Article on the dissociation of water on defective carbon substrates.

Article on collective polarization effects in β-polyvinylidene fluoride and its copolymers with tri- and tetrafluoroethylene.

We summarize the status of the two U.S. feasibility studies carried out by the Neutrino Factory and Muon Collider Collaboration (NFMCC) along with recent improvements to Neutrino Factory design developed during the American Physical Society (APS) Neutrino Physics Study. Suggested accelerator topics for the International Scoping Study (ISS) are also indicated.

Path Integral Monte Carlo (PIMC) can reproduce the results of simple analytical calculations in which a single quantum particle is used to represent positronium within an idealized, spherical pore. Our calculations improve on this approach by explicitly treating the positronium as a two-particle e{sup -}, e{sup +} system interacting via the Coulomb interaction. We study the lifetime and the internal contact density, {kappa}, which controls the self-annihilation behavior, for positronium in model spherical pores, as a function of temperature and pore size. We compare the results with both PIMC and analytical calculations for a single-particle model.

For many rocks of high economic interest such as chalk,diatomite, tight gas sands or coal, nanometer scale resolution is neededto resolve the 3D-pore structure, which controls the flow and trapping offluids in the rocks. Such resolutions cannot be achieved with existingtomographic technologies. A new 3D imaging method, based on serialsectioning and using the Focused Ion Beam (FIB) technology has beendeveloped. FIB allows for the milling of layers as thin as 10 nanometersby using accelerated Ga+ ions to sputter atoms from the sample surface.After each milling step, as a new surface is exposed, a 2D image of thissurface is generated. Next, the 2D images are stacked to reconstruct the3D pore or grain structure. Resolutions as high as 10 nm are achievableusing this technique. A new image processing method uses directmorphological analysis of the pore space to characterize thepetrophysical properties of diverse formations. In addition to estimationof the petrophysical properties (porosity, permeability, relativepermeability and capillary pressures), the method is used for simulationof fluid displacement processes, such as those encountered in variousimproved oil recovery (IOR) approaches. Computed with the new methodcapillary pressure curves are in good agreement with laboratory data. Themethod has also been applied for visualization of the fluid distributionat various saturations …

An isomeric series of heterocyclic amines related to one found in heated muscle meats was investigated for properties that predict their measured mutagenic potency. Eleven of the 12 possible 2-amino-trimethylimidazopyridine (TMIP) isomers were tested for mutagenic potency in the Ames/Salmonella test with bacterial strain TA98, and resulted in a 600-fold range in potency. Structural, quantum chemical and hydropathic data were calculated on the parent molecules and the corresponding nitrenium ions of all of the tested isomers to establish models for predicting the potency of the unknown isomer. The regression model accounting for the largest fraction of the total variance in mutagenic potency contains four predictor variables: dipole moment, a measure of the gap between amine LUMO and HOMO energies, percent hydrophilic surface, and energy of amine LUMO. The most important determinants of high mutagenic potency in these amines are: (1) a small dipole moment, (2) the combination of b-face ring fusion and N3-methyl group, and (3) a lower calculated energy of the {pi} electron system. Based on predicted potency from the average of five models, the isomer not yet synthesized and tested is expected to have a mutagenic potency of 0.84 revertants/{micro}g in test strain TA98.

Hard scattering in p-p collisions, discovered at the CERN ISR in 1972 by the method of leading particles, proved that the partons of Deeply Inelastic Scattering strongly interacted with each other. Further ISR measurements utilizing inclusive single or pairs of hadrons established that high p{sub T} particles are produced from states with two roughly back-to-back jets which are the result of scattering of constituents of the nucleons as described by Quantum Chromodynamics (QCD), which was developed during the course of these measurements. These techniques, which are the only practical method to study hard-scattering and jet phenomena in Au+Au central collisions at RHIC energies, are reviewed, as an introduction to present RHIC measurements.

Rivers are generally supersaturated with respect to carbon dioxide, resulting in large gas evasion fluxes that can be a significant component of regional net carbon budgets. Amazonian rivers were recently shown to outgas more than ten times the amount of carbon exported to the ocean in the form of total organic carbon or dissolved inorganic carbon. High carbon dioxide concentrations in rivers originate largely from in situ respiration of organic carbon, but little agreement exists about the sources or turnover times of this carbon. Here we present results of an extensive survey of the carbon isotope composition ({sup 13}C and {sup 14}C) of dissolved inorganic carbon and three size-fractions of organic carbon across the Amazonian river system. We find that respiration of contemporary organic matter (less than 5 years old) originating on land and near rivers is the dominant source of excess carbon dioxide that drives outgassing in mid-size to large rivers, although we find that bulk organic carbon fractions transported by these rivers range from tens to thousands of years in age. We therefore suggest that a small, rapidly cycling pool of organic carbon is responsible for the large carbon fluxes from land to water to atmosphere in the …

This paper summarizes the status of worldwide Neutrino Factory R&D efforts. Activities are categorized as simulations, component development, and system tests. An indication of R&D tasks that remain to be accomplished is also given.

Differentially expressed genes are typically identified by analyzing the variation between replicate measurements. These procedures implicitly assume that there are no systematic errors in the data even though several sources of systematic error are known. Results-OpWise estimates the amount of systematic error in bacterial microarray data by assuming that genes in the same operon have matching expression patterns. OpWise then performs a Bayesian analysis of a linear model to estimate significance. In simulations, OpWise corrects for systematic error and is robust to deviations from its assumptions. In several bacterial data sets, significant amounts of systematic error are present, and replicate-based approaches overstate the confidence of the changers dramatically, while OpWise does not. Finally, OpWise can identify additional changers by assigning genes higher confidence if they are consistent with other genes in the same operon. Although microarray data can contain large amounts of systematic error, operons provide an external standard and allow for reasonable estimates of significance. OpWise is available at http://microbesonline.org/OpWise.

A 20-month field study was conducted to measure the energy performance of south-facing large-area tungsten-oxide absorptive electrochromic (EC) windows with a broad switching range in a private office setting. The EC windows were controlled by a variety of means to bring in daylight while minimizing window glare. For some cases, a Venetian blind was coupled with the EC window to block direct sun. Some tests also involved dividing the EC window wall into zones where the upper EC zone was controlled to admit daylight while the lower zone was controlled to prevent glare yet permit view. If visual comfort requirements are addressed by EC control and Venetian blinds, a 2-zone EC window configuration provided average daily lighting energy savings of 10 {+-} 15% compared to the reference case with fully lowered Venetian blinds. Cooling load reductions were 0 {+-} 3%. If the reference case assumes no daylighting controls, lighting energy savings would be 44 {+-} 11%. Peak demand reductions due to window cooling load, given a critical demand-response mode, were 19-26% maximum on clear sunny days. Peak demand reductions in lighting energy use were 0% or 72-100% compared to a reference case with and without daylighting controls, respectively. Lighting energy …

Plutonium, because of its radioactive nature, ages from the 'inside out' by means of self-irradiation damage and thus produces nanoscale internal defects. The self-irradiation induced defects come in the form of Frenkel-type defects (vacancies and self-interstitial atoms), helium in-growth, and defect clusters. At present there are neither experimental nor theoretical models describing the changes in the electronic structure caused by the aging in Pu. This fact appears to be associated primarily with the absence of reasonably convincing spectroscopic evidence of the changes. This paper demonstrates that Resonant Photoemission, a variant of Photoelectron Spectroscopy, has strong sensitivity to aging of Pu samples. The spectroscopic results are correlated with an extra-atomic screening model [1], and are shown to be the fingerprint of mesoscopic or nanoscale internal damage in the Pu physical structure. This means that a spectroscopic signature of internal damage due to aging in Pu has been established.

The IAEA Marine Environment Laboratory (IAEA-MEL) in Monaco has conducted intercomparison exercises on radionuclides in marine samples for many years as part of its contribution to the IAEA's program of Analytical Quality Control Services (AQCS). An important part of the AQCS program has been a production of Reference Materials (RMs) and their provision to radioanalytical laboratories. The RMs have been developed for different marine matrices (sediment, water, biota), with accuracy and precision required for the present state of the art of radiometrics and mass spectrometry methods. The RMs have been produced as the final products of world-wide intercomparison exercises organized during last 30 years. A total of 44 intercomparison exercises were undertaken and 39 RMs were produced for radionuclides in the marine environment. All required matrices (seawater, biota, sediment) have been covered with radionuclide concentrations ranging from typical environmental levels to elevated levels affected by discharges from nuclear reprocessing plants. The long-term availability of RMs (over 10 years) requires the use of very specific techniques to collect and pretreat large quantities of material (e.g., in excess of 100 kg) in order to ensure sample stability and homogenization of any analytes of interest. The production of a RM is therefore a …

We have been developing a semiconductor Compton telescope to explore the universe in the energy band from several tens of keV to a few MeV. We use a Si strip and CdTe pixel detector for the Compton telescope to cover an energy range from 60 keV. For energies above several hundred keV, the higher efficiency of CdTe semiconductor in comparison with Si is expected to play an important role as an absorber and a scatterer. In order to demonstrate the spectral and imaging capability of a CdTe-based Compton Telescope, we have developed a Compton telescope consisting of a stack of CdTe pixel detectors as a small scale prototype. With this prototype, we succeeded in reconstructing images and spectra by solving the Compton equation from 122 keV to 662 keV. The energy resolution (FWHM) of reconstructed spectra is 7.3 keV at 511 keV and 3.1 keV at 122 keV, respectively. The angular resolution obtained at 511 keV is measured to be 12.2{sup o}(FWHM).

None

An explosive bonding procedure for joining 9.5 mm thick niobium plate to 203 mm thick 6061-T651 Al plate has been developed in order to maximize the bond tensile and impact strengths and the amount of bonded material across the surface of the plate. This procedure improves upon previous efforts, in which the 9.5 mm thick niobium plate is bonded directly to 6061-T4 Al plate. In this improved procedure, thin Nb and Al interlayers are explosively clad between the thicker niobium and aluminum plates. Bonds produced using these optimized parameters display a tensile strength of approximately 255 MPa and an impact strength per unit area of approximately 0.148 J/mm{sup 2}. Specialized mechanical testing geometries and procedures are required to measure these bond properties because of the unique bond geometry. In order to ensure that differences in the thermal expansion coefficients of aluminum and niobium do not adversely affect the bond strength, the effects of thermal cycling at temperatures between -22 C and 45 C on the mechanical properties of these bonds have also been investigated by testing samples in both the as-received and thermal cycled conditions. Based on the results obtained from this series of mechanical tests, thermal cycling is shown …

A scheme for the solution of the time dependent Maxwell's equations on composite overlapping grids is described. The method uses high-order accurate approximations in space and time for Maxwell's equations written as a second-order vector wave equation. High-order accurate symmetric difference approximations to the generalized Laplace operator are constructed for curvilinear component grids. The modified equation approach is used to develop high-order accurate approximations that only use three time levels and have the same time-stepping restriction as the second-order scheme. Discrete boundary conditions for perfect electrical conductors and for material interfaces are developed and analyzed. The implementation is optimized for component grids that are Cartesian, resulting in a fast and efficient method. The solver runs on parallel machines with each component grid distributed across one or more processors. Numerical results in two- and three-dimensions are presented for the fourth-order accurate version of the method. These results demonstrate the accuracy and efficiency of the approach.

The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.

The long-term goal is to determine the mechanism of PETN crystallization and coarsening at the solid-vapor interface and to quantify the thermodynamic and kinetic parameters that control those processes. We achieve this goal by investigating the surface evolution of synthetic PETN single crystals using in situ atomic force microscopy (AFM) at various temperatures.

In-situ x-ray diffraction was used to study the response of single crystal iron under shock conditions. Measurements of the response of [001] iron showed a uniaxial compression of the initially bcc lattice along the shock direction by up to 6% at 13 GPa. Above this pressure, the lattice responded with a further collapse of the lattice by 15-18% and a transformation to a hcp structure. The in-situ measurements are discussed and results summarized.

We have shown that the study of dipole moments, both magnetic and electric, in storage rings offer unique opportunities in probing physics beyond the Standard Model (SM). Both methods use similar techniques (particle and spin precession in magnetic storage rings). We are currently investigating the systematic errors associated with the resonance electric dipole moment (EDM) method. So far it looks very promising.

Significant experimental and theoretical progress has been made in the U.S. heavy ion fusion program on high-current sources, injectors, transport, final focusing, chambers and targets for high energy density physics (HEDP) and inertial fusion energy (IFE) driven by induction linac accelerators. One focus of present research is the beam physics associated with quadrupole focusing of intense, space-charge dominated heavy-ion beams, including gas and electron cloud effects at high currents, and the study of long-distance-propagation effects such as emittance growth due to field errors in scaled experiments. A second area of emphasis in present research is the introduction of background plasma to neutralize the space charge of intense heavy ion beams and assist in focusing the beams to a small spot size. In the near future, research will continue in the above areas, and a new area of emphasis will be to explore the physics of neutralized beam compression and focusing to high intensities required to heat targets to high energy density conditions as well as for inertial fusion energy.

Urban areas tend to have higher air temperatures than their rural surroundings as a result of gradual surface modifications that include replacing the natural vegetation with buildings and roads. The term ''Urban Heat Island'' describes this phenomenon. The surfaces of buildings and pavements absorb solar radiation and become extremely hot, which in turn warm the surrounding air. Cities that have been ''paved over'' do not receive the benefit of the natural cooling effect of vegetation. As the air temperature rises, so does the demand for air-conditioning (a/c). This leads to higher emissions from power plants, as well as increased smog formation as a result of warmer temperatures. In the United States, we have found that this increase in air temperature is responsible for 5-10% of urban peak electric demand for a/c use, and as much as 20% of population-weighted smog concentrations in urban areas. Simple ways to cool the cities are the use of reflective surfaces (rooftops and pavements) and planting of urban vegetation. On a large scale, the evapotranspiration from vegetation and increased reflection of incoming solar radiation by reflective surfaces will cool a community a few degrees in the summer. As an example, computer simulations for Los Angeles, …

Urban areas tend to have higher air temperatures than their rural surroundings as a result of gradual surface modifications that include replacing the natural vegetation with buildings and roads. The term ''Urban Heat Island'' describes this phenomenon. The surfaces of buildings and pavements absorb solar radiation and become extremely hot, which in turn warm the surrounding air. Cities that have been ''paved over'' do not receive the benefit of the natural cooling effect of vegetation. As the air temperature rises, so does the demand for air-conditioning (a/c). This leads to higher emissions from power plants, as well as increased smog formation as a result of warmer temperatures. In the United States, we have found that this increase in air temperature is responsible for 5-10% of urban peak electric demand for a/c use, and as much as 20% of population-weighted smog concentrations in urban areas. Simple ways to cool the cities are the use of reflective surfaces (rooftops and pavements) and planting of urban vegetation. On a large scale, the evapotranspiration from vegetation and increased reflection of incoming solar radiation by reflective surfaces will cool a community a few degrees in the summer. As an example, computer simulations for Los Angeles, …