The work described in this activity plan addresses Information Need 2.7.3 of the Yucca Mountain Site Characterization Plan (l), which reads Determination that the design criteria in lOCFR60.130 through 60.133 and any appropriate additional design objectives pertaining to criticality control have been met. This work falls under section WBS 1.2.2.5 2 (Basket Materials) of WBS 1.2.2.5 (Waste Package Materials) in the Work Breakdown Structure of the Yucca Mountain Site Characterization Project.

An addendum was completed to the performance assessment (PA) analysis for the active 200 West Area low-level solid waste burial grounds. The addendum includes supplemental information developed during the review of the PA analysis, an ALARA analysis, a comparison of PA results with the Hanford Groundwater Protection Strategy, and a justification for the assumption of 500 year deterrence to the inadvertent intruder.

The objective of this study is to refine the current conceptual model for the extent, character, and thickness of DNAPL contamination in the A/M Area. The evaluation is based upon historical records of operations and waste management and on detailed screening of historical groundwater concentrations against solubility limits. The topology of the Green Clay confining zone is used as the primary factor determining DNAPL pool thickness and resulting migration paths.

One serious challenge for hadron calorimeters is setting the absolute calibration. Electromagnetic calorimeters in a magnetic spectrometer have the momentum of electrons to calibrate against. In addition, at hadron colliders, Z supplies a narrow resonance to determine calibrations. No such well-measured processes have been available in the past for hadron calorimeters. In high energy collisions, high Pt hadrons are not normally isolated, rather appearing as part of jets. Contamination of the energy scale by unmeasured neutrals or by leakage from adjacent particles is always a concern. There are low cross section processes that possess jets of well understood energy, for example a high pt Z recoiling off of a single jet. The high energy and luminosity of the LHC may supply enough of these events for quantities useful for calibration. In this paper we outline the possibility for doing in situ calibration using Z recoiling off of a jet events, and {ital t{anti t}} events. We also comment on the more conventional possibilities of using muons and energy-flow to calibrate.

None

None

This safety evaluation for packaging (SEP) evaluates and documents the ability of the Disposable Solid Waste Cask (DSWC) to meet the packaging requirements of HNF-CM-2-14, Hazardous Material Packaging and Shipping, for the onsite transfer of special form, highway route controlled quantity, Type B fissile radioactive material. This SEP evaluates five shipments of DSWCs used for the transport and storage of Fast Flux Test Facility unirradiated fuel to the Plutonium Finishing Plant Protected Area.

None

None

This document presents the plan for studies of how dissolved oxygen affects the catalytic decomposition of the tetraphenylborate ion in alkaline aqueous solution.

The VA, HUD and Independent Agencies appropriations bill includes funding for the Department of Veterans Affairs (VA), Department of Housing and Urban Development (HUD), Environmental Protection Agency (EPA), National Aeronautics and Space Administration (NASA), and a number of independent agencies. This report describes some of the key issues affecting agency funding in FY1997.

This report discusses Fossil Energy Research and Development: Whither Coal.

This technical progress report discusses work on the Radioisotope Generators and Ancillary Activities for the Cassini spacecraft. The Cassini spacecraft is expected to launch in October 1997, and will explore Saturn and its moons. This progress report discusses issues in: spacecraft integration and liason, engineering support, safety, qualified unicouple fabrication, ETG fabrication and testing, ground support equipment, RTG shipping and launch support, designs, reviews and mission application. Safety analysis of the RTGs during reentry and launch accidents are covered. This report covers the period of April 1 to September 29, 1996.

This SSDR establishes the performance, design, development and test requirements for the Final Optic Assembly (FOA). The FOA (WBS 1.8.7) as part of the Target Experimental System (1.8) includes vacuum windows, frequency conversion crystals, focus lens, debris shields and supporting mechanical equipment.

This Subsystem Design Requirement (SSDR) establishes the performance, design, development, and test requirements for the Target Area Auxiliary Subsystems (WBS 1.8.6), which is part of the NIF Target Experimental System (WBS 1.8). This document responds directly to the requirements detailed in NIF Target Experimental System SDR 003 document. Key elements of the Target Area Auxiliary Subsystems include: WBS 1.8.6.1 Local Utility Services; WBS 1.8.6.2 Cable Trays; WBS 1.8.6.3 Personnel, Safety, and Occupational Access; WBS 1.8.6.4 Assembly, Installation, and Maintenance Equipment; WBS 1.8.6.4.1 Target Chamber Service System; WBS 1.8.6.4.2 Target Bay Service Systems.

The overall objective of the research program is to explore the potential application of a new invention involving a multistage column equipped with vortex-inducing contactors (hereafter referred to as the multistage column) for fine coal cleaning process. The research work will identify the design parameters and their effects on the performance of the separation process. the results of this study will provide an engineering basis for further development of this technology in coal cleaning and in the general areas of fluid/particle separation. In the last quarter, we performed data analysis of the bubble sizes using a model based on the unified proportionally equation. In this quarter, we continue to carry our the wastewater treatment tests program, initiated in the last quarter, to demonstrate the multifunction features of the multistage column.

The objective of this work is to demonstrate the use of indigenous microbes as a method of profile control in waterfloods. It is expected that as the microbial population is induced to increase, that the expanded biomass will selectively block the more permeable zones of the reservoir thereby forcing injection water to flow through the less permeable zones which will result in improved sweep efficiency. This increase in microbial population will be accomplished by injecting a nutrient solution into four injectors. Four other injectors will act as control wells. During Phase I, two wells will be cored through the zone of interest. The core will be subjected to special core analyses in order to arrive at the optimum nutrient formulation. During Phase II, nutrient injection will begin, the results monitored, and adjustments to the nutrient composition made, if necessary. Phase II also will include the drilling of three wells for post-mortem core analysis. Phase III will focus on technology transfer of the results. It should be pointed out that one expected outcome of this new technology will be a prolongation of economical waterflooding operations, i.e. economical oil recovery should continue for much longer periods in the producing wells subjected to …

This is a probabilistic analysis of the rail car accidents at the 204- AR Waste Unloading Facility.

Acceptance for test for RFAR installation for facility fire alarm and suppression system.

Acceptance for test for RFAR installation for fire alarm suppression system.

This evaluation designates the waste receipt, storage, assay, and shiping portions of WRAP I as a Limited Control Facility. The technical basis for this designation comes from CSERs in other facilities The limits and controls for this CSER come from other facilities. This is deemed sufficient, since any fissile material being received at WRAP I, will come from those facilities, and as long as the limits for limited control are maintained, the areas considered in this CSER can be designated appropriately.

This document supports the development and presentation of the following accident scenario in the TWRS Final Safety Analysis Report: Unplanned Excavation/Drilling in Pond/Ditch/Crib. The calculations needed to quantify the risk associated with this accident scenario are included within.

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Testing will determine if an ignition occurs during the drop of a Universal Sampler onto a push-mode bit in a flammable gas environment. Ten drops each of the sampler using both a push-mode and rotary mode insert onto a push-mode bit will be completed. If an ignition does not occur under the conditions set forth in this test, then a satisfactory level of confidence will be obtained which would allow field operations using these inserts and drill bit.