Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Semiweekly newspaper from Boerne, Texas that includes local, state, and national news along with advertising.

Weekly newspaper from Brady, Texas that includes local, state, and national news along with advertising.

Thesis written by a student in the UNT Honors College discussing the support and involvement of banks in Community Economic Development.

The impressive performance improvements of laterally oxidized VCSELs come at the expense of increased fabrication complexity for 2-dimensional arrays. Since the epitaxial layers to be wet-thermally oxidized must be exposed, non-planarity can be an issue. This is particularly important in that electrical contact to both the anode and cathode of the diode must be brought out to a package. They have investigated four fabrication sequences suitable for the fabrication of 2-dimensional VCSEL arrays. These techniques include: mesa etched polymer planarized, mesa etched bridge contacted, mesa etched oxide isolated (where the electrical trace is isolated from the substrate during the oxidation) and oxide/implant isolation (oxidation through small via holes) all of which result in VCSELs with outstanding performance. The suitability of these processes for manufacturing are assessed relative to oxidation uniformity, device capacitance, and structural ruggedness for packaging.

This report documents the results of the ORNL investigation into prime movers that would be desirable for the construction of a power system suitable for the United States Marine Corps (USMC) expeditionary forces under Operational Maneuvers From The Sea (OMFTS) doctrine. Discrete power levels of {approx}1, 5, 15, and 30 kW are considered. The only requirement is that the prime mover consumes diesel fuel. A brief description is given for the prime movers to describe their basic scientific foundations and relative advantages and disadvantages. A list of key attributes developed by ORNL has been weighted by the USMC to indicate the level of importance. A total of 14 different prime movers were scored by ORNL personnel in four size ranges (1,5, 15, & 30 kW) for their relative strength in each attribute area. The resulting weighted analysis was used to indicate which prime movers are likely to be suitable for USMC needs. No single engine or prime mover emerged as the clear-cut favorite but several engines scored as well or better than the diesel engine. At the higher load levels (15 & 30 kW), the results indicate that the open Brayton (gas turbine) is a relatively mature technology and likely …

Glovebox HA-20MB is located in Room 235B of the 234-5Z Building at the Plutonium Finishing Plant. This enclosure contains mixers, mixer bowls, a crusher unit, an isolated inoperable conveyor unit, plutonium residue feed cans, cemented cans, and a feedwater container. Plutonium residue, not conducive to other forms of stabilization, is prepared for storage and ultimate disposal by cementation. The feed residue material cans can have plutonium contents of only a few grams or up to 200 grams. This evaluation accommodates this wide range of container fissile concentrations.

The data set considered here is the borehole stratigraphic contacts data (DTN: M09811MWDGFM03.000) used as input to the Geologic Framework Model. A Technical Assessment method used to evaluate these data with a two-fold approach: (1) comparison to the geophysical logs on which the contacts were, in part, based; and (2) evaluation of the data by mapping individual units using the entire data set. Qualification of the geophysical logs is being performed in a separate activity. A representative subset of the contacts data was chosen based on importance of the contact and representativeness of that contact in the total data set. An acceptance window was established for each contact based on the needs of the data users. Data determined to be within the acceptance window were determined to be adequate for their intended use in three-dimensional spatial modeling and were recommended to be Qualified. These methods were chosen to provide a two-pronged evaluation that examines both the origin and results of the data. The result of this evaluation is a recommendation to qualify all contacts. No data were found to lie outside the pre-determined acceptance window. Where no geophysical logs are available, data were evaluated in relation to surrounding data and …

The data set considered here is the topographic grid used in the Geologic Framework Model (GFM). The grid has been used in each version of the GFM, and was extracted from GFM3.1 (M09901MWDGFM3 1.000, file name ''topography.2grd''). The grid was given a unique DTN (M00002SPATOP00.001). A Technical Assessment method was used to evaluate these data to determine the adequacy of the grid for use in three-dimensional modeling. The topographic grid was compared to qualified borehole collar survey data (DTN: M09906GPS98410.000) and the mismatches documented. An acceptance window was established for the topographic grid based on the needs of the data users. The grid was determined to be within the acceptance window, and was determined to be adequate for its intended use in three-dimensional spatial modeling and is recommended to be Qualified.

The Li(Si)/FeS{sub 2} and Li(Si)/CoS{sub 2} couples were evaluated with a low-melting LiBr-KBr-LiF eutectic and all-Li LiCl-LiBr-LiF electrolyte for a battery application that required both high energy and high power for short duration. Screening studies were carried out with 1.25 inch-dia. triple cells and with 10-cell batteries. The Li(Si)/LiCl-LiBr-LiF/CoS{sub 2} couple performed the best under the power load and the Li(Si)/LiCl-LiBr-LiF/FeS{sub 2} was better under the energy load. The former system was selected as the best overall performer for the wide range of temperatures for both loads, because of the higher thermal stability of CoS{sub 2}.

Previously, an effective index optical model was introduced for the analysis of lateral waveguiding effects in vertical-cavity surface-emitting lasers. The authors show that the resultant transverse equation is almost identical to the one typically obtained in the analysis of dielectric waveguide problems, such as a step-index optical fiber. The solution to the transverse equation yields the lateral dependence of the optical field and, as is recognized in this paper, the discrete frequencies of the microcavity modes. As an example, they apply this technique to the analysis of vertical-cavity lasers that contain thin-oxide apertures. The model intuitively explains the experimental data and makes quantitative predictions in good agreement with a highly accurate numerical model.

The influence of ground motion on the LHC beam is estimated applying the existing theories of particle diffusion due to a weak-strong beam-beam collision with random offset at the interaction point. Noise at odd harmonics of the betatron frequency contributes significantly to particle diffusion. The spectrum of the random offset, as obtained from the ground motion spectrum at the LHC site, shows a fast fall-off with frequency and the amplitude is very small even at the first harmonic. They find that the head-on beam-beam force in the weak-strong approximation and ground motion by themselves do not induce significant diffusion over the lifetime of the beam.

A euphonium and tuba ensemble concert performed at the UNT College of Music Concert Hall.

Concert presented at Winspear Hall at the Murchison Performing Arts Center.

The US Department of Energy (DOE) Office of Biological and Environmental Research (OBER), within the Office of Science (SC), proposes to add a Field Research Center (FRC) component to the existing Natural and Accelerated Bioremediation Research (NABIR) Program. The NABIR Program is a ten-year fundamental research program designed to increase the understanding of fundamental biogeochemical processes that would allow the use of bioremediation approaches for cleaning up DOE's contaminated legacy waste sites. An FRC would be integrated with the existing and future laboratory and field research and would provide a means of examining the fundamental biogeochemical processes that influence bioremediation under controlled small-scale field conditions. The NABIR Program would continue to perform fundamental research that might lead to promising bioremediation technologies that could be demonstrated by other means in the future. For over 50 years, DOE and its predecessor agencies have been responsible for the research, design, and production of nuclear weapons, as well as other energy-related research and development efforts. DOE's weapons production and research activities generated hazardous, mixed, and radioactive waste products. Past disposal practices have led to the contamination of soils, sediments, and groundwater with complex and exotic mixtures of compounds. This contamination and its associated costs …

This paper will concentrate on the progression of the bioassay and dose evaluation programs at Savannah River Site.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Harper, Texas that includes local, state, and national news along with advertising.

This Cooperative Research and Development Agreement (CRADA) was undertaken to evaluate current and improved materials and materials processing conditions for use as components in kraft black liquor recovery boilers and other unit processes. The main areas addressed were: (1) Improved Black Liquor Nozzles, (2) Weld Overlay of Composite Floor Tubes, and (3) Materials for Lime Kilns. Iron aluminide was evaluated as an alternate material for the nozzles used to inject an aqueous solution known as black liquor into recovery boilers as well for the uncooled lining in the ports used for the nozzles. Although iron aluminide is known to have much better sulfidation resistance in gases than low alloy and stainless steels, it did not perform adequately in the environment where it came into contact with molten carbonate, sulfide and sulfate salts. Weld overlaying carbon steel tubes with a layer of stainless weld metal was a proposed method of extending the life of recovery boiler floor tubes that have experienced considerable fireside corrosion. After exposure under service conditions, sections of weld overlaid floor tubes were removed from a boiler floor and examined metallographically. Examination results indicated satisfactory performance of the tubes. Refractory-lined lime kilns are a critical component of the …

Shock loading techniques are often used to determine material response along a specific pressure loading curve referred to as the Hugoniot. However, many technological and scientific applications require accurate determination of dynamic material response that is off-Hugoniot, covering large regions of the equation-of-state surface. Unloading measurements from the shocked state provide off-Hugoniot information, but experimental techniques for measuring compressive off-Hugoniot response have been limited. A new pulsed magnetic loading technique is presented which provides previously unavailable information on isentropic loading of materials to pressures of several hundred kbar. This smoothly increasing pressure loading provides a good approximation to the high-pressure material isentrope centered at ambient conditions. The approach uses high current densities to create ramped magnetic loading to a few hundred kbar over time intervals of 100--200 ns. The method has successfully determined the isentropic mechanical response of copper to about 200 kbar and has been used to evaluate the kinetics of the alpha-epsilon phase transition occurring in iron at 130 kbar. With refinements in progress, the method shows promise for performing isentropic compression experiments to multi-Mbar pressures.

The authors report preliminary results from a study of {Lambda}{sup 0} polarization in the exclusive reaction pp {r_arrow} p{sub f} ({Lambda}{sup 0} K{sup +}) at 800 GeV/c. These data are a part of the 5 x 10{sup 9} diffractive event sample collected by Fermilab E690. They observe a large dependence of the polarization on the {Lambda}{sup 0} K{sup +} invariant mass. This observation confirms the result of the CERN ISR R608 experiment and extends the range over which the effect is observed.

A handwritten letter from Karl C. Rove to Charlie C. Francis that reads "Dear Charlie, Sorry for being so late in writing to say thanks for all your hard work in pullign together Thursday's meeting. It was a very good and useful gathering and possible only because of your work. Best, Karl". The message is on George W. Bush for President stationery.

Measured beam parameters from the Main Injector are used to calculate the beam envelope from MI extraction to the Meson area. The primary beam is then transported to a straw-man experiment in the MP beamline. Secondary yields are also calculated for the MTest test beam. For this study, it was assumed that the A0 region was modified as per Switchyard in the Main Injector Era Technical Design Report, and that the cryogenic magnets in Switchyard had EPB type gaps. Under these assumptions, it is possible to transport 120 GeV/c protons from the Main Injector to the Meson and New Muon areas with minimal (on the order of 1%) scraping. Regarding the Meson area, this scraping occurs at the FSeps (which produce the three-way split to Meson). Regarding the New Muon area, the scraping occurs at the MuSeps, MuLams (both of which establish the Neutrino/Muon split), and the final focusing quadrupoles. Thus, multi-beam, high-intensity running to the Meson area is precluded, as is high intensity running to the New Muon area.