This document describes the original basis for selection of the analog input setpoints for the MICON Automation System. In most cases the setpoints were based on vendor supplied information and design requirements. However, some setpoints were also established based on engineering judgment. These setpoints are subject to change as more experience with operation of the ventilation system is obtained. Revision 1 incorporates minor changes to ensure the document setpoints accurately reflect limits established in OSD-T-151-00019, Rev B-0.

The Federal Employees' Health Benefits Program is a health insurance program for federal employees, annuitants, and their dependents. This report contains background information, eligibility and participation, and financing.

THERM is a state-of-the-art, Microsoft Windows{trademark}-based computer program developed at Lawrence Berkeley National Laboratory (LBNL) for use by building component manufacturers, engineers, educators, students, architects, and others interested in heat transfer. Using THERM, you can model two-dimensional heat-transfer effects in building components such as windows, walls, foundations, roofs, and doors; appliances; and other products where thermal bridges are of concern. THERM's heat-transfer analysis allows you to evaluate a product's energy efficiency and local temperature patterns, which may relate directly to problems with condensation, moisture damage, and structural integrity. THERM's two-dimensional conduction heat-transfer analysis is based on the finite-element method, which can model the complicated geometries of building products. The program's graphic interface allows you to draw cross sections of products or components to be analyzed. To create the cross sections, you can trace imported files in DXF or bitmap format, or input the geometry from known dimensions. Each cross section is represented by a combination of polygons. You define the material properties for each polygon and introduce the environmental conditions to which the component is exposed by defining the boundary conditions surrounding the cross section. Once the model is created, the remaining analysis (mesher and heat transfer) is automatic. You …

This document describes the test documentation required for converting between different versions of the RDD-100 software application. The area of focus is the successful conversion of the master data set between different versions of the database tool and their corresponding data structures.

This report provides a bibliography that describe general sources of support and a few of the current general guides to writing grant proposals.

This report provides a summary of major provisions of federal law and a chronology of key legislative and judicial actions.

None

This report contains the summary and legislative history of the Budget Enforcement Act of 1997.

This report is categorized into seven categories: (I) The Issue, (II) Background, (III) The APEC Process and Activities, (IV) The Osaka Action Agenda, (V) The Manila Action Plan for APEC (MAPA), (VI) The 1997 Vancouver Meetings and (VII) Conclusion.

In 1997, during the first session of the 105th Congress, the House and Senate will consider many different budgetary measures. Most of these measures will pertain to FY1998 and beyond, but some measures will make adjustments in the budget for the current fiscal year, FY1997. This issue brief describes House and Senate action on major budgetary legislation within the framework of the congressional budget process and other procedural requirements.

Congress, federal agencies, and affected states are seeking to better understand Pfiesteriapiscicida (a recently identified species of dinoflagellate) and related species, whose blooms release toxins that can harm fish and possibly human health under certain conditions. Although menhaden, an industrial fish used primarily in fishmeal and oil production, is the dominant species observed to have been killed by these organisms, consumers have reduced their purchases of Chesapeake Bay seafood after extensive media coverage highlighted toxic events. Both the water and lipid-soluble toxins of Pfiesteria and related species have been blamed for adverse health effects in people who have come in contact with affected waters.

President Clinton signed two reconciliation acts into law in August 1997 as part of a plan to balance the budget by FY2002. To ensure compliance with this goal, enforcement procedures were included in one of the acts in a title referred to separately as the Budget Enforcement Act (BEA) of 1997. The BEA of 1997 extends procedures under the Budget Enforcement Act (BEA) of 1990 through FY2002

The purpose of this plan is to describe the preferred remedial alternative for addressing the Gunsite 113 Access Road Unit located at SRS in Aiken, SC, and to provide an opportunity for public input into the remedial action selection process.

This document has been prepared and is being released for Project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility. This document sets forth the physical design criteria, Codes and Standards, and functional requirements that were used in the design of the Cold Vacuum Drying Facility. This document contains section 3, 4, 6, and 9 of the Cold Vacuum Drying Facility Design Requirements Document. The remaining sections will be issued at a later date. The purpose of the Facility is to dry, weld, and inspect the Multi-Canister Overpacks before transport to dry storage.

This document presents the radiological dose and toxicological exposure calculations for a spray leak inside the unloading area of the 204-AR Waste Unloading Facility.

The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, operating treatment, storage, and/or disposal units, such as the PUREX Storage Tunnels (this document, DOE/RL-90-24). Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the content of the Part B permit application guidance prepared by the Washington State Department of Ecology (Ecology 1996) and the US Environmental Protection Agency (40 Code of Federal Regulations 270), with additional information needs defined by the Hazardous and Solid Waste Amendments and revisions of Washington Administrative Code 173-303. For ease of reference, the Washington State Department of Ecology alpha-numeric section identifiers from the permit application guidance documentation (Ecology 1996) follow, in brackets, the chapter headings and subheadings. A checklist indicating where information is contained in the PUREX Storage Tunnels permit application documentation, in relation to the Washington State Department of Ecology guidance, is located in the Contents Section. Documentation contained in the General Information Portion is broader in nature and could be used …

Toxicological consequences are presented for three postulated accidents involving caustic soda (sodium hydroxide) addition to a waste tank to adjust the tank waste pH. These are spray from the skid mounted delivery system, spray from a cargo tank truck, and rupture of a cargo tank truck. Consequences for the onsite and offsite receptor are calculated.

The project`s aim is to complete development of the Radial Cutting Torch, a pyrotechnic cutter, for use in all downhole tubular cutting operations in the petroleum industry. Project objectives are to redesign and pressure test nozzle seals to increase product quality, reliability, and manufacturability; improve the mechanical anchor to increase its temperature tolerance and its ability to function in a wider variety of wellbore fluids; and redesign and pressure test the RCT nozzle for operation at pressures from 10 to 20 ksi. The proposal work statement is included in the statement of work for the grant via this reference.

This revision of the Project W-314 Upgrade Scope Summary Report (USSR) represents a refinement of the project scope and supporting justification from which the Conceptual Design Report (CDR) was developed. It defines the actual upgrades and provides traceability to the requirement or driver for the activity.

The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, `operating` treatment, storage, and/or disposal units, such as the PUREX Storage Tunnels (this document, DOE/RL-90-24).

This report summarizes the work performed under DOE grant DE-FG03-95ER54334. Lodestar was an active participant in the low power Collective Thomson Scattering (CTS) diagnostic experiment at TFTR in collaboration with MIT. A simple and effective fitting technique was developed to extract key parameters from the scattered data. Utilizing this new technique, the concept of lower hybrid resonance scattering was adapted for a feasibility study of a low/medium power collective scattering diagnostic for ITER. The implementation and the testing of such a technique for actual parameter extraction using TFTR data, however, was severely limited due to experimental and instrumentation complications. Based on the studies the authors have performed up to date, it is believed that a combination of non-physics related effects such as multiple wall reflection of incident signal and spectral impurity problem o the gyrotron can account for the anomalous signal strength. A collaborative effort with GA was initiated and a feasibility study of developing and implementing a collective thomson scattering (CTS) diagnostic for the detection of energetic particles at DIII-D was completed. Specifically, the process of selecting an optimum receiver location for the diagnostic is discussed in detailed. Results presented here include detailed signal to noise calculations and ray-tracing …

Naturally Occurring Radioactive Materials (NORM) is a common and costly contaminant of produced waters associated with natural gas production and exploration. One way of combating this problem is by identifying the problem beforehand. Our approach to this problem involves development of NORM prediction capabilities based on the geological environment. During the eleventh quarter of this project, emphasis again remained on two major tasks; identifying new sampling sites and seeking approval for final project revisions. In light of the delays experienced, the project has been granted a one year extension, and a revision is currently under review.

Energy Conversions Incorporated has made substantial progress on the EMD-710 dual-fuel test cell in the first quarter of the project. The project is on schedule and has not met with any major roadblocks that would derail the planned timetable. Please note that much of the work done started before the funding arrived, and therefore those items are not included in the financial expenditures for the quarter.

The Vapor Issue Resolution Program tasked the Vapor Team (the team) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-T-104. This document presents sampling data resulting from the February 7, 1996 sampling of SST 241-T-104. Analytical results will be presented in separate reports issued by the laboratories that supplied and analyzed the sampling media.