The objective of this study was to define areas of previous disturbance in the 300 Area of the U.S. Department of Energy (DOE) Hanford Site to eliminate these areas from the cultural resource review process, reduce cultural resource monitoring costs, and allow cultural resource specialists to focus on areas where subsurface disturbance is minimal or nonexistent. Research into available sources suggests that impacts from excavations have been significant wherever the following construction activities have occurred: building basements and pits, waste ponds, burial grounds, trenches, installation of subsurface pipelines, power poles, water hydrants, and well construction. Beyond the areas just mentioned, substrates in the' 300 Area consist of a complex, multidimen- sional mosaic composed of undisturbed stratigraphy, backfill, and disturbed sediments; Four Geographic Information System (GIS) maps were created to display known areas of disturbance in the 300 Area. These maps contain information gleaned from a variety of sources, but the primary sources include the Hanford GIS database system, engineer drawings, and historic maps. In addition to these maps, several assumptions can be made about areas of disturbance in the 300 Area as a result of this study: o o Buried pipelines are not always located where they are mapped. As …

For the past several years studies have been conducted to investigate the use of innovative, alternative approaches to conventional disposable high efficiency particulate air filters.

This report summarizes work fimded jointly by the U.S. Department of Energy (DOE) and by the Gas Research Institute (GRI) to (1) identi& barriers to establishing sustainable natural gas vehicle (NGV) infrastructure and (2) develop planning information that can help to promote a NGV infrastructure with self-sustaining critical maw. The need for this work is driven by the realization that demand for NGVS has not yet developed to a level that provides sufficient incentives for investment by the commercial sector in all necessary elements of a supportive infrastructure. The two major objectives of this project were: (1) to identifi and prioritize the technical barriers that may be impeding growth of a national NGV infrastructure and (2) to develop input that can assist industry in overcoming these barriers. The approach used in this project incorporated and built upon the accumulated insights of the NGV industry. The project was conducted in three basic phases: (1) review of the current situation, (2) prioritization of technical infrastructure btiiers, and (3) development of plans to overcome key barriers. An extensive and diverse list of barriers was obtained from direct meetings and telephone conferences with sixteen industry NGV leaders and seven Clean Cities/Clean Corridors coordinators. This …

The minor isotope 232U may ultimately be used for detection or confirmation of uranium in a variety of applications. The primary advantage of 232 U as an indicator of the presence of enriched uranium is the plentiful and penetrating nature of the radiation emitted by its daughter radionuclide 208Tl. A possible drawback to measuring uranium via 232U is the relatively high uncertainty in 232U abundance both within and between material populations. An important step in assessing this problem is to ascertain what determines the 232U concentration within any particular sample of uranium. To this end, we here analyze the production and eventual enrichment of 232 U during fuel-cycle operations. The goal of this analysis is to allow approximate prediction of 232 U quantities, or at least some interpretation of the results of 232U measurements. We have found that 232U is produced via a number of pathways during reactor irradiation of uranium and is subsequently concentrated during the later enrichment of the uranium' s 235U Content. While exact calculations are nearly impossible for both the reactor-production and cascade-enrichment parts of the prediction problem, estimates and physical bounds can be provided as listed below and detailed within the body of the report. …

Hanford publishes extensive estimates of their offsite releases of various chemical and radiological species annuaIly. In this report we examine using these estimates to develop additional insight into how effectively such releases of hazardous materials are being controlled at Hanford. Historical estimates of airborne and surface water releases of selected contaminants are compared with estimates of the overall Site inventory of those contaminants and with the corresponding release limits and background levels. These comparisons are also examined over a five-year period (1993 to 1997) to determine how these releases have changed during that time. Most of the waste management and environmental restoration activities under way at Hanford are intended to provide final, permanent disposition of the Site's inventory of hazardous materials, with the ultimate objective of ensuring that risks to the public and the environment are controlled to an acceptable level. An important consideration during the conduct of these activities is prott%ting the public and the environment while accomplishing the longer-term ~~ objectives. The amounts of hazardous materials that are being released to the air or surface water while waste management and environmental activities are being conducted is one important measure of their overall effectiveness. The comparisons described in this …

A lifting fixture (drawing number 3823.113-MD-372382) that lifts large steel mandrels from one end through the mandrel's end support web is described. The mandrels are used as a mold to form carbon fiber cylinders. The mandrels are held from one end to allow the carbon cylinder to be pulled horizontally off the mandrel. Only mandrels as described in drawing numbers 3823.113-MD-358992 and 3823.1 13-MD-358994 are lifted by the fixture. The largest mandrel is 41 inches in diameter, 120 inches long, and weighs approximately 3,000 lbs. A detailed procedure for removing the carbon cylinder from the steel mandrel is given in the Appendix. The fixture is to be supported only using Fermilab Forklift 10207 or equivalent. The forklift has a nameplate capacity of 12,000 lbs 24 inches from the mast at an elevation of 130 inches from the floor. The forklift forks must be removed from the truck prior to using the fixture. The forklift is to be used to support the mandrels only during the lifting operation and is not to be used to transport the mandrels. Stresses at the lifting fixture are shear stresses on the support brackets due to the overall weight of the mandrel and moment loads …

Fusion chambers and high pulse-rate target systems for inertial fusion energy (IFE) must: regenerate chamber conditions suitable for target injection, laser propagation, and ignition at rates of 5 to 10 Hz; extract fusion energy at temperatures high enough for efficient conversion to electricity; breed tritium and fuel targets with minimum tritium inventory; manufacture targets at low cost; inject those targets with sufficient accuracy for high energy gain; assure adequate lifetime of the chamber and beam interface (final optics); minimize radioactive waste levels and annual volumes; and minimize radiation releases under normal operating and accident conditions. The primary goal of the US IFE program over the next four years (Phase I) is to develop the basis for a Proof-of-Performance-level driver and target chamber called the Integrated Research Experiment (IRE). The IRE will explore beam transport and focusing through prototypical chamber environment and will intercept surrogate targets at high pulse rep-rate. The IRE will not have enough driver energy to ignite targets, and it will be a non-nuclear facility. IRE options are being developed for both heavy ion and laser driven IFE. Fig. 1 shows that Phase I is prerequisite to an IRE, and the IRE plus NIF (Phase II) is prerequisite …

None

The 3 km long linac at the Stanford Linear Accelerator Center (SLAC) is used for fixed target experiments such as E-155, with energies up to 50 GeV. The SLAC Energy Development (SLED) system increase the maximum no-load energy by a factor of 1.6, but it also causes a varying beam energy curve. To provide a long pulse or bunch train for the experiment the energy profile has to be flat. Besides more sophisticated methods such as varying the phase of two klystrons feeding one structure section as proposed in the NLC design, we describe the method used for E-155 in spring of 1997. The desired low charged beam didn't have any significant beam loading, but by inserting a 180{degree} phase notch during the SLED pulse, a beam pulse of up to 500 ns was achieved. The energy range without compensation would have been 15%, while with compensation the energy spread was reduced to about 0.15%. The phase notch was achieved by triggering a pair of two additional 180{degree} phase switches about half a structure fill-time after the SLED pulse was triggered. Simulations are compared with the experimental result.

The linac at the Stanford Linear Accelerator Center (SLAC) can provide beams to different experiments during PEP-II operations. It is planned to have a 30-GeV beam to the end of the linac into the FFTB (Final Focus Test Beam) area, where there will be two plasma experiments installed. They will demonstrate plasma focusing and plasma acceleration up to 1 GeV/m. The acceleration goes linear with the current and is inversely proportional to the square of the bunch length. These high charge, short bunches will create strong longitudinal wakefields in the linac. They create a strong double-horned energy profile and have different beam dynamics in the linac. Therefore we made a test run in Fall of 1998 to measure and quantify the beam properties, like stability, distributions, tails, and backgrounds, which will be discussed in this paper. The actual plasma experiments are planned for the spring of 1999.

The 3 km long linac of the Stanford Linear Accelerator Center (SLAC) has for many years provided low emittance beams for the SLC collider. With the beginning of the operation of the B-Factory, PEP-II, the linac will now serve primarily as an injector for the low (LER) and high energy rings (HER) of PEP-II. The different beams are stabilized by a new regional linac energy management (LEM) program, which keeps the magnet strengths and therefore the deflections constant at each of the four extraction points. They are at 3.1 GeV (positrons for LER), 9 GeV (electrons for HER), 25 GeV (electrons for the positron production), and 28.5 GeV (electrons for other purposes such as test beams, plasma experiments, and iris destruction tests). Since many components of the accelerator can be configured on each pulse, it is possible to run these beams with different intensities, bunch length, energies, rates, etc. Only the quadrupole magnet strengths are fixed, producing different lattices for different energy beams, which must be matched at extraction from the linac. Since PEP-II injection does not require all of the full 120 Hz rate, it is possible to run other experiments at the same time. That might include an …

The experiment E155 at SLAC measured the spin structure functions g{sub 1} and g{sub 2} of the proton and deuteron. The experiment used deep inelastic scattering of 48.3 GeV longitudinally polarized electrons incident on polarized solid {sup 15}NH{sub 3} and {sup 6}LiD targets. The data taken by three independent spectrometers covered a kinematic range of 0.014 < x < 0.9 and 1 (GeV/c){sup 2} < Q{sup 2} < 40 (GeV/c){sup 2}. Due to the high luminosity and polarization available at SLAC the data on g{sub 1} are to date the most precise in this kinematic range. The x and Q{sup 2} dependence of g{sub 1} has been studied using NLO PQCD fits, allowing extraction of values for the Bjorken sum rule and quark and gluon spin contributions to the nucleon. Results are presented for g{sub 1} and g{sub 2} for the proton and deuteron.

None

We present an overview of the electroweak physics program of the SLD experiment at the Stanford Linear Accelerator Center (SLAC). A data sample of 550K Z{sup 0} decays has been collected. This experiment utilizes a highly polarized electron beam, a small interaction volume, and a very precise pixel vertex detector. It is the first experiment at a linear electron collider. We present a preliminary result for the weak mixing angle, sin{sup 2}({theta}{sub W}{sup eff}) = 0.23110 {+-} 0.00029. We also present a preliminary result for the parity violating parameter, A{sub b} = 0.898 {+-} 0.029. These measurements are used to test for physics beyond the Standard Model.

The purpose of this feasibility study was to conduct preliminary modeling to elucidate the mechanisms responsible for the effects observed in the Air Force Research Laboratory (AFRL) shock tube experiment. It was assumed that the plasma is simply a region of gas in the shock tube that has a higher gas temperature. Computational fluid dynamics (CFD) calculations were performed to simulate the propagation of a shock wave through the tube, using the same parameters in the experiment. Both 1- D and 3-D CFD calculations were performed to determine which effects can be explained simply by axial temperature gradients and which effects require the presence of radial temperature gradients. Discharge plasma physics calculations of a longitudinal glow discharge were then used to establish if the electrical currents used in the experiment are consistent with the gas temperature distributions that are necessary to explain the observed effects.

None

The studies presented in this note are focused on the lifetime characterization with positrons for the symmetrical low {beta}{sub y} lattice. Before switching back to electrons, detailed lifetime studies were performed in order to gather data that could be compared to similar ones with electrons, the ultimate goal being to define a model that could be used to predict lifetimes. The report is divided into three parts: simulations to allow decoupling of the different contributions to the lifetime; review of the experimental conditions and related problems; and analysis of the data and discussion of the limitations.

This workshop was requested by Dr. Robert Marianelli, Director of the DOE-BES Chemical Sciences Division, to update the findings of the Workshop on Molecular Environmental Sciences (MES) held at Airlie, VA, in July 1995. The Airlie Workshop Report defined the new interdisciplinary field referred to as Molecular Environmental Science (MES), reviewed the synchrotron radiation methods used in MES research, assessed the adequacy of synchrotron radiation facilities for research in this field, and summarized the beam time requirements of MES users based on a national MES user survey. The objectives of MES research are to provide information on the chemical and physical forms (speciation), spatial distribution, and reactivity of contaminants in natural materials and man-made waste forms, and to develop a fundamental understanding of the complex molecular-scale environmental processes, both chemical and biological, that affect the stability, transformations, mobility, and toxicity of contaminant species. These objectives require parallel studies of ''real'' environmental samples, which are complicated multi-phase mixtures with chemical and physical heterogeneities, and of simplified model systems in which variables can be controlled and fundamental processes can be examined. Only by this combination of approaches can a basic understanding of environmental processes at the molecular-scale be achieved.

This report describes the methodology used in conducting the Cold Vacuum Dlying Facility (CVDF) Hazard Analysis to support the CVDF Final Safety Analysis Report and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports,'' and implements the requirements of DOE Order 5480.23, ''Nuclear Safety Analysis Reports.''

GPP (pronounced ''jeep'') is a general-purpose postprocessor for wind turbine data analysis. The original author, Marshall Buhl, a member of the National Wind Technology Center (NWTC) of the National Renewable Energy Laboratory (NREL), developed GPP to postprocess test data and simulation predictions. Norman Weaver of InterWeaver Consulting is responsible for coding most of the recent additions to Version 6. GPP reads data into large arrays and allows the user to run many types of analyses on the data stored in memory. It runs on inexpensive computers common in the wind industry. One can even use it on a laptop in the field. We wrote the program in such a way as to make it easy to add new types of analyses and to port it to many types of computers. Although GPP is very powerful and feature rich, it is still very easy to learn and easy to use. Exhaustive error trapping prevents one from losing valuable work caused by input errors. We believe that GPP can make a significant impact on engineering productivity in the wind industry.

This document provides an initial basis for determining the duration of operating steps and the required resources for chemically treating K Basin sludge before transporting it to Tank Farms. It was assumed that all operations would take place within a TPA specified 13-month timeframe.

None

R-parity-violating supersymmetry with a conserved baryon number $B$ provides a framework for particle physics with lepton number ($L$) violating interactions. Two important probes of the $L$-violating physics are neutrino masses and sneutrino-antisneutrino mass-splittings. We evaluate these quantities in the context of the most general CP-conserving, R-parity-violating $B$-conserving extension of the minimal supersymmetric standard model. In generic three-generation models, three sneutrino-antisneutrino mass splittings are generated at tree-level. In contrast, only one neutrino mass is generated at tree-level; the other two neutrinos acquire masses at one-loop. In many models, the dominant contribution to the radiative neutrino masses is induced by the non-zero sneutrino-antisneutrino mass splitting.

The purpose of the Signal Based Motion Compensation (SBMC) for Synthetic Aperture Radar (SAR) effort is to develop a method to measure and compensate for both down range and cross range motion of the radar in order to provide high quality focused SAR imagery in the absence of precision measurements of the platform motion. Currently SAR systems require very precise navigation sensors for motion compensation. These sensors are very expensive and are often supplied in pairs for reliability. In the case of GPS they can be jammed, further degrading performance. This makes for a potentially very expensive and possibly vulnerable SAR system. SBMC can eliminate or reduce the need for these expensive navigation sensors thus reducing the cost of budget minded SAR systems. The results on this program demonstrated the capability of the SBMC approach.