This report describes a hazard and accident analysis conducted for Site 300 operations to support update of the ''Site 300 B-Division Firing Areas Safety Analysis Report'' (SAR) [LLNL 1997]. A significant change since the previous SAR is the construction and the new Contained Firing Facility (CFF). Therefore, this hazard and accident analysis focused on the hazards associated with bunker operations to ensure that the hazards at CFF are properly characterized in the updated SAR. Hazard tables were created to cover both the CFF and the existing bunkers with ''open air'' firing tables.

Presently the Heavy Ion Fusion Virtual National Laboratory is researching ion sources and injector concepts to understand how to optimize beam brightness over a range of currents (50-2000 mA argon equivalent). One concept initially accelerates millimeter size, milliamp beamlets to 1 MeV before merging them into centimeter size, ampere beams. Computer simulations have shown the final brightness of the merged beams is dominated by the emittance growth of the merging process, as long as the beamlets ion temperature is below a few eV. Thus, a RF multicusp source capable of high current density can produce beams with better brightness compared to ones extracted from a colder source with a large aperture and lower current density. As such, experiments have begun to develop a RF multicusp source capable of delivering one amp of extracted beam current. It is expected that it will require 10 kW of 13 MHz RF power delivered via a quartz shielded, one and half turn, four inch diameter antenna. Important considerations in the development of the source include the dependence of current density and beam ion temperature on consumed RF power and gas pressure. A fast rise time ({approx} 100 ns) for the extracted beam pulse must …

Al 5083 disks of a superplastic forming grade were gas-pressure formed to hemispheres and cones at constant forming pressures with and without back pressure. The forming operation was performed using an in-house designed and built biaxial forming apparatus. The temporal change of dome heights of the hemispheres and cones were measured for the different forming and back pressures applied. The flow stresses and strain rates developed at the top of the dome during the forming step were shown to closely follow the flow stress-strain rate relationship obtained from the strain rate change tests performed at the same temperature using uniaxial tensile samples.

This paper utilizes the Pacific Northwest National Laboratory?s Integrated Assessment modeling tools to draw out concepts that should be considered when examining purpose-grown biomass as a low-emissions energy source and/or as a key technology for addressing climate change. The paper concludes that using biomass as a significant element of our future energy system will be an enormous undertaking that will transform the global energy and agricultural system. Further, large-scale biomass energy requires substantial advances in the basic science of plant design, an integrated approach to basic and applied research, concurrent consideration of ethical and economic issues, effective planning for market transition, and reliable monitoring systems. Biomass energy is a straightforward concept but a complex endeavor necessitating a coordinated, programmatic effort.

Measurements using silicon detectors to characterize theradiation transmitted through the EMU spacesuit and a human phantom havebeen performed using 155 and 250 MeV proton beams at the Loma LindaUniversity Medical Center (LLUMC). The beams simulate radiationencountered in space, where trapped protons having kinetic energies onthe order of 100 MeV are copious. Protons with 100 MeV kinetic energy andabove can penetrate many centimeters of water of other light materials,so that astronauts exposed to such energetic particles will receive dosesto their internal organs. This dose can be enhanced or reduced byshielding - either from the spacesuit or the self-shielding of the body -but minimization of the risk depends on details of the incident particleflux (in particular the energy spectrum) and on the dose responses of thevarious critical organs.

The objective of this calculation is to determine the structural response of the waste package (WP) swinging down from a horizontally suspended height. The WP used for that purpose is the 21-Pressurized Water Reactor (PWR) WP. The scope of this document is limited to reporting the calculation results in terms of stress intensities. This calculation is associated with the WP design and was performed by the Waste Package Design group in accordance with the ''Technical Work Plan for: Waste Package Design Description for LA'' (Ref. 13). AP-3.12Q, ''Calculations'' (Ref. 18) is used to perform the calculation and develop the document. The information provided by the sketches attached to this calculation is that of the potential design of the type of 21-PWR WP design considered in this calculation and provides the potential dimensions and materials for the 21-PWR WP design.

The signals that determine the correct polarity of breast epithelial structures in vivo are not understood. We have shown previously that luminal epithelial cells can be polarized when cultured within a reconstituted basement membrane gel. We reasoned that such cues in vivo may be given by myoepithelial cells. Accordingly, we used an assay where luminal epithelial cells are incorrectly polarized to test this hypothesis. We show that culturing human primary luminal epithelial cells within collagen-I gels leads to formation of structures with no lumina and with reverse polarity as judged by dual stainings for sialomucin, epithelial specific antigen or occludin. No basement membrane is deposited, and {beta}4-integrin staining is negative. Addition of purified human myoepithelial cells isolated from normal glands corrects the inverse polarity, and leads to formation of double-layered acini with central lumina. Among the laminins present in the human breast basement membrane (laminin-1, -5 and -10/11), laminin-1 was unique in its ability to substitute for myoepithelial cells in polarity reversal. Myoepithelial cells were purified also from four different breast cancer sources including a biphasic cell line. Three out of four samples either totally lacked the ability to interact with luminal epithelial cells, or conveyed only correction of polarity …

The radiation environment aboard the space shuttle and the International Space Station includes high-Z and high-energy (HZE) particles that are part of the galactic cosmic radiation (GCR) spectrum. Iron-56 is considered to be one of the most biologically important parts of the GCR spectrum. Tissue-equivalent proportional counters (TEPC) are used as active dosimeters on manned space flights. These TEPC's are further used to determine average quality factor for each space mission. A TEPC simulating a 1 micron diameter sphere of tissue was exposed as part of a particle spectrometer to iron-56 at energies from 200-1000 MeV/nucleon. The response of TEPC in terms of frequency-averaged lineal energy, dose-averaged lineal energy, as well as energy deposited at different impact parameters through detector was determined for six different incident energies of iron-56 in this energy range. Calculations determined that charged particle equilibrium was achieved for each of the six experiments. Energy depositions at different impact parameters were calculated using a radial dose distribution model and the results compared to experimental data.

We report the development of a method for quantitative, in situ nanoindentation in an electron microscope and its application to study the onset of deformation during the nanoindentation of aluminum films. The load-displacement curve developed during in situ nanoindentation shows the characteristic ''staircase'' instability at the onset of plastic deformation. The instability corresponds to the first appearance of dislocations in previously defect-free grains, and occurs at a force near that measured in conventional nanoindentation experiments on similarly oriented Al grains. Plastic deformation proceeds through the formation and propagation of prismatic loops punched into the material, and half-loops that emanate from the sample surface. This new experimental technique permits the direct observation of the microstructural mechanisms that operate at the onset of deformation.

The interaction of high temperature aqueous solutions with mineral surfaces plays a key role in many aspects of fossil, geothermal and nuclear energy production. This is an area of study in which the subsurface geochemical processes that determine brine composition, porosity and permeability changes, reservoir integrity, and fluid flow rates overlap with the industrial processes associated with corrosion of metal parts and deposition of solids in pipes and on heat exchanger surfaces. The sorption of ions on mineral surfaces is also of great interest in both the subsurface and ''above ground'' regimes of power production, playing a key role in subsurface migration of contaminants (nuclear waste disposal, geothermal brine re-injection, etc.) and in plant operations (corrosion mitigation, migration of radioactive metals from reactor core to heat exchanger, etc.). In this paper, results of the solubility and surface chemistry of metal oxides relevant to both regimes are summarized.

The Heavy Neutral Beam Probe (HNBP) developed initially with DOE funding under the Small Business Innovation Research (SBIR) program was installed on the Tokamak de Varennes (TdeV) at the CCFM. This diagnostic was designed to perform fundamental measurements of edge plasma properties. The hardware was capable of measuring electron density and potential profiles with high spatial and temporal resolution. Fluctuation spectra for these parameters were obtained with HNBP for transport studies.

Occupational and environmental exposure to organic ligands, solvents, fuel hydrocarbons, and polychlorinated biphenyls are linked with increased risk of hematologic malignancies. DOE facilities and waste sites in the U.S. are contaminated with mixtures of potentially hazardous chemicals such as metals, organic ligands, solvents, fuel hydrocarbons, polychlorinated biphenyls and radioactive isotopes. A major goal of this project was to establish linkage between chemical/radiation exposure and induction of genomic damage in target populations with the capability to undergo transformation.

The Fixed Abrasive Slicing Technique (FAST) has been developed as an effective wafering technique by combining the advantages of diamond as an abrasive like internal diamond (ID), a reciprocating bladehead as in Multi-Blade Slurry (MBS) and wire slicing as in multiwire slicing (MWS) techniques. During the development stage, it was necessary to develop a slicer, bladepacks and the technique. It was recognized that high pressures were required between the diamond abrasive and the crystal to achieve effective slicing. This was achieved by rocking the workpiece to minimize the contact length. During the present work, the cutting effectiveness was enhanced by increasing the rotary speed of the crystal in the range of 2,500 to 5,000 rpm and the reciprocating rate of the bladehead to about 100 cycles/minute. The combination of high speed rotation of the crystal and FAST slicing have produced more effective slicing by increasing the cutting rate by a factor of 50 to produce multiple wafers wit h low kerf, low surface damage and high accuracy. In addition, this technique is now applicable for soft as well as very hard crystals. Based on these developments, Crystal Systems is currently commercializing FAST for slicing of a wide variety of hard …

None

Hyper-thermal species have been used to produce carbon-based films with mechanical and tribological properties that have greatly expanded the applications of amorphous carbon coatings. Tetragonally bonded amorphous carbon films have properties that approach that of diamond in several ways. The major drawback, namely intrinsic stresses, preventing the production of thick ta-C films has been overcome by heat treating these films, and presently several micrometer-thick films of ta-C are regularly produced. Yet another area where superhard coatings are of great interest is for wear applications at elevated temperatures, namely around 500 degrees C and above. Such temperatures may be environment temperatures, or localized (flash) temperatures resulting for instance from wear. For this applications, doping the ta-C with elements that are covalently bonded to C (such as Si and B) offers a promising alternative. In this article, I will discuss some treatments that have allowed expanding the applications of pure ta-C, and the incorporation of Si and B on ta-C films. Film properties are presented and discussed.

Phase I Final Report. A prototype manual remote synthesis system based on the unit operations approach was designed, constructed, and functionally tested. This general-purpose system was validated by its configuration and initial use for the preparation of the PET radiopharmaceutical [F-18]FLT using [F-18]fluoride ion.

Poor control of steam generator water level of a nuclear power plant may lead to frequent nuclear reactor shutdowns. These shutdowns are more common at low power where the plant exhibits strong non-minimum phase characteristics and flow measurements at low power are unreliable in many instances. There is need to investigate this problem and systematically design a controller for water level regulation. This work is concerned with the study and the design of a suitable controller for a U-Tube Steam Generator (UTSG) of a Pressurized Water Reactor (PWR) which has time varying dynamics. The controller should be suitable for the water level control of UTSG without manual operation from start-up to full load transient condition. Some preliminary simulation results are presented that demonstrate the effectiveness of the proposed controller. The development of the complete control algorithm includes components such as robust output tracking, and adaptively estimating both the system parameters and state variables simultaneously. At the present time all these components are not completed due to time constraints. A robust tracking component of the controller for water level control is developed and its effectiveness on the parameter variations is demonstrated in this study. The results appear encouraging and they are …

This is the final report for the project. The report describes the project results and conclusions. It also lists all technical documents and software artifacts.

In 1992 the U.S. Environmental Protection Agency (EPA) introduced ENERGY STAR (registered trademark) a voluntary labeling program designed to identify and promote energy-efficient products, in order to reduce carbon dioxide emissions. Since then, the EPA, now in partnership with the U.S. Department of Energy (DOE), has expanded the program to cover nearly the entire buildings sector, spanning new homes, commercial buildings, residential heating and cooling equipment, major appliances, office equipment, commercial and residential lighting, and home electronics. This paper is based on our experience since 1993 in providing technical support to the ENERGY STAR program. We provide a snapshot of the ENERGY STAR program in the year 2000, including a general overview of the program, its accomplishments, and the possibilities for future development.

IGAC provides an international framework for the planning, coordination, and execution of atmospheric--biospheric research with emphasis on projects which require resources beyond the capabilities of any single nation. The development of chemical emission inventories by IGAC scientists, the development and intercomparison under IGAC leadership of existing chemical transport models, the analysis of data gathered during IGAC-sponsored field campaigns, etc., has provided new scientific information essential to the development of the discipline.

The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

If a contact interaction type correction to a Standard Model process is observed, studying its detailed properties can provide information on the fundamental physics responsible for it. Assuming that such a correction has been observed in lepton pair production at a 500 GeV-1 TeV linear collider, we consider a few possible models that could explain it, such as theories with large and TeV-scale extra dimensions and models with lepton compositeness. We show that using the measured cross-sections and angular distributions, these models can be distinguished with a high degree of confidence.

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding …

Optical parametric chirped pulse amplification (OPCPA) is a scalable technology, for ultrashort pulse amplification. Its major advantages include design simplicity, broad bandwidth, tunability, low B-integral, high contrast, and high beam quality. OPCPA is suitable both for scaling to high peak power as well as high average power. We describe the amplification of stretched 100 fs oscillator pulses in a three-stage OPCPA system pumped by a commercial, single-longitudinal-mode, Q-switched Nd:YAG laser. The stretched pulses were centered around 1054 nm with a FWHM bandwidth of 16.5 nm and had an energy of 0.5 nJ. Using our OPCPA system, we obtained an amplified pulse energy of up to 31 mJ at a 10 Hz repetition rate. The overall conversion efficiency from pump to signal is 6%, which is the highest efficiency obtained With a commercial tabletop pump laser to date. The overall conversion efficiency is limited due to the finite temporal overlap of the seed (3 ns) with respect to the duration of the pump (8.5 ns). Within the temporal window of the seed pulse the pump to signal conversion efficiency exceeds 20%. Recompression of the amplified signal was demonstrated to 310 fs, limited by the aberrations initially present in the low energy …