The application of cyclic CO2, often referred to as the CO2 Huff-n-Puff process, may find its niche in the maturing waterfloods of the Permian Basin. Coupling the CO2 Huff-n-Puff process to miscible flooding applications could provide the needed revenue to sufficiently mitigate near-term negative cash flow concerns in the capital-intensive miscible projects. Texaco Exploration & Production Inc. and the U. S. Department of Energy have teamed up in an attempt to develop the CO2 Huff-n-Puff process in the Grayburg and San Andres formations which are light oil, shallow shelf carbonate reservoirs that exist throughout the Permian Basin. This cost-shared effort is intended to demonstrate the viability of this underutilized technology in a specific class of domestic reservoir. A significant amount of oil reserves are located in carbonate reservoirs. Specifically, the carbonates deposited in shallow shelf (SSC) environments make up the largest percentage of known reservoirs within the Permian Basin of North America. Many of these known resources have been under waterflooding operations for decades and are at risk of abandonment if crude oil recoveries cannot be economically enhanced 1,2 . The selected sites for this demonstration project are the Central Vacuum Unit waterflood in Lea County, New Mexico and the …

This Design Review Report (DRR) documents the contractor design verification methodology and records associated with project W-314`s AN Valve Pit Upgrades design package. The DRR includes the documented comments and their respective dispositions for this design. Acceptance of the comment dispositions and closure of the review comments is indicated by the signatures of the participating reviewers. Project W-314, Tank Farm Restoration and Safe Operations, is a project within the Tank Waste Remediation System (TWRS) Tank Waste Retrieval Program. This project provides capital upgrades for the existing Hanford tank farms` waste transfer, instrumentation, ventilation, and electrical infrastructure systems. To support established TWRS programmatic objectives, the project is organized into two distinct phases. The initial focus of the project (i.e., Phase 1) is on waste transfer system upgrades needed to support the TWRS Privatization waste feed delivery system. Phase 2 of the project will provide upgrades to support resolution of regulatory compliance issues, improve tank infrastructure reliability, and reduce overall plant operating/maintenance costs. Within Phase 1 of the W-314 project, the waste transfer system upgrades are further broken down into six major packages which align with the project`s work breakdown structure. Each of these six sub-elements includes the design, procurement, and construction …

Tuff samples collected from the Exploratory Studies Facility (ESF) were X-rayed to estimate relative mineral abundances. X-ray analysis was performed on sub-samples of specimens collected from both the Single Heater Test (SHT) and Drift Scale Heater Test (DST) that were used for thermomechanical measurements, as well as samples collected from cores retrieved from boreholes in the Drift Scale Test Area. The abundance of minerals that could affect the behavior of the host rock at repository relevant temperatures is of particular interest. These minerals include crystobalite, which undergoes a phase transition and volume change at elevated temperature (-250 `C), and smectite and clinoptilolite that can dehydrate at elevated temperature with accompanying volume reduction. In addition, the spatial distribution of SiO, polymorphs and secondary minerals may provide evidence for deducing past fluid pathways. The mineral abundances tabulated here include data reported previously in three milestone reports (Roberts and Viani, 1997a,b; Viani and Roberts, 1996) but re-analyzed (see below), as well as previously unreported data. Previous X-ray diffraction analyses of samples from the ESF (Roberts and Viani, 1997a; Viani and Roberts, 1996) utilized the matrix flushing method of Chung (1974) and an internal intensity standard (corundum) to quantify the abundances of the phases …

Tuff samples collected from the Exploratory Studies Facility (ESF) were X-rayed to estimate relative mineral abundances. X-ray analysis was performed on sub-samples of specimens collected from both the Single Heater Test (SHT) and Drift Scale Heater Test (MT) that were used for thermomechanical measurements, as well as samples collected from cores retrieved from boreholes in the Drift Scale Test Area. The abundance of minerals that could affect the behavior of the host rock at repository relevant temperatures is of particular interest. These minerals include cristobalite, which undergoes a phase transition and volume change at elevated temperature (-250 {degree}C), and smectite and clinoptilolite that can dehydrate at elevated temperature with accompanying volume reduction. In addition, the spatial distribution of Si02 polymorphs and secondary minerals may provide evidence for deducing past fluid pathways. The mineral abundances tabulated here include data reported previously in three milestone reports but reanalyzed, as well as previously unreported data.

Fatigue tests have been conducted on Types 304 and 316NG stainless steels to evaluate the effects of various material and loading variables, e.g., steel type, strain rate, dissolved oxygen (DO) in water, and strain range, on the fatigue lives of these steels. The results confirm significant decreases in fatigue life in water. Unlike the situation with ferritic steels, environmental effects on Types 304 and 316NG stainless steel are more pronounced in low-DO than in high-DO water. Experimental results have been compared with estimates of fatigue life based on a statistical model. The formation and growth of fatigue cracks in air and water environments are discussed.

The purpose of SERDP project CP-1038 is to evaluate and develop non-thermal plasma (NTP) reactor technology for Department of Defense (DoD) air emissions control applications. The primary focus is on oxides of nitrogen (NO{sub x}) and a secondary focus on hazardous air pollutants (HAPs), especially volatile organic compounds (VOCs). Example NO{sub x} sources are jet engine test cells (JETCs) and diesel engine powered electrical generators. Example VOCs are organic solvents used in painting, paint stripping, and parts cleaning. To design and build NTP reactors that are optimized for particular DoD applications, one must understand the basic decomposition chemistry of the target compound(s) and how the decomposition of a particular chemical species depends on the air emissions stream parameters and the reactor operating parameters. This report is intended to serve as an overview of the subject of reactor scaling and optimization and will discuss the basic decomposition chemistry of nitric oxide (NO) and two representative VOCs, trichloroethylene and carbon tetrachloride, and the connection between the basic plasma chemistry, the target species properties, and the reactor operating parameters (in particular, the operating plasma energy density). System architecture, that is how NTP reactors can be combined or ganged to achieve higher capacity, will …

Silicon crystal mirrors are used to reflect high-intensity X-ray beams. A large amount of heat is generated in each mirror. To minimize the effect of thermal expansion on the crystal mirrors, heat is removed by pumping liquid gallium (with a boiling point of 29.8 C) through passages in the crystal mirrors. During system operation, mirror motion should be kept to an acceptable level to avoid performance degradation. There are many potential sources of excitation to the crystal assembly; one such source is the flowing gallium. Two series of tests were performed earlier for a near-prototypical gallium cooling system (1-2). This paper describes a series of tests to measure the general vibration response characteristics of critical components in the monochromator system that contains the mirrors. The main objective of this work is to identify the root cause of vibration and to recommend general guidelines for abatement of vibration. This is achieved by performing many tests to understand the response characteristics under various conditions, by analysis of the response data, and by use of some theoretical considerations.

Ion beam deposition of either elemental targets in a chemically active gas such as oxygen or nitrogen, or of the appropriate oxide or nitride target, usually with an additional amount of ambient oxygen or nitrogen present, is an effective means of depositing high quality oxide and nitride films. However, there are a number of phenomena which can occur, especially during the production of multicomponent films such as the ferroelectric perovskites or high temperature superconducting oxides, which make it desirable to monitor the composition and structure of the growing film in situ. These phenomena include thermodynamic (Gibbsian), and oxidation or nitridation-driven segregation, enhanced oxidation or nitridation through production of a highly reactive gas phase species such as atomic oxygen or ozone via interaction of the ion beam with the target, and changes in the film composition due to preferential sputtering of the substrate via primary ion backscattering and secondary sputtering of the film. Ion beam deposition provides a relatively low background pressure of the sputtering gas, but the ambient oxygen or nitrogen required to produce the desired phase, along with the gas burden produced by the ion source, result in a background pressure which is too high by several orders of …

None

This thesis presents the results from the investigation of time dependent B{sub d}{sup 0} {bar B}{sub d}{sup 0} mixing in B {yields} lepton X, B{sub d}{sup 0} {yields} D*{sup -} {yields} {bar D}{sup 0} {pi}{sup -}, {bar D}{sup 0} {yields} K{sup +} {pi}{sup -} channel in p{bar p} collisions at {radical}s = 1.8 TeV using 110 pb{sup -1} data collected with the CDF detector at the Fermilab Tevatron Collider. The {bar D}{sup 0} vertex is reconstructed. The B{sub d}{sup 0} decay length is estimated using the distance from the primary vertex to the measured position of the D{sup 0} vertex. The B{sup 0} momentum is estimated using the D{sup 0} momentum and a kinematic correction factor from Monte Carlo. With the dilution floating, {Delta}M{sub d} = 0.55 {+-}{sub 0.16}{sup 0.15} (stat) {+-} 0.06 (syst)ps{sup -1} is measured.

Lithium metazirconate (Li{sub 2}ZrO{sub 3}) is a promising tritium breeder material for fusion reactors because of its excellent tritium release characteristics. In particular, for water-cooled breeding blankets (e.g., ITER), Li{sub 2}ZrO{sub 3} is appealing from a design perspective because of its good tritium release at low operating temperatures. The steady-state and transient tritium release/retention database for Li{sub 2}ZrO{sub 3} is reviewed, along with conventional diffusion and first-order surface resorption models which have been used to match the database. A first-order surface resorption model is recommended in the current work both for best-estimate and conservative (i.e., inventory upper-bound) predictions. Model parameters we determined and validated for both types of predictions, although emphasis is placed on conservative design predictions. The effects on tritium retention of ceramic microstructure, protium partial pressure in the purge gas and purge gas flow rate are discussed, along with other mechanisms for tritium retention which may not be dominant in the experiments, but may be important in blanket design analyses. The proposed tritium retention/release model can be incorporated into a transient thermal performance code to enable whole-blanket predictions of tritium retention/release during cyclic reactor operation. Parameters for the ITER driver breeding blanket are used to generate a numerical …

Only one well remains in production in the Port Neches CO2 project; Kuhn #14. Production from this project is approaching economic limit and the project is nearing termination at this point. The work over to return Kuhn #38 to production failed and the well is currently shut in. All produced CO2 is currently being reinjected in the reservoir. The CO2 recycled volume is 2 MMCFD.

The West Hackberry Tertiary Project is a field test of the concept that air injection can generate tertiary oil recovery through the Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering tertiary oil through gravity discharge. The novel aspect of this project is the use of air as the injection fluid.

In preparation for ignition on the National Ignition Facility, the Lawrence Livermore National Laboratory� s Inertial Confinement Fusion Program, working in collaboration with Los Alamos National Laboratory, Commissariat a 1� Energie Atomique (CEA), and Laboratory for Laser Energetics at the University of Rochester, has performed a broad range of experiments on the Nova and Omega lasers to test the fundamentals of the NIF target designs. These studies have refined our understanding of the important target physics, and have led to many of the specifications for the NIF laser and the cryogenic ignition targets. Our recent work has been focused in the areas of hohlraum energetics, symmetry, shock physics, and target design optimization & fabrication.

The published database for the tensile properties of unirradiated and irradiated vanadium-based alloys tested at Argonne National Laboratory (ANL) has been reviewed. The alloys tested are in the ranges of V-(0-18)wt.%Ti and V-(4-15)wt.%Cr-(3-15)wt.%Ti. A consistent methodology, based on ASTM terminology and standards, has been used to re-analyze the unpublished load vs. displacement curves for 162 unirradiated samples and 91 irradiated samples to determine revised values for yield strength (YS), ultimate tensile strength (UTS), uniform elongation (UE) and total elongation (TE). The revised data set contains lower values for UE ({minus}5{+-}2% strain) and TE ({minus}4{+-}2% strain) than previously reported. Revised values for YS and UTS are consistent with the previously-published values in that they are within the scatter usually associated with these properties.

We report on the performance of the CDF End Plug Hadron Calorimeter in a test beam. The sampling calorimeter is constructed using 2 inch iron absorber plates and scintillator planes with wavelength shifting fibers for readout. The linearity and energy resolution of the calorimeter response to pions, and the transverse uniformity of the response to muons and pions are presented. The parameter e/h, representing the ratio of the electromagnetic to hadronic response, is extracted from the data.

While many issues in the area of virtual reality (VR) research have been addressed in recent years, the constant leaps forward in technology continue to push the field forward. VR research no longer is focused only on computer graphics, but instead has become even more interdisciplinary, combining the fields of networking, distributed computing, and even artificial intelligence. In this article we discuss some of the issues associated with distributed, collaborative virtual reality, as well as lessons learned during the development of two distributed virtual reality applications.