This Record of Technical Change provides updates to the technical information included in the ``Fluid Management Plan for the Project Shoal Area Off-sites Project,'' April 1999

This Record of Technical Change provides updates to the technical information included in ``Corrective Action Investigation Plan for Corrective Action Unit 143: Area 25 Contaminated Waste Dumps, Nevada Test Site, Nevada.''

This document describes the implementation of periodic boundary conditions in the ALEGRA finite element code. ALEGRA is an arbitrary Lagrangian-Eulerian multi-physics code with both explicit and implicit numerical algorithms. The periodic boundary implementation requires a consistent set of boundary input sets which are used to describe virtual periodic regions. The implementation is noninvasive to the majority of the ALEGRA coding and is based on the distributed memory parallel framework in ALEGRA. The technique involves extending the ghost element concept for interprocessor boundary communications in ALEGRA to additionally support on- and off-processor periodic boundary communications. The user interface, algorithmic details and sample computations are given.

Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a users guide to the input for Salinas. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.

This report presents results for design and analysis of the hot model water cooling system for the Spallation Neutron Source (SNS) coupled-cavity linac (CCL). The hot model, when completed, will include segments for both the CCL and coupled-cavity drift-tube linac (CCDTL). The scope of this report encompasses the modeling effort for the CCL portion of the hot model. This modeling effort employed the SINDA/FLUINT network modeling tool. This report begins with an introduction of the SNS hot model and network modeling using SINDA/FLUINT. Next, the development and operation of the SINDA/FLUINT model are discussed. Finally, the results of the SINDA/FLUINT modeling effort are presented and discussed.

The processes of defining managerial roles and providing for delegation of authority are essential to any enterprise. At most large organizations, these processes are defined in policy manuals and through sets of standard operating procedures for many, if not all, business and administrative functions. Many of these staff-initiated, administrative functions require the routing of documents for approval to one or more levels of management. These employee-oriented, back office types of workflows tend to require more flexibility in determining to whom these documents should go to, while, at the same time, providing the responsible parties with the flexibility to delegate their approval authority or allow others to review their work. Although this practice is commonplace in manual, paper-based processes that exist in many organizations, it is difficult to provide the same flexibility in the more structured, electronic-based, workflow systems. The purpose of this report is to present a framework or architecture for creating a R/DA system and provide some insights associated with its design and utilization. To improve understanding and clarify subsequent discussion, the goals and requirements for the major R/DA system components, namely, the database and interface modules, are initially presented along with the identification of important concepts and the …

The purpose of this program was to examine methods of increasing the efficiency of producing pulses to drive Klystrons in the 150 MW range. This may include 2 Klystrons in the 75 MW range. Specific methods of interest to improve the pulse efficiency were the use of a circuit to add energy to the tail of the pulse, the use of a bipyrimidal transformer, and the use of gas insulation as a means of improving the pulse shape. These methods were investigated using both thyratron and IGBT switching. The low cost designs developed in this work consisted of low voltage designs which don't require the oil immersion. These designs can be ''hot tuned'' based on the use of simple, tunable inductors.

Simultaneous removal of SO{sub 2} and NO{sub x} using a regenerable solid sorbent will constitute an important improvement over the use of separate processes for the removal of these two pollutants from stack gases and possibly eliminate several shortcomings of the individual SO{sub 2} and NO{sub x} removal operations. The work done at PETC and the DOE-funded research of the investigators on the sulfation and regeneration of alumina-supported cerium oxide sorbents have shown that they can perform well at relatively high temperatures (823-900 K) as regenerable desulfurization sorbents. Survey of the recent literature shows that addition of copper oxide to ceria lowers the sulfation temperature of ceria down to 773 K, sulfated ceria-based sorbents can function as selective SCR catalysts even at elevated temperatures, SO{sub 2} can be directly reduced to sulfur by CO on CuO-ceria catalysts, and ceria-based catalysts may have a potential for selective catalytic reduction of NO{sub x} by methane. These observations indicate a possibility of developing a ceria-based sorbent/catalyst which can remove both SO{sub 2} and NO{sub x} from flue gases within a relatively wide temperature window, produce significant amounts of elemental sulfur during regeneration, and use methane for the selective catalytic reduction of NO{sub x}. …

During the 1998 running of the Crystal Ball experiment, a couple of brief test runs were done with the C6 beamline tuned to produce antiprotons. Specifically, one shift on July 29th produced runs 329-334 with the beam momentum set for 650 MeV/c, run 355 was done on July 31st with a 550 MeV/c beam momentum, and run 926-929 were obtained in a single shift on November 3rd, also with a beam momentum of 550 MeV/c. The beam tune for the November data was greatly superior to that of the July data, however. Therefore, only the November data have been analyzed in detail, and the results of this analysis are presented in this note. Due to the paucity of statistics that were obtained, it was decided not to attempt to publish the results. However, the results are valuable as a tool for planning a possible future program of dedicated measurements of antiproton-proton annihilation into all-neutral final states using the Crystal Ball. The data in fact show that the Crystal Ball with its large angular acceptance and multi-photon capability would be an excellent detector for such an experiment. Only one other such experiment (the Crystal Barrel experiment at CERN/LEAR) has ever been …

The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to about 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million bbl of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-(CO-) flood 2 project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meetings, and publication in newsletters and various technical or trade journals.

The NGDRS steering committee met at Unocal's offices on October 1, 1998 in Sugar Land, Texas to review and discuss issues of data transfer and the continued development of the Stapleton prospect for establishment of a national core repository. Company representatives reaffirmed their commitment to donate geoscience data to the NGDRS once appropriate facilities are available.

Because more than 90 percent of U.S. coal-fired utility boilers are equipped with electrostatic precipitators (ESPs), retrofitable ESP technologies represent a logical approach towards achieving the Department of Energy's (DOE) goal of a major reduction in fine particulate and mercury emissions (air toxics) from coal based power systems. EPA's recent issuance of significantly tightened ambient air standards for particles smaller than 2.5 {micro}m (PM{sub 2.5}) creates a new urgency for developing cost-effective means to control fine particulate emissions. This challenge is compounded by the on-going switch in the utility industry to low-sulfur Powder River Basin (PRB) coals, that generate higher resistivity and difficult-to-collect fly ash. Particulate emissions can increase by a factor of ten when a utility switches to a low-sulfur coal. Numerous power plants are presently limited in operation by the inability of their ESPs to control opacity at high loads. In Phase I of this program, ABB investigated five technologies to improve the collection of fine particulate and trace metals in ESPs. These included: (1) flue-gas cooling, (2) flue-gas humidification, (3) pulsed energization, (4) wet ESP and precharger modules, and (5) sorbent injection for mercury control. Tests were conducted with an Eastern bituminous coal and a Powder River …

None

The purpose of this report is to document the results of a study designed to enhance the performance of future military generator sets (gen-sets) in the medium power range. The study includes a market survey of the state of the art in several key component areas and recommendations comprising a design philosophy for future military gen-sets. The market survey revealed that the commercial market is in a state of flux, but it is currently or will soon be capable of providing the technologies recommended here in a cost-effective manner. The recommendations, if implemented, should result in future power generation systems that are much more functional than today's gen-sets. The number of differing units necessary (both family sizes and frequency modes) to cover the medium power range would be decreased significantly, while the weight and volume of each unit would decrease, improving the transportability of the power source. Improved fuel economy and overall performance would result from more effective utilization of the prime mover in the generator. The units would allow for more flexibility and control, improved reliability, and more effective power management in the field.

The purpose of this calculation is to characterize the criticality aspect of the codisposal of TRIGA (Training, Research, Isotopes, General Atomic) reactor spent nuclear fuel (SNF) with Savannah River Site (SRS) high-level waste (HLW). The TRIGA SNF is loaded into a Department of Energy (DOE) standardized SNF canister which is centrally positioned inside a five-canister defense SRS HLW waste package (WP). The objective of the calculation is to investigate the criticality issues for the WP containing the five SRS HLW and DOE SNF canisters in various stages of degradation. This calculation will support the analysis that will be performed to demonstrate the viability of the codisposal concept for the Monitored Geologic Repository (MGR).

This quarterly report is based on the last activity above. It gives a brief account of the work and the complete study will be included in the next Annual Report of the project.

The work on modeling hydraulically fractured horizontal wells has moved forward. A literature review on the subject was done and some of the existing models have been coded and applied to example problems for evaluation purposes. Previous work on the elects of heterogeneities on the performance of horizontal wells was continued by conducting a sensitivity study on various parameters that were kept constant in the earlier study. For example, we have studied the elect of gas cap and aquifer size, well location, fluid viscosity, etc. The experimental work on using horizontal wells as injectors and producers in a gas injection gravity drainage process continued. New and repeat experiments were conducted. Work on streamline grids was advanced by considering example problems with highly distorted grids which cannot be directly used for flow simulation. Grid smoothing and domain mapping techniques were investigated to handle such situations. A technique was developed for the computation o f well index with consideration to wellbore pressure drop. A recently developed reservoir/wellbore coupling model was used for this purpose.

The generation of suitable simulation grids for heterogeneous media and specific discretization issues that arise. Streamlines and equipotentials are used to define our base grids. Since streamlines are concentrated in high velocity regions they provide a natural means of clustering fine grid cells in crucial flow regions. For complex configurations and particularly for strongly heterogeneous regions the resulting grid cells can become very distorted due to extremely high curvatures. Two types of cell centered formulation are examined together with a cell vertex-point distributed scheme. Important distinctions are found for highly distorted cells. The new grids are tested for accuracy in terms of critical breakthrough parameters and it is shown that a much higher level of grid resolution is required by conventional simulators in order to achieve results that are comparable with those computed on relatively coarse streamline-potential grids.

The design of the more than 300 in-vessel sensor systems for the National Spherical Torus Experiment (NSTX) has encountered several challenging fusion reactor diagnostic issues involving high temperatures and space constraints. This has resulted in unique miniature, high temperature in-vessel sensor systems mounted in small spaces behind plasma facing armor tiles, and they are prototypical of possible high power reactor first-wall applications. In the Center Stack, Divertor, Passive Plate, and vessel wall regions, the small magnetic sensors, large magnetic sensors, flux loops, Rogowski Coils, thermocouples, and Langmuir Probes are qualified for 600 degrees C operation. This rating will accommodate both peak rear-face graphite tile temperatures during operations and the 350 degrees C bake-out conditions. Similar sensor systems including flux loops, on other vacuum vessel regions are qualified for 350 degrees C operation. Cabling from the sensors embedded in the graphite tiles follows narrow routes to exit the vessel. The detailed sensor design and installation methods of these diagnostic systems developed for high-powered ST operation are discussed.

None

The objective of this analysis is to design and analyze the lifting bail of the 22 Ton Steel Waste Disposal Box (SWDB). The new design takes the original lifting bail and adds a hinge allowing the top portion of the bail to fold over towards the lid.

This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for PFP's Vault Operations system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to perform its safety function.

None

None