The advent of 3rd generation light sources such as the Advanced Light Source (ALS) at LBL, and the Advanced Photon Source at Argonne, have produced a revolution in x-ray probing of dense matter during the past decade. These machines use electron-synchrotrons in conjunction with undulator stages to produce 100 psec x-ray pulses with photon energies of several kiloelectronvolts (keV). The applications for x-ray probing of matter are numerous and diverse with experiments in medicine and biology, semiconductors and materials science, and plasma and solid state physics. In spite of the success of the 3rd generation light sources there is strong motivation to push the capabilities of x-ray probing into new realms, requiring shorter pulses, higher brightness and harder x-rays. A 4th generation light source, the Linac Coherent Light Source (LCLS), is being considered at the Stanford Linear Accelerator [1]. The LCLS will produce multi-kilovolt x-rays of subpicosecond duration that are 10 orders of magnitude brighter than today's 3rd generation light sources.[1] Although the LCLS will provide unprecedented capability for performing time-resolved x-ray probing of ultrafast phenomena at solid densities, this machine will not be completed for many years. In the meantime there is a serious need for an ultrashort-pulse, high-brightness, …

Recent LLNL experiments reported elsewhere at this conference explored the pulselength dependence of 351 nm bulk damage incidence in DKDP. The results found are consistent, in part, with a model in which a distribution of small bulk initiators is assumed to exist in the crystal and the damage threshold is determined by reaching a critical temperature. The observed pulse length dependence can be explained as being set by the most probable defect capable of causing damage at a given pulselength. Analysis of obscuration in side illuminated images of the damaged region yields estimates of the damage site distributions that are in reasonable agreement with the distributions experimentally directly estimated.

Quantification of specific proteins depends on separation by chromatography or electrophoresis followed by chemical detection schemes such as staining and fluorophore adhesion. Chemical exchange of short-lived isotopes, particularly sulfur, is also prevalent despite the inconveniences of counting radioactivity. Physical methods based on isotopic and elemental analyses offer highly sensitive protein quantitation that has linear response over wide dynamic ranges and is independent of protein conformation. Accelerator mass spectrometry quantifies long-lived isotopes such as 14C to sub-attomole sensitivity. We quantified protein interactions with small molecules such as toxins, vitamins, and natural biochemicals at precisions of 1-5% . Micro-proton-induced-xray-emission quantifies elemental abundances in separated metalloprotein samples to nanogram amounts and is capable of quantifying phosphorylated loci in gels. Accelerator-based quantitation is a possible tool for quantifying the genome translation into proteome.

Mapping inter-cell signaling pathways requires an integrated view of experimental and informatic protocols. BioSig provides the foundation of cataloging inter-cell responses as a function of particular conditioning, treatment, staining, etc. for either in vivo or in vitro experiments. This paper outlines the system architecture, a functional data model for representing experimental protocols, algorithms for image analysis, and the required statistical analysis. The architecture provides remote shared operation of an inverted optical microscope, and couples instrument operation with images acquisition and annotation. The information is stored in an object-oriented database. The algorithms extract structural information such as morphology and organization, and map it to functional information such as inter-cellular responses. An example of usage of this system is included.

Chemical analysis of groundwater samples is the baseline method of characterizing and monitoring groundwater contamination in the vadose (unsaturated) zone at most waste sites. Contamination moving from the surface to the water table passes through an unsaturated zone that can range in thickness from a few inches to hundreds of feet at a give site. Lysimeters are samplers that are designed to apply suction to the subsurface and are typically used to collect groundwater in the unsaturated zone.

Progress in the study of plasma physics and controlled fusion has been profoundly influenced by dramatic increases in computing capability. Computational plasma physics has become an equal partner with experiment and traditional theory. This presentation illustrates some of the progress in computer modeling of plasma physics and controlled fusion.

Data and calculations from previous criticality safety evaluations and analyses were used to evaluate criticality safety for the entire Tank Farms facility to support the continued waste storage mission. This criticality safety evaluation concludes that a criticality accident at the Tank Farms facility is an incredible event due to the existing form (chemistry) and distribution (neutron absorbers) of tank waste. Limits and controls for receipt of waste from other facilities and maintenance of tank waste condition are set forth to maintain the margin subcriticality in tank waste.

With the promising new results of fast z-pinch technology developed at Sandia National Laboratories, we are investigating using z-pinch driven high-yield Inertial Confinement Fusion (ICF) as a fusion power plant energy source. These investigations have led to a novel fusion system concept based on an attempt to separate many of the difficult fusion engineering issues and a strict reliance on existing technology, or a reasonable extrapolation of existing technology, wherever possible. In this paper, we describe the main components of such a system with a focus on the fusion chamber dynamics. The concept works with all of the electrically-coupled ICF proposed fusion designs. It is proposed that a z-pinch driven ICF power system can be feasibly operated at high yields (1 to 30 GJ) with a relatively low pulse rate (0.01-0.1 Hz). To deliver the required current from the rep-rated pulse power driver to the z-pinch diode, a Recyclable Transmission Line (RTL) and the integrated target hardware are fabricated, vacuum pumped, and aligned prior to loading for each power pulse. In this z-pinch driven system, no laser or ion beams propagate in the chamber such that the portion of the chamber outside the RTL does not need to be under …

The oxidation of dimethyl ether (DME) is studied in low-pressure flames using new molecular beam mass spectrometer and laser diagnostics. Two 30.0-Torr, premixed DME/oxygen/argon flames are investigated with stoichiometries of 0.98 and 1.20. The height above burner profiles of nine stable species and two radicals are measured. These results are compared to the detailed chemical reaction mechanism of Curran and coworkers. Generally good agreement is found between the model and data. The largest discrepancies are found for the methyl radical profiles where the model predicts qualitatively different trends in the methyl concentration with stoichiometry than observed in the experiment.

In laboratory cooks pure oxygen was profiled into the circulation line of a batch digester during two periods of the cooking cycle: The first injection occurred during the heating steps for the purpose of in-situ generation of polysulfide. This chip treatment was studied to explore stabilization against alkaline induced carbohydrate peeling and to increase pulp yield. Under optimum conditions small amounts of polysulfide were produced with yield increase of about 0.5% These increases fell below earlier reports suggesting that unknown differences in liquor composition may influence the relative amounts of polysulfide and thiosulfate generated during the oxidation. Consequently, further studies are required to understand the factors that influence the ratios of those two sulfur species.

We describe aspects of particle creation in strong fields using a quantum kinetic equation with a relaxation-time approximation to the collision term. The strong electric background field is determined by solving Maxwell's equation in tandem with the Vlasov equation. Plasma oscillations appear as a result of feedback between the background field and the field generated by the particles produced. The plasma frequency depends on the strength of the initial background fields and the collision frequency, and is sensitive to the necessary momentum-dependence of dressed-parton masses.

Completion of cased and cemented wells by shaped charge perforation causes its own damage to the formation, potentially reducing well productivity. In practice it is found that underbalance conditions clean up the damaged zone to some extent, however, the mechanisms of these processes are poorly understood. Most hydrocodes typically used to simulate rock response to shaped charge penetration do not provide permeability estimates. Furthermore, the time scales for formation clean up are potentially much longer than the period of jet penetration. We have developed a simple, yet accurate model for the evolution of porosity and permeability which can easily be incorporated into existing hydrocodes using information from the history of each cell. In addition, we have developed a code that efficiently simulates fines migration during the post-shot surge period using initial conditions taken directly from hydrocode simulations of jet penetration. Results from a one-dimensional model simulation are in excellent agreement with measured permeability distributions. We also present two-dimensional numerical results which qualitatively reproduce experimentally obtained permeability maps for different values of underbalance. Although initial results have been promising, further comparison with experiment is essential to tune the coupling between the hydrocode and fines migration simulator. Currently the permeability model is …

The SNRB{trademark} test program demonstrated the feasibility of controlling multiple emissions from a coal-fired boiler in a single processing unit. The degree of emissions removals for SO{sub 2}, NO{sub x}, and particulates all exceeded the project goals. A high degree of removal for HAPs was also achieved. The SNRB system offers low space requirements, control of multiple pollutants, and operating flexibility. The pneumatic SO{sub 2} sorbent and ammonia injection systems are expected to have high reliability because of their mechanical simplicity. Despite these advantages, the SNRB process may not be an economic choice for applications involving SO{sub 2} removals above about 85%. For lower levels of SO{sub 2} removal, the projected economics for SNRB appear to be more favorable than those of existing processes which involve separate units for the same degree of control for SO{sub 2}, NO{sub x} , and particulates. Specific findings are summarized as follows: (1) SO{sub 2} removal of 85-90% was achieved at a calcium utilization of 40-45%, representing a significant improvement in performance over other dry lime injection processes. (2) When firing 3-4% sulfur coal, compliance with the 1990 CAAA Phase I SO{sub 2} emissions limit of 2.5 lb/10{sup 6} Btu was achieved with a …

The intra- and interchain structure of sodium poly(styrenesulphonate) when free and when confined in contrast matched porous Vycor has been investigated by SANS. When confined, a peak is observed whose intensity increases with molecular weight and the 1/q scattering region is extended compared to the bulk. We infer that the chains are sufficiently extended, under the influence of confinement, to highlight the large scale disordered structure of Vycor. The asymptotic behavior of the observed interchain structure factor is = 1/q{sup 2} and = 1/q for free and confined chains respectively.

The objective of this project was to develop thermophilic cultures capable of expressing the desulfurization (dsz) operon of Rhodococcus sp. IGTS8. The approaches taken in this project included the development of plasmid and integrative expression vectors that function well in Thermus thermophilus, the cloning of Rhodococcus dsz genes in Thermus expression vectors, and the isolation of bacterial cultures that express the dsz operon at thermophilic temperatures. This project has resulted in the development of plasmid and integrative expression vectors for use in T. thermophilus. The dsz genes have been expressed at moderately thermophilic temperatures (52 C) in Mycobacterium phlei and at temperatures as high as 72 C in T. thermophilus. The tools and methods developed in this project will be generally useful for the expression of heterologous genes in Thermus. Key developments in the project have been the isolation of a Mycobacterium phlei culture capable of expressing the desulfurization operon at 52 C, development of plasmid and integrative expression vectors for Thermus thermophilus, and the development of a host-vector system based on the malate dehydrogenase gene that allows plasmids to be stably maintained in T. thermophilus and provides a convenient reporter gene for the accurate quantification of gene expression. Publications …

None

None

This guidebook will be distributed to 200 geologists for the Carolina Geological Society Meeting and the onsite field trip in November.

This guidebook will be distributed to 200 geologists for the Carolina Geological Society Meeting and the onsite field trip in November.

It is shown in this paper for the first time, that the chirping Alfven instabilities observed mostly during ion cyclotron range of frequency (ICRF) heating have been positively identified as Energetic Particle Modes (EPM). This has been possible because of the detailed measurement of the q-profile with the MSE (motional Stark effect) diagnostic in DIII-D. The EPMs are shown to be the leading cause of the monster sawtooth crash. It is also shown that TAEs are excited either directly or indirectly by the EPMs and they cause fast ion losses. A scenario for the stabilization and the crash of the monster sawtooth and for the degradation of the ICRF heating efficiency at high power is presented.

Operating in a potentially hostile city is every soldier's nightmare. The staggering complexity of the urban environment means that deadly threats--or non-combatants-may lurk behind every corner, doorway, or window. Urban operations present an almost unparalleled challenge to the modern professional military. The complexity of urban operations is further amplified by the diversity of missions that the military will be called upon to conduct in urban terrain. Peace-making and peace-keeping missions, urban raids to seize airports or WMD sites or to rescue hostages, and extended urban combat operations all present different sorts of challenges for planners and troops on the ground. Technology almost never serves as a magic bullet, and past predictions of technological miracles pile high on the ash heap of history. At the same time, it is a vital element of planning in the modern age to consider and, if possible, take advantage of emerging technologies. We believe that technologies can assist military operations in urbanized terrain (MOUT) in three primary areas, which are discussed.

None

While Bi-2223 tapes have been the workhorses of the superconductor industry, their poor performance in applied magnetic fields restrict their use to below 30 K. Melt-processing of Ag-clad Yb-123 PIT tapes offers a simple and scalable technique for fabricating long-length HTS conductors capable of being used at 77 K. Under reduced oxygen partial pressure, the peritectic temperature of Yb-123 is below the melting point of Ag, and this facilitates the adaptation of melt-texturing methods for fabricating these tapes. The effect of melt-processing temperature on current density was also explored; a temperature of 965 C yielded optimal critical current values. The critical current density achieved at 4.2 K was 20,000 A/cm{sup 2}, corresponding to a critical current of 52 A. Based on the above results, an optimal processing zone for melt-processing of Ag-clad Yb-123 tapes was determined. These results hold promise for melt-processing of Ag-clad Yb-123 tapes as an alternative to Bi-2223 PIT technology.

The issues of linear stability of low frequency perturbative and nonperturbative modes in advanced tokamak regimes are addressed based on recent developments in theory, computational methods, and progress in experiments. Perturbative codes NOVA and ORBIT are used to calculate the effects of TAEs on fast particle population in spherical tokamak NSTX. Nonperturbative analysis of chirping frequency modes in experiments on TFTR and JT-60U is presented using the kinetic code HINST, which identified such modes as a separate branch of Alfven modes - resonance TAE (R-TAE). Internal kink mode stability in the presence of fast particles is studied using the NOVA code and hybrid kinetic-MHD nonlinear code M3D.