetric theory and its breakingmechanism. A well defined theoretical framework is needed whenhigher-order corrections are included. We propose such a scheme,Supersymmetry Parameter Analysis SPA, based on a consistent set ofconventions and input parameters. A repository for computer programs isprovided which connect parameters in different schemes and relate theLagrangian parameters to physical observables at LHC and high energy e+e-linear collider experiments, i.e., masses, mixings, decay widths andproduction cross sections for supersymmetric particles. In addition,programs for calculating high-precision low energy observables, thedensity of cold dark matter (CDM) in the universe as well as the crosssections for CDM search experiments are included. The SPA scheme stillrequires extended efforts on both the theoretical and experimental sidebefore data can be evaluated in the future at the level of the desiredprecision. We take here an initial step of testing the SPA scheme byapplying the techniques involved to a specific supersymmetry referencepoint.

This paper explores some of the system dynamics and control issues for a short-stroke rotary actuator that we designed and tested for a new fast tool servo referred to as the 10 kHz rotary fast tool servo. The use of a fast tool servo (FTS) with a diamond turning machine for producing non-axisymmetric or textured surfaces on a workpiece is well known. In a previous paper [1] the authors provide details on the mechanical design and trade-off issues that were considered during the design phase for the fast tool servo. At the heart of that machine is the normal-stress variable reluctance rotary actuator described in more detail in this paper. In addition to producing the torque that is needed for the 10 kHz rotary fast tool servo, the actuator produces a force and is therefore referred to as a hybrid rotary/linear actuator. The actuator uses bias and steering magnetic fluxes for linearizing the torque versus current relationship. Certain types of electric engraving heads use an actuator similar in principle to our hybrid actuator. In the case of the engraving heads, the actuator is used to produce and sustain a resonating mechanical oscillator. This is in sharp contrast to the arbitrary …

The model-based assessments of nominal Sludge Batch 4 (SB4) compositions suggest that a viable frit candidate does not appear to be a limiting factor as the Closure Business Unit (CBU) considers various tank blending options and/or washing strategies. This statement is based solely on the projected operating windows derived from model predictions and does not include assessments of SO{sub 4} solubility or melt rate issues. The viable frit candidates covered a range of Na{sub 2}O concentrations (from 8% to 13%--including Frit 418 and Frit 320) using a ''sliding Na{sub 2}O scale'' concept (i.e., 1% increase in Na{sub 2}O being balanced by a 1% reduction in SiO{sub 2}) which effectively balances the alkali content of the incoming sludge with that in the frit to maintain and/or increase the projected operating window size while potentially leading to improved melt rate and/or waste loadings. This strategy or approach allows alternative tank blending strategies and/or different washing scenarios to be considered and accounted for in an effective manner without wholesale changes to the frit composition. In terms of projected operating windows, in general, the sludge/frit systems evaluated resulted in waste loading intervals from 25 to the mid-40%'s or even the mid-50%'s. The results suggest …