Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Alvin, Texas that includes local, state, and national news along with advertising.

The {Sigma}5(210)/[100] symmetric tilt grain boundary in YAG was produced by UHV diffusion bonding precisely oriented single crystals. The boundary has been characterized by HREM along two different directions, parallel and perpendicular to the tilt axis. Models of the atomic structure of the boundary were formed following the Coincident Site Lattice scheme. The resulting models are equivalent to twins formed at the atomic scale. The high resolution images show no rigid crystal translations away from the perfect mirror reflection relation. Comparison of the simulated images using the atomic model as input with the experimental images identifies the plane of mirror symmetry. The atomic model is shown to be in good agreement with the experimental images when viewed parallel to tilt axis, but disagrees with the images perpendicular to tilt axis. Agreement between simulated and experimental images can be improved by changing the composition of the grain boundary with respect to the bulk. To reach a more certain conclusion on the structure of the grain boundary will require additional theoretical calculations.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Numerical studies of the nonlinear evolution of MHD-type tearing modes in three-dimensional toroidal geometry with neoclassical effects are presented. The inclusion of neoclassical physics introduces an additional free-energy source for the nonlinear formation of magnetic islands through the effects of a bootstrap current in Ohm`s law. The neoclassical tearing mode is demonstrated to be destabilized in plasmas which are otherwise {Delta}` stable, albeit once an island width threshold is exceeded. The plasma pressure dynamics and neoclassical tearing growth is shown to be sensitive to the choice of the ratio of the parallel to perpendicular diffusivity ({Chi}{parallel}/{Chi}{perpendicular}). The study is completed with a demonstration and theoretical comparison of the threshold for single helicity neoclassical MHD tearing modes, which is described based on parameter scans of the local pressure gradient, the ratio of perpendicular to parallel pressure diffusivities {Chi}{perpendicular}/{Chi}{parallel}, and the magnitude of an initial seed magnetic perturbation.

An internal state variable formulation for phase transforming alloy steels is presented. We have illustrated how local transformation plasticity can be accommodated by an appropriate choice for the corresponding internal stress field acting between the phases. The state variable framework compares well with a numerical micromechanical calculation providing a discrete dependence of microscopic plasticity on volume fraction and the stress dependence attributable to a softer parent phase. The multiphase model is used to simulate the stress state of a quenched bar and show qualitative trends in the response when the transformation phenomenon is incorporated on the length scale of a global boundary value problem.

This paper describes a calculational procedure using the ABAQUS finite element code that simulates a carburizing and quench heat treat cycle for automotive gears. The procedure features a numerically efficient 2-phase constitutive model to represent transformational plasticity effects for the austenite/martensite transformation together with refined finite element meshes to capture the steep gradients in stress and composition near the gear surfaces. The procedure is illustrated on carburizing and quenching of a thick ring, and comparison of model predictions for distortion, phase distribution, and residual stress with experiment is discussed. Sensitivity of predictions to mesh refinement is studied.

There are several methods used to fabricate carbon-carbon composites. One used extensively in the fabrication of aerospace components such as rocket nozzles and reentry vehicle nosetips, as well as commercial components for furnace fixturing and glass manufacturing, is the densification of a woven preform with molten pitch, and the subsequent conversion of the pitch to graphite through heat treatment. Two types of pitch are used in this process; coal tar pitch and petroleum pitch. The objective of this program was to determine if a pitch produced by the direct extraction of coal could be used as a substitute for these pitches in the fabrication of carbon-carbon composites. The program involved comparing solvent extracted pitch with currently accepted pitches and rigidizing a carbon-carbon preform with solvent extracted pitch for comparison with carbon-carbon fabricated with currently available pitch.

The factors that affect the rate and extent of a model aromatic compound, benzoate, in methanogenic environments was studied. Benzoate is degraded to a threshold concentration below which no further substrate degradation occurs. The threshold concentration depended on the substrate concentration and the amount of acetate present. The threshold value was not a function of the kinetic ability of the organism or toxicity of the end products. Rather a minimal Gibb's free energy value may exist where thermodynamic constraints preclude further benzoate degradation. In addition, new bacterial species were isolated and described, that degrade benzoate or reduce iron, cobalt and other metals.

A comprehensive document to the Facsimile Transmission Cover Sheet.

This engineering report evaluates alternatives for the replacement of the Farinon microwave radio system. The system is beyond its expected life cycle and has decreasing maintainability. Principal applications supported by the Farinon system are two electrical utility monitor and control systems, the Integrated Transfer Trip System (ITTS), and the Supervisory Control and Data Acquisition (SCADA) system.

Letter from Don Baker with attached information about the history of the Dallas Gay Political Caucus.

Letter from Don Baker to Vivienne Armstrong, Dick Peeples, and Louise Young regarding the need for more exposure on the history of gay rights and his efforts to get a documentary about Dallas' gay history made.

The natural gas monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. The feature article for this month is Natural Gas Industry Restructuring and EIA Data Collection.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 10 P.M.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 5 P.M.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 5 P.M.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 6pm.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 10pm.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.