Weak gravitational lensing of background galaxies offers an excellent opportunity to study the intervening distribution of matter. While much attention to date has focused on the two-point function of the cosmic shear, the three-point function, the bispectrum, also contains very useful cosmological information. Here, we compute three corrections to the bispectrum which are nominally of the same order as the leading term. We show that the corrections are small, so they can be ignored when analyzing present surveys. However, they will eventually have to be included for accurate parameter estimates from future surveys.

We present the first measurement of the A{sub 2} and A{sub 3} angular coefficients of the W boson produced in proton-antiproton collisions. We study W {yields} ev{sub e} and W {yields} {mu}{nu}{sub {mu}} candidate events produced in association with at least one jet at CDF, during Run Ia and Run Ib of the Tevatron at {radical}s = 1.8 TeV. The corresponding integrated luminosity was 110 pb{sup -1}. The jet balances the transverse momentum of the W and introduces QCD effects in W boson production. The extraction of the angular coefficients is achieved through the direct measurement of the azimuthal angle of the charged lepton in the Collins-Soper rest-frame of the W boson. The angular coefficients are measured as a function of the transverse momentum of the W boson. The electron, muon, and combined results are in good agreement with the Standard Model prediction, up to order {alpha}{sub s}{sup 2} in QCD.

The discovery of the Higgs boson would be a major success for the Standard Model (SM) and would provide further insights into the electroweak symmetry breaking mechanism. This report contains the latest results from the D0 and CDF Tevatron experiments on searches for the SM Higgs produced from gluon fusion with H {yields} WW, and in association with a W boson. It also includes searches for a supersymmetric Higgs in the b{bar b} and {tau}{sup +}{tau}{sup -} decay channels. The study of di-boson production at the Tevatron is important to understand backgrounds in high mass Higgs searches. It also provides a test of the SM through the measurement of the production cross section and the gauge boson self couplings. This paper includes measurements of the WW, W{gamma}, and WZ production cross sections, as well as limits on the anomalous couplings associated with the WW{gamma} and WWZ interactions. The results are based on sets of up to 320 pb{sup -1} of data collected by the D0 and CDF experiments at the {bar p}p Tevatron collider, running at a center-of-mass energy of 1.96 TeV.

We present experimental results in three areas. Solar cells with an efficiency of 19% have been fabricated with an absorber bandgap in the range of 1.1-1.2 eV. Properties of solar cells fabricated with and without an undoped ZnO layer were compared. The data show that high efficiency cells can be fabricated without using the high-resistivity or undoped ZnO layer. Properties of CIGS solar cells were fabricated from thin absorbers (1 {micro}m) deposited by the three-stage process and simultaneous co-deposition of all the elements. In both cases, solar cells with efficiencies of 16%-17% are obtained.

A technique for creating a burst of 100 ns notches (beam extinctions) in an H{sup -} beam at 454 kHz has been developed at {le} 20 keV utilizing a Magnetron ion source with a slit extraction system and a split extractor. Each half of the extractor is treated as part of a 50 ohm transmission line which can be pulsed at {+-} 700 volts creating a 1400 volt gradient across the extractor. A beam current reduction of better than 95% has been observed at the end of the Fermilab 400 MeV Linac. Notched multi-turn charge-exchange injection into the Booster, a 400 MeV to 8 GeV synchrotron, has been demonstrated with a charge reduction in the resulting beam gap of 83%. Presently, the trailing edge of the notch may be adversely affected by space charge resulting in a beam recovery with two different time constants. Efforts to minimize this effect are discussed.

We report the deposition of improved hydrogenated amorphous silicon germanium (a-SiGe:H) films by the hot wire CVD (HWCVD) technique using a tantalum filament operating at a low temperature. We gauge the material quality of the a-SiGe:H films by comparing infrared, small angle X-ray scattering (SAXS), photocapacitance, and conductivity measurements to earlier results, and fabricate single-junction n-i-p solar cell devices using these i-layers.

This paper explores how to fit the decay of the luminosity in the Tevatron. The standard assumptions of a fixed-lifetime exponential decay are only appropriate for very short time intervals. A ''1/time'' functional form fits well, and is supported by analytical derivations. A more complex form, assuming a time-varying lifetime-like term, also produces good results. Changes in the luminosity can be factored into two phenomena: The luminosity burn-off rate, and the burn-off rate from non-luminosity effects. This is particularly relevant for the antiprotons in the Tevatron. The luminous and the non-luminous burn rate of the antiprotons are shown for Tevatron stores.

The performance and unique features of the RHIC polarized jet target and our solutions to the important design constraints imposed on the jet by the RHIC environment are described. The target polarization and thickness were measured to be 0.924 {+-} 2% and 1.3 {+-} 0.2 x 10{sup 12} atoms/cm{sup 2} respectively.

Increasingly, ADC technology is being pressed into service for single single-shot instrumentation applications that were formerly served by vacuum-tube based oscilloscopes and streak cameras. ADC technology, while convenient, suffers significant performance impairments. Thus, in these demanding applications, a quantitative and accurate representation of these impairments is critical to an understanding of measurement accuracy. We have developed a phase-plane behavioral model, implemented it in SIMULINK and applied it to interleaved, high-speed ADCs (up to 4 gigasamples/sec). We have also developed and demonstrated techniques to effectively compensate for these impairments based upon the model.

By analogy to the different accretion states observed in black-hole X-ray binaries (BHXBs), it appears plausible that accretion disks in active galactic nuclei (AGN) undergo a state transition between a radiatively efficient and inefficient accretion flow. If the radiative efficiency changes at some critical accretion rate, there will be a change in the distribution of black hole masses and bolometric luminosities at the corresponding transition luminosity. To test this prediction, the author considers the joint distribution of AGN black hole masses and bolometric luminosities for a sample taken from the literature. The small number of objects with low Eddington-scaled accretion rates m < 0.01 and black hole masses M{sub BH} < 10{sup 9} M{sub {circle_dot}} constitutes tentative evidence for the existence of such a transition in AGN. Selection effects, in particular those associated with flux-limited samples, systematically exclude objects in particular regions of the (M{sub BH}, L{sub bol}) plane. Therefore, they require particular attention in the analysis of distributions of black hole mass, bolometric luminosity, and derived quantities like the accretion rate. The author suggests further observational tests of the BHXB-AGN unification scheme which are based on the jet domination of the energy output of BHXBs in the hard state, …

To accurately reconstruct a shower axis from the Fluorescence Detector data it is essential to establish with high precision the absolute pointing of the telescopes. To d that they calculate the absolute pointing of a telescope using sky background data acquired during regular data taking periods. The method is based on the knowledge of bright star's coordinates that provide a reliable and stable coordinate system. it can be used to check the absolute telescope's pointing and its long-term stability during the whole life of the project, estimated in 20 years. They have analyzed background data taken from January to October 2004 to determine the absolute pointing of the 12 telescopes installed both in Los Leones and Coihueco. The method is based on the determination of the mean-time of the variance signal left by a star traversing a PMT's photocathode which is compared with the mean-time obtained by simulating the track of that star on the same pixel.

The author discusses central exclusive production, also known as Double Pomeron Exchange DIPE, from the ISR through the Tevatron to the LHC. There the author emphasizes the interest of exclusive Higgs and W{sup +}W{sup -}/ZZ production.

Chromaticity drift during injection is a well-known phenomenon in superconducting colliders, such as the Tevatron, HERA and RHIC. Imperfect compensation of the drift effects can contribute to beam loss and emittance growth. It is caused by the drift of the sextupole component in the dipole magnets due to current redistribution in its superconducting coils. Recently extensive studies of chromaticity drift were conducted at the Tevatron, aiming at the improvement of the luminosity performance in the ongoing run II. These studies included not only beam experiments, but also extensive off-line magnetic measurements on spare Tevatron dipoles. Less known, until recently, is that chromaticity drift is often accompanied by tune and coupling drift. This was recently discovered in the Tevatron. We believe that these effects are the product of systematic beam offset in conjunction with the sextupole drifts (and their compensation in the chromaticity correctors). These discoveries are most relevant to the upcoming LHC, where the drift effects will have even more dramatic consequences given the high beam current. It is therefore not a surprise that CERN has been the source of major advances in the understanding of dynamic effects during the LHC superconducting magnet development. The following will briefly review the …

Using data from the FOCUS (E831) experiment at Fermilab, we present a new measurement of the weak decay-asymmetry parameter a{sub {Lambda}{sub c}} in {Lambda}{sub c}{sup +} {yields} {Lambda}{pi}{sup +} decay. Comparing particle with antiparticle decays, we obtain the first measurement of the CP violation parameter {Alpha} {triple_bond} a{sub {Lambda}{sub c}} + a{sub {ovr {Lambda}{sub c}}}/a{sub {Lambda}{sub c}} - a{sub {ovr {Lambda}{sub c}}}. We obtain a{sub {Lambda}{sub c}} = -0.78 {+-} 0.16 {+-} 0.13 and {Alpha} = -0.07 {+-} 0.19 {+-} 0.12 where errors are statistical and systematic.

The authors have studied the {sup 3}P{sub J} ({chi}{sub e}) states of charmonium in formation by antiproton-proton annihilations in experiment E835 at the Fermilab Antiproton Source. The authors report new measurements of the mass, width, and B({chi}{sub cJ} {yields} {bar p}p) x {Lambda}({chi}{sub eJ} {yields} J/{psi} + anything) for the {chi}{sub c1} and {chi}{sub c2} by means of the inclusive reaction {bar p}p {yields} {chi}{sub cJ} {yields} J/{psi} + anything {yields} (e{sup +}e{sup -}) + anything. Using the subsample of events where {chi}{sub cJ} {yields} {gamma} + J/{psi} {yields} {gamma} + (e{sup +}e{sup -}) is fully reconstructed, we derive B({chi}{sub cJ} {yields} {bar p}p) x {Lambda}({chi}{sub cJ} {yields} J/{psi} + {gamma}). They summarize the results of the E760 (updated) and E835 measurements of mass, width and B({chi}{sub cJ} {yields} {bar p}p){Lambda}({chi}{sub cJ} {yields} J/{psi} + {gamma}) (J = 0,1,2) and discuss the significance of these measurements.

In 1998, the United States entered into an agreement with CERN to help build the Large Hadron Collider (LHC), with contributions to the accelerator and to the large HEP detectors. To accomplish this, the US LHC Accelerator Project was formed, encompassing expertise from Brookhaven National Laboratory (BNL), Fermi National Accelerator Laboratory (FNAL) and the Lawrence Berkeley National Laboratory (LBNL). This report is a summary of these contributions including the progress towards project completion, as well as a discussion of future plans for continued US participation in the LHC accelerator.

With increasing concerns about energy independence, job outsourcing, and risks of global climate change, it is important for policy makers to understand all impacts from their decisions about energy resources. This paper assesses one aspect of the impacts: direct economic effects. The paper compares impacts to states from equivalent new electrical generation from wind, natural gas, and coal. Economic impacts include materials and labor for construction, operations, maintenance, fuel extraction, and fuel transport, as well as project financing, property tax, and landowner revenues. We examine spending on plant construction during construction years, in addition to all other operational expenditures over a 20-year span. Initial results indicate that adding new wind power can be more economically effective than adding new gas or coal power, and that a higher percentage of dollars spent on coal and gas will leave the state. For this report, we interviewed industry representatives and energy experts, in addition to consulting government documents, models, and existing literature. The methodology for this research can be adapted to other contexts for determining economic effects of new power generation in other states and regions.

Molecular dynamics simulations of a bulk melts of polydimethylsiloxane (PDMS) are utilized to study chain conformation and ordering under constant uniaxial tension. We find that large extensions induce chain ordering in the direction of applied tension. We also find that voids are created via a cavitation mechanism. This study represents a validation of the current model for PDMS and benchmark for the future study of mechanical properties of PDMS melts enriched with fillers under tension.

First-principles generalized pseudopotential theory (GPT) provides a fundamental basis for transferable multi-ion interatomic potentials in transition metals and alloys within density-functional quantum mechanics. In central bcc transition metals, where multi-ion angular forces are important to structural properties, simplified model GPT or MGPT potentials have been developed based on canonical d bands to allow analytic forms and large-scale atomistic simulations. Robust, advanced-generation MGPT potentials have now been obtained for Ta and Mo and successfully applied to a wide range of structural, thermodynamic, defect and mechanical properties at both ambient and extreme conditions. Selected applications to multiscale modeling discussed here include dislocation core structure and mobility, atomistically informed dislocation dynamics simulations of plasticity, and thermoelasticity and high-pressure strength modeling. Recent algorithm improvements have provided a more general matrix representation of MGPT beyond canonical bands, allowing improved accuracy and extension to f-electron actinide metals, an order of magnitude increase in computational speed for dynamic simulations, and the still-in-progress development of temperature-dependent potentials.

Better to understand the status of fusion research in the year 2003 we will first put the research in its historical context. Fusion power research, now beginning its sixth decade of continuous effort, is unique in the field of scientific research. Unique in its mixture of pure and applied research, unique in its long-term goal and its promise for the future, and unique in the degree that it has been guided and constrained by national and international governmental policy. Though fusion research's goal has from the start been precisely defined, namely, to obtain a net release of energy from controlled nuclear fusion reactions between light isotopes (in particular those of hydrogen and helium) the difficulty of the problem has spawned in the past a very wide variety of approaches to the problem. Some of these approaches have had massive international support for decades, some have been pursued only at a ''shoestring'' level by dedicated groups in small research laboratories or universities. In discussing the historical and present status of fusion research the implications of there being two distinctly different approaches to achieving net fusion power should be pointed out. The first, and oldest, approach is the use of strong magnetic …

Four nearly identical Nb{sub 3}Sn dipole models of the same design were built and tested at Fermilab. It provided a unique opportunity of systematic study the field quality effects in Nb{sub 3}Sn accelerator magnets. The results of these studies are reported in the paper.

The authors present a study of the production of K{sub s}{sup 0} and {Lambda}{sup 0} in inelastic p{bar p} collisions at {radical}s = 1800 and 630 GeV using data collected by the CDF experiment at the Fermilab Tevatron. Analyses of K{sub s}{sup 0} and {Lambda}{sup 0} multiplicity and transverse momentum distributions, as well as of the dependencies of the average number and (p{sub T}) of K{sub s}{sup 0} and {Lambda}{sup 0} on charged particle multiplicity are reported. Systematic comparisons are performed for the full sample of inelastic collisions, and for the low and high momentum transfer subsamples, at the two energies. The p{sub T} distributions extend above 8 GeV/c, showing a (p{sub T}) higher than previous measurements. The dependence of the mean K{sub s}{sup 0}({Lambda}{sup 0}) p{sub T} on the charged particle multiplicity for the three samples shows a behavior analogous to that of charged primary tracks.

We present the design and parameters of an energy recovery linac (ERL) facility, which is under construction in the Collider-Accelerator Department at BNL. This R&D facility has the goal of demonstrating CW operation of an ERL with an average beam current in the range of 0.1-1 ampere and with very high efficiency of energy recovery. The possibility of a future upgrade to a two-pass ERL is also being considered. The heart of the facility is a 5-cell 703.75 MHz super-conducting RF linac with strong Higher Order Mode (HOM) damping. The flexible lattice of the ERL provides a test-bed for exploring issues of transverse and longitudinal instabilities and diagnostics of intense CW electron beams. This ERL is also perfectly suited for a far-IR FEL. We present the status and plans for construction and commissioning of this facility.

A search for direct production of Higgs bosons in the di-tau decay mode is performed with 86.3 {+-} 3.5 pb{sup -1} of data collected with the Collider Detector at Fermilab during the 1994-1995 data taking period of the Tevatron. We search for events where one tau decays to an electron plus neutrinos and the other tau decays hadronically. We perform a counting experiment and set limits on the cross section for supersymmetric Higgs boson production where tan {beta} is large and m{sub A} is small. For a benchmark parameter space point where m{sub A{sup 0}} = 100 GeV/c{sup 2} and tan {beta} = 50, we limit the production cross section multiplied by the branching ratio to be less than 77.9 pb at the 95% confidence level compared to theoretically predicted value of 11.0 pb. This is the first search for Higgs bosons decaying to tau pairs at a hadron collider.