An overview of the current status of the Main Injector Neutrino Oscillation Search (MINOS) is presented. MINOS is a long-baseline experiment with two detectors situated in North America. The near detector is based at the emission point of the NuMI beam at Fermilab, Chicago, the far detector is 735 km downstream in a disused iron mine in Soudan, Minnesota. A third detector, the calibration detector, is used to cross-calibrate these detectors by sampling different particle beams at CERN. A detailed description of the design and construction of the light-injection calibration system is included. Also presented are experimental investigations into proton-carbon collisions at 158 GeV/c carried out with the NA49 experiment at CERN. The NA49 experiment is a Time Projection Chamber (TPC) based experiment situated at CERN's North Area. It is a well established experiment with well known characteristics. The data gained from this investigation are to be used to parameterize various hadronic production processes in accelerator and atmospheric neutrino production. These hadronic production parameters will be used to improve the neutrino generation models used in calculating the neutrino oscillation parameters in MINOS.

Two ionic and one neutral methyl(oxo)rhenium(V) compounds were synthesized and structurally characterized. They were compared in reactivity towards the ligands triphenylphosphane, pyridines, pyridine N-oxides. Assistance from Broensted bases was found on ligand displacement of ionic rhenium compounds as well as nucleophile assistance on oxidation of all compounds. From the kinetic data, crystal structures, and an analysis of the intermediates, a structural formula of PicH{sup +}3{sup -} and mechanisms of ligand displacement and oxidation were proposed.

The Matteucci effect, which mainly manifests itself as the change of magnetization of a material with torsional stress, is currently of great technological interest because of the search for magnetic torque sensors. Magnetic torque sensors are important to future improvements of automobiles and industrial robots. It is well known that the magnetic state of a material depends on both the external magnetic field and external stress which causes strain and change in magnetization of the material. The former phenomenon has been well understood in both theory and application. However, the magnetic state dependence of stress is not adequately understood and the experimental data is of limited extent. In this project, the Matteucci effect in iron, cobalt, nickel and permalloy rods has been documented when they were in magnetic remanence status along the axis and nickel ring when they were in remanence status along the circumference. The effect of annealing on the magnetomechanical effect in nickel and the temperature dependence of the magnetomechanical sensitivity has also been examined. Factors related to the sensitivity at equilibrium condition have been theoretically developed. it is found in the experiments that the mechanism of magnetic domain wall movement plays an important role rather than the …

This dissertation describes the efforts to design and implement the Generalized Portable SHMEM library, GPSHMEM, as well as supplementary tools. There are two major components of the GPSHMEM project: the GPSHMEM library itself and the Fortran 77 source-to-source translator. The rest of this thesis is divided into two parts. Part I introduces the shared memory model and the distributed shared memory model. It explains the motivation behind GPSHMEM and presents its functionality and performance results. Part II is entirely devoted to the Fortran 77 translator call fgpp. The need for such a tool is demonstrated, functionality goals are stated, and the design issues are presented along with the development of the solutions.

Organic light emitting devices (OLEDs) are among the most promising for flat panel display technologies. They are light, bright, flexible, and cost effective. And while they are emerging in commercial product, their low power efficiency and long-term degradation are still challenging. The aim of this work was to investigate their device physics and improve their performance. Violet and blue OLEDs were studied. The devices were prepared by thermal vapor deposition in high vacuum. The combinatorial method was employed in device preparation. Both continuous wave and transient electroluminescence (EL) were studied. A new efficient and intense UV-violet light emitting device was developed. At a current density of 10 mA/cm{sup 2}, the optimal radiance R could reach 0.38 mW/cm{sup 2}, and the quantum efficiency was 1.25%. using the delayed EL technique, electron mobilities in DPVBi and CBP were determined to be {approx} 10{sup -5} cm{sup 2}/Vs and {approx} 10{sup -4} cm{sup 2}/Vs, respectively. Overshoot effects in the transient El of blue light emitting devices were also observed and studied. This effect was attributed to the charge accumulation at the organic/organic and organic/cathode interfaces.

The work presented in this dissertation has investigated three distinct areas of interest in the field of quasicrystals: bulk structure, transport properties, and electronic structure. First, they have described the results of a study which explored the fundamental interactions between the atomic species of the icosahedral Al-Pd-Mn quasicrystal. The goal of this work was to determine whether the pseudo-MacKay or Bergman type clusters have a special stability or are merely a geometric coincidence. This was carried out by using laser vaporization to produce gas-phase metal clusters, which were analyzed using time-of-flight mass spectrometry. Both the kinetic and thermodynamic stabilities of the clusters were probed. The data indicated no special stability for either pseudo-MacKay or Bergman type clusters as isolated units. This, however, is not proof that these clusters are simply a geometric coincidence. It is possible that such clusters only have stability in the framework of the bulk matrix and do not exist as isolated units. Next, they have reported their investigations of the bulk thermal transport properties of a decagonal Al-Ni-Co two dimensional quasicrystal in the temperature range 373K-873K. The properties of a sample oriented along the periodic axis and another oriented along the aperiodic axis were measured. A …

A magnetic tunnel junction is a device that changes its electrical resistance with a change in an applied magnetic field. A typical junction consists of two magnetic electrodes separated by a nonmagnetic insulating layer. The magnetizations of the two electrodes can have two possible extreme configurations, parallel and antiparallel. The antiparallel configuration is observed to have the higher measured resistance and the parallel configuration has the lower resistance. To switch between these two configurations a magnetic field is applied to the device which is primarily used to change the orientation of the magnetization of one electrode usually called the free layer, although with sufficient high magnetic field the orientation of the magnetizations of both of the electrodes can be changed. The most commonly used models for describing and explaining the electronic behavior of tunnel junctions are the Simmons model and the Brinkman model. However, both of these models were designed for simple, spin independent tunneling. The Simmons model does not address the issue of applied magnetic fields nor does it address the form of the electronic band structure in the metallic electrodes, including the important factor of spin polarization. The Brinkman model is similar, the main difference between the two …

Capillary electrophoresis (CE) offers many advantages over conventional analytical methods, such as speed, simplicity, high resolution, low cost, and small sample consumption, especially for the separation of enantiomers. However, chiral method developments still can be time consuming and tedious. They designed a comprehensive enantioseparation protocol employing neutral and sulfated cyclodextrins as chiral selectors for common basic, neutral, and acidic compounds with a 96-capillary array system. By using only four judiciously chosen separation buffers, successful enantioseparations were achieved for 49 out of 54 test compounds spanning a large variety of pKs and structures. Therefore, unknown compounds can be screened in this manner to identify optimal enantioselective conditions in just one rn. In addition to superior separation efficiency for small molecules, CE is also the most powerful technique for DNA separations. Using the same multiplexed capillary system with UV absorption detection, the sequence of a short DNA template can be acquired without any dye-labels. Two internal standards were utilized to adjust the migration time variations among capillaries, so that the four electropherograms for the A, T, C, G Sanger reactions can be aligned and base calling can be completed with a high level of confidence. the CE separation of DNA can be …

None

CFD (Computational Fluid Dynamics) is a widely used technique in engineering design field. It uses mathematical methods to simulate and predict flow characteristics in a certain physical space. Since the numerical result of CFD computation is very hard to understand, VR (virtual reality) and data visualization techniques are introduced into CFD post-processing to improve the understandability and functionality of CFD computation. In many cases CFD datasets are very large (multi-gigabytes), and more and more interactions between user and the datasets are required. For the traditional VR application, the limitation of computing power is a major factor to prevent visualizing large dataset effectively. This thesis presents a new system designing to speed up the traditional VR application by using parallel computing and distributed computing, and the idea of using hand held device to enhance the interaction between a user and VR CFD application as well. Techniques in different research areas including scientific visualization, parallel computing, distributed computing and graphical user interface designing are used in the development of the final system. As the result, the new system can flexibly be built on heterogeneous computing environment, dramatically shorten the computation time.

The oxidation resistance of a high-temperature alloy is dependent upon sustaining the formation of a protective scale, which is strongly related to the alloying composition and the oxidation condition. The protective oxide scale only provides a finite period of oxidation resistance owing to its eventual breakdown, which is especially accelerated under thermal cycling conditions. This current study focuses on the long-term cyclic oxidation behavior of a number of commercial wrought alloys. The alloys studied were Fe- and Ni-based, containing different levels of minor elements, such as Si, Al, Mn, and Ti. Oxidation testing was conducted at 1000 and 1100 C in still air under both isothermal and thermal cycling conditions (1-day and 7-days). The specific aspects studied were the oxidation behavior of chromia-forming alloys that are used extensively in industry. The current study analyzed the effects of alloying elements, especially the effect of minor element Si, on cyclic oxidation resistance. The behavior of oxide scale growth, scale spallation, subsurface changes, and chromium interdiffusion in the alloy were analyzed in detail. A novel model was developed in the current study to predict the life-time during cyclic oxidation by simulating oxidation kinetics and chromium interdiffusion in the subsurface of chromia-forming alloys.

The scientific community has recently experienced an overall effort to reduce the physical size of many experimental components to the nanometer size range. This size is unique as the characteristics of this regime involve aspects of pure physics, biology, and chemistry. One extensively studied example of a nanometer sized experimental component, which acts as a junction between these three principle scientific theologies, is deoxyribonucleic acid (DNA) or ribonucleic acid (RNA). These biopolymers not only contain the biological genetic guide to code for the production of life-sustaining materials, but are also being probed by physicists as a means to create electrical circuits and furthermore as controllable architectural and sensor motifs in the chemical disciplines. Possibly the most common nano-sized component between these sciences are nanoparticles composed of a variety of materials. The cross discipline employment of nanoparticles is evident from the vast amount of literature that has been produced from each of the individual communities within the last decade. Along these cross-discipline lines, this dissertation examines the use of several different types of nanoparticles with a wide array of surface chemistries to understand their adsorption properties and to construct unique miniaturized analytical and immunoassay platforms. This introduction will act as a …

This thesis presents a measurement of the cross-section of the purely electromagnetic production of e{sup +}e{sup -} pairs accompanied by mutual nuclear Coulomb excitation AuAu {yields} Au*Au* + e{sup +}e{sup -}, in ultra-peripheral gold-gold collisions at RHIC at the center-of-mass collision energy of {radical}S{sub NN} = 200 GeV per nucleon. These reactions were selected by detecting neutron emission by the excited gold ions in the Zero Degree Calorimeters. The charged tracks in the e{sup +}e{sup -} events were reconstructed with the STAR Time Projection Chamber. The detector acceptance limits the kinematical range of the observed e{sup +}e{sup -} pairs; therefore the measured cross-section is extrapolated to 4{pi} with the use of Monte Carlo simulations. We have developed a Monte Carlo simulation for ultra-peripheral e{sup +}e{sup -} production at RHIC based on the Equivalent Photon Approximation, the lowest-order QED e{sup +}e{sup -} production cross-section by two real photons and the assumption that the mutual nuclear excitations and the e{sup +}e{sup -} production are independent (EPA model). We compare our experimental results to two models: the EPA model and a model based on full QED calculation of the e{sup +}e{sup -} production, taking the photon virtuality into account. The measured differential cross-section …

Three different types of cage crown ethers have been prepared and their complexation properties with Ag(I) have been studied. Atomic absorption, fluorescence quenching, and UV absorption have been used to study the interaction between the hosts (cage crown ethers) and guests (Ag+). For the cage-annulated crown ethers that contain aromatic rings, cation-π and π-π interactions may contribute significantly to the overall complexation ability of the host system. Piperazine groups may cooperate, and the piperazine nitrogen atoms provide unshared electrons, which may form a complex with Ag+. In addition, relatively soft donor atoms (e.g., Br) are well-suited for complexation with Ag+, which is a softer Lewis acid than alkali metal cations.

The study utilized the covariance structure comparison methodology - Multigroup Analysis in Structural Equation Modeling - evaluating measurement equivalence of English and Spanish versions of an employee opinion survey. The concept of measurement equivalence was defined as consisting of four components: sample equivalence, semantic equivalence, conceptual equivalence and scalar equivalence. The results revealed that the two language versions of the survey exhibited acceptable measurement equivalence across five survey dimensions Communications, Supervision, Leadership, Job Content & Satisfaction and Company Image & Commitment. Contrary to the study second hypothesis, there was no meaningful difference in opinion scores between English-speaking and Spanish-speaking respondents on the latent construct of Job Content & Satisfaction.

This study investigated the effects of test length (10, 20 and 30 items), scoring schema (proportion of dichotomous ad polytomous scoring) and item analysis model (IRT and Rasch) on the ability estimates, test information levels and optimization criteria of mixed item format tests. Polytomous item responses to 30 items for 1000 examinees were simulated using the generalized partial-credit model and SAS software. Portions of the data were re-coded dichotomously over 11 structured proportions to create 33 sets of test responses including mixed item format tests. MULTILOG software was used to calculate the examinee ability estimates, standard errors, item and test information, reliability and fit indices. A comparison of IRT and Rasch item analysis procedures was made using SPSS software across ability estimates and standard errors of ability estimates using a 3 x 11 x 2 fixed factorial ANOVA. Effect sizes and power were reported for each procedure. Scheffe post hoc procedures were conducted on significant factos. Test information was analyzed and compared across the range of ability levels for all 66-design combinations. The results indicated that both test length and the proportion of items scored polytomously had a significant impact on the amount of test information produced by mixed item …

No Way Out: A Historical Documentary is the written companion to a forty-minute documentary film entitled "No Way Out". The film deals with a 1974 inmate standoff at a prison in Huntsville, Texas known as the Carrasco Incident. The film examines the prison takeover through the eyes of those who lived through it. Composed of five interviews, "No Way Out" is a compilation of various points of view ranging from former hostages, members of the press, and law enforcement. The written companion for this piece discusses the three phases of the production for this film. These chapters are designed to share with the reader the various intricacies of documentary filmmaking. The thesis also explores theoretical issues concerning collective memory, coping behavior, and the ethics of historical documentary filmmaking.

The purpose of this study was to explore the practices of formal and informal teacher technologists in two school settings: an elite private, high school academy and an urban poor, middle school academy. This investigation included clarifying the role of the formal and informal teacher technologist and investigating the need for both formal and informal teacher technologists. This study also explored the technological differences between the public academy middle school and the private academy high school. Two formal and eight informal teacher technologists were interviewed face-to-face three times, each using the transcendental phenomenology research design. Each teacher technologist was also observed at least once in classroom and teacher training sessions. The results of this study revealed (1) the role of the teacher technologist was a fast technology problem solver; and (2) although students and teachers used technology, the schools lagged in adequate technology and/or teacher training; (3) the teacher technologists used the Internet to build and evaluate curriculum; (4) most students used tool software centered around project-based activities; (5) teacher technologists trained other teachers to be collaborative risk-takers in using technology; (6) teacher technologists shared what they learn with students and other teachers; and (7) students could be student-learners or …

Guided by the life course perspective, this study examined the frequency of caregiving provided by older adults to kin and non-kin. A telephone survey produced a random sample of adults 60 years of age and older, which was predominantly White, with higher income and education levels (n = 278). Bivariate and multivariate analyses tested the impact of demographic characteristics and other variables, conceptualized as physical, human, and social capital, on the frequency of caregiving. Gender, age, health, limitations, education, income, household composition, social contact, and reciprocity were analyzed in multinomial logistic regressions. Caregiving was defined as care provided to sick or disabled persons, with frequency of providing care classified as often, sometimes, and never. The majority of older adults provided at least some care to others over a one-year period, with almost one-third doing so often and only one-quarter never doing so. Most provided care to more than one person, with over one-quarter providing care to multiple friends only. Age failed to predict caregiving involvement when physical and social capital variables were considered. The odds of often providing care are higher for women, although gender did not predict those who never provided care. Having at least some college only significantly …

The widely used vector model maintains its popularity because of its simplicity, fast speed, and the appeal of using spatial proximity for semantic proximity. However, this model faces a disadvantage that is associated with the vagueness from keywords overlapping. Efforts have been made to improve the vector model. The research on improving document representation has been focused on four areas, namely, statistical co-occurrence of related items, forming term phrases, grouping of related words, and representing the content of documents. In this thesis, we propose the idea-indexing model to improve document representation for the filtering task in IR. The idea-indexing model matches document terms with the ideas they express and indexes the document with these ideas. This indexing scheme represents the document with its semantics instead of sets of independent terms. We show in this thesis that indexing with ideas leads to better performance.

The problem of establishing the correct approach to complexity is a very hot and crucial issue to which this dissertation gives some contributions. This dissertation considers two main possibilities, one, advocated by Tsallis and co-workers, setting the foundation of complexity on a generalized, non-extensive , form of thermodynamics, and another, proposed by the UNT Center for Nonlinear Science, on complexity as a new condition that, for physical systems, would be equivalent to a state of matter intermediate between dynamics and thermodynamics. In the first part of this dissertation, the concept of Kolmogorov-Sinai entropy is introduced. The Pesin theorem is generalized in the formalism of Tsallis non-extensive thermodynamics. This generalized form of Pesin theorem is used in the study of two major classes of problems, whose prototypes are given by the Manneville and the logistic map respectively. The results of these studies convince us that the approach to complexity must be made along lines different from those of the non-extensive thermodynamics. We have been convinced that the Lévy walk can be used as a prototype model of complexity, as a condition of balance between order and randomness that yields new phenomena such as aging, and multifractality. We reach the conclusions that …

The focus of my work is the incorporation of three-dimensional sculptural forms into the design of my garments while still maintaining the functional purpose of the garment. Origami paper folding is the inspiration for the sculptural forms. The major endeavor was to explore and solve the relationship between the organic human forms and the geometric forms created by the origami paper folds. This presented a challenge of exact precision. During this process, I experimented with different fabrics, which can accommodate the sharp creases and retain the shape. A variety of folding patterns were also explored. Although the design should be innovative and creative, the final garment must be wearable and comfortable.

This thesis is an examination of "paranoid conspiracy" films, a film noir subgenre that emerged in mainstream American cinema in the early 1970s and turns on vast, shadowy conspiracies located within U.S. "power structures" (government agencies, the military, the media) and directed against the American public. Specifically, it focuses on the emergence of these films in the 1970s, their almost complete disappearance during the Reagan presidency, and subsequent reemergence in the early 1990s. Placing representative texts in the context of U.S. political and social reality of the last three decades, it analyzes the relationship between the conspiracy theory genre, the "crisis of confidence" in the American society, and the process of formation of American national identity.

The Pink Papers is a collection of three short stories and a novel in progress consisting of four chapters. Each piece is a work of original fiction. The preface addresses the female writer and the female voice in fiction. "Broken Clock" and "Pink Paper" are the stories of two girls coping with endometriosis. "Normal Capacity" looks at the loss of a dream through the eyes of a first-year law student. The novel in progress, titled Blanchard, OK, is set in a rural farming town in Oklahoma. The novel tells the stories of 24-year-old Robin, her Aunt Paula, and Paula's boyfriend, Sam.