Many Navier-Stokes codes require that the governing equations be written in conservation form with a source term. The Spalart-Allmaras one-equation model was originally developed in substantial derivative form and when rewritten in conservation form, a density gradient term appears in the source term. This density gradient term causes numerical problems and has a small influence on the numerical predictions. Further work has been performed to understand and to justify the neglect of this term. The transition trip term has been included in the one-equation eddy viscosity model of Spalart-Allmaras. Several problems with this model have been discovered when applied to high-speed flows. For the Mach 8 flat plate boundary layer flow with the standard transition method, the Baldwin-Barth and both k-{omega} models gave transition at the specified location. The Spalart-Allmaras and low Reynolds number k-{var_epsilon} models required an increase in the freestream turbulence levels in order to give transition at the desired location. All models predicted the correct skin friction levels in both the laminar and turbulent flow regions. For Mach 8 flat plate case, the transition location could not be controlled with the trip terms as given in the Spalart-Allmaras model. Several other approaches have been investigated to allow …

Chinguetti is a 4.5 kg mesosiderite find recovered from the Adra region of Mauretania. In this paper the authors analyse a portion of the recovered sample for cosmogenic radionuclides to determine its terrestrial age, and to determine its pre-atmospheric radius. They determined the terrestrial age of Chinguetti to be < 30 ky. They constrain the pre-atmospheric radius to 50--80 cm and the shielding depths of 15--25 cm. These data indicate that Chinguetti is a comparatively recent fall.

As preparation of the IPCC's Third Assessment Report takes place, one of the many observed climate variables of key interest is cloud amount. For several nations of the world, there exist records of surface-observed cloud amount dating back to the middle of the 20th Century or earlier, offering valuable information on variations and trends. Studies using such databases include Sun and Groisman (1999) and Kaiser and Razuvaev (1995) for the former Soviet Union, Angel1 et al. (1984) for the United States, Henderson-Sellers (1986) for Europe, Jones and Henderson-Sellers (1992) for Australia, and Kaiser (1998) for China. The findings of Kaiser (1998) differ from the other studies in that much of China appears to have experienced decreased cloudiness over recent decades (1954-1994), whereas the other land regions for the most part show evidence of increasing cloud cover. This paper expands on Kaiser (1998) by analyzing trends in additional meteorological variables for Chi na [station pressure (p), water vapor pressure (e), and relative humidity (rh)] and extending the total cloud amount (N) analysis an additional two years (through 1996).

This paper reports on the development of a unified one-equation model for the prediction of transitional and turbulent flows. An eddy viscosity--transport equation for nonturbulent fluctuation growth based on that proposed by Warren and Hassan is combined with the Spalart-Allmaras one-equation model for turbulent fluctuation growth. Blending of the two equations is accomplished through a multidimensional intermittency function based on the work of Dhawan and Narasimha. The model predicts both the onset and extent of transition. Low-speed test cases include transitional flow over a flat plate, a single element airfoil, and a multi-element airfoil in landing configuration. High-speed test cases include transitional Mach 3.5 flow over a 5{degree} cone and Mach 6 flow over a flared-cone configuration. Results are compared with experimental data, and the grid-dependence of selected predictions is analyzed.

The cosmogenic radionuclides, {sup 10}Be (1.5 Ma), {sup 26}Al (0.705 Ma), {sup 36}Cl (0.301 Ma), and {sup 53}Mn (3.7 Ma) were measured in selected clasts and matrix samples from the howardite Kapoeta. This work is an extension of that based on {sup 10}Be and {sup 26}Al [1]. Recent work based on measurements of cosmogenic {sup 21}Ne suggest the possibility of a complex recent exposure history for Kapoeta. The measurement of these radionuclides, in conjunction with production rates based on Monte Carlo calculations, can constrain exposure conditions and durations. Taken together, the radionuclide data are entirely consistent with a single stage 4{pi} exposure lasting {approximately} 3 Ma.

United States high-level nuclear waste from nuclear weapons production, naval propulsion programs, and the processing of commercial spent nuclear fuels is scheduled for immobilization in glass waste forms prior to permanent disposal in a mined geologic repository. Considerable attention has been directed to assessments of the subsequent long-term release of radionuclides from a repository under saturated and partially saturated conditions. Credible predictions of dose from a repository rely on insights to radionuclide sequestration in the glass, mechanisms of glass degradation, and radionuclide solubility and transport in the near-field. Underground nuclear test sites offer an unprecedented opportunity to evaluate processes relevant to repository performance in the absence of engineered barriers. Radionuclide migration programs at the Nevada Test Site represent a twenty-five year investment in the systematic investigation of the diverse radiologic source term from weapons testing and the evolution of the hydrologic source term which includes radionuclides dissolved in or otherwise available for transport by groundwater. The geology, hydrology, and geochemistry of the Nevada Test Site which includes the proposed Yucca Mountain repository provides an ideal natural laboratory to assess long-term radionuclide transport in the near and far-field. The Yucca Mountain repository shares with adjacent testing areas the following features: correlative …

During the past few decades great numbers of meteorites have been recovered from the ice accumulation zones of Antarctica and from the vast Sahara. Although these two great deserts are the two most productive areas, the Southern High Plains in USA (New Mexico and Texas) and Nullarbor Plain, Western Australia have great potential for meteorite recovery. The number of meteorite finds from Roosevelt County, New Mexico alone exceeds 100 in only approximately 11 km{sup 2} area. Most meteorites from this area have been found on the floors of active deflation basins (blowouts) that have been excavated from a mantle of sand dunes. This area has no apparent fluvial or permafrost activity within the last 50,000 years, suggesting that only prevailing winds and natural aridity aid in the concentration and preservation of meteorites. The authors investigated these deflation surfaces in Lea County (the SE corner of New Mexico) and neighboring Winkler County, Texas following a prior search in this area which found two chondrites. They found a tiny H4 chondrite in this search and here they report its mineralogy and petrology along with preliminary data on its exposure history.

A 1.5 cm long, 1.2 g specimen of the Eltanin meteorite was found at 10.97 m depth in Polarstern piston core PS2704-1. The early studies indicated that the small fragments of the Eltanin meteorite was debris from a km-sized asteroid which impacted into the deep-ocean basin. In this study, the authors measured {sup 39}Ar-{sup 40}Ar age, noble gases, and cosmogenic radionuclides in splits of specimen as a part of consortium studies of Eltanin meteorite. They concluded that the specimen was about 3 m deep from the asteroid surface. The exposure age of the Eltanin asteroid was about 20 Myr.

Terrestrial ages of Antarctic meteorites are one of the few parameters that will help us to understand the meteorite concentration mechanism on blue-ice fields. Traditionally, terrestrial ages were determined on the basis of {sup 36}Cl in the metal phase, which has an uncertainty of about 70 ky. For young meteorites (< 40 ky), the terrestrial age is usually and most accurately determined using {sup 14}C in the stone phase. In recent years two methods have been developed which are independent of shielding effects, the {sup 10}Be-{sup 36}Cl/{sup 10}Be method and the {sup 41}Ca/{sup 36}Cl method. These methods have reduced the typical uncertainties in terrestrial ages by a factor of 2, to about 30 ky. The {sup 10}Be-{sup 36}Cl/{sup 10}Be method is quite dependent on the exposure age, which is unknown for most Antarctic meteorites. The authors therefore also attempt to use the relation between {sup 26}Al and {sup 36}Cl/{sup 26}Al to derive a terrestrial age less dependent on the exposure age. The authors have measured the concentrations of cosmogenic {sup 10}Be, {sup 26}Al and {sup 36}Cl in the metal phase of {approximately} 70 Antarctic meteorites, from more than 10 different ice-fields, including many new ones. They then discuss the trends …

Experimentation, theory and modeling have all played vital roles in defining what is known about microstructural evolution and the effects of microstructure on material properties. Recently, technology has become an enabling factor, allowing significant advances to be made on several fronts. Experimental evidence of crystallographic slip and the basic theory of crystal plasticity were established in the early 20th Century, and the theory and models evolved incrementally over the next 60 years. (Asaro provides a comprehensive review of the mechanisms and basic plasticity models.) During this time modeling was primarily concerned with the average response of polycrystalline aggregates. While some detailed finite element modeling (FEM) with crystal plasticity constitutive relations was done in the early 1980s, such simulations over taxed the capabilities of the available computer hardware. Advances in computer capability led to a flurry of activity in finite element modeling in the next 10 years, increasing understanding of microstructure evolution and pushing the limits of theories and material characterization. Automated Electron Back Scatter Diffraction (EBSD) has produced a similar revolution in material characterization. The data collected is extensive and many questions about the evolution of microstructure and its role in determining mechanic properties can now be addressed. It is …

None

The Engineering Test Stand (ETS) is an EUV laboratory lithography tool. The purpose of the ETS is to demonstrate EUV full-field imaging and provide data required to support production-tool development. The ETS is configured to separate the imaging system and stages from the illumination system. Environmental conditions can be controlled independently in the two modules to maximize EUV throughput and environmental control. A source of 13.4 nm radiation is provided by a laser plasma source in which a YAG laser beam is focused onto a xenon-cluster target. A condenser system, comprised of multilayer-coated mirrors and grazing-incidence mirrors, collects the EUV radiation and directs it onto a-reflecting reticle. A four-mirror, ring-field optical system, having a numerical aperture of 0.1, projects a 4x-reduction image onto the wafer plane. This design corresponds to a resolution of 70nm at a k{sub 1} of 0.52. The ETS is designed to produce full-field images in step: and-scan mode using vacuum-compatible, one-dimension-long-travel magnetically levitated stages for both reticle and wafer. Reticle protection is incorporated into the ETS design. This paper provides a system overview of the ETS design and specifications.

The finite element method is being used today to model component assemblies in a wide variety of application areas, including structural mechanics, fluid simulations, and others. Generating hexahedral meshes for these assemblies usually requires the use of geometry decomposition, with different meshing algorithms applied to different regions. While the primary motivation for this approach remains the lack of an automatic, reliable all-hexahedral meshing algorithm, requirements in mesh quality and mesh configuration for typical analyses are also factors. For these reasons, this approach is also sometimes required when producing other types of unstructured meshes. This paper will review progress to date in automating many parts of the hex meshing process, which has halved the time to produce all-hex meshes for large assemblies. Particular issues which have been exposed due to this progress will also be discussed, along with their applicability to the general unstructured meshing problem.

Commercialization and transfer of technology from laboratories in academia, government, and industry has only met a fraction of its potential and is currently an art not a science. The line of sight approach developed and in use at Sandia National Laboratories, is used to better understand commercialization and transfer of technology. The line of sight process integrates technology description, the dual process model of innovation and the product introduction model. The model, that the line of sight is based OR is presented and the application of the model to both disruptive and sustaining technologies is illustrated. Work to date suggests that the differences between disruptive and sustaining technologies are critical to quantifying the level of risk and choosing the commercialization path. The applicability of the line of sight to both disruptive and sustaining technologies is key to the success of the model and approach.

The goal of the Plutonium Immobilization Program is the immobilization of surplus weapons usable plutonium in a ceramic form. The ceramic will then be encapsulated in high level waste glass using the can-in-can configuration. In the ceramic line of the immobilization plant, surplus plutonium oxide of less than 100 micron particle size will be received for immobilization. The plutonium oxide must be sized reduced and intimately blended with uranium oxide and the other ceramic forming materials containing neutron poisons to allow for complete interaction during sintering. Once properly blended, the formulation will be pressed into the desired ceramic form and then sintered to produce the targeted mineral phases. The equipment of choice for the size reduction of the actinides and the blending with the precursor materials is the Union Process attritor mill. The attritor mill is best described as a stirred ball mill and consists of a stationary tank filled with grinding media that is agitated by a shaft with stirring arms. The rotational shaft stirs the media at high-speed causing shearing and impact forces on the material resulting in size reduction and dispersion. Speeds over 1000 rpm can be reached by the stirring shaft. The high-speed of the attritor …

Atoms and molecules adsorbed on metals affect each other even over considerable distances. In a tour-de-force of density-functional methods, the authors establish the nature and strength of such indirect interactions, and explain for what adsorbate systems they can critically affect important materials properties. These perceptions are verified in kinetic Monte Carlo simulations of epitaxial growth, and help rationalize a cascade of recent experimental reports on anomalously low diffusion prefactors. The authors focus their study on two metal systems: Al/Al(111) and Cu/Cu(111).

With the advent of electron-optical systems able to generate negative spherical aberration (usually called ''Cs correctors''), it has now become feasible to zero-out objective lens Cs in the high-resolution transmission electron microscope. However, I show that - instead of tuning out spherical aberration completely - there is an optimum value for the residual Cs that maximizes information transfer to the best possible resolution and depends only on the information limit of the microscope.

Results on a variety of mixed ABO{sub 3} oxides have revealed a pressure-induced ferroelectric-to-relaxor crossover and the continuous evolution of the energetics and dynamics of the relaxation process with increasing pressure. These common features have suggested a mechanism for the crossover phenomenon in terms of a large decrease in the correlation length for dipolar interactions with pressure--a unique property of soft mode or highly polarizable host lattices. The pressure effects as well as the interplay between pressure and dc biasing fields are illustrated for some recent results on PZN-9.5 PT,PMN and PLZT 6/65/35.

Thirty-one participants representing 21 reactors, fuel developers, fuel fabricators, and fuel reprocessors in 11 countries discussed the requirements for qualification of U-MO alloy fuel at a workshop held at Argonne National Laboratory on January 17--18, 2000. Consensus was reached that the qualification plans of the US RERTR program and the French U-Mo fuel development program are valid. The items to be addressed during qualification are summarized in the paper.

The objective of this study is to examine, by small angle X-ray scattering (SAXS), the formation of soot from individual coal particle combustion in a methane flat flame burner. The SAXS instrument at the Basic Energy Sciences Synchrotron Radiation Center (BESSRC) at the Advanced Photon Source (APS) can be used to observe both the formation of spherules and clusters since it can access length scales of 6--6000 {angstrom}. The high X-ray flux enables rapid acquisition of scattering data of various regions of the flame. SAXS data reveal particle size, shape, surface areas, and surface roughness.

A spray-suppression model that captures the effects of liquid suppressant on a turbulent combusting flow is developed and applied to a turbulent diffusion flame with water spray suppression. The spray submodel is based on a stochastic separated flow approach that accounts for the transport and evaporation of liquid droplets. Flame extinguishment is accounted for by using a perfectly stirred reactor (PSR) submodel of turbulent combustion. PSR pre-calculations of flame extinction times are determined using CHEMKIN and are compared to local turbulent time scales of the flow to determine if local flame extinguishment has occurred. The PSR flame extinguishment and spray submodels are incorporated into Sandia's flow fire simulation code, VULCAN, and cases are run for the water spray suppression studies of McCaffrey for turbulent hydrogen-air jet diffusion flames. Predictions of flame temperature decrease and suppression efficiency are compared to experimental data as a function of water mass loading using three assumed values of drop sizes. The results show that the suppression efficiency is highly dependent on the initial droplet size for a given mass loading. A predicted optimal suppression efficiency was observed for the smallest class of droplets while the larger drops show increasing suppression efficiency with increasing mass loading …

Validation of nuclear power reactor signals is often performed by comparing signal prototypes with the actual reactor signals. The signal prototypes are often computed based on empirical data. The implementation of an estimation algorithm which can make predictions on limited data is an important issue. A new machine learning algorithm called support vector machines (SVMS) recently developed by Vladimir Vapnik and his coworkers enables a high level of generalization with finite high-dimensional data. The improved generalization in comparison with standard methods like neural networks is due mainly to the following characteristics of the method. The input data space is transformed into a high-dimensional feature space using a kernel function, and the learning problem is formulated as a convex quadratic programming problem with a unique solution. In this paper the authors have applied the SVM method for data-based state estimation in nuclear power reactors. In particular, they implemented and tested kernels developed at Argonne National Laboratory for the Multivariate State Estimation Technique (MSET), a nonlinear, nonparametric estimation technique with a wide range of applications in nuclear reactors. The methodology has been applied to three data sets from experimental and commercial nuclear power reactor applications. The results are promising. The combination of …

Laminated metal composites have been cited in antiquity; for example, a steel laminate that may date as far back as 2750 B.C., was found in the Great Pyramid in Gizeh in 1837. A laminated shield containing bronze, tin, and gold layers, is described in detail by Homer. Well-known examples of steel laminates, such as an Adze blade, dating to 400 B.C. can be found in the literature. The Japanese sword is a laminated composite at several different levels and Merovingian blades were composed of laminated steels. Other examples are also available, including composites from China, Thailand, Indonesia, Germany, Britain, Belgium, France, and Persia. The concept of lamination to provide improved properties has also found expression in modern materials. Of particular interest is the development of laminates including high carbon and low carbon layers. These materials have unusual properties that are of engineering interest; they are similar to ancient welded Damascus steels. The manufacture of collectable knives, labeled ''welded Damascus'', has also been a focus of contemporary knifemakers. Additionally, in the Former Soviet Union, laminated composite designs have been used in engineering applications. Each of the above areas will be briefly reviewed, and some of the metallurgical principles will be described …

An array of ultrasonic transducers was constructed consisting of three identical arrays at various depths in an air intake shaft at the Waste Isolation Pilot Plant (WIPP). Each array consists of transducers permanently installed in three holes arranged in an L shape. An active array, created by appropriate arrangement of the transducers and selection of transmitter-receiver pairs, allows the measurement of transmitted signal velocities and amplitudes (for attenuation studies) along 216 paths parallel, perpendicular and tangential to the shaft walls. Transducer positions were carefully surveyed, allowing absolute velocity measurements. Installation occurred over a period of about two years beginning in early 1989, with nearly continuous operation since that time, resulting in a rare, if not unique, record of the spatial and temporal variability of damage development around an underground opening. This paper reports results from the last two years of operation, updating the results reported by Holcomb, 1999. Results will be related to the damage, due to microcracking, required to produce the observed changes. It is expected that the results will be useful to other studies of the long-term deformation characteristics of salt.