Shock-wave experiments on iron preheated to 1,573 K conducted from 14 to 73 GPa, yield new data for sound velocities of the {gamma}- and liquid-phases. Melting was observed in the highest pressure ({approximately} 71 {+-} 2 GPa) experiments at calculated shock temperatures of 2,775 {+-} 160 K. This single crossing of the {gamma}-liquid boundary measured here agrees closely with the {gamma}-iron melting line determined by Boehler [1993], Saxena et al. [1993], and Jephcoat and Besedin [1997]. This {gamma}-iron melting curve is {approximately} 300 C lower than that of Shen et al. [1998b] at 80 GPa.

Student newspaper of the University of Oklahoma in Norman, Oklahoma that includes national, local, and campus news along with advertising.

Achieving parallelism in simulations that use Monte Carlo transport methods presents interesting challenges. For problems that require domain decomposition, load balance can be harder to achieve. The Monte Carlo transport package may have to operate with other packages that have different optimal domain decompositions for a given problem. To examine some of these issues, we have developed a code that simulates the interaction of a laser with biological tissue; it uses a Monte Carlo method to simulate the laser and a finite element model to simulate the conduction of the temperature field in the tissue. We will present speedup and load balance results obtained for a suite of problems decomposed using a few domain decomposition algorithms we have developed.

A response surface methodology-based technique is presented for treating discretization error in non-deterministic analysis. The response surface, or metamodel, is estimated from computer experiments which vary both uncertain physical parameters and the fidelity of the computational mesh. The resultant metamodel is then used to propagate the variabilities in the continuous input parameters, while the mesh size is taken to zero, its asymptotic limit. With respect to mesh size, the metamodel is equivalent to Richardson extrapolation, in which solutions on coarser and finer meshes are used to estimate discretization error. The method is demonstrated on a one dimensional prismatic bar, in which uncertainty in the third vibration frequency is estimated by propagating variations in material modulus, density, and bar length. The results demonstrate the efficiency of the method for combining non-deterministic analysis with error estimation to obtain estimates of total simulation uncertainty. The results also show the relative sensitivity of failure estimates to solution bias errors in a reliability analysis, particularly when the physical variability of the system is low.

An analysis was performed to estimate the costs associated with storing and transporting hydrogen. These costs can be added to a hydrogen production cost to determine the total delivered cost of hydrogen. Storage methods analyzed included compressed gas, liquid hydrogen, metal hydride, and underground storage. Major capital and operating costs were considered over a range of production rates and storage times.

The electrostriction of composites consisting of dielectric particles embedded in a gel or elastomer is discussed. It is shown that when these particles are organized by a uniaxial field before gelation, the resulting field-structured composites are expected to exhibit enhanced electrostriction in a uniform field applied along the same axis as the structuring field. The associated stresses might be large enough to form the basis of a polymer-based fast artificial muscle.

The advent of the 20-MA Z accelerator [R.B. Spielman, C. Deeney, G.A. Chandler, et al., Phys. Plasmas 5, 2105, (1997)] has enabled implosions of large diameter, high-wire-number arrays of titanium to begin testing Z-pinch K-shell scaling theories. The 2-cm long titanium arrays, which were mounted on a 40-mm diameter, produced between 75{+-}15 to 125{+-}20 kJ of K-shell x-rays. Mass scans indicate that, as predicted, higher velocity implosions in the series produced higher x-ray yields. Spectroscopic analyses indicate that these high velocity implosions achieved peak electron temperatures from 2.7{+-}0.1 to 3.2{+-}0.2 keV and obtained a K-shell emission mass participation of up to 12%.

Oxidation of layers of high-Al-content III-V materials by water vapor has become the enabling process for high-efficiency vertical cavity surface emitting lasers (VCSELS) and has potential applications for reducing substrate current leakage in GaAs-on-insulator (GOI) MESFETS. Because of the established importance of wet oxidation in optoelectronic devices and its potential applications in electronic devices, it has become increasingly important to understand the mechanism of wet oxidation and how it might be expected to affect both the fabrication and subsequent operation of devices that have been made using this technique. The mechanism of wet oxidation and the consequence of this mechanism for heterostructure design and ultimate device operation are discussed here.

Development of useful high-T{sub c} superconductors requires synthesis of superconducting compounds; fabrication of wires, tapes, and films from these compounds; production of composite structures that incorporate stabilizers or insulators; and design and testing of efficient components. This report describes FY 1998 technical progress of research and development efforts aimed at producing superconducting components in the Bi-(Pb)-Sr-Ca-Cu and Y-Ba-Cu oxide systems. Topics discussed are synthesis and heat treatment of high-T{sub c} superconductors, formation of monolithic and composite conductors, characterization of structures and superconducting and mechanical properties, and fabrication and testing of prototype components. Collaborations with industry and academia are documented.

This report provides general guidance to committees for conducting meetings to mark up legislation.

This report describes the process of reaching the final agreement between house and senate over the final version of a bill that the two houses have passes in different forms.

The powder-in-tube technique, consisting of wire drawing and rolling, has been widely used to fabricate superconducting tapes for possible electric power applications. In this study, instead of wire drawing, the starting billet was reduced in size by groove rolling. To optimize the deformation and thermomechanical treatment process, wires of varying dimensions were fabricated. The wires were flat-rolled to a final thickness of 250 mm. Short-length tapes were subjected to a series of thermal and deformation steps. Phase development and microstructural evolution during the process were monitored by XRD, SEM, and TEM. The BSCCO-2223 tapes, which were subjected to thermomechanical treatment, had average critical current densities of 18,000 A cm{sup {minus}2}. Colony boundaries, examined by TEM, near the superconductor-silver interface were found to form in certain preferred orientations. Polytypoids of 2212 phase were also observed at the colony boundary. The effects of grain boundary on superconducting order parameter and critical current density have also been examined.

None

In this paper we evaluate the design of the hybrid evolutionary algorithms (EAs) that are currently used to perform flexible ligand binding in the Autodock docking software. Hybrid EAs incorporate specialized operators that exploit domain-specific features to accelerate an EA's search. We consider hybrid EAs that use an integrated local search operator to reline individuals within each iteration of the search. We evaluate several factors that impact the efficacy of a hybrid EA, and we propose new hybrid EAs that provide more robust convergence to low-energy docking configurations than the methods currently available in Autodock.

This report provides background information regarding the bill and joint resolution, which must be passed by both houses in identical form, then presented to the President for his approval or disapproval.

In this paper we describe a unified, hierarchical computational approach to aging and reliability problems caused by materials changes in the oxide layers of Si-based microelectronic devices. We apply this method to a particular low-dose-rate radiation effects problem

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

A test technique has been devised which is suitable for the testing of the bond strength of batch diffusion bonded LIGA or DXRL defined structures. The method uses a torsion tester constructed with the aid of LIGA fabrication and distributed torsion specimens which also make use of the high aspect ratio nature of DXRL based processing. Measurements reveal achieved bond strengths of 130MPa between electroplated nickel with a bond temperature of 450 C at 7 ksi pressure which is a sufficiently low temperature to avoid mechanical strength degradation.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Because the minimum wage is not indexed to the price level, it has been legislatively increased from time to time to make up for the loss in its real value due to inflation. In nominal terms, the minimum wage has risen steadily since 1938 from 25 cents an hour to $5.15 where it now stands. But the legislated adjustments to the minimum wage have occurred at irregular intervals. As a result, there has been significant variation in the purchasing power of the minimum wage.

The release of materials containing residual radioactivity from a controlled environment in decontamination and decommissioning (D&D) activities has been problematic. The primary impediment to such a release is the lack of a suitable framework within which release standards can be developed. The concept of clearance for radioactive materials was recently introduced by the International Atomic Energy Agency (IAEA) (l). This concept is being evaluated by the international regulatory communities as a basis for setting standards for releasing from control solid materials containing residual radioactivity. Accordingly, both the IAEA (2) and the European Commission (EC) (3) have recently proposed clearance standards. In the US, the Nuclear Regulatory Commission (USNRC) has just begun its rule-making process on clearance. The term ''clearance'' was introduced as a regulatory process for releasing radioactive materials posing negligible risks. A trivial risk level has been determined to be a 10{sup {minus}6} to 10{sup {minus}7} annual risk to an exposed individual, and a population risk of no more than 0.1 for an annual practice. Under these strict constraints, exposure scenarios would be developed to estimate potential doses to affected individuals. Such scenarios may account for processing, disposal, and product end-use of materials. This paper discusses these scenarios and …

A technique using diffusion bonding (or solid-state welding) has been used to achieve batch fabrication of two- level nickel LIGA structures. Interlayer alignment accuracy of less than 1 micron is achieved using press-fit gauge pins. A mini-scale torsion tester was built to measure the diffusion bond strength of LIGA formed specimens that has shown successful bonding at temperatures of 450"C at 7 ksi pressure with bond strength greater than 100 Mpa. Extensions to this basic process to allow for additional layers and thereby more complex assemblies as well as commensurate packaging are discussed.

Precision high aspect-ratio micro molds constructed by deep x-ray lithography have been used to batch fabricate accurately shaped bonded rare-earth based permanent magnets with features as small as 5 microns and thicknesses up to 500 microns. Maximum energy products of up to 8 MGOe have been achieved with a 20%/vol. epoxy bonded melt-spun isotropic Nd2Fe14b powder composite. Using individually processed sub- millimeter permanent sections multipole rotors have been assembled. Despite the fact that these permanent magnet structures are small, their magnetic field producing capability remains the same as at any scale. Combining permanent magnet structures with soft magnetic materials and micro-coils makes possible new and more efficient magnetic microdevices.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.