This 2001 Facility Work Plan (FWP) has been prepared as required by Module VII, Section VII.M.1 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit, NM4890139088-TSDF (the Permit); (NMED, 1999a), and incorporates comments from the New Mexico Environment Department (NMED) received on December 6, 2000 (NMED, 2000a). This February 2001 FWP describes the programmatic facility-wide approach to future investigations at Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) specified in the Permit. The permittees are evaluating data from previous investigations of the SWMUs and AOCs against the newest guidance proposed by the NMED. Based on these data, the permittees expect that no further sampling will be required and that a request for No Further Action (NFA) at the SWMUs and AOCs will be submitted to the NMED. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) specified in Module VII of the Permit, current NMED guidance identifies an Accelerated Corrective Action Approach (ACAA) that may be used for any SWMU or AOC (NMED, 1998). This …

The water quality of discharge from the surface water system is ultimately dictated by land use and climate within the watershed. Water quality has vastly improved from point source reduction measures, yet, non-point source pollutants continue to rise. 30 to 40% of rivers still do not meet water quality standards for reasons that include impact from urban storm water runoff, agricultural and livestock runoff, and loss of wetlands. Regulating non-point source pollutants proves to be difficult since specific dischargers are difficult to identify. However, parameters such as dissolved organic carbon (DOC) limit the amounts of chlorination due to simultaneous disinfection by-product formation. The concept of watershed management has gained much ground over the years as a means to resolve non-point source problems. Under this management scheme stakeholders in a watershed collectively agree to the nature and extent of non-point sources, determine water quality causes using sound scientific approaches, and together develop and implement a corrective plan. However, the ''science'' of watershed management currently has several shortcomings according to a recent National Research Council report. The scientific component of watershed management depends on acquiring knowledge that links water quality sources with geographic regions. However, there is an observational gap in this …

Rheological and physical properties testing were conducted on actual AN-107 and AW-101 pretreated feed samples prior to the addition of glass formers. Analyses were repeated following the addition of glass formers. The AN-107 and AW-101 pretreated feeds were tested at the target sodium values of nominally 6, 8, and 10 M. The AW-101 melter feeds were tested at these same concentrations, while the AN-107 melter feeds were tested at 5, 6, and 8 M with respect to sodium. These data on actual waste are required to validate and qualify results obtained with simulants.

The quest for metallic hydrogen has been going on for over one hundred years. Before hydrogen was first condensed into a liquid in 1898, it was commonly thought that condensed hydrogen would be a metal, like the monatomic alkali metals below hydrogen in the first column of the Periodic Table. Instead, condensed hydrogen turned out to be transparent, like the diatomic insulating halogens in the seventh column of the Periodic Table. Wigner and Huntington predicted in 1935 that solid hydrogen at 0 K would undergo a first-order phase transition from a diatomic to a monatomic crystallographically ordered solid at {approx}25 GPa. This first-order transition would be accompanied by an insulator-metal transition. Though searched for extensively, a first-order transition from an ordered diatomic insulator to a monatomic metal is yet to be observed at pressures up to 120 and 340 GPa using x-ray diffraction and visual inspection, respectively. On the other hand, hydrogen reaches the minimum electrical conductivity of a metal at 140 GPa, 0.6 g/cm{sup 3}, and 3000 K. These conditions were achieved using a shock wave reverberating between two stiff sapphire anvils. The shock wave was generated with a two-stage light-gas gun. This temperature exceeds the calculated melting temperature …

The University of California and California Institute of Technology are currently studying the feasibility of building a 30-m segmented ground based optical telescope called the California Extremely Large Telescope (CELT). The early ideas for this telescope were first described by Nelson and Mast and more recently refined by Nelson. In parallel, concepts for the fabrication of the primary segments were proposed by Mast, Nelson and Sommargren where high risk technologies were identified. One of these was the surface figure metrology needed for fabricating the aspheric mirror segments. This report addresses the advanced interferometry that will be needed to achieve 15nm rms accuracy for mirror segments with aspheric departures as large as 35mm peak-to-valley. For reasons of cost, size, measurement consistency and ease of operation we believe it is desirable to have a single interferometer that can be universally applied to each and every mirror segment. Such an instrument is described in this report.

This is the final report for the LDRD strategic initiative entitled ''Dislocation Dynamic: Simulation of Plastic Flow of bcc Metals'' (tracking code: 00-SI-011). This report is comprised of 6 individual sections. The first is an executive summary of the project and describes the overall project goal, which is to establish an experimentally validated 3D dislocation dynamics simulation. This first section also gives some information of LLNL's multi-scale modeling efforts associated with the plasticity of bcc metals, and the role of this LDRD project in the multiscale modeling program. The last five sections of this report are journal articles that were produced during the course of the FY-2000 efforts.

The possibility of fast ignition of thermo-nuclear fusion is stimulating research interest and activity worldwide. Fast ignition (FI) offers significantly higher gain than conventional spark ignition and the high gain opens the way to an efficient fusion energy producing cycle with laser drivers. The key to FI is the efficient transport of energy from a short pulse laser beam, the igniter, to a small ignition spark in compressed deuterium-tritium fuel. The primary candidate process enabling such energy transfer, is the absorption of laser light and its conversion into a beam of relativistic electrons, which heats the spark. Theory has predicted self-induced magnetic collimation of the electron beam, which could enable efficient transport from the absorption point to the ignition spark. Experiments are required to understand this highly complex process which involves currents in the electron beam, which greatly exceed the Alfven current limit6 (at which the Larmor radius of an electron in the magnetic field associated with by the current is smaller than the radius of the beam). Almost complete current compensation by cold electron return current is therefore required. The oppositely directed hot and cold electron flows initiate strong growth of the Weibel instability, which causes the currents to …

A groundwater quality assessment plan was prepared to investigate the rate and extent of aquifer contamination beneath Waste Management Area T at the Hanford Site in Washington State. This plan is an update of a draft plan issued in January 1999, which guided work performed in fiscal year 2000.

The immobilization of plutonium-containing wastes into stable solid compositions is one of the problems to be solved in the disposal of radioactive wastes. Research efforts on the selection, preparation with the use of the cold crucible induction melter (CCIM) technology, and investigation of materials that are most suitable for immobilizing plutonium-containing wastes of different origin have been carried out at the All-Russian Scientific Research Institute of Inorganic Materials (VNIINM) and the Institute of the Geology of Ore Deposits, Petrography, Mineralogy, and Geochemistry (IGEM), Russian Academy of Sciences within the framework of agreements with Lawrence Livermore National Laboratory (LLNL, USA) regarding material and technical support. This paper presents the data on the synthesis of cerium-, uranium-, and plutonium-containing materials based on borobasalt, pyroxene, and andradite compositions in the muffle furnace and by the CCIM method. Compositions containing up to 15-18 wt% cerium oxide, 8-11 wt% uranium oxide, and 4.6-5.7 wt% plutonium oxide were obtained in laboratory facilities installed in glove boxes. Comparison studies of the materials synthesized in the muffle furnace and CCIM demonstrate the advantages of using the CCIM method. The distribution of components in the materials.

Using in situ optical microscopy and scattering measurements, we have followed the evolution of surface morphology during etching and measured surface etching rates as a function of humidity and undersaturation. From our experiments to date we have developed the following picture of etch pit formation on KDP crystal surfaces. Pit formation is characterized by a nucleation and growth process: the introduction of water creates a condition of undersaturation at the crystal surface. The equilibrium step directions define the orientation of the edges of the pits and the internal surfaces of the pits are low index facets of KDP. For z-cut and type I crystals, the pits are self-similar, indicating their geometry is controlled by equilibrium, not kinetic parameters. For type II crystals, the aspect ratio of the pits can vary dramatically from sample to sample or even within a sample, showing that the kinetics of dissolution can also play a role in determining overall etch pit geometry. The onset of pit formation during exposure to 55% relative humidity (RH) is detectable within a few hours and most of the etching process is complete within 48 hours, but pits continue to grow for a week or longer. At 75% RH, pits …

Recent work in classification indicates that significant improvements in accuracy can be obtained by growing an ensemble of classifiers and having them vote for the most popular class. This paper focuses on ensembles of decision trees that are created with a randomized procedure based on sampling. Randomization can be introduced by using random samples of the training data (as in bagging or arcing) and running a conventional tree-building algorithm, or by randomizing the induction algorithm itself. The objective of this paper is to describe our first experiences with a novel randomized tree induction method that uses a subset of samples at a node to determine the split. Our empirical results show that ensembles generated using this approach yield results that are competitive in accuracy and superior in computational cost.

N/A

N/A

This data package documents the experimentally derived input data on the representative waste glasses LAWABP1 and HLP-31 that will be used for simulations of the immobilized lowactivity waste disposal system with the Subsurface Transport Over Reactive Multiphases (STORM) code. The STORM code will be used to provide the near-field radionuclide release source term for a performance assessment to be issued in March of 2001. Documented in this data package are data related to 1) kinetic rate law parameters for glass dissolution, 2) alkali-H ion exchange rate, 3) chemical reaction network of secondary phases that form in accelerated weathering tests, and 4) thermodynamic equilibrium constants assigned to these secondary phases. The kinetic rate law and Na+-H+ ion exchange rate were determined from single-pass flow-through experiments. Pressurized unsaturated flow and vapor hydration experiments were used for accelerated weathering or aging of the glasses. The majority of the thermodynamic data were extracted from the thermodynamic database package shipped with the geochemical code EQ3/6. However, several secondary reaction products identified from laboratory tests with prototypical LAW glasses were not included in this database, nor are the thermodynamic data available in the open literature. One of these phases, herschelite, was determined to have a potentially …

This report provides information required to be reported annually by the Washington Administrative Code (WAC) 173-303-071 (3)(r)(ii)(F) and (3)(s)(ix) on the treatability studies conducted on the Hanford Site in 2000. These studies were conducted as required by WAC 173-303-071, ?Excluded Categories of Waste,? sections (3)(r) and (s). Unless otherwise noted, the waste samples were provided by and the treatability studies were performed for the U.S. Department of Energy, Richland Operations Office, P.O. Box 550, Richland, Washington 99352. The U.S. Environmental Protection Agency identification number for these studies is WA7890008967.

The United States has signed but not ratified the US/IAEA Safeguards Additional Protocol. If ratified, the Additional Protocol will require the US to report to the IAEA certain nuclear-related exports and imports to the IAEA. This document identifies and assesses the issues associated with the US making those reports. For example, some regulatory changes appear to be necessary. The document also attempts to predict the impact on the DOE Complex by assessing the historical flow of exports and imports that would be reportable if the Additional Protocol were in force.

Lake Franklin D. Roosevelt was created with the completion of the Grand Coulee Dam in 1942. The lake stretches 151 miles up-stream to the International border between the United States and Canada at the 49th parallel. Increased recreational use, subsistence and sport fishing has resulted in intense interest and possible exploitation of the resources within the lake. Previous studies of the lake and its fishery have been limited. Early studies indicate that natural reproduction within the lake and tributaries are not sufficient to support a rainbow trout (Onchoryhnchus mykiss) fishery (Scholz et. al., 1988). These studies indicate that the rainbow trout population may be limited by lack of suitable habitat for spawning and rearing (Scholz et. al., 1988). The initial phase of this project (Phase I, baseline data collection- 1990-91) was directed at the assessment of limiting factors such as quality and quantity of available spawning gravel, identification of passage barriers, and assessment of other limiting factors. Population estimates were conducted using the Seber/LeCren removal/depletion method. After the initial assessment of stream parameters, several streams were selected for habitat/passage improvement projects (Phase II, implementation-1992-96). At the completion of project habitat improvements, the final phase (Phase III, monitoring) began. This phase …

Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the U.S. Department of Energy and its contractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The HSN and the Eastern Washington Regional Network (EWRN) consist of 41 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. For the HSN, there were 477 triggers during the first quarter of fiscal year (FY) 2001 on the data acquisition system. Of these triggers, 176 were earthquakes. Forty-five earthquakes were located in the HSN area; 1 earthquake occurred in the Columbia River Basalt Group, 43 were earthquakes in the pre-basalt sediments, and 1 was earthquakes in the crystalline basement. Geographically, 44 earthquakes occurred in swarm areas, …

A groundwater quality assessment plan was prepared to investigate the rate and extent of aquifer contamination beneath Waste Management Area TX-TY on the Hanford Site in Washington State. This plan is an update of a draft plan issued in February 1999, which guided work performed in fiscal year 2000.

The NO/CO reaction over Rh metal in automobile catalytic converters is critical to the control of emissions of these pollutant molecules. As part of a program to determine the elementary mechanism(s) of this reaction, we have been performing mid- and far-infrared reflection/absorption spectroscopic (IRAS) measurements of the adsorption and co-adsorption and co-adsorption of NO and CO on Rh single crystal surfaces. Of particular interest is the low-frequency range of the IRAS spectra where we hoped to observe features due to metal-N stretching and/or bending vibrational motions. In particular, we hoped to obtain information regarding the site-requirements for the dissociation of the NO molecule on various Rh single crystal surfaces. An important result from our earlier work is that the selectivity of the reaction for the two nitrogen-containing products, N2 and N2O, is a strong function of the Rh surface structure. On the basis of ancillary data, we suggested that the location of adsorbed NO and N-atoms (formed from dissociation of adsorbed NO) on various Rh surfaces could, perhaps account for the selectivity differences.

This report updates a continuing groundwater quality assessment for single-shell tank Waste Management Area S-SX at the Hanford Site. This report covers November 1997 through April 2000. Major new findings include the following: groundwater contamination continues to persist in both the northern half of the Waste Management Area as well as the southern half; evaluation of changes in water table elevations indicates a gradual shift in the direction of groundwater flow from the southeast to a more easterly direction; discrete depth sampling suggests mobile tank waste contaminants are at the very top of the aquifer in downgradient wells along the southeast side of the SX tank farm.

N/A

The US Department of Energy (DOE) Idaho National Engineering and Environmental Laboratory (INEEL) has fully embraced a flexible, computer-based tool to help increase waste management efficiency and integrate multiple operational functions from waste generation through waste disposition while reducing cost. The Integrated Waste Tracking System (IWTS)provides comprehensive information management for containerized waste during generation,storage, treatment, transport, and disposal. The IWTS provides all information necessary for facilities to properly manage and demonstrate regulatory compliance. As a platformindependent, client-server and Web-based inventory and compliance system, the IWTS has proven to be a successful tracking, characterization, compliance, and reporting tool that meets the needs of both operations and management while providing a high level of management flexibility.

The Monitored Geologic Repository (MGR) Waste Package Department of the Civilian Radioactive Waste Management System Management & Operating Contractor (CRWMS M&O) performed calculations to provide input for disposal of spent nuclear fuel (SNF) from the N Reactor, a graphite moderated reactor at the Department of Energy's (DOE) Hanford Site (ref. 1). The N Reactor core was fueled with slightly enriched (0.947 wt% and 0.947 to 1.25 wt% {sup 235}U in Mark IV and Mark IA fuels, respectively) U-metal clad in Zircaloy-2 (Ref. 1, Sec. 3). Both types of N Reactor SNF have been considered for disposal at the proposed Yucca Mountain site. For some WPs, the outer shell and inner shell may breach (Ref. 3) allowing the influx of water. Water in the WP will moderate neutrons, increasing the likelihood of a criticality event within the WP; and the water may, in time, gradually leach the fissile components from the WP, further affecting the neutronics of the system. This study presents calculations of the long-term geochemical behavior of WPs containing two multi-canister overpacks (MCO) with either six baskets of Mark IA or five baskets of Mark IV intact N Reactor SNF rods (Ref. 1, Sec. 4) and two high-level waste …