The objective of this report is to identify and document Mined Geologic Disposal System (MGDS) requirements for centralized command and control. Additionally, to further develop the MGDS monitoring and control functions. This monitoring and control report provides the following information: (1) Determines the applicable requirements for a monitoring and control system for repository operations and construction (excluding Performance Confirmation). (2) Makes a determination as to whether or not centralized command and control is required.

This report provides a synopsis of the budget activity related to AIDS from the discovery of the disease in 1981 through FY1999. Funding for AIDS research, prevention and treatment programs within the Department of Health and Human Services (HHS) discretionary budget has increased from $200,000 in FY1981 to an estimated $3.85 billion in FY1999.

None

The Tank Waste Remediation System (TWRS) Configuration Management Implementation Plan describes the actions that will be taken by Project Hanford Management Contract Team to implement the TWRS Configuration Management program defined in HNF 1900, TWRS Configuration Management Plan. Over the next 25 years, the TWRS Project will transition from a safe storage mission to an aggressive retrieval, storage, and disposal mission in which substantial Engineering, Construction, and Operations activities must be performed. This mission, as defined, will require a consolidated configuration management approach to engineering, design, construction, as-building, and operating in accordance with the technical baselines that emerge from the life cycles. This Configuration Management Implementation Plan addresses the actions that will be taken to strengthen the TWRS Configuration Management program.

No abstract is available for this document at this time.

Amesh program generates discrete grids for numerical modeling of flow and transport problems in which the formulation is based on integral finite difference method (IFDM). For example, the output of Amesh can be used directly as (part of) the input to TOUGH2 or TOUGH numerical Simulator (Pruess, 1987, 1990, Pruess, et al., 1996). The code Amesh can generate 1D, 2D or 3D numerical grids for a given set of locations, i.e. the centers of each discrete sub-domain. In the 2D aerial plane the Voronoi tessellation method is used (Voronoi, 1908; Ahuja, 1982; Aurehammer, 1991; Fortune, 1987, 1988, 1993). In this method we can create a mesh of elements, within model domain, where the interfaces between neighbor elements are the perpendicular bisectors of the line connecting the element centers. The interface distances are simply the medians of the line connecting the centers. To create the 3D grid, the vertical direction interface areas are always treated as horizontal projections of the 2D areal plane. In the lateral direction the interface areas are always vertical projections. In both cases the direction of gravity vector is given by the cosine of angle formed by the line joining the element centers and the vertical. From …

The objectives of this analysis are to discuss and evaluate testing results that were performed for the M&O by the Pennsylvania State University (PSU) to evaluate the potential long-term evolution of organic admixtures in cementitious materials at elevated temperatures. The testing was designed to help provide a basis for a determination by the Performance Assessment group (PA) of the long-term acceptability and longevity of cementitious materials for repository use. The main purpose of the testing was to assess the evolution of gases (especially CO{sub 2}) from hydrated cement paste at elevated temperatures and to determine the impact on alkalinity, i.e., the pH value of cement paste pore solution. This information in turn can be used as scoping information to determine if further tests of this nature are needed to support PA. As part of this discussion and evaluation of the PSU results, an assessment of alkalinity in a ''cementitious repository'' and an evaluation of organic materials are presented.

The coupling of laser light with plasmas is one of the key physics issues for the use of high-power lasers for inertial fusion, high-energy-density physics, and scientific stockpile stewardship. The coupling physics is extremely rich and challenging, particularly in the large plasmas to be accessed on the National Ignition Facility (NIF). The coupling mechanisms span the gamut from classical inverse bremsstrahlung absorption to a variety of nonlinear optical processes. These include stimulated Raman scattering (SRS) from electron plasma waves, stimulated Brillouin scattering (SBS) from ion sound waves, resonant decay into electron plasma and ion sound waves, and laser beam filamentation. These processes depend on laser intensity and produce effects such as changes in the efficiency and location of the energy deposition or generation of a component of very energetic electrons, which can preheat capsules. Coupling physics issues have an extremely high leverage. The coupling models are clearly very important ingredients for detailed calculations of laser-irradiated target behavior. Improved understanding and models enable a more efficient use of laser facilities, which becomes even more important as these facilities become larger and more expensive. Advances in the understanding also allow a more timely and cost-effective identification of new applications of high-power lasers, …

During the fourth contract year, the authors continued to develop Ballistic technology of shell formation. A new upgraded version of Ballistic Furnace with longer hot zone (1.56m) and cooling one (1.2m) had been finally assembled, and a lot of shell formation experiments had been carried out. The change of the Ballistic Furnace configuration has led to significant changing in operational conditions suitable for shells production. They had found optimal operational conditions for some grades of initial granules giving them high yield of good shells. Serious attention was paid on initial granules preparation. In the experiments some unexpected results were obtained--first of all it was a strong influence of temperature profile, an initial granule velocity and a trajectory angle on good quality shells yield. Those observations made them consider some additional physical phenomena (initial granule defragmentation and gas convection inside hot zone) to explain good shell formation. Appropriate estimations of the velocity of possible convectional gas currents in the hot zone, strength of formed shells, thermal stress in an initial granule caused by its fast heating in the ballistic furnace etc. were made. Good quality shells up to 2mm in diameters with high yield were produced. Although a production of good …

The objective of this report is to determine Nitrogen and Biodiversity (N-fixer) effects on photosynthetic responses in interaction with elevated CO{sub 2} in the BioCON FACE experiment.

The objective of this project is to develop a hot-gas desulfurization process scheme for control of H{sub 2}S in HTHP coal gas that can be more simply and economically integrated with known regenerable sorbents in DOE/METC-sponsored work than current leading hot-gas desulfurization technologies. In addition to being more economical, the process scheme to be developed must yield an elemental sulfur byproduct.

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: 1.Advanced petrophysics 2.Three-dimensional (3-D) seismic 3.Cross-well bore tomography 4.Advanced reservoir simulation 5.Carbon dioxide (CO2) stimulation treatments 6.Hydraulic fracturing design and monitoring 7.Mobility control agents

The principal objective of this CO2 Huf-n-Puff (H-n-P) project is to determine the feasibility and practicality of the technology in a waterflooded shallow shelf carbonate environment. The results of parametric simulation of the CO2 H-n-P process, coupled with reservoir characterization components are to be used to determine if this process is technically and economically feasible for field implementation. The technology transfer objective of the project is to disseminate the knowledge gained through an innovative plan of increasing oil production and deferring abandonment of shallow shelf carbonate reservoirs.

'The objective of this project is to provide a means to optimize ligand architecture for f-block metal recognition. The authors strategy builds on an innovative and successful molecular modeling approach in developing polyether ligand design criteria for the alkali and alkaline earth cations. The hypothesis underlying this proposal is that differences in metal ion binding with multidentate ligands bearing the same number and type of donor groups are primarily attributable to intramolecular steric factors. They propose quantifying these steric factors through the application of molecular mechanics models. The research involves close integration of theoretical and experimental chemistry. The experimental work entails synthesizing novel ligands and experimentally determining structures and binding constants for metal ion complexation by series of ligands in which architecture is systematically varied. The theoretical work entails using electronic structure calculations to parameterize a molecular mechanics force field for a range of metal ions and ligand types. The resulting molecular mechanics force field will be used to predict low energy structures for unidentate, bidentate, and multidentate ligands and their metal complexes through conformational searches. Results will be analyzed to assess the relative importance of several steric factors including optimal M-L length, optimal geometry at the metal center, optimal …

In FY 1998, the BNL LDBD Program funded 20 projects, 4 of which were new starts, at a total cost of $2,563,681. The small number of new starts was a consequence of severe financial problems that developed between FY 1997 and 1998. Emphasis was given to complete funding for approved multi-year proposals. Following is a table which lists all of the FY 1998 funded projects and gives a history of funding for each by year. Several of these projects have already experienced varying degrees of success as indicated in the individual Project Program Summaries which follow. A total of 17 informal publications (abstracts, presentations, BNL reports and workshop papers) were reported and an additional 13 formal (full length) papers were either published, are in press or being prepared for publication. The investigators on five projects have filed for a patent. Seven of the projects reported that proposals/grants had either been funded or were submitted for funding. In conclusion, a significant measure of success is already attributable to the FY 1998 LDBD Program in the short period of time involved. The Laboratory has experienced a significant scientific gain by these achievements.

The plane impact response of PBX 9501 was measured below 2 GPa using a light-gas gun facility. Time-resolved wave profiles were obtained in a state of uniaxial strain for impact stresses between 0.3 to 1.2 GPa. The dynamic strength of PBX 9501 was measured at high strain rates in both compression and tension. The Hugoniot equation of state was measured.

This reports on a project to develop an indirect sensing technique for diesel fuel quantity control. Development has continued on a vehicle-installed prototype for EPA certification and demonstration. Focus of development is on the use of this technology for retrofitting existing diesel vehicles to reduce emissions rather than exclusively upon deployment in the OEM market. Technical obstacles that have been encountered and their solutions and remaining project tasks are described.

In this work, a parametric study of hot rolling is conducted. The effect of friction model, friction coefficient, roll gap geometry and temperature on the deformation rate field is demonstrated. This parameter space is restricted to a region which is tractable, yet provides considerable variety in the features of non-uniform deformation developed in rolling. The degree and nature of redundant work (shearing) is contrasted for different stream-line locations within the bite. Recommendations for the application of material models in analysis of rolling is made with consideration of the simulation predictions.

This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The objective of this project was to begin work on combining two modeling approaches in order to advance the state-of-the-art in simulating and predicting explosive volcanic eruption dynamics and their effects. The authors began applying the CFDLIB family of codes for the near field (high temperature, velocity, and particle concentration) region of an explosive eruption. The authors also applied the RAMS meteorological code to model the far-field dynamics of eruption clouds and ash fallout. Initial test runs were conducted in preparation for full-scale simulations that would eventually couple the two models for the most comprehensive volcano simulation tool to date. Eventual applications include aviation hazards, risk assessment, and extension to atmospheric collateral effects of conventional and nuclear weapons.

During October 1997, the ETF Evaporator Waste Concentrate Tank No. 2 was discovered to contain a significant accumulation of solid deposits. SRTC performed destructive and nondestructive examination of solid samples from the tank. The results of these tests indicate that the solids contain mixtures of sodium oxalate (65 percent), the sulfide enclathrated sodium aluminosilicate (30 percent), and iron oxide (5 percent).

None

None

This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The objective of this project was to develop and implement data mining technology suited to the analysis of large collections of unstructured data. This has taken the form of a software tool, PADMA (Parallel Data Mining Agents), which incorporates parallel data accessing, parallel scalable hierarchical clustering algorithms, and a web-based user interface for submitting Structured Query Language (SQL) queries and interactive data visualization. The authors have demonstrated the viability and scalability of PADMA by applying it to an unstructured text database of 25,000 documents running on an IBM SP2 at Argonne National Laboratory. The utility of PADMA for discovering patterns in data has also been demonstrated by applying it to laboratory test data for Hepatitis C patients and autopsy reports in collaboration with the University of New Mexico School of Medicine.

Supporting material for the plan includes: QUALITY ASSURANCE, ANALYSIS, AND SAMPLING PLAN FOR NTS AIR; QUALITY ASSURANCE, ANALYSIS, AND SAMPLING PLAN FOR WATER ON AND OFF THE NEVADA TEST SITE; QUALITY ASSURANCE, ANALYSIS, AND SAMPLING PLAN FOR NTS BIOTA; QUALITY ASSURANCE, ANALYSIS, AND SAMPLING PLAN FOR DIRECT RADIATION MONITORING; DATA QUALITY OBJECTIVES PROCESS; VADOSE ZONE MONITORING PLAN CHECKLIST.