Design of a new aberration corrected Photoemission electron microscope PEEM3 at the Advanced Light Source is outlined. PEEM3 will be installed on an elliptically polarized undulator beamline and will be used for the study of complex materials at high spatial and spectral resolution. The critical components of PEEM3 are the electron mirror aberration corrector and aberration-free magnetic beam separator. The models to calculate the optical properties of the electron mirror are discussed. The goal of the PEEM3 project is to achieve the highest possible transmission of the system at resolutions comparable to our present PEEM2 system (50 nm) and to enable significantly higher resolution, albeit at the sacrifice of intensity. We have left open the possibility to add an energy filter at a later date, if it becomes necessary driven by scientific need to improve the resolution further.

Building designers and owners have always been fascinated with the extensive use of glass in building envelopes. Today the highly glazed facade has almost become an iconic element for a 'green building' that provides daylighting and a visual connection with the natural environment. Even before the current interest in green buildings there was no shortage of highly glazed building designs. But many of these buildings either rejected sunlight, and some associated daylight and view with highly reflective glazings or used highly transmissive glass and encountered serious internal comfort problems that could only be overcome with large HVAC systems, resulting in significant energy, cost and environmental penalties. From the 1960's to the 1990's innovation in glazing made heat absorbing glass, reflective glass and double glazing commonplace, with an associated set of aesthetic features. In the last decade there has been a subtle shift from trying to optimize an ideal, static design solution using these glazings to making the facade responsive, interactive and even intelligent. More sophisticated design approaches and technologies have emerged using new high-performance glazing, improved shading and solar control systems, greater use of automated controls, and integration with other building systems. One relatively new architectural development is the double …

The light-duty vehicle transportation sector in the United States depends heavily on imported petroleum as a transportation fuel. The Department of Energy’s Advanced Vehicle Testing Activity (AVTA) is testing advanced technology vehicles to help reduce this dependency, which would contribute to the economic stability and homeland security of the United States. These advanced technology test vehicles include internal combustion engine vehicles operating on 100% hydrogen (H2) and H2CNG (compressed natural gas) blended fuels, hybrid electric vehicles, neighborhood electric vehicles, urban electric vehicles, and electric ground support vehicles. The AVTA tests and evaluates these vehicles with closed track and dynamometer testing methods (baseline performance testing) and accelerated reliability testing methods (accumulating lifecycle vehicle miles and operational knowledge within 1 to 1.5 years), and in normal fleet environments. The Arizona Public Service Alternative Fuel Pilot Plant and H2-fueled vehicles are demonstrating the feasibility of using H2 as a transportation fuel. Hybrid, neighborhood, and urban electric test vehicles are demonstrating successful applications of electric drive vehicles in various fleet missions. The AVTA is also developing electric ground support equipment (GSE) test procedures, and GSE testing will start during the fall of 2003. All of these activities are intended to support U.S. energy independence. …

The U. S. Advanced Fuel Cycle Initiative (AFCI) seeks to develop and demonstrate the technologies needed to transmute the long-lived transuranic actinide isotopes contained in spent nuclear fuel into shorter-lived fission products, thereby dramatically decreasing the volume of material requiring disposition and the long-term radiotoxicity and heat load of high-level waste sent to a geologic repository (DOE, 2003). One important component of the technology development is actinide-bearing transmutation fuel forms containing plutonium, neptunium, americium (and possibly curium) isotopes. There are little irradiation performance data available on non-fertile fuel forms, which would maximize the destruction rate of plutonium, and low-fertile (i.e., uranium-bearing) fuel forms, which would support a sustainable nuclear energy option. Initial scoping level irradiation tests on a variety of candidate fuel forms are needed to establish a transmutation fuel form design and evaluate deployment of transmutation fuels.

ALEGRA is an arbitrary Lagrangian-Eulerian finite element code that emphasizes large distortion and shock propagation in inviscid fluids and solids. This document describes user options for modeling magnetohydrodynamic, thermal conduction, and radiation emission effects.

Public key cryptographic algorithms provide data authentication and non-repudiation for electronic transmissions. The mathematical nature of the algorithms, however, means they require a significant amount of computation, and encrypted messages and digital signatures possess high bandwidth. Accordingly, there are many environments (e.g. wireless, ad-hoc, remote sensing networks) where public-key requirements are prohibitive and cannot be used. The use of elliptic curves in public-key computations has provided a means by which computations and bandwidth can be somewhat reduced. We report here on the research conducted in an LDRD aimed to find even more efficient algorithms and to make public-key cryptography available to a wider range of computing environments. We improved upon several algorithms, including one for which a patent has been applied. Further we discovered some new problems and relations on which future cryptographic algorithms may be based.

Photograph of individuals preparing for a parade hosted by the Mexic-Arte Museum in honor of Día de los Muertos, or Day of the Dead. Black and white photographs and paper flowers are arranged on an altar. A woman wearing skeleton face makeup and a traditionally embroidered skirt stands in front of the altar. The photograph was taken at nighttime in downtown Austin, Texas.

Photograph of altars at a parade hosted by the Mexic-Arte Museum in honor of Día de los Muertos (Day of the Dead). The space is set up like a graveyard. Each altar is contained within a square of colored fabric. The photograph was taken at nighttime in downtown Austin, Texas.

Photograph of altars at a parade hosted by the Mexic-Arte Museum in honor of Día de los Muertos (Day of the Dead). The space is set up like a graveyard. Each altar is contained within a square of colored fabric. Individuals walk around the space. In the foreground a man stands on a ladder as he decorates a metal frame with yellow tape. The photograph was taken at dusk in downtown Austin, Texas.

Quarterly magazine with articles on recent additions to the Clean Cities Alternative Fuel Station Locator database, biodiesel buying co-ops, and developing the CNG infrastructure in Bangladesh. Also a memo from CIVITAS 2003.

In 2001, American Water Heater Company implemented a system-level improvement project on the compressed air system that serves its manufacturing plant in Johnson City, Tennessee. The plant now operates with less compressor capacity, which has reduced its energy consumption and maintenance needs. The project's total cost was $228,000. The annual compressed air energy savings (2,345,000 kWh) and maintenance savings total $160,000, yielding a simple payback of 17 months. Furthermore, the system now supports the plant's production processes more effectively, which has improved product quality and increased production.

N/A

A description of work completed at NERSC over the past 6 months to identify and remedy asymmetries in the batch compute resources provided by NERSC's IBM SP seaborg.nersc.gov.

OAK-B135 As an element in the US Advanced Power Extraction (APEX) program, they evaluated the design option of using advanced nanocomposite ferritic steel (AFS) as the structural material and Flibe as the tritium breeder and coolant. They selected the recirculating flow configuration as the reference design. Based on the material properties of AFS, they found that the reference design can handle a maximum surface heat flux of 1 MW/m{sup 2}, and a maximum neutron wall loading of 5.4 MW/m{sup 2}, with a gross thermal efficiency of 47%, while meeting all the tritium breeding and structural design requirements. This paper covers the results of the following areas of evaluation: materials selection, first wall and blanket design configuration, materials compatibility, components fabrication, neutronics analysis, thermal hydraulics analysis including MHD effects, structural analysis, molten salt and helium closed cycle power conversion system, and safety and waste disposal of the recirculating coolant design.

This report describes a passive, optical component called resonant subwavelength gratings (RSGs), which can be employed as one element in an RSG array. An RSG functions as an extremely narrow wavelength and angular band reflector, or mode selector. Theoretical studies predict that the infinite, laterally-extended RSG can reflect 100% of the resonant light while transmitting the balance of the other wavelengths. Experimental realization of these remarkable predictions has been impacted primarily by fabrication challenges. Even so, we will present large area (1.0mm) RSG reflectivity as high as 100.2%, normalized to deposited gold. Broad use of the RSG will only truly occur in an accessible micro-optical system. This program at Sandia is a normal incidence array configuration of RSGs where each array element resonates with a distinct wavelength to act as a dense array of wavelength- and mode-selective reflectors. Because of the array configuration, RSGs can be matched to an array of pixels, detectors, or chemical/biological cells for integrated optical sensing. Micro-optical system considerations impact the ideal, large area RSG performance by requiring finite extent devices and robust materials for the appropriate wavelength. Theoretical predictions and experimental measurements are presented that demonstrate the component response as a function of decreasing RSG …

It has been recognized that documentation for new customers of ASCI Red, aka janus or the Intel Teraflops at Sandia National Laboratories, has been sadly lacking. This document has been prepared by a team of subject matter experts to fill that void and to provide a starting point for providing a similar document for ASCI Red Storm in the future. This document is intended for SNL users who need to jumpstart their use of Janus and Janus-s.

This report documents a study by Sandia's Systems Analysis Group to assess the status of, and need for, shipping containers to support the mission of National Nuclear Security Administration's Office of Defense Program. The focus of the study evolved into determining the status of existing packages relative to Federal Regulations for the Department of Transportation and Nuclear Regulatory Commission. Proposed regulatory changes will mandate the elimination or restricted use of many current DP packages. This study clarifies numerous misconceptions regarding these regulatory changes and status of packages relative to them. We have proposed guidelines for new package development based on the regulatory status of existing packages. Additionally, we have identified attributes that will make new packagings more amenable to accommodating new contents. This will allow the new packagings to better fill voids in container needs that are recognized but unable to be characterized at this time.

A new generation of irreversible, chemically reacting getters specifically targeted toward assuring the integrity of the local environment within microsystem packages were developed and evaluated. These reactive getters incorporate volatile species into a polymer through covalent bonds, thus producing a non-volatile product. These reactive getters will be combined with getters that rely on absorption media (e.g. zeolites and high surface area carbon fibers) to scavenge non-reactive species, like solvents. Our getter systems will rely on device packaging to limit exchange between the microsystem and the global environment. Thus, the internal getters need only provide local environmental control within the microsystem package. A series of experiments were conducted to determine uptake rates and capacities absorption and reactive-based getters. Diffusion rates through the binder used to hold the getter particles together were also investigated. Getters were evaluated in environments with a saturated headspace and with a limited amount of the volatile species of interest. One- and two-dimensional numerical models and analysis techniques have been developed and used to predict the transport of contaminant species within a representative microsystem package consisting of an open gas-filled volume adjacent to a polymer layer containing embedded particles of getter. The two-dimensional model features explicit representation of …

This report describes the technical progress made on the Pittsburgh Air Quality Study (PAQS) during the period of March 2003 through August 2003. Significant progress was made this project period on the source characterization, source apportionment, and deterministic modeling activities. Major accomplishments included: Development of an emission profile for an integrated coke production facility and simulations using PMCAMx for a two week period during July 2001. The emissions from the coke facility are dominated by carbonaceous compounds. Forty seven percent of the organic carbon mass was identified on a compound level basis. Polycyclic aromatic hydrocarbons were the dominant organic compound class in the coke emissions. Initial comparisons with the data collected in Pittsburgh suggest good agreement between the model predictions and observations. Single particle composition data appear useful for identifying primary sources. An example of this unique approach is illustrated using the Fe and Ce particle class with appear associated with steel production.

Guidance issued by the General Accounting Office with an abstract that begins "This publication supersedes GAO-03-678G, Audit Guide: Auditing and Investigating the Internal Control of Government Purchase Card Programs, May 2003. The federal government of the United States--the largest and most complex organization in the world--expended approximately $15 billion through federal organizations' purchase card programs in fiscal year 2002. As the steward of taxpayer dollars, federal agencies are accountable for how purchase cards are used and how the funds are spent. To that end, federal agencies are responsible for establishing and maintaining internal control to provide reasonable assurance that (1) the goals and objectives of the purchase card program are met and (2) safeguards against fraudulent, improper, and abusive purchases are adequate. Recent congressional testimony and inspector general and GAO reports show that some federal agencies do not have adequate internal control over their purchase card programs. Without effective internal control, management has little assurance that fraudulent, improper, and abusive purchases are being prevented or, if occurring, are being promptly detected with appropriate corrective actions taken. A key element of internal control is monitoring that assesses the quality of performance over time and ensures that the findings of audits and …

This report summarizes the accomplishments of the Laboratory Directed Research and Development (LDRD) project 26546 at Sandia, during the period FY01 through FY03. The project team visited four DoD depots that support extensive aircraft maintenance in order to understand critical needs for automation, and to identify maintenance processes for potential automation or integration opportunities. From the visits, the team identified technology needs and application issues, as well as non-technical drivers that influence the application of automation in depot maintenance of aircraft. Software tools for automation facility design analysis were developed, improved, extended, and integrated to encompass greater breadth for eventual application as a generalized design tool. The design tools for automated path planning and path generation have been enhanced to incorporate those complex robot systems with redundant joint configurations, which are likely candidate designs for a complex aircraft maintenance facility. A prototype force-controlled actively compliant end-effector was designed and developed based on a parallel kinematic mechanism design. This device was developed for demonstration of surface finishing, one of many in-contact operations performed during aircraft maintenance. This end-effector tool was positioned along the workpiece by a robot manipulator, programmed for operation by the automated planning tools integrated for this project. Together, …

The Washington Department of Fish and Wildlife implemented the Banks Lake Fishery Evaluation Project (BLFEP) in September 2001 with funds from the Bonneville Power Administration. Fiscal Year (FY) 2001 of the BLFEP was used to gather historic information, establish methods and protocols, collect limnology data, and conduct the first seasonal fish surveys. FY 2002 was used to continue seasonal fish and lakewide creel surveys and adjust methods and protocols as needed. Water quality parameters were collected monthly from February to May and bi-monthly from June to August. Banks Lake water temperatures began to increase in April and stratification was apparent by June at all 3 limnology collection sites. By late August, the thermocline had dropped to nearly 20 meters deep, with 16-17 C temperatures throughout the epilimnion. Dissolved oxygen levels were generally above 10 mg/L until August when dissolved oxygen dropped near or below 5 mg/L below 20-meters deep. Secchi depths ranged from 2.5-8 meters and varied by location and date. Nearshore and offshore fish surveys were conducted in October 2002 and May and July 2003 using boat electrofishing, fyke net, gill net, and hydroacoustic surveys. Yellow Perch Perca flavescens (32 %) and cottid spp. (22 %) dominated the nearshore …

During the 2002 - 2003 wind season, several new algorithms were tested on the Controls Advanced Research Turbine (CART) at the National Renewable Energy Laboratory. These include an''Optimally Tracking Rotor'' algorithm proposed before, an adaptive power tracking algorithm and several full-state feedback systems. General results from these algorithms are presented here with detailed results presented elsewhere.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.