A new cryostat cooled by a closed-cycle Cryomech GB-37 cryocooler for superconductor measurements at temperatures down to 20 K is described. The sample is conductively coupled to the cold stage so as to minimize vibration and thermal stresses. AC losses have been measured calorimetrically in several HTSC coils that have been wound to simulate sub-scale transformer winding pairs. Stable temperatures down to 20 K were reached on these coils, allowing measurements at practical levels of ac current and I{sub c}. By using short ac current pulses, losses on individual turns could be resolved. Results are reported mainly to showcase the apparatus, measurement procedure and analytical approach.

When Fluor Fernald took over the management of the Fernald Environmental Management Project in 1992, the estimated closure date of the site was more than 25 years into the future. Fluor Fernald, in conjunction with DOE-Fernald, introduced the Accelerated Cleanup Plan, which was designed to substantially shorten that schedule and save taxpayers more than $3 billion. The management of Fluor Fernald believes there are three fundamental concerns that must be addressed by any contractor hoping to achieve closure of a site within the DOE complex. They are relationship management, resource management and contract management. Relationship management refers to the interaction between the site and local residents, regulators, union leadership, the workforce at large, the media, and any other interested stakeholder groups. Resource management is of course related to the effective administration of the site knowledge base and the skills of the workforce, the attraction and retention of qualified a nd competent technical personnel, and the best recognition and use of appropriate new technologies. Perhaps most importantly, resource management must also include a plan for survival in a flat-funding environment. Lastly, creative and disciplined contract management will be essential to effecting the closure of any DOE site. Fluor Fernald, together with …

This paper addresses the design of a system intended to readout multiparametric information from a matrix of pixels. The system presented here acquires the charge associated with the signal and provides a timing information from each pixel. Although it lends itself to a broad range of time-correlated imaging situations involving any kind of pixel matrices, the design constraints assumed here are particularly tailored to the application with pixels that sense the output charge distribution from a Micro Channel Plate (MCP). The combination of a microchannel plate and a pixel matrix is an extremely versatile detector and the readout system must be able to fully exploit the intrinsically high position resolution and time accuracy featured by the MCP. The behavior of the readout system described in this paper is based upon advanced concepts to meet the above application requirements and is believed to provide a significant functional improvement over the conventional pixel systems.

An adaptive path planning algorithm is presented for cooperating Unmanned Air Vehicles (UAVs) that are used to deploy and operate land-based sensor networks. The algorithm employs a global cost function to generate paths for the UAVs, and adapts the paths to exceptions that might occur. Examples are provided of the paths and adaptation.

This paper gives estimates of the externalities associated with the increased likelihood of health and environmental impacts that result from exposure to pollutants emitted by electric power plants in South Carolina. A new method for estimating externalities is developed, results are presented, and policy-related implications are discussed. The results suggest that the environmental externalities are noteworthy and would affect electricity consumption if they are internalized and passed on to consumers in the rates they are charged. Yet, if the externalities are internalized, they are not so great that they would dramatically alter the fuel mix in the state in the immediate future. Two policy options are discussed: incentives or disincentives for new merchant power plants and emissions permit trading.

The authors examine the task of pixel-by-pixel classification of the multispectral and grayscale images typically found in remote-sensing and medical applications. Simple machine learning techniques have long been applied to remote-sensed image classification, but almost always using purely spectral information about each pixel. Humans can often outperform these systems, and make extensive use of spatial context to make classification decisions. They present AFREET: an SVM-based learning system which attempts to automatically construct and refine spatio-spectral features in a somewhat human-inspired fashion. Comparisons with traditionally used machine learning techniques show that AFREET achieves significantly higher performance. The use of spatial context is particularly useful for medical imagery, where multispectral images are still rare.

Laboratory data are presented on the effect of constant-temperature aging on the apparent thermal conductivity of polyurethane foam insulation for refrigerators and freezers. The foam specimens were blown with HCFC-141b and with three of its potential replacements--HFC-134a, HFC-245fa, and cyclopentane. Specimens were aged at constant temperatures of 90 F, 40 F, and {minus}10 F. Thermal conductivity measurements were made on two types of specimens: full-thickness simulated refrigerator panels containing foam enclosed between solid plastic sheets, and thin slices of core foam cut from similar panels. Results are presented for the first two years of a multi-year aging study. Preliminary comparisons of measured data with predictions of a mathematical aging model are presented.

Two optimum defocus conditions are used in high-resolution transmission electron microscopy. Scherzer defocus produces an image of the specimen ''projected potential'' to the resolution of the microscope, and Lichte defocus minimizes dispersion. A third optimum defocus is best for focal-series reconstruction; alpha-null defocus maximizes transfer of high-frequency diffracted beam amplitudes into the microscope image. Beam transfer is confined by incident-beam convergence to a Gaussian ''packet'' of defocus values centered on the alpha-null defocus. For a diffracted beam hkl, with a spatial frequency of u, the envelope for incident beam convergence has null damping effect when defocus is set to -Cs. (wavelength.u)**2. On either side of this alpha-null defocus value, the damping effect of incident-beam convergence reduces diffracted-beam transfer. The position of alpha-null defocus for any spatial frequency depends only on the value of Cs, but defocus-packet width around the alpha-null defocus depends only on the convergence semi-angle. Under NCEM OAM (one-Angstrom microscope) conditions, a [110] diamond image with the correct 0.89A spacing appears when the Si (004) alpha-null defocus is selected. The alpha-null defocus should be included as the (furthest underfocus) limit for all high-resolution focal series reconstruction.

In December 2000, a performance monitoring facility was constructed adjacent to the U-3ax/bl mixed waste disposal unit at the Nevada Test Site (NTS). Recent studies conducted in the arid southwestern United States suggest that a vegetated monolayer evapotranspiration (ET) closure cover may be more effective at isolating waste than traditional Resource Conservation and Recovery Act (RCRA) multi-layered designs. The monitoring system deployed next to the U-3ax/bl disposal unit consists of eight drainage lysimeters with three surface treatments: two are left bare; two are revegetated with native species; two are being allowed to revegetate with invader species; and two are reserved for future studies. Soil used in each lysimeter is native alluvium taken from the same location as the soil used for the cover material on U-3ax/bl. The lysimeters were constructed so that any drainage to the bottom can be collected and measured. To provide a detailed evaluation of the cover performance, an ar ray of 16 sensors was installed in each lysimeter to measure soil water content, soil water potential, and soil temperature. Revegetation of the U-3ax/bl closure cover establishes a stable plant community that maximizes water loss through transpiration while at the same time, reduces water and wind erosion …

A high-temperature (300 C), high-pressure (18 MPa), and high-leak rate (1500 L/min) facility, and a room temperature, high-pressure (52 MPa) test facility were used to test flawed steam generator tubes. Single and multiple rectangular flaws were fabricated by electro-discharge machining on the outside surface of the tubes. This paper briefly reviews analytical methods for predicting ligament rupture and unstable burst of tubes with single and multiple rectangular flaws. Test data are presented to validate the failure models. The ligament rupture pressure of specimens with multiple flaws predicted by an equivalent rectangular crack method agree fairly well with measured data.

None

Even with the continual advances made in both computational algorithms and computer hardware used in reservoir modeling studies, large-scale simulation of fluid and heat flow in heterogeneous reservoirs remains a challenge. The problem commonly arises from intensive computational requirement for detailed modeling investigations of real-world reservoirs. This paper presents the application of a massive parallel-computing version of the TOUGH2 code developed for performing large-scale field simulations. As an application example, the parallelized TOUGH2 code is applied to develop a three-dimensional unsaturated-zone numerical model simulating flow of moisture, gas, and heat in the unsaturated zone of Yucca Mountain, Nevada, a potential repository for high-level radioactive waste. The modeling approach employs refined spatial discretization to represent the heterogeneous fractured tuffs of the system, using more than a million 3-D gridblocks. The problem of two-phase flow and heat transfer within the model domain leads to a total of 3,226,566 linear equations to be solved per Newton iteration. The simulation is conducted on a Cray T3E-900, a distributed-memory massively parallel computer. Simulation results indicate that the parallel computing technique, as implemented in the TOUGH2 code, is very efficient. The reliability and accuracy of the model results have been demonstrated by comparing them to those …

In this paper, we describe AQSim, an ongoing effort to design and implement a system to manage terabytes of scientific simulation data. The goal of this project is to reduce data storage requirements and access times while permitting ad-hoc queries using statistical and mathematical models of the data. In order to facilitate data exchange between models based on different representations, we are evaluating using the ASCI common data model which is comprised of several layers of increasing semantic complexity. To support queries over the spatial-temporal mesh structured data we are in the process of defining and implementing a grammar for MeshSQL.

This paper provides a review and synthesis of current knowledge about the associations of ventilation system types in office buildings with sick building syndrome symptoms and discusses potential explanations for the associations. Relative to natural ventilation, air conditioning, with or without humidification, was consistently associated with a statistically significant increase in the prevalence of one or more SBS symptoms. Prevalences were typically higher by approximately 30% to 200% in the air conditioned buildings. In two of three assessments from a single study, symptom prevalences were also significantly higher in air conditioned buildings than in buildings with simple mechanical ventilation and no humidification. In approximately half of assessments, SBS symptom prevalences were significantly higher in buildings with simple mechanical ventilation than in buildings with natural ventilation. Insufficient information was available for conclusions about the potential increased risk of SBS symptoms with humidification. The statistically significant associations of mechanical ventilation and air conditioning with SBS symptoms are much more frequent than expected from chance and also not likely to be a consequence of confounding by several potential personal, job, or building related confounders. The reasons for the increases in symptom prevalences with mechanical ventilation and particularly with air conditioning remain unclear. Multiple …

The Arctic Military Environmental Cooperation (AMEC) Program is a cooperative effort between the military establishments of the Kingdom of Norway, the Russian Federation, and the US. This paper discusses joint activities conducted over the past year among Norwegian, Russian, and US technical experts on a project to develop, demonstrate and implement automated radiological monitoring at Russian Navy facilities engaged in the dismantlement of nuclear-powered strategic ballistic missile launching submarines. Radiological monitoring is needed at these facilities to help protect workers engaged in the dismantlement program and the public living within the footprint of routine and accidental radiation exposure areas. By providing remote stand-alone monitoring, the Russian Navy will achieve added protection due to the defense-in-depth strategy afforded by local (at the site), regional (Kola) and national-level (Moscow) oversight. The system being implemented at the Polyaminsky Russian Naval Shipyard was developed from a working model tested at the Russian Institute for Nuclear Safety, Moscow, Russia. It includes Russian manufactured terrestrial and underwater gamma detectors, smart controllers for graded sampling, radio-modems for offsite transmission of the data, and a data fusion/display system: The data fusion/display system is derived from the Norwegian Picasso AMEC Environmental Monitoring software package. This computer package allows monitoring …

The Arctic Military Environmental Cooperation (AMEC) Program is a cooperative effort between the military establishments of the Kingdom of Norway, the Russian Federation, and the US. This paper discusses joint activities conducted over the past year among Norwegian, Russian, and US technical experts on a project to develop, demonstrate and implement automated radiological monitoring at Russian Navy facilities engaged in the dismantlement of nuclear-powered strategic ballistic missile launching submarines. Radiological monitoring is needed at these facilities to help protect workers engaged in the dismantlement program and the public living within the footprint of routine and accidental radiation exposure areas. By providing remote stand-alone monitoring, the Russian Navy will achieve added protection due to the defense-in-depth strategy afforded by local (at the site), regional (Kola) and national-level (Moscow) oversight. The system being implemented at the Polyaminsky Russian Naval Shipyard was developed from a working model tested at the Russian Institute for Nuclear Safety, Moscow, Russia. It includes Russian manufactured terrestrial and underwater gamma detectors, smart controllers for graded sampling, radio-modems for offsite transmission of the data, and a data fusion/display system: The data fusion/display system is derived from the Norwegian Picasso AMEC Environmental Monitoring software package. This computer package allows monitoring …

We utilize monthly {sup 14}C data derived from coral archives in conjunction with ocean circulation models to address two questions: (1) how does the shallow circulation of the tropical Pacific vary on seasonal to decadal time scales and (2) which dynamic processes determine the mean vertical structure of the equatorial Pacific thermocline. Our results directly impact the understanding of global climate events such as the El Nino-Southern Oscillation (ENSO). To study changes in ocean circulation and water mass distribution involved in the genesis and evolution of ENSO and decadal climate variability, it is necessary to have records of climate variables several decades in length. Continuous instrumental records are limited because technology for continuous monitoring of ocean currents has only recently been available, and ships of opportunity archives such as COADS contain large spatial and temporal biases. In addition, temperature and salinity in surface waters are not conservative and thus can not be independently relied upon to trace water masses, reducing the utility of historical observations. Radiocarbon ({sup 14}C) in sea water is a quasi-conservative water mass tracer and is incorporated into coral skeletal material, thus coral {sup 14}C records can be used to reconstruct changes in shallow circulation that would …

We utilize monthly {sup 14}C data derived from coral archives in conjunction with ocean circulation models to address two questions: (1) how does the shallow circulation of the tropical Pacific vary on seasonal to decadal time scales and (2) which dynamic processes determine the mean vertical structure of the equatorial Pacific thermocline. Our results directly impact the understanding of global climate events such as the El Nino-Southern Oscillation (ENSO). To study changes in ocean circulation and water mass distribution involved in the genesis and evolution of ENSO and decadal climate variability, it is necessary to have records of climate variables several decades in length. Continuous instrumental records are limited because technology for continuous monitoring of ocean currents has only recently been available, and ships of opportunity archives such as COADS contain large spatial and temporal biases. In addition, temperature and salinity in surface waters are not conservative and thus can not be independently relied upon to trace water masses, reducing the utility of historical observations. Radiocarbon ({sup 14}C) in sea water is a quasi-conservative water mass tracer and is incorporated into coral skeletal material, thus coral {sup 14}C records can be used to reconstruct changes in shallow circulation that would …

This paper is extracted from a full-length technical report that presents a detailed analysis of the differences in thermal performance between the SIP and frame units and describes the validation of the STEM method.

The Yaquina Bay Bridge in Newport, Oregon, was designed by Conde B. McCullough and built in 1936. The 3,223-foot (982 m) structure is a combination of concrete arch approach spans and a steel through arch over the shipping channel. Cathodic protection is used to prevent corrosion damage to the concrete arches. The Oregon Department of Transportation (Oregon DOT) installed a carbon anode coating (DAC-85) on two of the north approach spans in 1985. This anode was operated at a current density of 6.6 mA/m2(0.6 mA/ft2). No failure of the conductive anode was observed in 1990, five years after application, or in 2000, 15 years after application. Thermal-sprayed zinc anodes 20 mils (0.5 mm) thick were applied to half the south approach spans beginning in 1990. Thermal-sprayed zinc anodes 15 mils (0.4 mm) thick were applied to the remaining spans in 1996. These anodes were operated at a current density of 2.2 mA/m2(0.2 mA/ft2). In 1999, four zones on the approach spans were included in a two-year field trial of humectants to improve zinc anode performance. The humectants LiNO3 and LiBr were applied to two zones; the two adjacent zones were left untreated as controls. The humectants substantially reduced circuit resistance …

Low energy charge transfer is an important process in plasmas where multicharged ions and neutral atoms or molecules can exist at eV/amu energies and below. At eV/amu collision energies there are no scaling laws to characterize the charge transfer cross section and both theory and experiment are difficult. The capabilities of current experimental techniques used to measure low energy total and state-selective cross sections are discussed.

None

Parallel jobs are different from sequential jobs and require a different type of process management. We present here a process management system for parallel programs such as those written using MPI. A primary goal of the system, which we call MPD (for multipurpose daemon), is to be scalable. By this we mean that startup of interactive parallel jobs comprising thousands of processes is quick, that signals can be quickly delivered to processes, and that stdin, stdout, and stderr are managed intuitively. Our primary target is parallel machines made up of clusters of SMPs, but the system is also useful in more tightly integrated environments. We describe how MPD enables much faster startup and better runtime management of parallel jobs. We show how close control of stdio can support the easy implementation of a number of convenient system utilities, even a parallel debugger. We describe a simple but general interface that can be used to separate any process manager from a parallel library, which we use to keep MPD separate from MPICH.

The Reich-Moore formulation is used extensively in many isotope/nuclide evaluations to represent neutron cross section data for the resolved-resonance region. The Reich-Moore equations require the evaluation of complex matrices (i.e., matrices with complex quantities) that are a function of the resonance energy and corresponding resonance parameters. Although the Reich-Moore equations are documented in the open literature, computational pitfalls may be encountered with the implementation of the Reich-Moore equations in a cross-section processing code. Based on experience, numerical instabilities in the form of nonphysical oscillations can occur in the calculated absorption, capture or elastic scattering cross sections. To illustrate possible numerical instabilities, the conventional Reich-Moore equations are presented, and the conditions that lead to numerical problems in the cross-section calculations are identified and demonstrated for {sup 28}Si and {sup 60}Ni. In an effort to circumvent the computational problems, detailed or revised Reich-Moore expressions have been developed to efficiently and accurately calculate cross sections for neutron-induced reactions in the resolved-resonance region. The revised equations can be used to avoid numerical problems associated with the implementation of the Reich-Moore formulation in a cross-section processing code. The revised Reich-Moore equations are also used to demonstrate the improved cross-section results (i.e., without numerical instabilities) for …