Articles about events that took place in Austin, Texas in April of 2005, including an in memoriam paragraph about John DeLorean.

Article about the Women on their Toes benefit, the Austin Museum of Art's annual Art Ball, and other events around Austin, Texas.

We present the first measurement of the A{sub 2} and A{sub 3} angular coefficients of the W boson produced in proton-antiproton collisions. We study W {yields} ev{sub e} and W {yields} {mu}{nu}{sub {mu}} candidate events produced in association with at least one jet at CDF, during Run Ia and Run Ib of the Tevatron at {radical}s = 1.8 TeV. The corresponding integrated luminosity was 110 pb{sup -1}. The jet balances the transverse momentum of the W and introduces QCD effects in W boson production. The extraction of the angular coefficients is achieved through the direct measurement of the azimuthal angle of the charged lepton in the Collins-Soper rest-frame of the W boson. The angular coefficients are measured as a function of the transverse momentum of the W boson. The electron, muon, and combined results are in good agreement with the Standard Model prediction, up to order {alpha}{sub s}{sup 2} in QCD.

Increasingly, ADC technology is being pressed into service for single single-shot instrumentation applications that were formerly served by vacuum-tube based oscilloscopes and streak cameras. ADC technology, while convenient, suffers significant performance impairments. Thus, in these demanding applications, a quantitative and accurate representation of these impairments is critical to an understanding of measurement accuracy. We have developed a phase-plane behavioral model, implemented it in SIMULINK and applied it to interleaved, high-speed ADCs (up to 4 gigasamples/sec). We have also developed and demonstrated techniques to effectively compensate for these impairments based upon the model.

The authors present a study of the production of K{sub s}{sup 0} and {Lambda}{sup 0} in inelastic p{bar p} collisions at {radical}s = 1800 and 630 GeV using data collected by the CDF experiment at the Fermilab Tevatron. Analyses of K{sub s}{sup 0} and {Lambda}{sup 0} multiplicity and transverse momentum distributions, as well as of the dependencies of the average number and (p{sub T}) of K{sub s}{sup 0} and {Lambda}{sup 0} on charged particle multiplicity are reported. Systematic comparisons are performed for the full sample of inelastic collisions, and for the low and high momentum transfer subsamples, at the two energies. The p{sub T} distributions extend above 8 GeV/c, showing a (p{sub T}) higher than previous measurements. The dependence of the mean K{sub s}{sup 0}({Lambda}{sup 0}) p{sub T} on the charged particle multiplicity for the three samples shows a behavior analogous to that of charged primary tracks.

This paper discusses the background reduction and rejection strategy of the Cryogenic Dark Matter Search (CDMS) experiment. Recent measurements of background levels from CDMS II at Soudan are presented, along with estimates for future improvements in sensitivity expected for a proposed SuperCDMS experiment at SNOLAB.

In this talk, we will present a QCD factorization theorem for the semi-inclusive deep-inelastic scattering with hadrons in the current fragmentation region detected at low transverse momentum.

A barrier bucket with very short or zero rf-barrier separation (relative to the barrier widths) has its synchrotron tune decreasing from a very large value towards the bucket boundary. As a result, chaotic region may form near the bucket center and extends outward under increasing modulation of rf voltage and/or rf phase. Application is made to those barrier buckets used in momentum mining at the Fermilab Recycler Ring.

Hard scattering in p-p collisions, discovered at the CERN ISR in 1972 by the method of leading particles, proved that the partons of Deeply Inelastic Scattering strongly interacted with each other. Further ISR measurements utilizing inclusive single or pairs of hadrons established that high p{sub T} particles are produced from states with two roughly back-to-back jets which are the result of scattering of constituents of the nucleons as described by Quantum Chromodynamics (QCD), which was developed during the course of these measurements. These techniques, which are the only practical method to study hard-scattering and jet phenomena in Au+Au central collisions at RHIC energies, are reviewed, as an introduction to present RHIC measurements.

None

The authors present a measurement of the top pair production cross section in p{bar p} collisions at {radical}s = 1.96 TeV. We collect a data sample with an integrated luminosity of 194 {+-} 11 pb{sup -1} with the CDF II detector at the Fermilab Tevatron. We use an artificial neural network technique to discriminate between top pair production and background processes in a sample of 519 lepton + jets events, which have one isolated energetic charged lepton, large missing transverse energy and at least three energetic jets. We measure the top pair production cross section to be {sigma}{sub t{bar t}} = 6.6 {+-} 1.1 {+-} 1.5 pb, where the first uncertainty is statistical and the second is systematic.

The PLEIADES (Picosecond Laser-Electron Interaction for the Dynamic Evaluation of Structures) facility provides tunable short x-ray pulses with energies of 30-140 keV and pulse durations of 0.3-5 ps by scattering an intense, ultrashort laser pulse off a 35-75 MeV electron beam. Synchronization of the laser and electron beam is obtained by using a photoinjector gun, and using the same laser system to generate the electrons and the scattering laser. The Ti Ti:Sapphire, chirped pulse amplification based 500 mJ, 50 fs, 810 nm scattering laser and the similar 300 {micro}J, 5 ps, 266 nm photoinjector laser systems are detailed. Additionally, an optical parametric chirped pulse amplification (OPCPA) system is studied as a replacement for part of the scattering laser front end. Such a change would significantly simplify the set-up the laser system by removing the need for active switching optics, as well as increase the pre-pulse contrast ratio which will be important when part of the scattering laser is used as a pump beam in pump-probe diffraction experiments using the ultrashort tunable x-rays generated as the probe.

None

An indirect method for determining cross sections for reactions proceeding through a compound nucleus is presented. Exploring indirect approaches for obtaining reaction cross sections is important since a large number of reactions relevant to astrophysics cannot be measured with currently available techniques. Of particular importance are reactions involving unstable nuclei. Some applications of the Surrogate nuclear reactions method are considered and challenges that need to be addressed are outlined.

Non-baryonic, or ''dark'', matter is believed to be a major component of the total mass budget of the universe. We review the candidates for particle dark matter and discuss the prospects for direct detection (via interaction of dark matter particles with laboratory detectors) and indirect detection (via observations of the products of dark matter self-annihilations), focusing in particular on the Galactic center, which is among the most promising targets for indirect detection studies. The gravitational potential at the Galactic center is dominated by stars and by the supermassive black hole, and the dark matter distribution is expected to evolve on sub-parsec scales due to interaction with these components. We discuss the dominant interaction mechanisms and show how they can be used to rule out certain extreme models for the dark matter distribution, thus increasing the information that can be gleaned from indirect detection searches.

We present a measurement of the top quark pair (t{bar t}) production cross section ({sigma}{sub t{bar t}}) in p{bar p} collisions at a center-of-mass energy of 1.96 TeV using 230 pb{sub -1} of data collected by the D0 detector at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), large missing transverse energy, and at least four jets, and extract the t{bar t} content of the sample based on the kinematic characteristics of the events. For a top quark mass of 175 GeV, we measure {sigma}{sub t{bar t}} = 6.7{sub -1.3}{sup +1.4}(stat){sub -1.1}{sup +1.6}(syst) {+-} 0.4(lumi)pb, in good agreement with the standard model prediction.

We summarize four of our group's high-risk/high-payoff research projects funded by the Intelligence Technology Innovation Center (ITIC) in conjunction with our DHS-funded pathogen informatics activities. These are (1) quantitative assessment of genomic sequencing needs to predict high quality DNA and protein signatures for detection, and comparison of draft versus finished sequences for diagnostic signature prediction; (2) development of forensic software to identify SNP and PCR-RFLP variations from a large number of viral pathogen sequences and optimization of the selection of markers for maximum discrimination of those sequences; (3) prediction of signatures for the detection of virulence, antibiotic resistance, and toxin genes and genetic engineering markers in bacteria; (4) bioinformatic characterization of virulence factors to rapidly screen genomic data for potential genes with similar functions and to elucidate potential health threats in novel organisms. The results of (1) are being used by policy makers to set national sequencing priorities. Analyses from (2) are being used in collaborations with the CDC to genotype and characterize many variola strains, and reports from these collaborations have been made to the President. We also determined SNPs for serotype and strain discrimination of 126 foot and mouth disease virus (FMDV) genomes. For (3), currently >1000 probes …

We report on a calculation of the next-to-leading order QCD corrections to the partonic cross sections contributing to single-inclusive high-p{sub T} hadron production in collisions of transversely polarized hadrons. We give some predictions for the double spin asymmetry A{sub TT}{sup {pi}} for the proposed experiments at RHIC and at the GSI.

Performance of a desiccant cooling system was evaluated in the context of combined heat and power (CHP). The baseline system incorporated a desiccant dehumidifier, a heat exchanger, an indirect evaporative cooler, and a direct evaporative cooler. The desiccant unit was regenerated through heat recovery from a gas-fired reciprocating internal combustion engine. The system offered sufficient sensible and latent cooling capacities for a wide range of climatic conditions, while allowing influx of outside air in excess of what is typically required for commercial buildings. Energy and water efficiencies of the desiccant cooling system were also evaluated and compared with those of a conventional system. The results of parametric assessments revealed the importance of using a heat exchanger for concurrent desiccant post cooling and regeneration air preheating. These functions resulted in enhancement of both the cooling performance and the thermal efficiency, which are essential for fuel utilization improvement. Two approaches for mixing of the return air and outside air were examined, and their impact on the system cooling performance and thermal efficiency was demonstrated. The scope of the parametric analyses also encompassed the impact of improving the indirect evaporative cooling effectiveness on the overall cooling system performance.

None

A zero net energy (ZNE) building produces as much energy on-site as it uses on an annual basis--using a grid-tied, net-metered photovoltaic (PV) system and active solar. The optimal path to ZNE extends from a base case to the ZNE building through a series of energy-saving building designs with minimal energy-related owning and operating costs. BEopt is a computer program designed to find optimal building designs along the path to ZNE. A user selects from among predefined options in various categories to specify options to be considered in the optimization. Energy savings are calculated relative to a reference. The reference can be either a user-defined base-case building or a climate-specific Building America Benchmark building automatically generated by BEopt. The user can also review and modify detailed information on all available options and the Building America Benchmark in a linked options library spreadsheet.

The energy performance of six high-performance buildings around the United States was monitored and evaluated by the NREL. The six buildings include the Visitor Center at Zion National Park, the NREL Thermal Test Facility, the Chesapeake Bay Foundation's Merrill Center, the BigHorn Home Improvement Center, the Cambria Office Building, and the Oberlin College Lewis Center.

The results of control measurements of extruded scintillating strip responses to a radioactive source Sr-90 are provided, and details of strip choice, preparation, and method of measurement are included. About four hundred one meter long extruded scintillating strips were measured at four different points. These results were essential for prototyping a tail catcher and muon tracker for a future international electron positron linear collider detector.

None