This design-only conceptual design report was prepared to support a funding request by the Department of Energy Office of Fissile Materials Disposition for engineering and design of the Plutonium Immobilization Plant, which will be used to immobilize up to 50 tonnes of surplus plutonium. The siting for the Plutonium Immobilization Plant will be determined pursuant to the site-specific Surplus Plutonium Disposition Environmental Impact Statement in a Plutonium Deposition Record of Decision in early 1999. This document reflects a new facility using the preferred technology (ceramic immobilization using the can-in-canister approach) and the preferred site (at Savannah River). The Plutonium Immobilization Plant accepts plutonium from pit conversion and from non-pit sources and, through a ceramic immobilization process, converts the plutonium into mineral-like forms that are subsequently encapsulated within a large canister of high-level waste glass. The final immobilized product must make the plutonium as inherently unattractive and inaccessible for use in nuclear weapons as the plutonium in spent fuel from commercial reactors and must be suitable for geologic disposal. Plutonium immobilization at the Savannah River Site uses: (1) A new building, the Plutonium Immobilization Plant, which will convert non-pit surplus plutonium to an oxide form suitable for the immobilization process, immobilize …

The development of a biological monitoring plan for the receiving streams of the Paducah Gaseous Diffusion Plant (PGDP) began in the late 1980s, because of an Agreed Order (AO) issued in September 1987 by the Kentucky Division of Water (KDOW). Five years later, in September 1992, more stringent effluent limitations were imposed upon the PGDP operations when the KDOW reissued Kentucky Pollutant Discharge Elimination System permit No. KY 0004049. This action prompted the US Department of Energy (DOE) to request a stay of certain limits contained in the permit. An AO is being negotiated between KDOW, the United States Enrichment Corporation (USEC), and DOE that will require that several studies be conducted, including this stream temperature evaluation study, in an effort to establish permit limitations. All issues associated with this AO have been resolved, and the AO is currently being signed by all parties involved. The proposed effluent temperature limit is 89 F (31.7C) as a mean monthly temperature. In the interim, temperatures are not to exceed 95 F (35 C) as a monthly mean or 100 F (37.8 C) as a daily maximum. This study includes detailed monitoring of instream temperatures, benthic macroinvertebrate communities, fish communities, and a laboratory …

The division was formed in 1946 at the suggestion of Dr. Eugene P. Wigner to attack the problem of the distortion of graphite in the early reactors due to exposure to reactor neutrons, and the consequent radiation damage. It was called the Metallurgy Division and assembled the metallurgical and solid state physics activities of the time which were not directly related to nuclear weapons production. William A. Johnson, a Westinghouse employee, was named Division Director in 1946. In 1949 he was replaced by John H Frye Jr. when the Division consisted of 45 people. He was director during most of what is called the Reactor Project Years until 1973 and his retirement. During this period the Division evolved into three organizational areas: basic research, applied research in nuclear reactor materials, and reactor programs directly related to a specific reactor(s) being designed or built. The Division (Metals and Ceramics) consisted of 204 staff members in 1973 when James R. Weir, Jr., became Director. This was the period of the oil embargo, the formation of the Energy Research and Development Administration (ERDA) by combining the Atomic Energy Commission (AEC) with the Office of Coal Research, and subsequent formation of the Department of …

The purpose of this one-year investigation is to perform a technology integration/search, thereby ensuring that the safest and most cost-effective options are developed and subsequently used during the deactivation and decommissioning (D&D) of U.S. Department of Energy Environmental Management (DOE-EM) sites. Issues of worker health and safety are the main concern, followed by cost. Two lines of action were explored: innovative Personal Cooling Systems (PCS) and Personal Monitoring Equipment (PME). PME refers to sensors affixed to the worker that warn of an approaching heat stress condition, thereby preventing it. Three types of cooling systems were investigated: Pre-Chilled or Forced-Air System (PCFA), Umbilical Fluid-Chilled System (UFCS), and Passive Vest System (PVS). Of these, the UFCS leads the way. The PVS or Gel pack vest lagged due to a limited cooling duration. And the PCFA or chilled liquid air supply was cumbersome and required an expensive and complex recharge system. The UFCS in the form of the Personal Ice Cooling System (PICS) performed exceptionally. The technology uses a chilled liquid circulating undergarment and a Personal Protective Equipment (PPE) external pump and ice reservoir. The system is moderately expensive, but the recharge is low-tech and inexpensive enough to offset the cost. There are …

We have been developing the optical components for a source-routed wavelength division multiplexed (WDM) computer interconnect fabric that uses multi-mode fiber ribbon cable as the transmission medium. We are developing wavelength selectable VCSEL transmitters, interference filters, and a compact broadcast element. Here we report on key results from our interference filter development activities. Our WDM filter approach is based upon post-market machining of the commercially available molded plastic �MT� fiber ribbon connector. We use III-IV semiconductors grown by MBE or MOCVD as the filter materials. The high indices of our thin film materials enable us to use multimode fiber and maintain narrow passbands without the need for micro-optics. We have fabricated both 2-port and 3-port devices based upon this approach. Our current work focuses on 2-port WDM filters suitable for a broadcast and select architecture. Our single-cavity Fabry- Perot (FP) filters have demonstrated insertion losses of < 2 dB for 4 nm passbands. The maximum crosstalk suppression for the single-cavity FP filters is 18dB To improve crosstalk suppression beyond that attainable with the Lorentzian lineshapes of the single-cavity FP we have investigated some multiple-cavity Fabry-Perot (MC-FP) designs which have a spectral response with a flatter top and sharper passband edges. …

Streamflow data are more useful for evaluating hydrologic model results and studying water quality once baseflow and storm runoff have been separated. However, it is important to select an appropriate hydrograph separation method. They examined tow methods and evaluated their conceptual basis, ease of application, cost of data processing, and acceptability of results. they chose the quick flow hydrograph separation method, which is in use at the Coweeta Hydrologic Laboratory, because it gives acceptable results and is easy and inexpensive to use. For regional assessment, they anticipate that the Coweeta program will be useful as an aid in developing general quantitative relationships between changes in land use and the associated changes in surface runoff yield and water quality degradation.

Weekly newspaper from Dallas, Texas that includes local, state, and national news and advertising of interest to the Lesbian, Gay, Bisexual, and Transgender (LGBT) community.

Student newspaper of Weatherford High School in Weatherford, Texas that includes school news and information along with advertising.

Monthly newspaper from Corpus Christi, Texas published by the Diocese of Corpus Christi that includes news of interest to Diocese members along with advertising.

Pretreatment of liquid high-level radioactive waste at the West Valley Demonstration Project (WVDP) was essential to ensuring the success of high-level waste (HLW) vitrification. By chemically separating the HLW from liquid waste, it was possible to achieve a significant reduction in the volume of HLW to be vitrified. In addition, pretreatment made it possible to remove sulfates, which posed several processing problems, from the HLW before vitrification took place.

Weekly newspaper from Grandview, Texas that includes local, state, and national news along with advertising.

Photograph of Margaret Cho visiting UNT in 1999. Cho can be seen sitting at a table in the center of the photograph, facing to the left of the camera. She is sticking her tongue out and smiling. Two men can be seen next to Cho, one on either side. They are both smiling. Cho is holding hands with one of the men.

Semiweekly newspaper from Sealy, Texas that includes local, state, and national news along with advertising.

Newsletter of Congregation Beth Israel in Houston, including news and events, upcoming services, member announcements, editorials, and other information of interest to congregants.

The goal of this project was to utilize a novel device design to build a compact, high resolution, room temperature operated semiconductor gamma ray sensor. This sensor was constructed from a cadmium zinc telluride (CZT) crystal. It was able to both detect total radiation intensity and perform spectroscopy on the detected radiation. CZT detectors produced today have excellent electron charge carrier collection, but suffer from poor hole collection. For conventional gamma-ray spectrometers, both the electrons and holes must be collected with high efficiency to preserve energy resolution. The requirement to collect the hole carriers, which have relatively low lifetimes, limits the efficiency and performance of existing experimental devices. By implementing novel device designs such that the devices rely only on the electron signal for energy information, the sensitivity of the sensors for detecting radiation can be increased substantially. In this report the authors describe a project to develop a new type of electron-only CZT detector. They report on their successful efforts to design, implement and test these new radiation detectors. In addition to the design and construction of the sensors the authors also report, in considerable detail, on the electrical characteristics of the CZT crystals used to make their detectors.

Weekly newspaper from The Colony, Texas that includes local, state, and national news along with advertising.