This document defines the acceptance criteria for the Automated Transportation Management System V2.0 Logistics Module Performance Based Incentive (PBI). This acceptance criteria will be the primary basis for the generation of acceptance test procedures. The purpose of this document is to define the minimum criteria that must be fulfilled to guarantee acceptance of the Logistics Module.

The purported advantages of the Evanohm alloy were not observed in this preliminary study. Under the deposition conditions, the Evanohm alloy produced a greater variation in resistance of the as-deposited thin films than the Tophet alloy currently in use for producing resistors. A broader screening experiment for optimum operating conditions for the Evanohm wire is recommended.

As the nuclear weapon arsenals of the United States and the Former Soviet Union are reduced, metric tonnage quantities of fissile material must be dispositioned. One of the potential disposition options for fissile weapons material is vitrification into a stable form -- essentially a plutonium or uranium single phase glass product. Savannah River Technology Center (SRTC) at Savannah River Site (SRS) is actively developing suitable glass formulations for the long term safe storage of plutonium and uranium. These investigations are also being extended to develop glasses for the stabilization and storage of kilogram amounts of neptunium, americium, and curium that are currently stored as solutions in the process canyons at SRS -- thus the glasses are called actinide glasses. SRTC is also in the process of developing a remote process demonstration which can produce metric tonnage quantities of the glasses. This paper discusses the chemical compositions and durabilities of two types of actinide glasses under development. One of the glasses is a borosilicate, and the other an iron phosphate. In this initial study thorium and uranium were used as the actinides. Because of the low radioactivity of these elements, the glasses could be prepared and tested on the bench top. …

Testing was performed to determine actual damage to drums when dropped from higher than currently stacked elevations. The drum configurations were the same as they are placed in storage; single drums and four drums banded to a pallet. Maximum drop weights were selected based on successful preliminary tests. Material was lost from each of the single drum tests while only a small amount of material was lost from one of the pelletized drums. The test results are presented in this report. This report also provides recommendations for further testing to determine the appropriate drum weight which can be stored on a fourth tier.

This report investigates the impact of random errors due to measurement and sampling on the reported concentrations of radionuclides in DWPF`s filled canister inventory resulting from each macro-batch. The objective of this investigation is to estimate the variance of the total error in reporting these radionuclide concentrations.

Experiments have been carried out to measure the dynamic cavity growth of dry sand during penetration by particulated jets from Viper 65-mm-diameter, Cu-lined conical shaped charges at 1,000-mm standoff. The sand target was instrumented with foil switches, piezoelectric pins, and pressure transducers. Flash radiography at 450-keV was used to characterize the jets before impact and to image the target hole during jet penetration. The authors have developed a dry sand equation of state based on existing Hugoniot data as input to a porous material model incorporated in the 2-D arbitrary Lagrangian-Eulerian hydrocode CALE. They have carried out sand penetration simulations in which the particulated jet is modeled as hot copper rods. By varying parameters in the sand and copper descriptions they identify those features that affect the dynamic cavity formation.

The Genetic Privacy Act is a proposal for federal legislation. The Act is based on the premise that genetic information is different from other types of personal information in ways that require special protection. The DNA molecule holds an extensive amount of currently indecipherable information. The major goal of the Human Genome Project is to decipher this code so that the information it contains is accessible. The privacy question is, accessible to whom? The highly personal nature of the information contained in DNA can be illustrated by thinking of DNA as containing an individual`s {open_quotes}future diary.{close_quotes} A diary is perhaps the most personal and private document a person can create. It contains a person`s innermost thoughts and perceptions, and is usually hidden and locked to assure its secrecy. Diaries describe the past. The information in one`s genetic code can be thought of as a coded probabilistic future diary because it describes an important part of a unique and personal future. This document presents an introduction to the proposal for federal legislation `the Genetic Privacy Act`; a copy of the proposed act; and comment.

The Genetic Privacy Act is a proposal for federal legislation. The Act is based on the premise that genetic information is different from other types of personal information in ways that require special protection. Therefore, to effectively protect genetic privacy unauthorized collection and analysis of individually identifiable DNA must be prohibited. As a result, the premise of the Act is that no stranger should have or control identifiable DNA samples or genetic information about an individual unless that individual specifically authorizes the collection of DNA samples for the purpose of genetic analysis, authorized the creation of that private information, and has access to and control over the dissemination of that information.

This report provides a hazard categorization of the 105 K East and 105 K West in-basin activities associated with the fuel sampling and transport preparations. It is limited to those characterization activities performed in the 105 KE and 105 KW fuel storage basin structures. The methodology of DOE standard DOE-STD-10227-92 is used. The report documents the determination that the in-basin activities associated with the fuel characterization program are classified as Hazard Category 3 (hazard analysis shows the potential for only significant localized consequences).

Image-converter (IC) camera photography has provided spectacular images and quantitative records of liner collapse and early jet formation in shaped charges. We have extended the application of the IC camera to observations of shaped charge jet surfaces undergoing particulation. Sequential, high-resolution photographs were taken following the same 10-cm portion of jet at 2.5-{mu}s intervals. Simultaneous color rotating-mirror framing camera photographs and 450-keV flash x-ray radiographs were also taken of the same region. This combination provides a detailed record of the evolution of surface structure during jet necking and particulation. In the high-resolution photographs, individual features on the jet surfaces as small as {approximately}100 {mu}m can easily be detected and followed as they evolve over time. The jet surface structure is rough with overlapping slip dislocation lines running along the surface at 45{degree} to either side of the jet axis. This is similar to the texture that develops in long rods undergoing static tension. We discuss the implications of these images for increasing jet particulation times.

The overall objectives of this project were: (1) to examine experimentally, for major crop species, the interacting effects of CO{sub 2} concentration, temperature, and water availability on plant growth and development, (2) to model these interactions, and (3) to continue developing physiologically-based mechanistic models for predicting crop response to increased CO{sub 2} concentration and future global climate change. To meet these objectives, controlled-environment studies were conducted on cotton, lemon, rice, and soybean and a long-term open-top chamber study was continued on orange. Much progress was made on development of plant growth models for cotton, wheat, rice, and soybean. In addition, there were two special modeling efforts which have the potential for contributing to all of the crop models. These efforts are concerned with modeling root growth and physical and chemical processes in soil and with modeling the effect of stomatal aperture on photosynthesis and transpiration rates as a function of CO{sub 2} concentration, temperature, and vapor pressure deficit. The root growth and soil process modeling is important because it enables us to estimate the water available to the plant. The modeling of effects of stomatal aperture on photosynthesis and transpiration rates enables them to estimate dry weight gain and water …

An undetermined amount of debris remains in the K-Basins which must be removed. Due to the different types of debris that will be removed, a variety of tools will be required to complete this project. This test plan gives s broad scope of the requirements that will be used for testing equipment for K-Basin debris removal. The equipment tested will be used in a radioactive environment. The equipment tested will be used to retrieve, cut, clean, and package debris from both K West and K East Basins. Testing is typically divided into six primary categories: development testing, acceptance testing, qualification testing, pre-operational testing, operational testing, and production/process testing.

The objective of this research is to develop a mechanistic understanding of the oxidation of coal and coal pyrite, and to correlate the intrinsic physical and chemical properties of these minerals, along with changes resulting from oxidation, with those surface properties that influence the behavior in physical cleaning processes. Work during the eighteenth quarter has focused on severe oxidation of coal by thermal and chemical treatment, and on investigating the partition of metal ions between such strongly oxidized coal samples and aqueous solutions. This partitioning behavior is being followed to obtain further information on the chemistry of the coal surfaces after different oxidation treatments, for example, whether partition occurs by an ion-exchange mechanism, or whether the surface is capable of changing the oxidation state of metallic species, with concurrent surface or bulk precipitation.

The Rotary Mode Core Sample System (RMCSS) is used to obtain stratified samples of the waste deposits in single-shell and double-shell waste tanks at the Hanford Site. The samples are used to characterize the waste in support of ongoing and future waste remediation efforts. Four sampling trucks have been developed to obtain these samples. Truck I was the first in operation and is currently being used to obtain samples where the push mode is appropriate (i.e., no rotation of drill). Truck 2 is similar to truck 1, except for added safety features, and is in operation to obtain samples using either a push mode or rotary drill mode. Trucks 3 and 4 are now being fabricated to be essentially identical to truck 2.

This document, prepared for the Worldwide Port System (WPS) Regional Integrated Cargo Database (ICDB), provides standards and conventions for the screens developed using ORACLE`s SQL*Menu, SQL*Forms, and SQL*Reportwriter; for the ORACLE keys; and for commenting ORACLE code. It also covers standards for database system transfers. The results of adherence to these standards and conventions by all developers at both geographically separated development sites, Oak Ridge National Laboratory (ORNL) and The Military Traffic Management Command`s Eastern Area (EA), will be a consistent appearance of ICDB to users, code that is easily maintained, and a system that will be quicker to develop and integrate. This final report of the Standards and Conventions contains general guidelines to be followed for the development of the ICDB user interface screens. Though additional ICDB user interface screens are being developed both at ORNL and EA, and existing screens may have fields added to or deleted from them, the standards and conventions presented in this document should remain unchanged.

This analysis evaluates the structural design adequacy of several components and connections for the rotary mode core sampler truck (RMCST) No. 2. This analysis was requested by the Characterization Equipment Group (WHC 1994a). The components addressed in this report are listed below: front jack assembly and connection to the truck chassis; rear jack assembly and connection to the truck chassis; center outrigger jacks and connection to the truck chassis; lower frame assembly and connection to the truck chassis; bolt connections for bearing plate assembly (for path of maximum load); traverse slide brackets and mounting of the traverse jack cylinders; and drill rod (failure loads).

The Hanford Site, located in southeastern Washington State, is operated by the US Department of Energy (DOE) and its contractors. Starting in 1943, Hanford supported fabrication of reactor fuel elements, operation of production reactors, processing of irradiated fuel to separate and extract plutonium and uranium, and preparation of plutonium metal. Processes used to recover plutonium and uranium from irradiated fuel and to recover radionuclides from tank waste, plus miscellaneous sources resulted in the legacy of approximately 227,000 m{sup 3} (60 million gallons) of high-level radioactive waste, currently in storage. This waste is currently stored in 177 large underground storage tanks, 28 of which have two steel walls and are called double-shell tanks (DSTs) an 149 of which are called single-shell tanks (SSTs). Much of the high-heat-emitting nuclides (strontium-90 and cesium-137) has been extracted from the tank waste, converted to solid, and placed in capsules, most of which are stored onsite in water-filled basins. DOE established the Tank Waste Remediation System (TWRS) program in 1991. The TWRS program mission is to store, treat, immobilize and dispose, or prepare for disposal, the Hanford tank waste in an environmentally sound, safe, and cost-effective manner. Technology will need to be developed or improved to …

In 1997 NASA will launch the Cassini scientific probe to the planet Saturn. Electric power for this probe will be provided by Radioisotope Thermoelectric Generators thermally driven by General Purpose Heat Source modules.

This computer software management configuration plan covers the control of the software for the monitor and control system that operates the Effluent Treatment Facility and its associated truck load in station and some key aspects of the Liquid Effluent Retention Facility that stores condensate to be processed. Also controlled is the Treated Effluent Disposal System`s pumping stations and monitors waste generator flows in this system as well as the Phase Two Effluent Collection System.

The electron-proton instability in the IPNS-Upgrade RCS is investigated in this report. A dispersion relation applicable to the coasting beam is derived, and the approximations used are stated in order to facilitate the understanding of the underlying mechanism of the instability. The threshold of instability in terms of neutralization of the circulating beam is found for the IPNS-Upgrade RCS. The dependence of threshold on the beam size and the lattice tune is also studied and its numerical results are presented.

Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. 16 figs., 66 tabs.

The Lawrence Livermore National Laboratory (LLNL) Plutonium Facility conducts numerous programmatic activities involving plutonium to include device fabrication, development of improved and/or unique fabrication techniques, metallurgy research, and laser isotope separation. A Safety Analysis Report (SAR) for the building 332 Plutonium Facility was completed in July 1994 to address operational safety and acceptable risk to employees, the public, government property, and the environmental. This paper outlines the PRA analysis of the Evaluation Basis Fire (EBF) operational accident. The EBF postulates the worst-case programmatic impact event for the Plutonium Facility.

This document contains deliverables which reflect the last of the System Architecture phase analysis for the Quality, Environmental, Safety Tracking System redesign (QUEST2) project. These deliverables are focused on the final insights required to start functional design of the first QUEST2 release. They include the data definitions, conversion rules, standards for design and user interface, performance criteria, and rules to be followed during the prototyping activity described in the Project Management Plan.

This document contains the system architecture and related documents which were developed during the Preliminary Analysis/System Architecture phase of the Quality, Environmental, Safety T-racking System redesign (QUEST2) project. Each discreet document in this deliverable set applies to a analytic effort supporting the architectural model of QUEST2. The P+ methodology cites a list of P+ documents normally included in a ``typical`` system architecture. Some of these were deferred to the release development phase of the project. The documents included in this deliverable set represent the system architecture itself. Related to that architecture are some decision support documents which provided needed information for management reviews that occurred during April. Consequently, the deliverables in this set were logically grouped and provided to support customer requirements. The remaining System Architecture Phase deliverables will be provided as a ``Supporting Documents`` deliverable set for the first release.