It has been said more than once that the critical link between explosion models and observations is the ability to accurately simulate cooling and radiation transport in the expanding ejecta of Type Ia supernovae. It is perhaps frustrating to some of the theorists who study explosion mechanisms, and to some of the observers too, that more definitive conclusions have not been reached about the agreement, or lack thereof, between various Type Ia supernova models and the data. Although claims of superlative accuracy in transport simulations are sometimes made, I will argue here that there are outstanding issues of critical importance and in need of addressing before radiation transport calculations are accurate enough to discriminate between subtly different explosion models.

Radio continuum emission at cm wavelengths is relatively little affected by extinction. When combined with far-infrared (FIR) surveys this provides for a convenient and unbiased method to select (radio-loud) AGN and starbursts deeply embedded in gas and dust-rich galaxies. Such radio-selected FIR samples are useful for detailed investigations of the complex relationships between (radio) galaxy and starburst activity, and to determine whether ULIRGs are powered by hidden quasars (monsters) or young stars (babies). We present the results of a large program to obtain identifications and spectra of radio-sleected, optically faint IRAS/FSC objects using the FIRST/VLA 20 cm survey (Becker, White and Helfand 1995). These objects are all radio-'quiet' in the sense that their radio power/FIR luminosities follow the well-known radio/FIR relationship for star forming galaxies. We compare these results to a previous study by our group of a sample of radio-'loud' IRAS/FSC ULIRGs selected from the Texas 365 MHz survey (Douglas et al. 1996). Many of these objects also show evidence for dominant, A-type stellar populations, as well as high ionization lines usually associated with AGN. These radio-loud ULIRGs have properties intermediate between those of starbursts and quasars, suggesting a possibile evolutionary connection. Deep Keck spectroscopic observations of three ULIRGs …

Evidence for capillary waves at a liquid/vapor interface are presented from extensive molecular dynamics simulations of a system containing up to 1.24 million Lennard-Jones particles. Careful measurements show that the total interfacial width depends logarithmically on L{sub {parallel}}, the length of the simulation cell parallel to the interface, as predicted theoretically. The strength of the divergence of the interfacial width on L{sub {parallel}} depends inversely on the surface tension {gamma}. This allows us to measure {gamma} two ways since {gamma} can also be obtained from the difference in the pressure parallel and perpendicular to the interface. These two independent measures of {gamma} agree provided that the interfacial order parameter profile is fit to an error function and not a hyperbolic tangent, as often assumed. We explore why these two common fitting functions give different results for {gamma}.

The performance of transparent optics in high fluence applications is often dominated by inhomogeneities in the first few hundred nanometers of material. Defects undetectable with optical methods can cause catastrophic failures when used in critical applications where high strength, chemical or mechanical resistance or extreme smoothness is required. Not only are these defects substantially smaller than the wavelength of visible light, they are often concealed below a layer of glass-like material deposited during the polishing process. In high quality glass, the chemical and material properties of the outermost layer are modified by the grinding, lapping and polishing processes used in fabrication. Each succeeding step in a process is designed to remote damage from the previous operation. However, any force against the surface, no matter how slight will leave evidence of this damage. These processes invariably create dislocations, cracks and plastic deformation in the subsurface region.

At the Rocky Flats Environmental Technology Site (RFETS), the D&D task is enormous. Tons of plutonium has been processed over the years in approximately 1,000 gloveboxes, This represents nearly half of the gloveboxes in the DOE complex. In addition, more than a thousand tanks of various designs, with miles of associated piping, supported the processes. A wide variety of operations were performed at RFETS, including aqueous processing, pyrophoric processing, hydriding and dehydriding, metal casting, and machining of plutonium. Various materials have been handled at the facility, including plutonium, uranium, americium, tantalum, beryllium, chloride salts, and various acids and solvents. Significant amounts of plutonium residues remain in inaccessible equipment in the facilities, which create criticality safety issues. Some of the plutonium has been at RFETS for many years, and there is significant in-growth of americium, a decay product that emits gamma radiation, which potentially increases exposure to the workers. The size reduction portion of the D&D will be difficult and costly. The gloveboxes and tanks are constructed of stainless steel, frequently with lead shielding or double walls that hold water for neutron shielding. Window mountings, glove port rings, site gages, bolted flanges, and various penetrations reinforce the walls. Tanks may be …

Use of Gulf Coast salt domes for construction of very large storage caverns by solution mining has grown significantly in the last several decades. In fact, a nationally important Strategic Petroleum Reserve (SPR) storage occurs in large cavern arrays in some of these domes. Although caverns have been operated economically for these many years, these caverns have a range of relatively poorly understood behaviors, involving creep closure fluid loss and damage from salt falls. It is certainly possible to postulate that many of these behaviors stem from geomechanical or deformational aspects of the salt response. As a result, a method of correlating the cavern response to mechanical creep behavior as determined in the laboratory could be of considerable importance. Recently, detailed study of the creep response of domal salts has cast some insight into the influence of different salt origins on cavern behavior. The study used a simple graphical analysis of the limited non-steady state data to give a bound, or an approach to steady state, as an estimate of the steady state behavior of a given domal salt. This permitted the analysis of sparse creep databases for domal salts. It appears that a shortcoming of the steady state analysis …

SUMMiT (Sandia Ultra-planar Multi-level MEMS Technology) at the Sandia National Laboratories' MDL (Microelectronics Development Laboratory) is a standardized MEMS (Microelectromechanical Systems) technology that allows designers to fabricate concept prototypes. This technology provides four polysilicon layers plus three sacrificial oxide layers (with the third oxide layer being planarized) to enable fabrication of complex mechanical systems-on-a-chip. Quantified reproducibility of the SUMMiT process is important for process engineers as well as designers. Summary statistics for critical MEMS technology parameters such as film thickness, line width, and sheet resistance will be reported for the SUMMiT process. Additionally, data from Van der Pauw test structures will be presented. Data on film thickness, film uniformity and critical dimensions of etched line widths are collected from both process and monitor wafers during manufacturing using film thickness metrology tools and SEM tools. A standardized diagnostic module is included in each SWiT run to obtain post-processing parametric data to monitor run-to-run reproducibility such as Van der Pauw structures for measuring sheet resistance. This characterization of the SUMMiT process enables design for manufacturability in the SUMMiT technology.

The characteristics of the ultrashort pulse laser (USPL, < 1 ps) ablation of biological tissues are investigated both theoretically and experimentally. Effective USPL parameters for minimal damage and high ablation rates are discussed.

A new test methodology is described which allows access to loading rates that lie between split Hopkinson bar and shock-loading techniques. Gas gun experiments combined with velocity interferometry techniques have been used to experimentally determine the intermediate strain-rate loading behavior of Coors AD995 alumina and Cercom silicon-carbide rods. Graded-density materials have been used as impactors; thereby eliminating the tension states generated by the radial stress components during the loading phase. Results of these experiments demonstrate that the time-dependent stress pulse generated during impact allows an efficient transition from the initial uniaxial strain loading to a uniaxial stress state as the stress pulse propagates through the rod. This allows access to intermediate loading rates over 5 x 10{sup 3}/s to a few times 10{sup 4}/s.

Waveguiding by total internal reflection is demonstrated within Al{sub x}Ga{sub 1{minus}x}As semiconductor heterostructures which have been fully oxidized in water vapor at {approximately}490 C. Refractive index, mode propagation constant, propagation loss ({le}3 cm{sup {minus}1}) at {lambda}=1.3 and 1.55 {micro}m, secondary ion mass spectrometry depth profile, and Fourier transform infrared transmission spectra measurements are presented to characterize a multimode single heterostructure oxide waveguide. An index contrast of {Delta}n=0.06 is observed between oxidized x=0.4 and x=0.8 Al{sub x}Ga{sub 1{minus}x}As oxide layers. Absorption loss at 1.55 {micro}m is observed due to OH groups. Near-field images are presented showing waveguiding in a single-mode oxide double heterostructure.

The implementation of a backscattered x-ray landmine detection system has been demonstrated in laboratories at both Sandia National Laboratories (SNL) and the University of Florida (UF) The next step was to evaluate the modality by assembling a system for fieldwork and to evaluate the systems performance with real landmines. To assess the system's response to a variety of objects, buried simulated plastic and metal antitank landmines, surface simulated plastic antipersonnel landmines, and surface metal fragments were used as targets for the field test. The location of the test site was an unprepared field at SNL. The tests conducted using real landmines were held at UF using various burial depths. The field tests yielded the same levels of discrimination between soil and landmines that had been detected in laboratory experiments. The tests on the real landmines showed that the simulated landmines were a good approximation. The real landmines also contained internal features that would allow not only the detection of the landmines, but also the identification of them.

Using the CRYRing Facility in Stockholm Coupled with an MCP-CCD detector, and a differential stopping foil, we have determined dynamic parameters in the three-body dissociative recombination of H₂O⁺. These include the distribution between the O(³P) and O(¹D) channels, the distribution of H atom recoil energies in the O(³P) channel and the distribution of angles between the two departing H atoms.

This paper examines the correlation between mechanical properties and the density, phase, and hydrogen content of deposited alumina layers, and compares them to those of sapphire and amorphous alumina synthesized through ion-beam irradiation of sapphire. Alumina films were deposited using electron beam evaporation of aluminum and co-bombardment with O{sub 2}{sup +} ions (30-230 eV) from an electron cyclotron resonance (ECR) plasma. The H content and phase were controlled by varying the deposition temperature and the ion energy. Sapphire was amorphized at 84 K by irradiation with Al and O ions (in stoichiometric ratio) to a defect level of 4 dpa in order to form an amorphous layer 370 nm thick. Nanoindentation was performed to determine the elastic modulus, yield strength and hardness of all materials. Sapphire and amorphized sapphire have a higher density and exhibit superior mechanical properties in comparison to the deposited alumina films. Density was determined to be the primary factor affecting the mechanical properties, which showed only a weak correlation to the hydrogen content.

A computational procedure for extracting substructure-by-substructure flexibility properties from global modal parameters is presented. The present procedure consists of two key features: an element-based direct flexibility method which uniquely determines the global flexibility without resorting to case-dependent redundancy selections; and, the projection of cinematically inadmissible modes that are contained in the iterated substructural matrices. The direct flexibility method is used as the basis of an inverse problem, whose goal is to determine substructural flexibilities given the global flexibility, geometrically-determined substructural rigid-body modes, and the local-to-global assembly operators. The resulting procedure, given accurate global flexibility, extracts the exact element-by-element substructural flexibilities for determinate structures. For indeterminate structures, the accuracy depends on the iteration tolerance limits. The procedure is illustrated using both simple and complex numerical examples, and appears to be effective for structural applications such as damage localization and finite element model reconciliation.

We have investigated the performance of a position-sensitive, gamma-ray detector based on a CsI(Na) scintillator coupled to a Hamamatsu R3292 Position-Sensitive Photomultiplier Tube (PSPMT). The R3292 has an active area 10.0 cm in diameter (quoted). Utilization of the full active area of the photocathode is a goal that has been previously unrealized due to edge effects. Initial measurements with a 0.75 cm thick CsI(Na) crystal indicate that the performance (position resolution linearity) starts to degrade as one reaches a radius of only 3.5 cm, reducing the active area by 60%. Measuring the anode wires we have found that this fall off is not solely due to crystal edge effects, but rather is inherent to the tube crystal system. In this paper we describe the results of our measurements and how good performance can be maintained across a full 10cm of the tube face through the use of a few additional electronics channels.

The fourth international LTE opacity workshop and code comparison study, WorkOp-IV, was held in Madrid in 1997. Results of this workshop are summarized with a focus on iron opacities. In particular, the astrophysically important photon absorption region between 50 and 80 eV is emphasized for a sequence of iron plasmas at densities and temperatures that produce nearly the same average ionization stage (Z* {approximately} 8.6). Experimental data that addressed this spectral region is also reviewed.

Extending early work, we formulate the large N matrix mechanics of general bosonic, fermionic and supersymmetric matrix models, including Matrix theory: The Hamiltonian framework of large N matrix mechanics provides a natural setting in which to study the algebras of the large N limit, including (reduced) Lie algebras, (reduced) supersymmetry algebras and free algebras. We find in particular a broad array of new free algebras which we call symmetric Cuntz algebras, interacting symmetric Cuntz algebras, symmetric Bose/Fermi/Cuntz algebras and symmetric Cuntz superalgebras, and we discuss the role of these algebras in solving the large N theory. Most important, the interacting Cuntz algebras are associated to a set of new (hidden!) local quantities which are generically conserved only at large N. A number of other new large N phenomena are also observed, including the intrinsic nonlocality of the (reduced) trace class operators of the theory and a closely related large N field identification phenomenon which is associated to another set (this time nonlocal) of new conserved quantities at large N.

Tainter, F.H., and J.W. McMinn. 1999. Early deterioration of coarse woody debris. In: Proc. Tenth Bien. South. Silv. Res. Conf. Shreveport, LA, February 16-18, 1999. Pp. 232-237 Abstract - Coarse woody debris (CWD) is an important structural component of southern forest ecosystems. CWD loading may be affected by different decomposition rates on sites of varying quality. Bolts of red oak and loblolly pine were placed on plots at each of three (hydric, mesic. and xerlc) sites at the Savannah River Site and sampled over a I6-week period. Major changes were in moisture content and nonstructural carbohydrate content (total carbohydrates, reducing sugars, and starch) of sapwood. Early changes in nonstructural carbohydrate levels following placement of the bolts were likely due to reallocation of these materials by sapwood parenchyma cells. These carbohydrates later formed pools increasingly metabolized by bacteria and invading fungi. Most prevalent fungi in sapwood were Ceratocysfis spp. in pine and Hypoxy/on spp. in oak. Although pine sapwood became blue stained and oak sapwood exhibited yellow soft decay with black zone lines, estimators of decay (specific gravity, sodium hydroxide solubility, and holocellulose content) were unchanged during the 16-week study period. A small effect of site was detected for starch content …

We have detected 90 objects with periods and lightcurve structure similar to those of field {delta} Scuti stars, using the Massive Compact Halo Object (MACHO) Project database of Galactic bulge photometry. If we assume similar extinction values for all candidates and absolute magnitudes similar to those of other field high-amplitude {delta} Scuti stars (HADS), the majority of these objects lie in or near the Galactic bulge. At least two of these objects are likely foreground {delta} Scuti stars, one of which may be an evolved nonradial pulsator, similar to other evolved, disk-population {delta} Scuti stars. We have analyzed the light curves of these objects and find that they are similar to the light curves of field {delta} Scuti stars and the {delta} Scuti stars found by the Optical Gravitational Lens Experiment (OGLE). However, the amplitude distribution of these sources lies between those of low- and high-amplitude {delta} Scuti stars, which suggests that they may be an intermediate population. We have found nine double-mode HADS with frequency ratios ranging from 0.75 to 0.79, four probable double- and multiple-mode objects, and another four objects with marginal detections of secondary modes. The low frequencies (5-14 cycles d{sup -1}) and the observed period ratios …

Lawrence Livermore National Laboratory is implementing an Integrated Safety Management System (ISMS) to assure that all environment, safety, and health (ES&H) requirements and practices are integrated into work planning, execution, and feedback. A major component to ISMS is the rewriting of the Laboratory's ES&H documentation to meet federal, state, and local requirements and standards. Previously, the Laboratory's operations documentation was paper-based and decentralized; updates were time-consuming and expensive to produce and distribute. The immediate goal for the ISMS project team was the development of a virtual, Web-based manual that provides current, consistent information easily accessible to users. Future updates to this virtual manual will be faster, less expensive, and immediately available.

This paper describes the design and performance of flashlamp-pumped, Nd:glass. Brewster-angle slab amplifiers intended to be deployed in the National Ignition Facility (NIF). To verify performance, we tested a full-size, three-slab-long, NIF prototype amplifier, which we believe to be the largest flashlamp-pumped Nd:glass amplifier ever assembled. Like the NIF amplifier design, this prototype amplifier had eight 40-cm-square apertures combined in a four-aperture-high by two-aperture-wide matrix. Specially-shaped reflectors, anti-reflective coatings on the blastshields, and preionized flashlamps were used to increase storage efficiency. Cooling gas was flowed over the flashlamps to remove waste pump heat and to accelerate thermal wavefront recovery. The prototype gain results are consistent with model predictions and provide high confidence in the final engineering design of the NIF amplifiers. Although the dimensions, internal positions, and shapes of the components in the NIF amplifiers will be slightly different from the prototype, these differences are small and should produce only slight differences in amplifier performance

This paper provides a brief review of experimental techniques for producing dynamic isentropic compression of samples to pressures of several hundred GPa. Traditional gun launch techniques include use of buffer plates, such as fused silica, that exhibit negative curvature to their stress-strain response and graded-density impactors. Graded-density impactors have been used to study isentropic compression of specimens to pressures exceeding 2 Mbar on high-impedance materials. A recent development includes the use of the Sandia Z Accelerator to produce magnetic compression in planar specimens to pressures of a few hundred kbar over time scales of 100 ns. These techniques have been successfully applied to isentropic compression of iron to 300 kbar and copper to 130 kbar. The iron results indicate that it is possible to study the polymorphic phase change that occurs at 130 kbar and also the kinetic properties of the transformation. The copper results indicate that with further improvements in progress it should be possible to measure continuous isentropic compression curves in materials of interest to pressures exceeding 1 Mbar. The Z accelerator is limited to peak currents of about 20 MA. By reconfiguring the anode-cathode geometry it should be possible to obtain constant current density and thus driving …

Over the past two years extensive experimentation has been carded out to determine the nature of bulk damage in KDP. Automated damage testing with small beams has made it possible to rapidly investigate damage statistics and its connection to growth parameter Variation. Over this time we have built up an encyclopedia of many damage curves but only relatively few samples have been tested with large beams. The scarcity of data makes it difficult to estimate how future crystals will perform on the NIF, and the campaign nature of large beam testing is not suitable for efficient testing of many samples with rapid turn-around, it is therefore desirable to have analytical tools in place that could make reliable predictions of large-beam performance based on small-beam damage probability measurements. To that end, we discuss the application of exponential and power law damage evolution within the framework of Poisson statistics in this memo. We describe the results of fitting these models to various damage probability curves on KDP including the heavily investigated KDP214 samples. We find that both models are capable of fitting the damage probability S-curves quite well but there are multiple parameter sets for each model that produce comparable {chi}{sup 2} …

Hohlraums (measuring 6-mm in diameter by 7-mm in height) have been heated by x-rays from a z-pinch. Over measured x-ray input powers P of 0.7 to 13 TW, the hohlraum radiation temperature T increases from {approximately}55 to {approximately}130 eV, and is in agreement with the Planckian relation P-T{sup 4}. The results suggest that indirect-drive ICF studies involving NIF relevant pulse shapes and <2-mm diameter capsules can he studied using this arrangement.