We summarize the status of the two U.S. feasibility studies carried out by the Neutrino Factory and Muon Collider Collaboration (NFMCC) along with recent improvements to Neutrino Factory design developed during the American Physical Society (APS) Neutrino Physics Study. Suggested accelerator topics for the International Scoping Study (ISS) are also indicated.

Path Integral Monte Carlo (PIMC) can reproduce the results of simple analytical calculations in which a single quantum particle is used to represent positronium within an idealized, spherical pore. Our calculations improve on this approach by explicitly treating the positronium as a two-particle e{sup -}, e{sup +} system interacting via the Coulomb interaction. We study the lifetime and the internal contact density, {kappa}, which controls the self-annihilation behavior, for positronium in model spherical pores, as a function of temperature and pore size. We compare the results with both PIMC and analytical calculations for a single-particle model.

For many rocks of high economic interest such as chalk,diatomite, tight gas sands or coal, nanometer scale resolution is neededto resolve the 3D-pore structure, which controls the flow and trapping offluids in the rocks. Such resolutions cannot be achieved with existingtomographic technologies. A new 3D imaging method, based on serialsectioning and using the Focused Ion Beam (FIB) technology has beendeveloped. FIB allows for the milling of layers as thin as 10 nanometersby using accelerated Ga+ ions to sputter atoms from the sample surface.After each milling step, as a new surface is exposed, a 2D image of thissurface is generated. Next, the 2D images are stacked to reconstruct the3D pore or grain structure. Resolutions as high as 10 nm are achievableusing this technique. A new image processing method uses directmorphological analysis of the pore space to characterize thepetrophysical properties of diverse formations. In addition to estimationof the petrophysical properties (porosity, permeability, relativepermeability and capillary pressures), the method is used for simulationof fluid displacement processes, such as those encountered in variousimproved oil recovery (IOR) approaches. Computed with the new methodcapillary pressure curves are in good agreement with laboratory data. Themethod has also been applied for visualization of the fluid distributionat various saturations …

This paper summarizes the status of worldwide Neutrino Factory R&D efforts. Activities are categorized as simulations, component development, and system tests. An indication of R&D tasks that remain to be accomplished is also given.

In-situ x-ray diffraction was used to study the response of single crystal iron under shock conditions. Measurements of the response of [001] iron showed a uniaxial compression of the initially bcc lattice along the shock direction by up to 6% at 13 GPa. Above this pressure, the lattice responded with a further collapse of the lattice by 15-18% and a transformation to a hcp structure. The in-situ measurements are discussed and results summarized.

Urban areas tend to have higher air temperatures than their rural surroundings as a result of gradual surface modifications that include replacing the natural vegetation with buildings and roads. The term ''Urban Heat Island'' describes this phenomenon. The surfaces of buildings and pavements absorb solar radiation and become extremely hot, which in turn warm the surrounding air. Cities that have been ''paved over'' do not receive the benefit of the natural cooling effect of vegetation. As the air temperature rises, so does the demand for air-conditioning (a/c). This leads to higher emissions from power plants, as well as increased smog formation as a result of warmer temperatures. In the United States, we have found that this increase in air temperature is responsible for 5-10% of urban peak electric demand for a/c use, and as much as 20% of population-weighted smog concentrations in urban areas. Simple ways to cool the cities are the use of reflective surfaces (rooftops and pavements) and planting of urban vegetation. On a large scale, the evapotranspiration from vegetation and increased reflection of incoming solar radiation by reflective surfaces will cool a community a few degrees in the summer. As an example, computer simulations for Los Angeles, …

Urban areas tend to have higher air temperatures than their rural surroundings as a result of gradual surface modifications that include replacing the natural vegetation with buildings and roads. The term ''Urban Heat Island'' describes this phenomenon. The surfaces of buildings and pavements absorb solar radiation and become extremely hot, which in turn warm the surrounding air. Cities that have been ''paved over'' do not receive the benefit of the natural cooling effect of vegetation. As the air temperature rises, so does the demand for air-conditioning (a/c). This leads to higher emissions from power plants, as well as increased smog formation as a result of warmer temperatures. In the United States, we have found that this increase in air temperature is responsible for 5-10% of urban peak electric demand for a/c use, and as much as 20% of population-weighted smog concentrations in urban areas. Simple ways to cool the cities are the use of reflective surfaces (rooftops and pavements) and planting of urban vegetation. On a large scale, the evapotranspiration from vegetation and increased reflection of incoming solar radiation by reflective surfaces will cool a community a few degrees in the summer. As an example, computer simulations for Los Angeles, …

Aging and weathering can reduce the solar reflectance of cool roofing materials. This paper summarizes laboratory measurements of the solar spectral reflectance of unweathered, weathered, and cleaned samples collected from single-ply roofing membranes at various sites across the United States. Fifteen samples were examined in each of the following six conditions: unweathered; weathered; weathered and brushed; weathered, brushed and then rinsed with water; weathered, brushed, rinsed with water, and then washed with soap and water; and weathered, brushed, rinsed with water, washed with soap and water, and then washed with an algaecide. Another 25 samples from 25 roofs across the United States and Canada were measured in their unweathered state, weathered, and weathered and wiped. We document reduction in reflectivity resulted from various soiling mechanisms and provide data on the effectiveness of various cleaning approaches. Results indicate that although the majority of samples after being washed with detergent could be brought to within 90% of their unweathered reflectivity, in some instances an algaecide was required to restore this level of reflectivity.

In situ X-ray diffraction allows the determination of the structure of transient states of matter. We have used laser-plasma generated X-rays to study how single crystals of metals (copper and iron) react to uniaxial shock compression. We find that copper, as a face-centered-cubic material, allows rapid generation and motion of dislocations, allowing close to hydrostatic conditions to be achieved on sub-nanosecond timescales. Detailed molecular dynamics calculations provide novel information about the process, and point towards methods whereby the dislocation density might be measured during the passage of the shock wave itself. We also report on recent experiments where we have obtained diffraction images from shock-compressed single-crystal iron. The single crystal sample transforms to the hcp phase above a critical pressure, below which it appears to be uniaxially compressed bcc, with no evidence of plasticity. Above the transition threshold, clear evidence for the hcp phase can be seen in the diffraction images, and via a mechanism that is also consistent with recent multi-million atom molecular dynamics simulations that use the Voter-Chen potential. We believe these data to be of import, in that they constitute the first conclusive in situ evidence of the transformed structure of iron during the passage of a …

The authors present a preliminary measurement of CP-violating parameters S and C from fits of the time-dependence of B{sup 0} meson decays to {eta}'K{sub L}{sup 0}. The data were recorded with the BABAR detector at PEP-II and correspond to 232 x 10{sup 6} B{bar B} pairs produced in e{sup +}e{sup -} annihilation through the {Upsilon}(4S) resonance. By fitting the time-dependent CP asymmetry of the reconstructed B{sup 0} {yields} {eta}'K{sub L}{sup 0} events, they find S = 0.60 {+-} 0.31 {+-} 0.04 and C = 0.10 {+-} 0.21 {+-} 0.03, where the first error quoted is statistical and the second is systematic. They also perform a combined fit using both {eta}'K{sub S}{sup 0} and {eta}'K{sub L}{sup 0} data, and find S = 0.36 {+-} 0.13 {+-} 0.03 and C = -0.16 {+-} 0.09 {+-} 0.02.

This report is about 3D Arcing for Offset Measurements with a Hamar Laser on 7th International workshop on accelerator alignment.

Protein microarrays have emerged as important tools for screening protein-protein interactions and hold great potential for various applications including proteomics research, drug discovery, and diagnostics. This work describes a novel method for the traceless immobilization of proteins to a solid support through split-intein mediated protein trans-splicing. This method has been successfully used for the immobilization of biologically active proteins from very diluted samples ({approx}1{micro}M) and it does not require the purification of the protein to be attached. This makes possible the direct immobilization of proteins from complex mixtures such as cellular lysates and it can also be easily interfaced with cell-free expression systems for high-throughput production of protein microarrays.

The name GEONET means data reduction software for the accelerator alignment community. It was developed in the early 1980's but the only thing left from the original version is the hierarchical directory structure to hold the observations and results. This poster presents the three components of WinGEONET: the Windows interface, the computational engine and the visualization tool. It also presents further developments towards a more versatile toolbox architecture.

None

Hazardous radioactive materials can be released into the atmosphere by accidents at nuclear power plants, fuel processing facilities, and other facilities, and by transportation accidents involving nuclear materials. In addition, the post-cold-war proliferation of nuclear material has increased the potential for terrorism scenarios involving radiological dispersal devices, improvised nuclear devices, and inadequately secured military nuclear weapons. To mitigate these risks, the National Atmospheric Release Advisory Center (NARAC) serves as a national resource for the United States, providing tools and services to quickly predict the environmental contamination and health effects caused by airborne radionuclides, and to provide scientifically based guidance to emergency managers for the protection of human life. NARAC's expert staff uses computer models, supporting databases, software systems, and communications systems to predict the plume paths and consequences of radiological, chemical, and biological atmospheric releases.

Data samples corresponding to the isospin-violating decay D*{sub s}{sup +} {yields} D{sub s}{sup +}{pi}{sup 0} and the decays D*{sub s}{sup +} {yields} D{sub s}{sup +}, D*{sup 0} {yields} D{sup 0}{pi}{sup 0} and D*{sup 0} {yields} D{sup 0}{gamma} are reconstructed using 90.4 fb{sup -1} of data recorded by the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} collider. The following branching ratios are extracted: {Lambda}(D*{sub s}{sup +} {yields} D{sub s}{sup +}{pi}{sup 0})/{Lambda}(D*{sub s}{sup +} {yields} D{sub s}{sup +}{gamma}) = 0.062 {+-} 0.005(stat.) {+-} 0.006(syst.) and {Lambda}(D*{sup 0} {yields} D{sup 0}{pi}{sup 0})/{Lambda}(D*{sup 0} {yields} D{sup 0}{gamma}) = 1.74 {+-} 0.02(stat.) {+-} 0.13(syst.). Both measurements represent significant improvements over present world averages.

The E166 experiment is a proof-of-principle experiment to demonstrate the production of polarized positrons with a helical undulator. The experiment has taken first data in June 2005 at SLAC. This article gives a short overview of the performance of various components of the experiment.