Laser spot welding is an ideal process for joining small parts with tight tolerances on weld size, location, and distortion, particularly those with near-by heat sensitive features. It is also key to understanding the overlapping laser spot seam welding process. Rather than attempting to simulate the laser beam-to-part coupling (particularly if a keyhole occurs), it was measured by calorimetry. This data was then used to calculate the thermal and structural response of a laser spot welded SS304 disk using the finite element method. Five combinations of process parameter values were studied. Calculations were compared to experimental data for temperature and distortion profiles measured by thermocouples and surface profiling. Results are discussed in terms of experimental and modeling factors. The authors then suggest appropriate parameters for laser spot welding.

With the increasing availability of wind power worldwide, power fluctuations have become a concern for some utilities. Under electric industry restructuring in the US, the impact of these fluctuations will be evaluated by examining provisions and costs of ancillary services for wind power. This paper analyzes wind power in the context of ancillary services, using data from a German 250 Megawatt Wind project.

None

Approximately 2,300 metric tons Spent Nuclear Fuel (SNF) are currently stored within two water filled pools, the 105 K East (KE) fuel storage basin and the 105 K West (KW) fuel storage basin, at the U.S. Department of Energy, Richland Operations Office (RL). The SNF Project is responsible for operation of the K Basins and for the materials within them. A subproject to the SNF Project is the Debris Removal Subproject, which is responsible for removal of empty canisters and lids from the basins. Design criteria for a Canister Cleaning System to be installed in the KW Basin. This documents the requirements for design and installation of the system.

Collections of human DNA fragments are maintained for research purposes as clones in bacterial host cells. However for unknown reasons, some regions of the human genome appear to be unclonable or unstable in bacteria. Their team has developed a system using episomes (extrachromosomal, autonomously replication DNA) that maintains large DNA fragments in human cells. This human artificial episomal chromosomal (HAEC) system may prove useful for coverage of these especially difficult regions. In the broader biomedical community, the HAEC system also shows promise for use in functional genomics and gene therapy. Recent improvements to the HAEC system and its application to mapping, sequencing, and functionally studying human and mouse DNA are summarized. Mapping and sequencing the human genome and model organisms are only the first steps in determining the function of various genetic units critical for gene regulation, DNA replication, chromatin packaging, chromosomal stability, and chromatid segregation. Such studies will require the ability to transfer and manipulate entire functional units into mammalian cells.

A MEMS test structure capable of measuring friction between polysilicon surfaces under a variety of test conditions has been refined from previous designs. The device is applied here to measuring friction coefficients of polysilicon surfaces under different environmental, loading, and surface conditions. Two methods for qualitatively comparing friction coefficients ({mu}) using the device are presented. Samples that have been coated with a self-assembled monolayer of the lubricating film perfluorinated-decyltrichorosilane (PFTS) have a coefficient of friction that is approximately one-half that of samples dried using super-critical CO{sub 2} (SCCO{sub 2}) drying. Qualitative results indicate that {mu} is independent of normal pressure. Wear is shown to increase {mu} for both supercritically dried samples and PFTS coated samples, though the mechanisms appear to be different. Super critically dried surfaces appear to degrade continuously with increased wear cycles, while PFTS coated samples reach a steady state friction value after about 10{sup 4} cycles.

The authors have investigated LiNi{sub 0.8}Co{sub 0.2}O{sub 2} (Sumitomo) and LiNi{sub 5/8}Co{sub 1/4}Mn{sub 1/16}Al{sub 1/16}O{sub 2} (Sandia chemical preparation method) cathode powders via in-situ X-ray Diffraction and Cyclic Voltammetry using a coffee-bag type electrochemical cell. Both cathode materials did not show a monoclinic distortion during de-intercalation but sustained the hexagonal structure up to 4.3 V. The doping of Co into the LiNiO{sub 2} structure appears to stabilize this lattice as the hexagonal structure over the full range of charging (up to 4.3 V). The LiNi{sub 5/8}Co{sub 1/4}Mn{sub 1/16}Al{sub 1/16}O{sub 2} cathode material exhibited a 160 mAh/g capacity (to 4.1 V) on its 1{sup st} cycle, while displaying a much smaller volume change (as compared to LiNi{sub 0.8}Co{sub 0.2}O{sub 2}) during de-intercalation. This reduced overall volume change (2.5 vol%) may have important implications for cycle life of this material.

None

Evaporation is a classical physics problem which, because of its significant importance for many engineering applications, has drawn considerable attention by previous researchers. Classical theoretical models [Ta. I. Frenkel, Kinetic Theory of Liquids, Clarendon Press, Oxford, 1946] represent evaporation in a simplistic way as the escape of atoms with highest velocities from a potential well with the depth determined by the atomic binding energy. The processes taking place in the gas phase above the rapidly evaporating surface have also been studied in great detail [S.I.Anisimov and V. A. Khokhlov, Instabilities in Lasser-Matter Interaction, CRC Press, Boca Raton, 1995]. The description of evaporation utilizing these models is known to adequately characterize drilling with high beam intensity, e.g., >10{sup 7} W/cm{sup 2}. However, the interaction regimes when beam intensity is relatively low, such as during welding or cutting, lack both theoretical and experimental consideration of the evaporation. It was shown recently that if the evaporation is treated in accordance with Anisimov et.al.'s approach, then predicted evaporation recoil should be a substantial factor influencing melt flow and related heat transfer during laser beam welding and cutting. To verify the applicability of this model for low beam intensity interaction, the authors compared the results …

This memo explores the assumptions in Mark P. Mills' report titled 'The Internet Begins with Coal' that relate to current electricity use 'associated with the Internet'. We find that Mills has significantly overestimated electricity use, in some cases by more than an order of magnitude. We adjust his estimates to reflect measured data and more accurate assumptions, which reduces Mills' overall estimate of total Internet-related electricity use by about a factor of eight.

Selectively oxidized vertical cavity surface emitting lasers (VCSELS) have been studied by spectrally resolved near field scanning optical microscopy (NSOM). We have obtained spatially and spectrally resolved images of both subthreshold emission and lasing emission from a selectively oxidized VCSEL operating at a wavelength of 850 nm. Below threshold, highly local high gain regions, emitting local intensity maxima within the active area, were observed; these were found to serve as lasing centers just above threshold. Above threshold, the near field spatial modal distributions of low order transverse modes were identified by spectrally analyzing the emission; these were found to be complex and significantly different from those measured in the far field.

The primary research objective of the Numerical Tokamak Turbulence Project (NTTP) is to develop a predictive ability in modeling turbulent transport due to drift-type instabilities in the core of tokamak fusion experiments, through the use of three-dimensional kinetic and fluid simulations and the derivation of reduced models.

A key step in the construction of high consequence software is its specification in a formal framework. In order to minimize the difficulty and potential for error, a specification should be expressed in a domain language supporting operators and structures that are intrinsic to the class of algorithms one wishes to specify. In this paper the authors describe a language that is suitable for the algorithmic specification of software controllers for a class of reactive systems of which the Bay Area Rapid Transit (BART) system is an instance. The authors then specify an abstract controller for a subset of BART using this language.

This calculation note documents the probabilistic calculation of a potential drop of a multi-canister overpack (MCO) cask or MCO cask and immersion pail at the K West Basin south loadout pit. The calculations are in support of the cask loading system (CLS) subproject alignment of CLS equipment in the K West Basin south loadout pit.

The purpose of this paper is to demonstrate how transformation can be used to derive a high integrity implementation of a train controller from an algorithmic specification. The paper begins with a general discussion of high consequence systems (e.g., software systems) and describes how rewrite-based transformation systems can be used in the development of such systems. The authors then discuss how such transformations can be used to derive a high assurance controller for the Bay Area Rapid Transit (BART) system from an algorithmic specification.

In this lecture I give a pedagogical introduction to the Perturbative QCD to understand the short-distance dynamics of the strong interaction. Starting with fundamental concepts such as the color degree of freedom of QCD, non-abelian gauge field theory, renormalization group equation etc., I explain a basic idea of the perturbative QCD and apply this idea to the e{sup +}e{sup {minus}} processes and the structure functions. The notion of mass singularity and the necessity of its factorization is discussed in some detail.

Silicon (Si) has a strength to density ratio of 3.0({sigma}{sub y}/{delta}=(6.8GPa/2.3g/cc)), an order-of-magnitude higher than titanium, aluminum, or stainless steel. Silicon also demonstrates favorable thermal, optical, and electrical properties making it ideal for use as a structural foundation for autonomous, mesoscopic systems such as nanosatellites. Using Si substrates, a structure that can simultaneously act as a thermal management system, a radiation shield, an optical material, a package, and a semiconductor substrate can be realized.

Finite difference methods for solving the wave equation more accurately capture the physics of waves propagating through the earth than asymptotic solution methods. Unfortunately. finite difference simulations for 3D elastic wave propagation are expensive. We model waves in a 3D isotropic elastic earth. The wave equation solution consists of three velocity components and six stresses. The partial derivatives are discretized using 2nd-order in time and 4th-order in space staggered finite difference operators. Staggered schemes allow one to obtain additional accuracy (via centered finite differences) without requiring additional storage. The serial code is most unique in its ability to model a number of different types of seismic sources. The parallel implementation uses the MP1 library, thus allowing for portability between platforms. Spatial parallelism provides a highly efficient strategy for parallelizing finite difference simulations. In this implementation, one can decompose the global problem domain into one-, two-, and three-dimensional processor decompositions with 3D decompositions generally producing the best parallel speed up. Because i/o is handled largely outside of the time-step loop (the most expensive part of the simulation) we have opted for straight-forward broadcast and reduce operations to handle i/o. The majority of the communication in the code consists of passing subdomain …

This document is the format IV, final report for the tank 241-AP-103 (AP-103) grab samples taken in August 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-103 samples were performed as directed in ''Compatibility Grub Sampling and Analysis Plan for Fiscal Year 1999'' (Sasaki 1999a). Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. No notification limits were exceeded.

None

This document updates the Version Description Document with the changes incorporated in the Revision 11.1 software installation on the Tank Monitor and Control System (TMACS).

A Grapple Hoist Assembly is currently used on the Rotary Mode Core Sampling Trucks (RMCSTs) to actuate the sampler and retrieve the pintle rod during sampling operations. The hoist assembly includes a driven drum approximately two inches wide and six inches in diameter that rotates to pay out or reel in the 5/32-in. cable The current Grapple Hoist Assembly, detailed on drawing H-2-690057, is prone to ''bird nesting'' the cable on the drum. ''Bird nesting'' is a condition in which the cable does not wind onto the drum in a uniformly layered manner, but winds in a random fashion where the cable essentially ''piles up'' inappropriately on the drum and, on some occasions, winds on the drum drive shaft. A system to help control this ''bird nesting'' problem has been designed as an addition to the existing components of the Grapple Hoist Assembly. The new design consists of a mechanism that is timed with, and driven by, the shaft that drives the drum. This mechanism traverses back and forth across the width of the drum to lay the cable on the drum in a uniformly layered manner. This test plan establishes the acceptance criteria, test procedure and test conditions It …

The authors present a summary of recent measurements utilizing top quark candidate events extracted from approximately 110 pb{sup -1} of p{bar p} data collected by the CDF and D0 experiments at the Tevatron collider. They report on a new combined Tevatron top quark mass of 174.3 {+-} 5.1 GeV/c{sup 2} which takes into account five separate measurements made by the two experiments. They also demonstrate how the techniques developed for the mass analysis have been applied to further studies of the top quark and the t{bar t} system.

Prototype current leads incorporating High Temperature Superconductor (HTS) elements have been tested at Fermilab. Fermilab's Tevatron includes about 50 pair of 5 to 6 kA current leads, and Fermilab is investigating the feasibility of replacing some of these conventional leads with HTS leads. The prototype HTS current leads are cooled primarily by a countercurrent flow of liquid nitrogen from the 80 K intercept to the warm end of the leads, but also a small flow of helium gas cools the HTS section from the 4 K level. The HTS current leads carried the design current of 5 kA with good thermal and electrical stability. LN2 flow without current was 0.24 g/set per lead and with 5 kA was 0.53 g/set per lead, corresponding to heat inflows to the 80 K intercept of 46 Watts and 101 Watts, respectively. The heat input to the 4 K level was 0.6 W with no current and 0.7 W +/- 0.1 W per lead with 5 kA current, about 1/8 of the heat load via copper, vapor-cooled leads.